2BTFH-A9Wifi camera

Section Company n Address: R Product Na FCC ID: 2B Model(s): A 2.911(d)(5) We, [Guan g for which a  Pro  Ide n Yours sinc e Name: Hel e Title: CEO Company n Signature: NOTE 1 “Covered List https://www.f c References; 1) 986446 D 0 https://apps.fc 2) Federal R e https://www.fe munications-s Guang 2.911(d) name: Guan Room 301-3 ame: Wifi ca BTFH-A9 A9, A10, A11 (i) Equipme gzhou Andw uthorization hibited from ntified as an erely, en Zhang name: Guan ”; is the List o cc.gov/supplyc 01 Covered Eq cc.gov/oetcf/kd egister docume ederalregister. supply-chain-t gzhou An )(5)(i) Ce ngzhou And 02, No. 6, G amera 1 ent Type way Intellige n is sought t m receiving n equipmen ngzhou And of Equipment a chain/covered quipment v01 db/forms/FTS ent 2022-2826 gov/documen hrough-the ndway I ertificatio dway Intellig Gangxi Roa ent Equipm through cer an equipme nt type in the dway Intellig and Services C list SearchResul t 63 published o nts/2023/02/06 ntelligen on – Equi gent Equipm ad, Dashi St ent Co., Ltd rtification is ent authoriz e “Covered gent Equipm Covered By S tPage.cfm?sw on 02/06/23 6/2022-28263/ nt Equip 2. ipment T ment Co., Lt treet, Panyu d.] (“the app not: zation pursu List”NOTE Date: Dec. ment Co., Lt ection 2 of Th witch=P&id=32 /protecting-ag pment C 911 (d)(5)(i) Eq Type td. u District, G plicant”) cert uant to § 2.9 1 03, 2025 td. e Secure Netw 5672 ainst-national - o., Ltd. quipment Type A Guangzhou, tify that the 903; of the F works Act, ava -security-threa Attestation v1.2 China equipmen t FCC rules. ailable at ats-to-the-com 2 t m

Section Company n Address: R Product Na FCC ID: 2B Model(s): A 2.911(d)(5 ) We, [Guang of the filing 2 ,establishe equipment. Yours sinc e Name: Hel e Title: CEO Company n Signature: NOTE 1 Delete option NOTE 2 “Covered List https://www.f c References; 1) 986446 D 0 https://apps.fc 2) Federal Re https://www.fe munications-s Guang 2.911(d) name: Guan Room 301-3 ame: Wifi ca BTFH-A9 A9, A10, A11 )(ii) Applica gzhou Andw of the appl ed pursuant erely, en Zhang name: Guan not applicable ”; is the List o cc.gov/supplyc 01 Covered Eq cc.gov/oetcf/kd egister docume ederalregister. supply-chain-t gzhou An )(5)(ii) Ce ngzhou And 02, No. 6, G amera 1 ant filing way Intellige ication, the t to §1.5000 ngzhou And e to this applic of Equipment a chain/covered quipment v01 db/forms/FTS ent 2022-2826 gov/documen hrough-the ndway I ertificatio dway Intellig Gangxi Roa ent Equipm applicant i s 02 of this ch dway Intellig cation. and Services C list SearchResul t 63 published o nts/2023/02/06 ntelligen on – App gent Equipm ad, Dashi St ent Co., Ltd s not ident hapter, as a gent Equipm Covered By S tPage.cfm?sw on 02/06/23 6/2022-28263/ nt Equip plicant (C ment Co., Lt treet, Panyu d.] (“the app ified NOTE 1 o n entity pro Date: Dec. ment Co., Lt ection 2 of Th witch=P&id=32 /protecting-ag pment C 2.911 (d)(5 Covered L td. u District, G plicant”) cert n the “Cove ducing cove 03, 2025 td. e Secure Netw 5672 ainst-national - o., Ltd. 5)(ii) Applicant A List ) Guangzhou, tify that, as ered List” NOT ered comm works Act, ava -security-threa Attestation v1.3 China of the dat e TE unications ailable at ats-to-the-com 3 e m

