2BTJ8ARGOSX1AiMOGA Argos

Moga Technology Co., Ltd. Attestation Statements Not Covered Entity Applicant To: Federal Communications Commission Date: 2026-02-05 7435 Oakland Mills Road, Columbia, MD 21046, USA Ref: Information Required by Section 2.911(d)(5)(ii) filing FCC ID: 2BTJ8ARGOSX1 [Moga Technology Co., Ltd.] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing “covered” equipment. Sincerely yours, Applicant Signature Printed Name: Huang Hongrui E-mail: [email protected]

Moga Technology Co., Ltd. Attestation Statements Not Covered Equipment To: Federal Communications Commission Date: 2026-02-05 7435 Oakland Mills Road, Columbia, MD 21046, USA Ref: Information Required by Section 2.911(d)(5)(i) filing FCC ID: 2BTJ8ARGOSX1 [Moga Technology Co., Ltd.] (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section § 2.903 of the FCC rules. Sincerely yours, Applicant Signature Printed Name: Huang Hongrui E-mail: [email protected]

TCB Authority to Act as Agent Number: MS-0045317 Revision:0 Effective date: Oct 8, 2021 Page 1 of 1 Moga Technology Co., Ltd. Authority to Act as Agent Date: ___2026/02/05______ TUV Rheinland of North America, Inc. 1279 Quarry Lane., Suite. A Pleasanton, CA 94566 To Whom It May Concern: I appoint TÜV Rheinland (Shenzhen) Co., Ltd. & Mr. Bell Hu to act as our agent in the preparation of this application for equipment certification. I certify that submitted documents properly describe the device or system for which equipment certification is sought. I also certify that each unit manufactured, imported or marketed, as defined in the FCC or Industry Canada’s regulations will have affixed to it a label identical to that submitted for approval with this application. For instances where our authorized agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by TUV Rheinland Group, still resides with Moga Technology Co., Ltd. 6-201 Room, business street, Huashan Road, Longshan district, Economic and Technological Development Area, Wuhu 241000 Anhui, P.R. China For TCB applications, We certify that we are not subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Further, no party, as defined in 47 CFR 1.2002 (b), to the application is subject to denial of federal benefits, that includes FCC benefits. Thank you, Agency Agreement Date:___2026/02/05 Agreement is valid for 12 months from the above date. By: Huang Hongrui (Signature)(Print name) On behalf of: _Moga Technology Co., Ltd. _ (Company Name)

Request for Confidentiality Letter MS-0044715Page 1 of 1Revision 0 Moga Technology Co., Ltd. Date: 2026-02-05___ Subject: Confidentiality Request for FCC ID: 2BTJ8ARGOSX1 Pursuant to FCC 47 CRF 0.457(d) and 0.459, the applicant requests that a part of the subject FCC application be held confidential. Type of Confidentiality RequestedExhibit Short Term PermanentBlock Diagrams Short Term PermanentInternal Photos *** Short Term PermanentOperation Description/Theory of Operation Short Term PermanentPart list Short Term PermanentSchematics Short Term PermanentUser’s Manual*** Short Term PermanentSoftware Security Information Short Termn/aTest Setup Short Termn/aExternal Photos Moga Technology Co., Ltd. has spent substantial effort in developing this product and it is one of the first of its kind in industry. Having the subject information easily available to "competition" would negate the advantage they have achieved by developing this product. Not protecting the details of the design will result in financial hardship. Permanent Confidentiality: The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. (*** PAG only) Short-Term Confidentiality: The applicant requests the exhibits selected above as short term confidential be withheld from public view for a period of __ 180__ days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. Applicant is also aware that they are responsible to notify TUV Rheinland in the event information regarding the product or the product is made available to the public. TUV Rheinland will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04-1705. Sincerely, Applicant Signature Printed Name: Huang Hongrui E-mail: [email protected]

