2BTJ6-NEXCIA-100The Nexcia Massage Device

THE NEXCIA LUXE I. Product Introduction This product is a high-performance portable body massager, featuring a durable aluminum alloy housing with a stylish appearance and comfortable grip. It comes with two types of handles:  Small Handle: Suitable for self-massage  Long Handle: Suitable for massaging others, providing stable and effortless grip The device is equipped with a powerful brushless motor, offering high torque and strong performance to effectively relieve muscle tension and fatigue. Use with the recommended essential oils for optimal relaxation and soothing effects. ⚠ Warning: Due to its high torque, this product is intended for adults only. Keep out of reach of children. II. Product Configuration  Main Unit ×1  Small Handle ×1  Long Handle ×1  Aluminum Alloy Massage Heads ×4 o Large Plate with Large Claw (Three-petal Design) ×1 o Large Plate with Small Claw (Three-petal Design) ×1 o Small Plate with Large Claw ×1 o Small Plate with Small Claw×1  Transparent Silicone Massage Head ×1 (for infrared mode)  Rechargeable Lithium Battery Pack ×2  Charger ×1  Type-C Charging Cable ×1  User Manual ×1 III. Massage Head Functions  Large Plate with Large Claw (Three-petal): Covers large areas, suitable for back, thighs, and major muscle groups; three-petal design conforms to body curves  Large Plate with Small Claw (Three-petal): Suitable for medium areas such as shoulders and waist, balancing coverage and fit  Small Plate with Large Claw: Focused massage for small to medium areas, e.g., calves and upper arms  Small Plate with Small Claw: Precise massage for fine areas like forearms and calves  Transparent Silicone Head: For infrared mode, suitable for deep tissue massage and relaxation IV. Instructions for Use 1. Power On & Standby  Press the power button once → Device enters standby mode, the surrounding LED ring lights up fully in orange 2. Mode Selection  Press the left button once → Mode 1, rotation speed 1, LED ring lights 1/3 in orange  Press again → Mode 2, rotation speed 2, LED ring lights 2/3 in orange  Press again → Mode 3, rotation speed 3 (automatic rotation), LED ring lights fully in orange 3. Emergency Stop  The emergency stop button is located at the top of both handles.  Press in case of unexpected situations or abnormal operation to immediately stop the device.  After using the emergency stop, ensure safety before restarting. 4. Infrared LED Function  The right-side button on the main unit controls the infrared LED  Short press → Turn on  Press again → Turn off  Note: Use infrared LED with the transparent silicone head only 5.Bluetooth Connection & App Usage This product supports Bluetooth connection and can be paired with the official mobile app “The Nexcia” for enhanced control and personalized massage experience. Connection Instructions: 1) Download the APP Scan the QR code on the package or manual to download “ The Nexcia”, or search “ The Nexcia” in the APP Store or Google Play. 2) Activate Bluetooth ● Ensure the device is powered on and in standby mode. ● Enable Bluetooth on your mobile phone. 3) Pair the Device ● Open The Nexcia app--tap “Connect Device”--select “The Nexcia” from the list. ● Wait for the connection confirmation. The App will display a “Connection Successful” massage once the device is successfully paired.. 4) App Features ● Adjust massage speed and mode remotely. ● Switch infrared mode ON/OFF. ● Monitor Battery level and remaining usage time. ● Save or customize preferred massage programs. 5) Disconnection To disconnect, simple turn off the device or disable Bluetooth on your phone. Notes: ● Only one device can be connected at a time. ● Keep the phone within 5 meters (16ft) of the device for stable connection. ● Bluetooth function is for control purposes only, the device can still operate manually without the app. 6. Power Off  Press and hold the left button for 2 seconds → Device turns off 7. Low Battery Warning  When battery is low, the device emits a "beep" sound  The red LED on the button and the four red LEDs on the main unit flash simultaneously to indicate charging is needed 8. Charging Indicator  Charging: Battery LED indicator lights red  Fully Charged: Battery LED indicator turns blue  Notes: - Use the original charger only to avoid overcharging or over-discharging - Do not charge in high temperature, humid, or enclosed spaces 9. Usage Suggestions  Apply an appropriate amount of essential oil to the target area before massage  Massage each area for no more than 20 minutes to avoid overuse  Use infrared mode only with the transparent silicone head  Ensure massage heads are securely installed before powering on V. Precautions 1. For adult use only. Keep out of reach of children 2. Waterproof rating IPX4 – do not immerse in water or expose to strong water jets. Do not use in showers, steam rooms, or saunas 3. Avoid use within 1 hour after meals 4. Ensure massage heads are securely installed before use 5. Limit each session to 20 minutes to prevent overheating 6. Stop immediately if discomfort occurs 7. Pregnant women, heart patients, or individuals with skin conditions or poor health should consult a doctor before use 8. Clean massage heads after use and keep them dry 9. Do not disassemble or modify the device VI. Cleaning & Maintenance 1. Remove massage heads after turning off, wipe with a clean damp cloth, and air dry. 2. Wipe the main unit with a dry cloth; do not immerse in water or use chemical solvents. 3. Clean massage heads promptly after use. 4. Do not store the device in direct sunlight, high humidity, or high temperatures. VII. Battery Pack Safety 1. If unused for long periods, remove battery packs and store in a cool, dry place. 2. Do not place battery terminals downward; store horizontally. 3. Stop using if battery is dropped or subjected to strong impact. 4. Avoid contact between battery terminals and metal surfaces to prevent short circuits. 5. For long-term storage, maintain 40%–60% cha…