Co m Ad d Chin Pr o Mo d Pr o We act We an d issu our Sig Na m Title Com mpany: Gu dress: Roo na oduct Name del Numbe oduct Desc authorize M on our beha declare tha d certificatio ues concern behalf shal nature: me: e: mpany: Guang angzhou An m 301-302, e: Wifi came er(s): A9, A1 ription: Wif MiCOM Lab alf on all ma at MiCOM L n of equipm ning the app ll have the s Helen Zh a CEO Guangzho gzhou And Agen ndway Intel , No. 6, Gan era 10, A11 fi camera bs Inc., 575 atters conce Labs Inc. is ment to the r proval applic same effect ang ou Andway dway Intellig nt Auth ligent Equip ngxi Road, Boulder C o erning the c allowed to f regulatory a cation. Any t as acts of y Intelligen gent Equip horizat pment Co., Dashi Stre e ourt, Pleasa certification forward all i agencies as and all acts our own. t Equipme pment Co., tion Ltd. et, Panyu D anton, Califo of above na information s required a s carried ou Date: nt Co., Ltd Ltd. District, Gua ornia 94566 amed equip related to t nd to discu ut by MiCOM Dec. 03, 20 d. ngzhou, 6, USA, to pment. the approva ss any M Labs on 025 al

Office o Federa 7435 O Columb USA Subjec t FCC ID To Wh o Pursua are req u docume These d propriet might b In addi t in Title busine s authoriz For 4 O For 1 It is ou r corresp docume authoriz Sincer e Signat u Name: Title: C Guang of Engineeri l Communic Oakland Mills bia, MD 210 t; Request f D: 2BTFH-A9 om It May C nt to the pro uesting the ents from pu documents tary informa be harmful to Schemat Block Di Parts Lis Operatio SOFTW tional to abo 47 CFR §2 ss sensitive zed devices External Test Set Internal P User Ma 45 days, pu OR 180 days pu r understand pondence du ents and thi zation is iss ely, ure: Helen Zha n EO zhou A ing Techno cations Com s Road 046 for Confiden 9 Concern, ovisions of t Commissio ublic disclos contain det ation in ope o our comp tic Diagram agram st onal Descrip WARE SECU ove mention .803 and th informatio n s, we reque Photos tup Photos Photos anual rsuant to P u ursuant to K ding that all uring the ce s informatio sued. ng Andway logy mmission ntiality the Commis on to withho sure indefin tailed syste ration of th e any and wo m ption URITY DES ned docume e importatio n remains c st Short Te ublic Notice KDB 726920 l measurem ertification re on will be av Intellige ssion’s rule old the follow nitely. m and equi e equipmen ould give co SCRIPTION ents, in orde on rules in T confidential rm Confide e DA 04-170 0 D01. ment test rep eview proce vailable for ent Equ s Title 47 S wing attach pment desc nt. The publ ompetitors a er to comply Title 47 CFR until the act ntiality of th 05. ports, FCC ess cannot public revi e uipment Sections §0. hment(s) as criptions an ic disclosu r an unfair ad y with the m R §2.1204, tual market he following ID label for be granted ew once the t Co., Lt Date: Dec. 457 and § 0 confidentia d are consi re of these d vantage in marketing re while ensu ting of newly attachmen mat and as confide n e grant of eq td. 03, 2025 0.459, we al dered as documents the market . egulations ring that y t(s); ntial quipment .

To W We, Nu m prod Test Ple a Sig Na m Title Gu Whom It May Guangzhou mber: A9, A1 duct color an t sample mo ase contact m nature: me: H e: C uangzho Mo y Concern, u Andway Inte 0, A11; All m d model nam del: A9. me if you hav Helen Zhang CEO ou Andwa odel Di elligent Equi model’s the fu med different ve any quest g ay Intelli fferenc pment Co., L unction, softw t. tion. gent Equ ce Dec Ltd. (Wifi cam ware and ele uipment claratio mera); Trade ectric circuit a Date: Co., Ltd on e Mark: N/A, are the same Dec. 03, 2 . Model e, only with a 025 a

FCC ID LABEL: Ca. 20mm x 10mm Label Location FCC ID: 2BTFH-A9

MPE ESTIMATION FCC ID: 2BTFH-A9 1, According to §1.1310, Limit for General Population/ Uncontrolled Exposures Frequency Power density (mW/ cm 2 ) Averaging time(minutes) 300MHz----1.5GHz F/1500 30 1.5GHz---100GHz 1.0 30 Note: F= Frequency in MHz 2, Estimation Result For WIFI: Mode Max PK Output power(dBm) Tune Up Power(dBm) Max Tune Up power(mW) Antenna Gain(dBi) Antenna Gain (Numerical) MPE (mW/cm²) 2412 14.70 14±1(15) 31.62 3.56 2.27 0.01429 5785 10.33 10±1(11) 12.59 3.29 2.13 0.00535 Note: Note: The estimation distance is 20cm Note: PK Output power= conducted power in mW. G=power gain of the antenna in the direction of interest relative to an isotropic radiator R=distance to the center of radiation of the antenna in cm Conducted power see the test report HK2511146176-1E/2E, 2.4GWIFI antenna gain=3.56dBi; 5.8GWIFI antenna gain=3.29dBi when the minimum test separation distance is >20 cm, a distance of 20 cm is applied to determine RF Exposure test exclusion. The test exclusion threshold is 0.01429 which is< 1.0, RF Exposure testing is not required. Note: the device could not transmit simultaneously in 2.4G and 5G. -------The End-------