Prüfbericht - Produkte Test Report - Products Prüfbericht-Nr.: Test report no.: CN26LMQK 004 Auftrags-Nr.: Order no.: 168584454 Seite 1 von 10 Page 1 of 10 Kunden-Referenz-Nr.: Client reference no.: N/A Auftragsdatum: Order date: 2025-11-17 Auftraggeber: Client: Moga Technology Co., Ltd. 6-201 Room, business street, Huashan Road, Longshan district, Economic and Technological Development Area, Wuhu 241000 Anhui, P.R. China Prüfgegenstand: Test item: AiMOGA Argos Bezeichnung / Typ-Nr.: Identification / Type no.: X1 Auftrags-Inhalt: Order content: Test Report Prüfgrundlage: Test specification: CFR Title 47 FCC Part 2: Section 2.1091 RSS-102 Issue 6 December 2023 Wareneingangsdatum: Date of sample receipt: 2025-12-16 Please refer to photo documents Prüfmuster-Nr.: Test sample no: A004155645-001~007 Prüfzeitraum: Testing period: 2026-01-20 - 2026-01-30 Ort der Prüfung: Place of testing: TÜV Rheinland (Shenzhen) Co., Ltd. Prüflaboratorium: Testing laboratory: TÜV Rheinland (Shenzhen) Co., Ltd. Prüfergebnis*: Test result*: Pass geprüft von: tested by: X Signed by: Bell Hu genehmigt von: authorized by: X Signed by: Jonathan Li Datum: Date: 2026-02-05 Ausstellungsdatum: Issue date: 2026-02-05 Stellung / Position: Sachverständige(r)/Expert Stellung / Position: Sachverständige(r)/Expert Sonstiges / Other: FCC ID: 2BTJ8ARGOSX1 IC: 34938-ARGOSX1 HVIN: X1 Zustand des Prüfgegenstandes bei Anlieferung: Condition of the test item at delivery: Prüfmuster vollständig und unbeschädigt Test item complete and undamaged * Legende: P(ass) = entspricht o.g. Prüfgrundlage(n) F(ail) = entspricht nicht o.g. Prüfgrundlage(n) N/A = nicht anwendbar N/T = nicht getestet * Legend: P(ass) = passed a.m. test specification(s) F(ail) = failed a.m. test specification(s) N/A = not applicable N/T = not tested Dieser Prüfbericht bezieht sich nur auf das o.g. Prüfmuster und darf ohne Genehmigung der Prüfstelle nicht auszugsweise vervielfältigt werden. Dieser Bericht berechtigt nicht zur Verwendung eines Prüfzeichens. This test report only relates to the above mentioned test sample. Without permission of the test center this test report is not permitted to be duplicated in extracts. This test report does not entitle to carry any test mark. TUV Rheinland (Shenzhen) Co., Ltd., 1601-1604, 1801-1804, Tower A Building 2, Shenzhen International Innovation Valley, Dashi 1st Road, Xili Street, Xili Community, Nanshan District, Shenzhen, 518000 Mail: [email protected] · Web: www.tuv.com V101023GCNSR Prüfbericht - Produkte Test Report - Products Prüfbericht-Nr.: CN26LMQK 004 Test report no.: Seite 2 von 10 Page 2 of 10 Anmerkungen Remarks 1 Alle eingesetzten Prüfmittel waren zum angegebenen Prüfzeitraum gemäß eines festgelegten Kalibrierungsprogramms unseres Prüfhauses kalibriert. Sie entsprechen den in den Prüfprogrammen hinterlegten Anforderungen. Die Rückverfolgbarkeit der eingesetzten Prüfmittel ist durch die Einhaltung der Regelungen unseres Managementsystems gegeben. Detaillierte Informationen bezüglich Prüfkonditionen, Prüfequipment und Messunsicherheiten sind im Prüflabor vorhanden und können auf Wunsch bereitgestellt werden. The equipment used during the specified testing period was calibrated according to our test laboratory calibration program. The equipment fulfils the requirements included in the relevant standards. The traceability of the test equipment used is ensured by compliance with the regulations of our management system. Detailed information regarding test conditions, equipment and measurement uncertainty is available in the test laboratory and could be provided on request. 