Text truncated - open the document above for the full version.

Rev 1/26/2023 Ashley Black Inc. Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 12-16-2025 Ref: Attestation Statements Part 2.911(d)(5)(i) Filing FCC ID: 2BTJ6-NEXCIA-100 [Ashley Black Inc.] certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. [Ashley Black Inc.] certifies that the equipment for which authorization is sought does not include cybersecurity or anti-virus software produced or provided by Kaspersky Lab, Inc. or any of its successors and assignees, including equipment with integrated Kaspersky Lab, Inc. (or any of its successors and assignees) cybersecurity or anti-virus software pursuant to DA-24-886 and KDB 986446 D01 Covered Equipment Guidance section B(2a). Device is inherently compliant based on hardware limitations or software controls. or A Software Bill of Materials (SBOM) is provided to the TCB for review, and The end-user or third parties cannot install additional software on this device. Sincerely, (Applicant signature) (Applicant printed name) LUKE BLACK Rev 1/26/2023 Ashley Black Inc. Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 12-16-2025 Ref: Attestation Statements Part 2.911(d)(5)(ii) Filing FCC ID: 2BTJ6-NEXCIA-100 [Ashley Black Inc.] certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing “covered” equipment. Sincerely, (Applicant signature) (Applicant printed name) LUKE BLACK

Ashley Black Inc. U.S. Agent Letter of Attestation To: Federal Communications Commission 7435 Oakland Mills Road, Columbia, MD 21046, USA Date: December 16, 2025 Ref: Attestation Statement – Part 2.911(d)(7) filing FCC ID: 2BTJ6-NEXCIA-100 Ashley Black Inc. (“the applicant”) certifies that, as of the date of the filing of the application, Ashley Black Inc. (“the agent”) is our designated U.S. agent for service of process for the above reference FCC ID. The applicant accepts to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission- related administrative or judicial proceeding involving the equipment, whichever is later. The applicant further acknowledges it is our responsibility to inform the FCC whenever the agent information changes. Ashley Black Inc. ("the agent) understand it is the agent's obligation to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and email address. Designated U.S. Agent Company Name: Ashley Black Inc. FRN: 0037725835 Address: 3440 South Sam Houston Parkway E. Suite 100, Houston, Texas, United States, 77047 Signature: Contact Person: LUKE BLACK Tel: 832-581-6785 Email: [email protected] Applicant Company Name: Ashley Black Inc. FRN: 0037725835 Address: 3440 South Sam Houston Parkway E. Suite 100, Houston, Texas, United States, 77047 Signature: Contact Person: LUKE BLACK Tel: 832-581-6785 Email: [email protected]

Ashley Black Inc. Date: December 16, 2025 Product Model Number: NEXCIA-100, NEXCIA-100-BASICS, NEXCIA-100- EXPANSION FCC ID: 2BTJ6-NEXCIA-100 To whom it may concern, Re: Product Certification Representative Authorization Letter We authorize QAI Laboratories Ltd. 3980 North Fraser Way, Burnaby B.C. Canada V5J 5K5 to act on our behalf on all matters concerning the above named equipment. This shall include the following:  Testing  Approval applications and procedures We declare that QAI Laboratories Ltd. is allowed to forward all information related to the approval project to the applied certification body and to the notification entities and to discuss any issues concerning the approval application. Any and all acts carried out by QAI Laboratories Ltd. on our behalf shall have the same effect as acts of our own. By: LUKE BLACK Contact Listed on FCC Wesbite Title: Manager Email: [email protected] Telephone: 832-581-6785 On behalf of: Ashley Black Inc.