Manufacturer: Shenzhen Zhouda Communication Electronics Co., Ltd. Page 1 Version：1.0 Issue Date2025-6-16 Address: Room 716, Maker Building, No. 72-6, Huanguan South Road, Xintian Community, Guanhu Subdistrict, Longhua District, Shenzhen, China Product specification CUSTOMER： Zhongxsd CUSTOMER P/N : ZD-368 OUR MODEL NO： ZD 2400-5900CSW-L190 SPECIFICATIONS：（SQ02WIFI）-2.4G/5.8GDual-frequency Black ultrasonic antenna 1.13 gray outlet 190MM with terminal QTY： 5 DATE: 2025-6-16 Shenzhen zhouda communication electronics co., ltd Customer recognition Engineering Quality Approved Signature (seal) xie Huang Manufacturer: Shenzhen Zhouda Communication Electronics Co., Ltd. Page 2 Version：1.0 Issue Date2025-6-16 Address: Room 716, Maker Building, No. 72-6, Huanguan South Road, Xintian Community, Guanhu Subdistrict, Longhua District, Shenzhen, China 1. Technical Specification Technical specifications A. Electrical Characteristics Working Frequency Range 2400~5900MHz S.W.R. 2400~5900MHz:<2.0 Antenna Gain(avg.) 2400~5900MHz: 3.5dBi±0.5dBi Impedance 50ohm B. Material brass C. Environmental Operation Temperature -45°C~+85°C Storage Temperature -45°C~+85°C 2. Matching Circuits matching circuit Element Value Vender E1(0402) OPEN / E2(0402) SHORT 50 Ω E3(0402) OPEN / Manufacturer: Shenzhen Zhouda Communication Electronics Co., Ltd. Page 3 Version：1.0 Issue Date2024-12-12 Address: Room 716, Maker Building, No. 72-6, Huanguan South Road, Xintian Community, Guanhu Subdistrict, Longhua District, Shenzhen, China Note: Matching has not changed.。 3. Passive testing The S1 1 parameter was performed using a Agilent 87 53 D Network Analyzer and BEST’S test fixture that was using customer-providing device. VSWR (Voltage standing wave ratio) The Voltage Standing Wave Ratio (VSWR) is an indication of how good the impedance match is. VSWR is often abbreviated as SWR. If the transmission line and the antenna are not matched, the antenna will not accept all the power from the transmission line. The part it does not accept is reflected back and forth between the transmitter and the antenna. This sets up a fixed wave pattern along the line which we can measure and which is called the voltage standing wave ration(VSWR).The VSWR (ratio of maximum voltage to the minimum voltage along the line)expresses the degree of match between the transmission line and the antenna. When the VSWR is 1 to 1 (1 :1 ) the match is perfect and all the energy is transferred to the antenna prior to be radiated. When the VSWR is 1.5 :1 , 96 % of the power reaches the antenna. By definition VSWR can never be less than 1.VSWR and reflected power are different ways of measuring and expressing the same thing. A high VSWR is indication that the signal is reflected prior to being radiated by the antenna. standing wave VSWR Marker 2400MHz 2450MHz 2500MHz 5100MHz 5900MHz S.W.R ≤2.0 ≤2.0 ≤2.0 ≤2.0 ≤2.0 Curing antenna S11 Testing Result. Manufacturer: Shenzhen Zhouda Communication Electronics Co., Ltd. Page 4 Version：1.0 Issue Date2025-6-16 Address: Room 716, Maker Building, No. 72-6, Huanguan South Road, Xintian Community, Guanhu Subdistrict, Longhua District, Shenzhen, China 4. Test 3D report frequency：24 00 MHZ increase：3 .08 dbi frequency：59 00 MHZ increase：3 .55 dbi Passive test data Manufacturer: Shenzhen Zhouda Communication Electronics Co., Ltd. Page 5 Version：1.0 Issue Date2024-12-12 Address: Room 716, Maker Building, No. 72-6, Huanguan South Road, Xintian Community , Guanhu Subdistrict, Longhua District, Shenzhen, China 6.Product appearance diagram Product physical 2.4G-5.8G dual-frequency Black ultrasonic antenna 1.13 gray line outlet length 190MM. Salt spray test Test purpose: To test the salt spray corrosion resistance of the antenna. Test method: Solution content: 5% sodium chloride solution (prepared with distilled water, 95 ml distilled water +5 g sodium chloride) Put the antenna into the salt spray test box and hang it with a rope to avoid uneven spraying of the solution or missing the surface. The antenna should be put into the test box immediately. The experimental period is 48 hours. During the experiment, it shall not be taken out in the middle. After the experiment, take out the antenna, clean it with cotton cloth and ion air gun, leave it for 49 hours and dry it at room temperature, and then check its appearance, mechanical properties and electrical properties. Manufacturer: Shenzhen Zhouda Communication Electronics Co., Ltd. Page 6 Version：1.0 Issue Date2025-6-16 Address: Room 716, Maker Building, No. 72-6, Huanguan South Road, Xintian Community, Guanhu Subdistrict, Longhua District, Shenzhen, China laboratory report admi t confi rm dai Tester yang Test content and antenna model: (SQ02WIFI)-2.4G/5.8G dual-frequency white ultrasonic antenna. 1.13 gray outlet 190MM with terminal Test purpose: to test the changes of antenna appearance, mechanical properties and electrical properties in salt fog environment.。 Test quantity：5pcs Before the test project NO. exterior Mechanical properties and electrical properties 1# PASS PASS 2# PASS PASS 3# PASS PASS 4# PASS PASS 5# PASS PASS After the test project NO. 1# PASS PASS 2# PASS PASS 3# PASS PASS 4# PASS PASS 5# PASS PASS Results: After the salt spray test, the appearance is ok, the antenna is in good contact with the motherboard (multimeter test is conducted), and the mechanical properties have not changed. According to the signal test, the standing wave changes in the range of 0.3, which meets the allowable test requirements. . To sum up, the 2.4/5G external antenna meets the requirements of salt spray test.。