2 Wie vertraglich vereinbart, wurde dieses Dokument nur digital unterzeichnet. Der TÜV Rheinland hat nicht überprüft, welche rechtlichen oder sonstigen diesbezüglichen Anforderungen für dieses Dokument gelten. Diese Überprüfung liegt in der Verantwortung des Benutzers dieses Dokuments. Auf Verlangen des Kunden kann der TÜV Rheinland die Gültigkeit der digitalen Signatur durch ein gesondertes Dokument bestätigen. Diese Anfrage ist an unseren Vertrieb zu richten. Eine Umweltgebühr für einen solchen zusätzlichen Service wird erhoben. Informationen zur Verifizierung der Authentizität unserer Dokumente erhalten Sie auf folgender Webseite: go.tuv.com/digital-signature As contractually agreed, this document has been signed digitally only. TUV Rheinland has not verified and unable to verify which legal or other pertaining requirements are applicable for this document. Such verification is within the responsibility of the user of this document. Upon request by its client, TUV Rheinland can confirm the validity of the digital signature by a separate document. Such request shall be addressed to our Sales department. An environmental fee for such additional service will be charged. For information on verifying the authenticity of our documents, please visit the following website: go.tuv.com/digital-signature 3 Prüfklausel mit der Note * wurden an qualifizierte Unterauftragnehmer vergeben und sind unter der jeweiligen Prüfklausel des Berichts beschrieben. Abweichungen von Prüfspezifikation(en) oder Kundenanforderungen sind in der jeweiligen Prüfklausel im Bericht aufgeführt. Test clauses with remark of * are subcontracted to qualified subcontractors and descripted under the respective test clause in the report. Deviations of testing specification(s) or customer requirements are listed in specific test clause in the report. 4 Die Entscheidungsregel für Konformitätserklärungen basierend auf numerischen Messergebnisen in diesem Prüfbericht basiert auf der "Null-Grenzwert-Regel" und der "Einfachen Akzeptanz" gemäß ILAC G8:2019 und IEC Guide 115:2023, es sei denn, in der auf Seite 1 dieses Berichts genannten angewandten Norm ist etwas anderes festgelegt oder vom Kunden gewünscht. Dies bedeutet, dass die Messunsicherheit nicht berücksichtigt wird und daher auch nicht im Prüfbericht angegeben wird. Zu weiteren Informationen bezueglich des Risikos durch diese Entschei…

Text truncated - open the document above for the full version.

www.jcantenna.com GlobalService Page: 1 / 5 Model:JC-870IF4015 LoraFPCAntenna LearnMore>> 2025.12.22 Features •AARCompliant •Lora868/920MHzCompatibility Applications •LoraDomain Antennadesignandmanufacture www.jcantenna.com Page: 2 / 5 1.Dimensions 2.Specifications ItemSpecifications Antenna Frequency 863-870/902-928MHz PolarizationLinear Gain MHz:6dBi; V.S.W.R ≤2.0 Impedance50Ω Mechanical CableRF1.13orothers ConnectorIPEXorothers MaterialFPC Environmental OperatingTemperature -40°C~+85°C RelativeHumidityUpto95% Vibration10to55Hzwith1.5mmamplitude2hours EnvironmentallyFriendlyROHSCompliant 863-870 902-928MHz: 5dBi Antennadesignandmanufacture www.jcantenna.com Page: 3 / 5 3.Parameters 3.1.VSWR 3.2.Radiation 3.2.1.Gain Antennadesignandmanufacture www.jcantenna.com Page: 4 / 5 3.2.2.Efficiency 3.2.3.RadiationPattern XZPLANE YZPLANE Antennadesignandmanufacture www.jcantenna.com Page: 5 / 5 CONTACTUS ZHEJIANGJCANTENNACO.,LTD. LearnMore>> E-mail:[email protected]@jcantenna.com Address:777#KangxingWestRoad,DayunTown,JiashanCounty,Jiaxing,Zhejiang,China XYPLANE

