2BTHI-PKL100YSRechargeable Puck Lights with Charging Station

ITM./ART. 2054160 MODEL # PKL100RD-LI-4 4 Puck Lights Finish Color: White Dimensions: Each Puck Light: Φ10 x 2.68 cm / 3.94 x 1.06 in Puck Light with Dock Station: 12.97 x 10.93 x 10 cm / 5.11 x 4.3 x 3.94 in Charging time: 4 Light with dock station ~4 hours Single Light ~3.5 hours Battery type: Built-in rechargeable 3.7V 1800 mAh Li-ion battery Runtime: Continuous on: ~12 hours 1. Turning the light on/off Slide switch to : turn on the light. Before installation, make sure the surface you intend to mount the product on is free of moisture, oil, grease, dust and dirt to ensure proper adhesion. Peel off the protective film and attach the self-adhesive metal disc to a smooth surface, then mount the light magnetically. 1 Dock Station1 Remote Control 1 4 Self-adhesive metal discs Thank you for purchasing this Dawnrise Rechargeable Puck Lights with Dock Station. Please read all instructions before using your new Puck Lights. IMPORTANT: FOR INDOOR AND DRY LOCATION USE ONLY. 10 cm (3.94 in) 2.68 cm (1.06 in) 12.97 cm (5.11 in) 10 cm (3.94 in) 10.93 cm (4.3 in) INSTALLATION WARNING BATTERY REPLACEMENT INSTRUCTIONS TROUBLESHOOTING Slide switch to : turn off the light. 2. Setting the motion detection 3. Adjusting brightness and colors Slide switch to : Set the short detection range. Slide switch to : Set the long detection range. 4. Remote control functions : 50% brightness : Increase brightness : Decrease brightness : Increase color temperature (2700K3000K3500K4000K5000K) : Decrease color temperature (5000K4000K3500K3000K2700K) :Turn the light on. : Turn the light off. :Set the auto-off timer-15 minutes : Set the auto-off timer-30 minutes : Set the auto-off timer-60 minutes The light will turn on for 10 seconds to detect ambient light and turn off. The light will automatically turn on when it detects human presence within its sensor range if there is lack of ambient light. It stays on continuously while the room is occupied, even with no movement detected. It will automatically turn off 20 seconds after no human presence is detected or when there is sufficient ambient light. NOTE: Short detection range: Recommended for enclosed spaces, such as wardrobes and storage cabinets. Long detection range: Recommended for open areas, such as hallways and under kitchen cabinets. To clean, disconnect from the outlet and turn off the product. Wipe with a soft dry cloth. Do not use any cleaner with chemicals, solvents, or harsh abrasives. Recharge every 3 months if stored long-term to preserve battery life. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.This equipment should be installed and operated with minimum distance 20cm between the radiator& your body. This Device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. When using this product, basic precautions should always be followed, including the following: - Changes or modifications to this unit for compliance could void the user's authority to operate the equipment. - Do not contact hot parts. - To reduce the risk of injury, close supervision is necessary when the product is used near children. - Only use attachments recommended or sold by the manufacturer. - Do not use in the rain. - To reduce the risk of electrical shock, do not put light in water or other liquid. Do not place or store product when it can fall or be pulled into a tub or sink. - To reduce the risk of injury, do not stare at operating lamp. Serious eye injury could occur. - This remote control contains a coin battery. - Swallowing coin batteries may cause fatal internal injury within 2 hours. - Keep coin batteries away from children. - If swallowed, get immediate medical help. - Do not dispose of batteries in fire. - Remove batteries if the product will not be used for a long time. - Even used coin cell batteries may cause severe injury or death. - Remove and immediately recycle or dispose of batteries from equipment not used for an extended period of time according to local regulations. - Always completely secure the battery compartment. If the battery compartment does not close securely, stop using the product, remove the batteries, and keep them away from children. - Do not modify, disassemble, open, drop, crush, puncture, or shred battery. - Do not expose the product to rain or water. - Products are for indoor use only. - Avoid exposure to high temperature and direct sunlight. - Risk of fires and burns. Do not open, crush, heat, or incinerate. - Keep product away from open flames to…

Text truncated - open the document above for the full version.