Page 1 of 72 Report No.: HK2511146176-1E FCC Test Report Test Report On Behalf of Guangzhou Andway Intelligent Equipment Co., Ltd. For Wifi camera Model No.: A9, A10, A11 FCC ID: 2BTFH-A9 Prepared For: Guangzhou Andway Intelligent Equipment Co., Ltd. Room 301-302, No. 6, Gangxi Road, Dashi Street, Panyu District, Guangzhou, China Prepared By: Shenzhen HUAK Testing Technology Co., Ltd. 1-2/F., Building B2, Junfeng Zhongcheng Zhizao Innovation Park, Heping, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Date of Test: Nov. 14, 2025 ~ Nov. 26, 2025 Date of Report: Nov. 26, 2025 Report Number: HK2511146176-1E Page 2 of 72 Report No.: HK2511146176-1E Test Result Certification Applicant’s Name .................. : Guangzhou Andway Intelligent Equipment Co., Ltd. Address .................................. : Room 301-302, No. 6, Gangxi Road, Dashi Street, Panyu District, Guangzhou, China Manufacturer's Name ........... : Guangzhou Andway Intelligent Equipment Co., Ltd. Address .................................. : Room 301-302, No. 6, Gangxi Road, Dashi Street, Panyu District, Guangzhou, China Product Description Trade Mark ............................. : N/A Product Name ......................... : Wifi camera Model and/or Type Reference : A9, A10, A11 Standards ............................... : FCC Rules and Regulations Part 15 Subpart C Section 15.247 ANSI C63.10: 2020 This publication may be reproduced in whole or in part for non-commercial purposes as long as the Shenzhen HUAK Testing Technology Co., Ltd. is acknowledged as copyright owner and source of the material. Shenzhen HUAK Testing Technology Co., Ltd. takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. Date of Test ............................................ : Date (s) of Performance of Tests ............ : Nov. 14, 2025 ~ Nov. 26, 2025 Date of Issue ........................................... : Nov. 26, 2025 Test Result ............................................... : Pass Testing Engineer Len Liao Technical Manager Sliver Wan Authorized Signatory Jason Zhou Page 3 of 72 Report No.: HK2511146176-1E Table of Contents 1. Summary ................................................................................................... 5 1.1 Test Procedures and Results ........................................................................................................... 5 1.2 Information of the Test Laboratory ................................................................................................. 5 1.3 Measurement Uncertainty ................................................................................................................ 6 2. EUT Description ........................................................................................ 7 2.1 General Description of EUT ............................................................................................................. 7 2.2 Carrier Frequency of Channels ........................................................................................................ 8 2.3 Operation of EUT during Testing ..................................................................................................... 8 2.4 Description of Test Setup ................................................................................................................. 9 2.5 Description of Support Units ......................................................................................................... 10 3. General Information ................................................................................ 11 3.1 Test Environment and Mode .......................................................................................................... 11 4. Test Results and Measurement Data .................................................... 13 4.1 AC Conducted Emission ................................................................................................................ 13 4.2 Maximum Peak Conducted Output Power .................................................................................... 17 4.3 Emission Bandwidth ....................................................................................................................... 20 4.4 Power Spectral Density .................................................................................................................. 26 4.5 Conducted Band Edge and Spurious Emission Measurement .................................................. 33 4.6 Radiated Spurious Emission Measurement ................................................................................. 43 4.7 Antenna Requirement ..................................................................................................................... 69 5. Test Setup Photos of the EUT ............................................................... 70 6. Photos of the EUT ................................................................................... 72 Page 4 of 72 Report No.: HK2511146176-1E ** Modified History ** Revision Description Issued Date Remark Revision 1.0 Initial Test Report Release Nov. 26, 2025 Jason Zhou Page 5 of 72 Report No.: HK2511146176-1E 1. Summary 1.1 Test Procedures and Results Requirement CFR 47 Section Result Antenna Requirement §15.203/§15.247(b)(4) PASS AC Power Line Conducted Emission §15.207 PASS Conducted Peak Output Power §15.247(b)(3) PASS 6dB Emission Bandwidth §15.247(a)(2) PASS Power Spectral Density §15.247(e) PASS Band Edge §15.247(d) PASS Spurious Emission §15.205/§15.209 PASS Note: 1. PASS: Test item meets the requirement. 2. Fail: Test item does not meet the requirement. 3. N/A: Test case does not apply to the test object. 4. The test result judgment is decided by the limit of test standard. 1.2 Information of the Test Laboratory Shenzhen HUAK Testing Technology Co., Ltd. Add.: 1-2/F., Building B2, Ju…