KunShan In no wave Communication Technology CO.,Ltd. Kunshan Ruixiang Xuntong Communication Technology Co., Ltd. Antenna Specification Document Project Name： CB1 RuiXiang Part Name： E099H4013D12000 Product Name： K H 4 0 - A N T 2 Antenna Assembly Customer Name: Moga Technology Co., Ltd. KunShan Innowave Communication Technology CO. ,Ltd. Revision History Date Version Description of changes Modified by Approved by 2024/10/10 V1.0 Creation Shao Dandan 2025/11/21 V2.0 Added 2D and 3D radiation patterns Guan Jiahao 1 2345 678 Versi on MarkChange contents Signat ure Date Assembly Drawing T01 Initial Release Wu Li 2024.10.08 四①★15.60±0.15 AA B Screen-Printed Characters B Characters Printed with White Matte Finish 符位置、大小、字体严格按照图 5 0 . 0 ± 3 1 . 1 Q ★ ① Terminal retention direction as shown: Retention face up 3 Backing Adhesive M099H4019D91000 3M 9448A T=0.15mm Coaxial Cable S099H4002D12000 1.13 mm black standard cable, domestic Type 4 connector, 165 mm length CC PCBM099H4036D11000 R-4 Single-sided PCB, 0.8 mm board thickness, black solder mask with white silkscreen characters, pads with 0SP (zero stencil printing) Nu mb er Name Part Number Description Cons umpt ion Technical Requirements: 1.Dimensions marked with "★" are critical dimensions; dimensions marked with "P" require CPK process capability analysis; dimensions in parentheses "( )" indicate fit-up (actual mating) dimensions; "Zone" indicates design change area. 2.Solder joints shall be smooth, free of burrs, voids, solder bridging, excess solder (icicles), or short circuits. 3.Drawing dimensions are intended for verification of外形 (form), function, and assembly compatibilit y. 4.Must satisfy reliability tests including salt spray test and adhesion test, etc., to be conducted in accordance with our internal reliability testing standard RX-WI-QAC-014. Tear notch Mo de l KH40 Design er Wu Li Date 2024.10.08 Tolerance Table Na me KH40-ANT2 Antenna Assenbly RF Peng Xin Date 2024.10.08 D All materials shall comply with our internal RX- WI-QAC-008 "Product Environmental Substance Prohibition Management Standard". Complies with environmental requirements of RoHS 2.0, REACH, and HF (Halogen Free); salt spray resistance: 24 hours (NSS test), in accordance with GB/T 10125 or equivalent standard. >200 ±0.20 ANGLES Pa rt Nu mb er F099H4013D12000 Audito e Wang Liang Date 2024.10.08 D KunS han Inno wave Comm unic atio n Tech nolo gy Co.t d. ② ★3 3.6 0 ±0 .15 Thickness without adhesive backing Stru ctur al Dra win g INwAVE 100-200 ±0.15 50-100 ±0.12 Ve rs io n T01 Drawin g Frame A4 10-50 ±0.10 Ra ti o FIT 5.Packaging shall be carried out according to Ruixiang Engineering’s packaging specifications. 6.This document is classified as commercial confidential. It is intended solely for authorized individuals or organizations. Any disclosure to third parties without prior written permission is strictly prohibited. 0-10 ±0.05 ±r Un it mm Third Angle Projection 一 KunShan Innowave Communication Technology CO. ,Ltd. 12345678 KunShan Innowave Communication Technology CO.,Ltd. Test Report S11 Test Chart： 1 Active Ch/Trace 2Response 3Stimulus 4 Mkr/Analysis 5InstrState ▶in s11 Log Mag 5.000dB/Ref 0.000dB 25.00 2. 4000000 GHz 2. 