Company Name: Dawnrise Inc. Add: 6215 Regency Parkway NW Suite 910 Norcross, GA 30071 U.S.A. Tel: +1-909-895-7788 Email: [email protected] Date: 2026-08-20 FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 To whom it may concern: Our product Rechargeable Puck Lights with Charging Station, model: PKL100RD-LI-4, FCC ID: 2BTHI-PKL100YS. For marketing purpose, this product only support 5.8G Radar: 5741-5869MHz. The other functions, bands and modes has been shielded by the manufacturer using the software, the end user has no capability to activate it. Sincerely, Signature: Print Name: Franka Yi Title : Sales Manager

Company Name: Dawnrise Inc. Add: 6215 Regency Parkway NW Suite 910 Norcross, GA 30071 U.S.A. Tel: +1-909-895-7788 Email: [email protected] CFR 47 §2.911(d)(5)(i) Attestation Letter Attestation Letter Date: 2026-08-20 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Ref: Attestation Statements CFR 47 §2.911(d)(5)(i) Filing FCC ID: 2BTHI-PKL100YS Dawnrise Inc. certifies that the equipment for which authorization is sought, is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Sincerely, Signature: Print Name: Franka Yi Title : Sales Manager

Company Name: Dawnrise Inc. Add: 6215 Regency Parkway NW Suite 910 Norcross, GA 30071 U.S.A. Tel: +1-909-895-7788 Email: [email protected] CFR 47 §2.911 (d)(5)(ii) Attestation Letter Attestation Letter Date: 2026-08-20 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Ref: Attestation Statements CFR 47 §2.911(d)(5)(ii) Filing FCC ID: 2BTHI-PKL100YS Dawnrise Inc. certifies that as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. We also certify that, as of the date of the filing of the application, the equipment does not utilize cyber-security or anti-virus software from Kaspersky Lab, Inc, or any of its successors and assignees, which is also on the “covered list”. Sincerely, Signature: Print Name: Franka Yi Title : Sales Manager

U.S. AGENT LETTER OF ATTESTATION Date: 2026-08-20 FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Ref: Attestation Statements CFR 47 §2.911(d)(7) Filing FCC ID: 2BTHI-PKL100YS Dawnrise Inc. certifies that, as of the date of the filing of the application, Dawnrise Inc. is our designated U.S. agent for service of process for the above referenced FCC ID. Dawnrise Inc. accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Dawnrise Inc. accepts, as of the date of the filing of the application, the obligation of the designated U.S. agent for service of process for the above referenced FCC ID. Designated U.S. Agent and Applicant Information: Name: Dawnrise Inc. Address: 6215 Regency Parkway NW Suite 910 Norcross, GA 30071 U.S.A. FRN: 0037706074 Tel.: +1-909-895-7788 Email: [email protected] Signed by (printed name): Franka Yi Signature:

Company Name: Dawnrise Inc. Add: 6215 Regency Parkway NW Suite 910 Norcross, GA 30071 U.S.A. Tel: +1-909-895-7788 Email: [email protected] QA-FR-170-B 7/29/2014 FCC Authorization Date: 2026-08-20 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Agent Authorization To whom it may concern: We, Dawnrise Inc. the undersigned, hereby authorizes Bay Area Compliance Laboratories Corp. (Dongguan) to act on its behalf in all matters relating to application for Equipment authorization, including the signing of all documents relating to these matters. All acts carried out by Bay Area Compliance Laboratories Corp. (Dongguan). on our behalf shall have the same effect as our own action. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. This authorization is valid until further written notice from the applicant. Sincerely Yours, Signature: Print Name: Franka Yi Title : Sales Manager

Company Name: Dawnrise Inc. Add: 6215 Regency Parkway NW Suite 910 Norcross, GA 30071 U.S.A. Tel: +1-909-895-7788 Email: [email protected] FCC Confidential Authorization Date: 2026-08-20 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Confidentiality Request regarding application for certification of FCC ID: 2BTHI-PKL100YS In accordance with Sections 0.457 and 0.459 of the Commission’s Rules, Dawnrise Inc. hereby requests long-term confidential treatment of information accompanying this application as outlined below: Block Diagram Schematics Operation Description The above materials contain proprietary and confidential information not customarily released to the public. The public disclosure of these materials provides unjustified benefits to its competitors in the market. Sincerely Yours, Signature: Print Name: Franka Yi Title : Sales Manager

Bay Area Compliance Laboratories Corp. (Dongguan) EXHIBIT No.: 2602T07213E-RF-EXP Page 1 / 7 EUT EXTERNAL PHOTOS Bay Area Compliance Laboratories Corp. (Dongguan) EXHIBIT No.: 2602T07213E-RF-EXP Page 2 / 7 Bay Area Compliance Laboratories Corp. (Dongguan) EXHIBIT No.: 2602T07213E-RF-EXP Page 3 / 7 Bay Area Compliance Laboratories Corp. (Dongguan) EXHIBIT No.: 2602T07213E-RF-EXP Page 4 / 7 Bay Area Compliance Laboratories Corp. (Dongguan) EXHIBIT No.: 2602T07213E-RF-EXP Page 5 / 7 Bay Area Compliance Laboratories Corp. (Dongguan) EXHIBIT No.: 2602T07213E-RF-EXP Page 6 / 7 Bay Area Compliance Laboratories Corp. (Dongguan) EXHIBIT No.: 2602T07213E-RF-EXP Page 7 / 7 *****END *****