Text truncated - open the document above for the full version.

Page 33 of 72 Report No.: HK2511146176-1E 4.5 Conducted Band Edge and Spurious Emission Measurement Test Specification Test Requirement: FCC Part15 C Section 15.247 (d) Test Method: KDB 558074 D01 15.247 Meas Guidance v05r02 Limit: In any 100 kHz bandwidth outside of the authorized frequency band, the emissions which fall in the non-restricted bands shall be attenuated at least 20 dB / 30dB relative to the maximum PSD level in 100 kHz by RF conducted measurement and radiated emissions which fall in the restricted bands, as defined in Section 15.205(a), must also comply with the radiated emission limits specified in Section 15.209(a). Test Setup: Test Mode: Transmitting mode with modulation Test Procedure: 1. The testing follows FCC KDB Publication 558074 D01 15.247 Meas Guidance v05r02. 2. The RF output of EUT was connected to the spectrum analyzer by RF cable. The path loss was compensated to the results for each measurement. 3. Set to the maximum power setting and enable the EUT transmit continuously. 4. Set RBW = 100 kHz, VBW=300 kHz, Peak Detector. Unwanted Emissions measured in any 100 kHz bandwidth outside of the authorized frequency band shall be attenuated by at least 20 dB relative to the maximum in-band peak PSD level in 100 kHz when maximum peak conducted output power procedure is used. If the transmitter complies with the conducted power limits based on the use of RMS averaging over a time interval, the attenuation required under this paragraph shall be 30 dB instead of 20 dB per 15.247(d). 5. Measure and record the results in the test report. 6. The RF fundamental frequency should be excluded against the limit line in the operating frequency band. Test Result: PASS Page 34 of 72 Report No.: HK2511146176-1E Test Instruments RF Test Room Equipment Manufacturer Model Serial Number Calibration Date Calibration Due Spectrum analyzer Agilent N9020A HKE-025 Feb. 19, 2025 Feb. 18, 2026 Spectrum analyzer Agilent N9020A HKE-117 Feb. 19, 2025 Feb. 18, 2026 High pass filter unit Tonscend JS0806-F HKE-055 Feb. 19, 2025 Feb. 18, 2026 RF Cable (9KHz-26.5GHz) Tonscend 170660 N/A Feb. 19, 2025 Feb. 18, 2026 RF automatic control unit Tonscend JS0806-2 HKE-060 Feb. 19, 2025 Feb. 18, 2026 RF Test software Tonscend JS1120-3 Version 3.5.39 HKE-083 N/A N/A Note: The calibration interval of the above test instruments is 12 months and the calibrations are traceable to international system unit (SI). Page 35 of 72 Report No.: HK2511146176-1E Test Data 802.11b Modulation Lowest Channel Highest Channel Band Edge Band Edge Spurious Emission Spurious Emission Page 36 of 72 Report No.: HK2511146176-1E Middle Channel Spurious Emission Page 37 of 72 Report No.: HK2511146176-1E 802.11g Modulation Lowest Channel Highest Channel Band Edge Band Edge Spurious Emission Spurious Emission Page 38 of 72 Report No.: HK2511146176-1E Middle Channel Spurious Emission Page 39 of 72 Report No.: HK2511146176-1E 802.11n (HT20) Modulation Lowest Channel Highest Channel Band Edge Band Edge Spurious Emission Spurious Emission