5000000 GHz -7.5237 dB 5.1500000 20.00 4—5.8500000 GH2-29:010 dB 15.00 10.00 5.000 0.000 ▶ -5.000 -10.00 -15.00 -20.00 -25.00 1 Start 500 MH₇ IFBW 70 kHz Stop 6 GHz G Passive Test Data： Frequency(Mhz) Efficiency(dB) Efficiency_Pcent(%) Gain(db) 2400-4.0039.79-1.01 2410-3.4944.78-0.48 2420-3.2147.79-0.11 2430-2.9450.860.18 2440-2.7153.620.39 2450-3.0150.010.13 2460-2.7253.520.47 2470-2.7952.570.34 2480-2.6554.270.36 2490-2.6254.650.34 2500-2.2459.740.87 5100-2.0462.572.17 KunShan Innowave Communication Technology CO.,Ltd. 5150-2.1161.451.25 5200-1.4671.461.45 5250-1.6867.941.37 5300-2.2459.731.25 5350-2.2659.491.22 5400-1.9164.461.59 5450-1.9064.541.51 5500-1.7167.391.67 5550-1.8964.641.45 5600-1.9563.831.70 5650-1.6967.691.65 5700-1.7167.431.77 5750-1.4371.892.29 5800-1.9963.231.93 5850-2.1660.771.38 KunShan In no wave Communication Technology CO.,Ltd. 2D Radiation Pattern (Gain units in the figure are all in dBi): Theta=90° Phi=0° 120 150 1.08 1804.2 330 210 240 Phi=90° KunShan Innowave Communication Technology CO.,Ltd. 3D Radiation Pattern： 2400MHz: Theta Azimuth:8 Elevation:0 Total Azimuth:0 Elevation: 0 2500MHz: Theta Azimuth:0 Elevation:0 Rol1:0 Zoom Scale Total Azimuth:0 Elevation:0 Roll:0 Zoom Scale Z y 2 -6 -15 -23 Phi Azimuth:8 Elevation:0 Rol1:0 Zoom Scale Z y -7 -16 -26 Phi Elevation:0 3 KunShan Innowave Communication Technology CO. ,Ltd. 5100MHz: Theta Azimuth:8 Elevation:0 Rol1:0 Zoom Scale Total Azimuth:0 Elevation:8 Roll:0 Zoom Scale 4 -5 -15 -24 Phi Azimuth:0 Elevation:0 Rol1:0 Zoom Scale -13 -28 -42 4 -11 -19 5800MHz: Theta Azimuth:0 Elevation:0 Rol1:0 Zoom Scale 3 -5 -14 -22 Phi Azimuth:0 Elevation:0 Rol1:0 Zoom Scale -3 -12 -21 -30 Total Azimuth:θ Elevation:0 Roll:0 Zoom Scale 4 -3 -9 -16 1 4

Kun Shan In no wave Communication Technology CO . , Ltd . Kunshan Ruixiang Xuntong Communication Technology Co., Ltd. Antenna Specification Document Project Name： CB1 RuiXiang Part Number： F099H4013D13000 Customer Part Number： Not Available Product Name： KH40 - ANT3 Antenna Assembly Customer Name ： Moga Technology Co., Ltd. Kun Shan In no wave Communication Technology CO ., Ltd. Revision History Date Version Description of Changes Modified by Approved by 2024/10/10 V1.0 Creation Shao Dandan 2025/11/21 V2.0 Added 2D and 3D radiation patterns Guan Jiahao 丝 12345678 VersionMarkChange ContentSignatureDat e Assembly Drawing T01 Initial Release Wu Li 2024.10 .08 ◎①★15.60±0.15 AA B B Printed characters: Matte white finish Position, size, and font must strictly follow the drawing ★95.00±2.50 1.13 - Domestic 4th generation terminal Terminal locking direction as shown: Locking surface facing opposite to the silkscreen side 2;1 Backing Adhesive M099H4019D91000 3M 9448A T=0.15mm Coaxial Cable S099H4002D13000 1.13mm pitch, black, standard FFC cable, domestic Gen4 connector, 95mm length C c PCB FFR-4 single-sided PCB, 0.8mm thickness, black solder mask with white silkscreen characters, OSP finish on pads.P Number Name Part Number Description Consumption 字 . . Tear notch Mode l KH40 design er Wu Li Date 2024.1 0.08 D All materials comply with our company’s internal standard: RX-WI-QAC-008 — Product Environmental Substance Prohibition Management Standard. Compliant with RoHS Directive 2011/65/EU (RoHS 2.0), REACH Regulation (EC) No. 1907/2006, and Halogen-Free (HF) requirements. Tolerance Table Name KH40-ANT3 Antenna Assembly R F Peng Xin Date 2024.1 0.08 D Kun Sha n In no wav e Com mun ica tio n Tec hno log y Co ., td . Str uct ura l Dra win g ★3 3.6 0 ±0 .15 Thickness without adhesive backing ◎① Technical Requirements: 1.Dimensions marked with “★” are critical dimensions; those marked with “P” require CPK capability analysis; dimensions in parentheses “( )” are assembled-fit dimensions; and “Zone” indicates a design change area. 2.Solder joints shall be smooth and free of burrs, cold solder joints (voids), solder bridging, or short circuits. 