RECHARGEABLE PUCK LIGHTS WITH DOCK STATION LUMIÈRES RONDES RECHARGEABLES AVEC STATION DE RECHARGE MODEL:PKL100RD-LI-4 INPUT:5V DC, 800mA MAX BATTERY: 3.7V, 1800mAh, NON-REPLACEABLE LI-ION BATTERY. MODÈLE : PKL100RD-LI-4 ENTRÉE : 5 V C.C., 800 mA MAX PILE : 3.7 V, 1800 mAh, PILE AUX IONS DE LITHIUM NON REMPLAÇABLE. FCC ID: 2BTHI-PKL100YS 2.9mm DEL ET PILE NON-REMPLAÇABLE Label and label location

Bay Area Compliance Laboratories Corp. (Dongguan) EXHIBIT No.: 2602T07213E-RF-INP Page 1 / 5 EUT INTERNAL PHOTOS Bay Area Compliance Laboratories Corp. (Dongguan) EXHIBIT No.: 2602T07213E-RF-INP Page 2 / 5 Bay Area Compliance Laboratories Corp. (Dongguan) EXHIBIT No.: 2602T07213E-RF-INP Page 3 / 5 5.8G Radar Antenna Bay Area Compliance Laboratories Corp. (Dongguan) EXHIBIT No.: 2602T07213E-RF-INP Page 4 / 5 Bay Area Compliance Laboratories Corp. (Dongguan) EXHIBIT No.: 2602T07213E-RF-INP Page 5 / 5 *****END *****

Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: 2602T07213E-RF-00A Report Template Version: FCC+IC-SRD5.8G/2.4G-V2.0 Page 43 of 44 EXHIBIT C - RF EXPOSURE EVALUATION Maximum Permissible Exposure (MPE) Applicable Standard According to subpart §1.1310 systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy level in excess of the Commission’s guidelines. Limits for Maximum Permissible Exposure (MPE) (§1.1310, §2.1091) (B) Limits for General Population/Uncontrolled Exposure Frequency Range (MHz) Electric Field Strength (V/m) Magnetic Field Strength (A/m) Power Density (mW/cm 2 ) Averaging Time (minutes) 0.3–1.34 614 1.63 *(100) 30 1.34–30 824/f 2.19/f *(180/f²) 30 30–300 27.5 0.073 0.2 30 300–1500 / / f/1500 30 1500–100,000 / / 1.0 30 f = frequency in MHz; * = Plane-wave equivalent power density; According to §1.1310 and §2.1091 RF exposure is calculated. Calculation formula: Prediction of power density at the distance of the applicable MPE limit S = PG/4R² = power density (in appropriate units, e.g. mW/cm 2 ); P = power input to the antenna (in appropriate units, e.g., mW); G = power gain of the antenna in the direction of interest relative to an isotropic radiator, the power gain factor, is normally numeric gain; R = distance to the center of radiation of the antenna (appropriate units, e.g., cm); Calculated Data: Operation Mode Frequency (MHz) Antenna Gain ▲ Conducted output power including Tune- up Tolerance ▲ Evaluation Distance (cm) Power Density (mW/cm 2 ) MPE Limit (mW/cm 2 ) (dBi) (numeric)(dBm)(mW) 5.8G Radar 5741-5869 3.0 2.00 -11.230.08 20.00 0.00003 1.0 For 5.8G Radar, Fundamental field strength is 86.97dBμV/m @ 3m =-8.23dBm(0.15mW) EIRP. Conducted power=-8.23-3dBm=-11.23dBm(0.08mW). EIRP(dBm)=Field Strength of Fundamental(dBμV/m)-95.2 (dB). Conducted power(dBm)= EIRP(dBm)-Antenna Gain(dBi). Note: The Antenna Gain and Conducted output power including Tune-up Tolerance provided by manufacturer. Result: Compliant. The devices meet FCC MPE at 20 cm distance