Ashley Black Inc. Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: December 16, 2025 Subject; Request for Confidentiality FCC ID: 2BTJ6-NEXCIA-100 To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description Tune-up Procedure Software Security Requirements for UNII devices It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: LUKE BLACK Title: Manager

Ashley Black Inc. Model Difference Statement DATE: December 16, 2025 FCC ID: 2BTJ6-NEXCIA-100 Dear Sir/Madam, Added models NEXCIA-100-BASICS, NEXCIA-100-EXPANSION basis of the original product NEXCIA-100. The color of appearance and model name of series models listed are different from the main model, but the circuit and the electronic construction are the same, declared by the manufacturer. Sincerely, Name: LUKE BLACK Title: Manager Company name: Shenzhen ZhiHuiJu Technology Co., Ltd Address: 3440 South Sam Houston Parkway E. Suite 100, Houston, Texas, United States, 77047

Page 1 of 3 1. General Inf ormation 1.1 Antenna Information Manufacturer: SHENZHEN TRENDZ TECHNOLOGY CO.,LTD. Address of Manufacturer: 4/F., Bldg.2, Hangcheng Industrial Zone, Hedong, Xixiang Town, Baoan Dist., Shenzhen, China Product Name: 2.4GHz Antenna Model Name: NEXCIA-100 Frequency Range: 2402MHz - 2480MHz Type of Antenna: PCB Antenna Antenna Gain: 0dBi (Max.) Impedance: 50 ohm Antenna View: Length * Width (20mm * 8.9mm) Page 2 of 3 2. Antenna Specification inf ormation 2.1 Gain Frequency Peak Gain (dBi) Polarity 2402MHz 0 Horizontal 2402MHz -0.54 Vertical 2441MHz -1.25 Horizontal 2441MHz -1.51 Vertical 2480MHz -1.68 Horizontal 2480MHz -1.27 Vertical Page 3 of 3 2.2 Radiation Pattern View

Report No: SSP25100146-1E FCC ID: 2BTJ6-NEXCIA-100 Annex of Test Report Annex A. EUT External Photos Model: NEXCIA-100 EUT View 1 EUT View 2 Report No: SSP25100146-1E FCC ID: 2BTJ6-NEXCIA-100 Annex of Test Report EUT View 3 EUT View 4 Report No: SSP25100146-1E FCC ID: 2BTJ6-NEXCIA-100 Annex of Test Report EUT View 5 EUT View 6 Report No: SSP25100146-1E FCC ID: 2BTJ6-NEXCIA-100 Annex of Test Report EUT View 7 EUT View 8

Report No: SSP25100146-1E FCC ID: 2BTJ6-NEXCIA-100 Annex of Test Report Annex D. Label and Inf ormation FCC Label Sample FCC Labe Size: 20mm * 5mm FCC Label Specifications Text is Black in color and is justified. Labels are printed in indelible ink on permanent adhesive backing or silk-screened onto the EUT or shall be affixed at a conspicuous location on the EUT. Where the EUT is constructed in two or more sections connected by wires and marketed together, the above statement is required to be affixed only to the main control unit. When the EUT is so small or for such use that it is not practicable to place the statement on it, the above information shall be placed in a prominent location in the instruction manual or pamphlet supplied to the user or, alternatively, shall be placed on the container in which the device is marketed. FCC Label Location Label Location

Report No: SSP25100146-1E FCC ID: 2BTJ6-NEXCIA-100 Annex of Test Report Annex B. EUT Internal Photos Model: NEXCIA-100 EUT Internal View 1 EUT Internal View 2 PCB ANT Report No: SSP25100146-1E FCC ID: 2BTJ6-NEXCIA-100 Annex of Test Report EUT Internal View 3 EUT Internal View 4 Report No: SSP25100146-1E FCC ID: 2BTJ6-NEXCIA-100 Annex of Test Report EUT Internal View 5 EUT Internal View 6 Report No: SSP25100146-1E FCC ID: 2BTJ6-NEXCIA-100 Annex of Test Report EUT Internal View 7 EUT Internal View 8 Report No: SSP25100146-1E FCC ID: 2BTJ6-NEXCIA-100 Annex of Test Report EUT Internal View 9 EUT Internal View 10 Report No: SSP25100146-1E FCC ID: 2BTJ6-NEXCIA-100 Annex of Test Report EUT Internal View 11