Page 40 of 72 Report No.: HK2511146176-1E Middle Channel Spurious Emission Page 41 of 72 Report No.: HK2511146176-1E 802.11n (HT40) Modulation Lowest Channel Highest Channel Band Edge Band Edge Spurious Emission Spurious Emission Page 42 of 72 Report No.: HK2511146176-1E Middle Channel Spurious Emission Page 43 of 72 Report No.: HK2511146176-1E 4.6 Radiated Spurious Emission Measurement Test Specification Test Requirement: FCC Part15 C Section 15.209 Test Method: ANSI C63.10: 2020 Frequency Range: 9 kHz to 25 GHz Measurement Distance: 3 m Antenna Polarization: Horizontal & Vertical Operation Mode: Transmitting mode with modulation Receiver Setup: Frequency Detector RBW VBW Remark 9kHz- 150kHz Quasi-peak 200Hz 1kHz Quasi-peak Value 150kHz- 30MHz Quasi-peak 9kHz 30kHz Quasi-peak Value 30MHz-1GHz Quasi-peak 120KHz 300KHz Quasi-peak Value Above 1GHz Peak 1MHz 3MHz Peak Value Peak 1MHz 10Hz Average Value Limit: Frequency Field Strength (microvolts/meter) Measurement Distance (meters) 0.009-0.490 2400/F(KHz) 300 0.490-1.705 24000/F(KHz) 30 1.705-30 30 30 30-88 100 3 88-216 150 3 216-960 200 3 Above 960 500 3 Frequency Field Strength (microvolts/meter) Measurement Distance (meters) Detector Above 1GHz 500 3 Average 5000 3 Peak Test Setup: For radiated emissions below 30MHz Page 44 of 72 Report No.: HK2511146176-1E 30MHz to 1GHz Above 1GHz Test Procedure: 1. For the radiated emission test below 1GHz: The EUT was placed on a turntable with 0.8 meter above ground. The EUT was set 3 meters from the interference receiving antenna, which was mounted on the top of a variable height antenna tower. The EUT was arranged to its worst case and then tune the antenna tower (from 1 m to 4 m) and turntable (from 0 degree to 360 degrees) to find the maximum reading. A pre-amp and a high PASS filter are used for the test in order to get better signal level. 2. For the radiated emission test above 1GHz: Place the measurement antenna on a turntable with 1.5 meter above ground, which is away from each area of the EUT determined to be a source of emissions at the specified measurement distance, while keeping the measurement antenna aimed at the source of emissions at each frequency of significant emissions, with polarization oriented for maximum response. The measurement antenna may have to be higher or lower than the EUT, depending on the radiation pattern of the emission and staying aimed at the emission source for receiving the maximum signal. Page 45 of 72 Report No.: HK2511146176-1E The final measurement antenna elevation shall be that which maximizes the emissions. The measurement antenna elevation for maximum emissions shall be restricted to a range of heights of from 1 m to 4 m above the ground or reference ground plane. 3. Corrected Reading: Antenna Factor + Cable Loss + Read Level - Preamp Factor = Level 4. For measurement below 1GHz, If the emission level of the EUT measured by the peak detector is 3 dB lower than the appl…

Text truncated - open the document above for the full version.

Test Model: A9 Radiated Emission AC Conducted Emission RF Conducted Emission