Report Template Version: FCC+IC-SRD5.8G/2.4G-V2.0 Page 1 of 44 TEST REPORT Applicant: Dawnrise Inc. Address: 6215 Regency Parkway NW Suite 910 Norcross, GA 30071 U.S.A. Product Name: Rechargeable Puck Lights with Charging Station FCC ID: 2BTHI-PKL100YS IC: 35808-PKL100YS HVIN: PKL100YS Standard(s): 47 CFR Part 15, Subpart C(15.249) RSS-210 Issue 11, June 25, 2024 RSS-Gen, Issue 5, February 2021 Amendment 2 ANSI C63.10-2020+Cor. 1-2023+C63.10a-2024 +Errata to C63.10a-2024 Report Number: 2602T07213E-RF-00A Report Date: 2026/7/7 The above device has been tested and found compliant with the requirement of the relevant standards by Bay Area Compliance Laboratories Corp. (Dongguan). Reviewed By: Alice Tan Approved By: Pedro Yun Title: RF Engineer Title: RF Supervisor Bay Area Compliance Laboratories Corp. (Dongguan) No.12, Pulong East 1 st Road, Tangxia Town, Dongguan, Guangdong, China Tel: +86-769-86858888 Fax: +86-769-86858891 www.baclcorp.com.cn Note: The information marked ▲ is provided by the applicant, the laboratory is not responsible for its authenticity and this information can affect the validity of the result in the test report. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This report cannot be reproduced except in full, without prior written approval of the Company. This report is valid only with a valid digital signature. The digital signature may be available only under the Adobe software above version 7.0. This report may contain data that are not covered by the accreditation scope and shall be marked with ★.This report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the U.S. Government. Each test item follows the test standard(s) without deviation. Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: 2602T07213E-RF-00A Report Template Version: FCC+IC-SRD5.8G/2.4G-V2.0 Page 2 of 44 CONTENTS DOCUMENT REVISION HISTORY ................................................................................................ 4 1. GENERAL INFORMATION .......................................................................................................... 5 1.1 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT) ............................................................. 5 1.2 ACCESSORY INFORMATION ...................................................................................................................... 5 1.3 ANTENNA INFORMATION DETAIL▲: ....................................................................................................... 5 1.4 EQUIPMENT MODIFICATIONS ................................................................................................................... 5 2. SUMMARY OF TEST RESULTS .................................................................................................. 6 3. DESCRIPTION OF TEST CONFIGURATION ........................................................................... 7 3.1 OPERATION FREQUENCY DETAIL ............................................................................................................ 7 3.2 EUT OPERATION CONDITION .................................................................................................................. 7 3.3 SUPPORT EQUIPMENT LIST AND DETAILS ............................................................................................... 7 3.4 SUPPORT CABLE LIST AND DETAILS ........................................................................................................ 7 3.5 BLOCK DIAGRAM OF TEST SETUP ............................................................................................................ 8 3.6 TEST FACILITY .......................................................................................................................................... 9 3.7 MEASUREMENT UNCERTAINTY ................................................................................................................ 9 4. REQUIREMENTS AND TEST RESULTS ................................................................................. 10 4.1 AC LINE CONDUCTED EMISSIONS ......................................................................................................... 10 4.1.1 Applicable Standard ........................................................................................................................................... 10 4.1.2 EUT Setup .......................................................................................................................................................... 12 4.1.3 EMI Test Receiver Setup ................................................................................................................................... 12 4.1.4 Test Procedure .................................................................................................................................................... 13 4.1.5 Corrected Amplitude & Margin Calculation ...................................................................................................... 13 4.1.6 Test Result .......................................................................................................................................................... 14 4.2 RADIATED EMISSIONS ............................................................................................................................. 17 4.2.1 Applicable Standard ........................................................................................................................................... 17 4.2.2 EUT Setup .......................................................................................................................................................... 18 4.2.3 EMI Test Receiver & Spectrum Analyzer Setup ................................................................................................ 20 4.2.4 Test Procedure .....................................…

Text truncated - open the document above for the full version.

Bay Area Compliance Laboratories Corp. (Dongguan) EXHIBIT No.: 2602T07213E-RF-00A-TSP Page 1 / 5 TEST SETUP PHOTOGRAPHS Conducted Emissions Front View Conducted Emissions Side View Bay Area Compliance Laboratories Corp. (Dongguan) EXHIBIT No.: 2602T07213E-RF-00A-TSP Page 2 / 5 Radiated Emission 9k-30MHz Parallel View Radiated Emission 9k-30MHz Perpendicular View Bay Area Compliance Laboratories Corp. (Dongguan) EXHIBIT No.: 2602T07213E-RF-00A-TSP Page 3 / 5 Radiated Emission 9k-30MHz Ground-parallel View Radiated Emission 30M-1GHz View Bay Area Compliance Laboratories Corp. (Dongguan) EXHIBIT No.: 2602T07213E-RF-00A-TSP Page 4 / 5 Radiated Emission 1-18GHz View Radiated Emission 18-26.5GHz View Bay Area Compliance Laboratories Corp. (Dongguan) EXHIBIT No.: 2602T07213E-RF-00A-TSP Page 5 / 5 Radiated Emission 26.5-40GHz View *****END *****