FCC ID: 2BTJ6-NEXCIA-100 RF Exposure Evaluation According to KDB 447498 D01 General RF Exposure Guidance v06 and part 2.1093，Unless specifically required by the published RF exposure KDB procedures, standalone 1-g head or body and 10-g extremity SAR evaluation for general population exposure conditions, by measurement or numerical simulation, is not required when the corresponding SAR Test Exclusion Threshold condition(s), listed below, is (are) satisfied. For 100 MHz to 6 GHz and test separation distances ≤ 50 mm, the 1-g and 10-g SAR test exclusion thresholds are determined by the following: [(max. power of channel, including tune-up tolerance, mW) / (min. test separation distance, mm)] · [√f(GHz)] ≤ 3.0 for 1-g SAR, and ≤ 7.5 for 10-g extremity SAR, where f(GHz) is the RF channel transmit frequency in GHz Power and distance are rounded to the nearest mW and mm before calculation The result is rounded to one decimal place for comparison Here, The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. For BLE Max Conducted Power(dBm) Tune-up Power(dBm) Max Tune-up Power(dBm) Max Power(mW) Frequency(MHz) Min. distance(mm) Calc. thresholds limit -2.27 -2(±1) -1 0.794 2480 5 0.250078 3.0 So a SAR test is not required

Report No: SSP25100146-1E FCC Test Report Page 1 of 31 FCC TEST REPORT FCC ID: 2BTJ6-NEXCIA-100 Report No. : SSP25100146-1E Applicant : Ashley Black Inc. Product Name : The Nexcia Massage Device Model Name : NEXCIA-100 Test Standard : FCC Part 15.247 Date of Issue : 2025-10-31 Shenzhen CCUT Quality Technology Co., Ltd. 1F, Building 35, Changxing Technology Industrial Park, Yutang Street, Guangming District, Shenzhen, Guangdong, China; (Tel.:+86-755-23406590 website: www.ccuttest.com) This test report is limited to the above client company and the product model only. It may not be duplicated without prior permitted by Shenzhen CCUT Quality Technology Co., Ltd. Report No: SSP25100146-1E FCC Test Report Page 2 of 31 Test Report Basic Information Applicant..................................: Ashley Black Inc. Address of Applicant...............: 3440 South Sam Houston Parkway E. Suite 100, Houston, Texas, United States, 77047 Manufacturer..........................: SHENZHEN TRENDZ TECHNOLOGY CO.,LTD. Address of Manufacturer........: 4/F., Bldg.2, Hangcheng Industrial Zone, Hedong, Xixiang Town, Baoan Dist., Shenzhen, China Product Name.........................: The Nexcia Massage Device Brand Name.............................: Ashley Black Main Model..............................: NEXCIA-100 Series Models..........................: NEXCIA-100-BASICS, NEXCIA-100-EXPANSION Test Standard..........................: FCC Part 15 Subpart C KDB 558074 D01 15.247 Meas Guidance v05r02 ANSI C63.4-2014 ANSI C63.10-2020 Date of Test .............................: 2025-10-20 to 2025-10-30 Test Result...............................: PASS Tested By ................................: (Walker Wu) Reviewed By............................: (Lorzix Luo) Authorized Signatory............: (Lahm Peng) Note : This test report is limited to the above client company and the product model only. It may not be duplicated without prior permitted by Shenzhen CCUT Quality Technology Co., Ltd.. All test data presented in this test report is only applicable to presented test sample. Report No: SSP25100146-1E FCC Test Report Page 3 of 31 CONTENTS 1. General Information ....................................................................................................................................................5 1.1 Product Information .............................................................................................................................................5 1.2 Test Setup Information..........................................................................................................................................6 1.3 Compliance Standards ...........................................................................................................................................7 1.4 Test Facilities ........................................................................................................................................................7 1.5 List of Measurement Instruments ..........................................................................................................................8 1.6 Measurement Uncertainty .....................................................................................................................................9 2. Summary of Test Results ........................................................................................................................................... 10 3. Antenna Requirement ............................................................................................................................................... 11 3.1 Standard and Limit.............................................................................................................................................. 11 3.2 Test Result .......................................................................................................................................................... 11 4. Conducted Emissions ................................................................................................................................................ 12 4.1 Standard and Limit.............................................................................................................................................. 12 4.2 Test Procedure.................................................................................................................................................... 12 4.3 Test Data and Results .......................................................................................................................................... 13 5. Radiated Emissions ................................................................................................................................................... 14 5.1 Standard and Limit.............................................................................................................................................. 14 5.2 Test Procedure.................................................................................................................................................... 14 5.3 Test Data and Results .......................................................................................................................................... 16 6. Band-edge Emissions(Radiated) ............................................................................................................................... 20 6.1 Standard and Limit.............................................................................................................................................. 20 6.2 Test Procedure.................................................................................................................................................... 20 6.3 Test Data and Results ...........................................................................................................................…

Text truncated - open the document above for the full version.

Report No: SSP25100146-1E FCC ID: 2BTJ6-NEXCIA-100 Annex of Test Report Annex C. Test Photos Radiated Emission Test View Below 1GHz Radiated Emission Test View Above 1GHz