3.Dimensions shown on the drawing are used for verification of外形 (external geometry), functional performance, and assembly compatibility. 4.The part must pass relevant reliability tests, including salt spray test and adhesion test, in accordance with the company’s internal standard: RX-WI-QAC-014 — Reliability Test Procedure. wNowAV >200 ±0.20 ANGLES _ Part Nubmber F099H4013D13000 Audito r Wang Liang Date 2024.1 0.08 100-200 ±0.15 Vers ion T01 Draw ing Fram e A4 50-100 ±0.12 10-50 ±0.10 Rati o FIT Passed salt spray test for 24 hours (per RX-WI- QAC-014). 5.Packaging shall conform to the packaging specifications provided by Ruixiang Engineering. 6.This drawing is confidential and proprietary. It is intended solely for use by authorized individuals or organizations. Unauthorized disclosure, reproduction, or distribution to any third party is strictly prohibited. 0-10 ±0.05 ±r Unit mm Third Angle Projection ① Kun Shan In no wave Communication Technology CO ., Ltd. 2345678 Kun Shan In no wave Communication Technology CO ., Ltd. Test Report S11 Test Chart： 面 s11 Log Mag 5.000dB/Ref 0.000dB LF¹DMJ 25.00 20.00 2.4000000 . . - -0 .0 5.8500000 GHZ -15.446 dB 15.00 10.00 5.000 -5.000 -10.00 -15.00 -20.00 -25.00 1 Start 500 MHz IFBW 70 kHz Passive Test Data： Frequency(Mhz) Efficiency_ (dB) Efficiency_Pcent(%) Gain(db) 2400-4.6434.35-2.02 2410-4.1438.51-1.55 2420-3.7142.57-1.13 2430-3.3146.61-0.68 2440-3.0249.85-0.25 2450-3.4345.35-0.56 2460-3.3146.62-0.31 2470-3.4744.99-0.39 2480-3.3746.02-0.18 2490-3.4145.62-0.09 2500-3.1848.120.16 5100-3.2447.381.67 5150-2.7453.251.05 Kun Shan In no wave Communication Technology CO ., Ltd. 5200-1.9563.851.02 5250-2.3158.780.74 5300-2.7253.410.17 5350-2.3558.200.94 5400-1.7067.601.87 5450-1.8165.901.77 5500-1.7167.501.51 5550-1.5569.981.77 5600-1.5969.421.78 5650-1.6568.341.31 5700-1.7666.691.49 5750-1.8665.201.26 5800-2.0861.901.65 5850-1.9463.911.75 Kun Shan In no wave Communication Technology CO ., Ltd. 2D Radiation Pattern (Gain units in the figure are all in dBi): Theta=90° Phi=0° Phi=90° 270 -6.36 1.08 210 1804.2 KunShan Innowave Communication Technology CO., Ltd. 3D Radiation Pattern： 2400MHz: Z Theta Azimuth:0 Elevation:0 Rol1:0 Zoom Scale Z 2 -5 -12 -19 Phi Azimuth:0 Elevation:0 Rol1:0 Zoom Scale y 1 -9 -19 -29 Total Azimuth:8 Elevation:0 Roll:0 Zoom Scale 3 -3 -8 -14 2500MHz: Theta Azimuth:8 Elevation:0 Rol1:0 Zoom Scale Z y 2 -6 -15 -23 Phi Azimuth:0 Elevation:0 Rol1:0 Zoom Scale Z 3 -7 -16 -26 Z 4 Total Azimuth:8 Elevation:0 Rol1:0 Zoom Scale y -1 -7 -12 KunShan Innowave Communication Technology CO., Ltd. 5100MHz: Theta Azimuth:e Elevation:0 Rol1:0 Zoom Scale 4 -5 -15 -24 Phi Azimuth:0 Elevation:0 Rol1:0 Zoom Scale 1 -13 -28 -42 Total Azimuth:8 Elevation:0 Rol1:0 Zoom Scale 4 -4 -11 -19 5800MHz: Theta Azimuth:0 Elevation:0 Rol1:0 Zoom Scale 3 -5 -14 -22 Phi Azimuth:0 Elevation:8 Rol1:0 Zoom Scale -3 -12 -21 -30 Total Azimuth:8 Elevation:0 Roll:0 Zoom Scale y 4 -3 -9 -16

Prüfbericht - Produkte Test Report - Products Appendix A CN26LMQK 002 Page 1 of 76 Appendix A: Test Results of 5GHz Wi-Fi APPENDIX A: TEST RESULTS OF 5GHZ WI-FI ................................................................................................................... 1 APPENDIX A.1: TEST RESULTS OF 26DB BANDWIDTH ................................................................................................................. 2 Test Result..................................................................................................................................................................... 2 Test Graphs ................................................................................................................................................................... 3 APPENDIX A.2: TEST RESULTS OF 99% BANDWIDTH ................................................................................................................. 13 Test Result................................................................................................................................................................... 13 Test Graphs ................................................................................................................................................................. 14 APPENDIX A.3: TEST RESULTS OF CONDUCTED POWER SPECTRAL DENSITY ................................................................................... 24 Test Result................................................................................................................................................................... 24 Test Graphs ................................................................................................................................................................. 26 APPENDIX A.4: TEST RESULTS OF FREQUENCY STABILITY ........................................................................................................... 46 Test Result................................................................................................................................................................... 46 APPENDIX A.5: TEST RESULTS OF RADIATED SPURIOUS EMISSIONS ............................................................................................. 47 30MHz - 1GHz ............................................................................................................................................................. 47 1GHz - 18GHz .............................................................................................................................................................. 49 APPENDIX A.6: TEST RESULTS OF RADIATED EMISSIONS IN RESTRICTED BANDS ............................................................................. 61 Prüfbericht - Produkte Test Report - Products Appendix A CN26LMQK 002 Page 2 of 76 Appendix A.1: Test Results of 26dB Bandwidth Test Result TestMode Antenna Frequency [MHz] 26db EBW [MHz] FL[MHz] FH[MHz] Limit[MHz] Verdict 11A Ant1 5180 18.160 5170.880 5189.040 --- PASS 11A Ant1 5200 18.200 5190.880 5209.080 --- PASS 11A Ant1 5240 18.160 5230.920 5249.080 --- PASS 11N20MIMO Ant1 5180 19.280 5170.360 5189.640 --- PASS 11N20MIMO Ant1 5200 19.280 5190.360 5209.640 --- PASS 11N20MIMO Ant1 5240 19.360 5230.320 5249.680 --- PASS 11N40MIMO Ant1 5190 39.200 5170.640 5209.840 --- PASS 11N40MIMO Ant1 5230 39.040 5210.640 5249.680 --- PASS 11AC20MIMO Ant1 5180 19.200 5170.400 5189.600 --- PASS 11AC20MIMO Ant1 5200 19.360 5190.320 5209.680 --- PASS 11AC20MIMO Ant1 5240 19.440 5230.280 5249.720 --- PASS 11AC40MIMO Ant1 5190 38.880 5170.560 5209.440 --- PASS 11AC40MIMO Ant1 5230 38.960 5210.640 5249.600 --- PASS 11AC80MIMO Ant1 5210 86.400 5166.960 5253.360 --- PASS 11AX20MIMO Ant1 5180 20.360 5169.880 5190.240 --- PASS 11AX20MIMO Ant1 5200 20.160 5190.000 5210.160 --- PASS 11AX20MIMO Ant1 5240 20.360 5229.960 5250.320 --- PASS 11AX40MIMO Ant1 5190 39.760 5170.080 5209.840 --- PASS 11AX40MIMO Ant1 5230 39.360 5210.240 5249.600 --- PASS 11AX80MIMO Ant1 5210 80.640 5169.840 5250.480 --- PASS Prüfbericht - Produkte Test Report - Products Appendix A CN26LMQK 002 Page 3 of 76 Test Graphs 11A-Ant1-5180 11A-Ant1-5200 Prüfbericht - Produkte Test Report - Products Appendix A CN26LMQK 002 Page 4 of 76 11A-Ant1-5240 11N20MIMO-Ant1-5180 Prüfbericht - Produkte Test Report - Products Appendix A CN26LMQK 002 Page 5 of 76 11N20MIMO-Ant1-5200 11N20MIMO-Ant1-5240 Prüfbericht - Produkte Test Report - Products Appendix A CN26LMQK 002 Page 6 of 76 11N40MIMO-Ant1-5190 11N40MIMO-Ant1-5230 Prüfbericht - Produkte Test Report - Products Appendix A CN26LMQK 002 Page 7 of 76 11AC20MIMO-Ant1-5180 11AC20MIMO-Ant1-5200 Prüfbericht - Produkte Test Report - Products Appendix A CN26LMQK 002 Page 8 of 76 11AC20MIMO-Ant1-5240 11AC40MIMO-Ant1-5190 Prüfbericht - Produkte Test Report - Products Appendix A CN26LMQK 002 Page 9 of 76 11AC40MIMO-Ant1-5230 11AC80MIMO-Ant1-5210 Prüfbericht - Produkte Test Report - Products Appendix A CN26LMQK 002 Page 10 of 76 11AX20MIMO-Ant1-5180 11AX20MIMO-Ant1-5200 Prüfbericht - Produkte Test Report - Products Appendix A CN26LMQK 002 Page 11 of 76 11AX20MIMO-Ant1-5240 11AX40MIMO-Ant1-5190 Prüfbericht - Produkte Test Report - Products Appendix A CN26LMQK 002 Page 12 of 76 11AX40MIMO-Ant1-5230 11AX80MIMO-Ant1-5210 Prüfbericht - Produkte Test Report - Products Appendix A CN26LMQK 002 Page 13 of 76 Appendix A.2: Test Results of 99% Bandwidth Test Result TestMode Antenna Frequency [MHz] OCB [MHz] FL[MHz] FH[MHz] Limit[MHz] Verdict 11A Ant1 5180 16.487 5171.7842 5188.2712 --- PASS 11A Ant1 5200 16.507 5191.7900 5208.2970 --- PASS 11A Ant1 5240 16.529 5231.7773 5248.3063 --- PASS 11N20MIMO Ant1 5180 17.640 5171.1723 5188.8123 --- PASS 11N20MIMO Ant1 5200 17.662 5191.1568 5208.8188 --- PASS 11N20MIMO Ant1 5240 17.687 5231.1481 5248.8351 --- PASS 11N40MIMO Ant1 5190 36.230 5171.8918 5208.1218 --- PASS 11N40MIMO Ant1 5230 36.280 5211.9295 5248.2095 --- PASS 11AC2…

Text truncated - open the document above for the full version.

Prüfbericht - Produkte Test Report - Products Prüfbericht-Nr.: Test report no.: CN26LMQK 002 Auftrags-Nr.: Order no.: 168584454 Seite 1 von 20 Page 1 of 20 Kunden-Referenz-Nr.: Client reference no.: N/A Auftragsdatum: Order date: 2025-11-17 Auftraggeber: Client: Moga Technology Co., Ltd. 6-201 Room, business street, Huashan Road, Longshan district, Economic and Technological Development Area, Wuhu 241000 Anhui, P.R. China Prüfgegenstand: Test item: AiMOGA Argos Bezeichnung / Typ-Nr.: Identification / Type no.: X1 Auftrags-Inhalt: Order content: Test Report Prüfgrundlage: Test specification: CFR Title 47 FCC Part 15: Subpart E Section 15.407 RSS-247 Issue 4 July 2025 RSS-Gen Issue 5 February 2021 Wareneingangsdatum: Date of sample receipt: 2025-12-16 Please refer to photo documents Prüfmuster-Nr.: Test sample no: A004155645-001~007 Prüfzeitraum: Testing period: 2026-01-20 - 2026-01-30 Ort der Prüfung: Place of testing: TÜV Rheinland (Shenzhen) Co., Ltd. Prüflaboratorium: Testing laboratory: TÜV Rheinland (Shenzhen) Co., Ltd. Prüfergebnis*: Test result*: Pass geprüft von: tested by: X Signed by: Bell Hu genehmigt von: authorized by: X Signed by: Jonathan Li Datum: Date: 2026-02-05 Ausstellungsdatum: Issue date: 2026-02-05 Stellung / Position: Sachverständige(r)/Expert Stellung / Position: Sachverständige(r)/Expert Sonstiges / Other: FCC ID: 2BTJ8ARGOSX1 IC: 34938-ARGOSX1 HVIN: X1 This report is for 5GHz Wi-Fi. Zustand des Prüfgegenstandes bei Anlieferung: Condition of the test item at delivery: Prüfmuster vollständig und unbeschädigt Test item complete and undamaged * Legende: P(ass) = entspricht o.g. Prüfgrundlage(n) F(ail) = entspricht nicht o.g. Prüfgrundlage(n) N/A = nicht anwendbar N/T = nicht getestet * Legend: P(ass) = passed a.m. test specification(s) F(ail) = failed a.m. test specification(s) N/A = not applicable N/T = …

Text truncated - open the document above for the full version.