2BTKR-BTR-13Waterproof Bluetooth

Ningbo AVS Technology Co., Ltd. 2F, Building 7, No. 59 Chuangfu Road, Xiaogang Industrial Development Zone, Ningbo, Zhejiang Province, China Attestation Statements Not Covered Entity Applicant & Not Covered Equipment To: Federal Communications Commission Date: Jan. 14, 26 7435 Oakland Mills Road, Columbia, MD 21046, USA Ref: Information Required by Section 2.911(d)(5)(i) & (ii) FCC ID: 2BTKR-BTR-13 Ningbo AVS Technology Co., Ltd. (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List, established pursuant to § 1.50002 of reference chapter, as an entity producing “covered” communication equipment. The equipment for which authorization is sought is not “covered” telecommunications equipment and video surveillance equipment produced by entities identified on the Commission’s Covered List that prohibited from receiving an equipment authorization pursuant to section § 2.903 of the FCC rules. Sincerely yours, Applicant Signature Printed Name: Gu Wendong Title: Manager Address: 2F, Building 7, No. 59 Chuangfu Road, Xiaogang Industrial Development Zone, Ningbo, Zhejiang Province, China Tel.: 17771736801 Email: [email protected]

Ningbo AVS Technology Co., Ltd. 2F, Building 7, No. 59 Chuangfu Road, Xiaogang Industrial Development Zone, Ningbo, Zhejiang Province, China 1 | P a g e Attestation Statements To: Federal Communications Commission Date: Jan. 14, 26 7435 Oakland Mills Road, Columbia, MD 21046, USA Subject: Attestation of Compliance with FCC Covered List Software Requirements FCC ID: 2BTKR-BTR-13 Product Name: Waterproof Bluetooth This letter serves as an attestation that the equipment identified above ☐ is / ☒ is not (select one) "covered" software as defined under the Federal Communications Commission (FCC) Covered List requirements, as outlined in FCC 22-84 and KDB 986446. Specifically, the undersigned certifies that the equipment for which authorization is sought: 1. Does not contain cybersecurity or anti-virus software produced or provided by Kaspersky Lab, Inc. or any of its successors, assignees, parents, subsidiaries, affiliates, or any entity that has rebranded or relabeled software produced by the aforementioned entities. 2. Does not have the capability to store, run, or deliver any software identified on the FCC Covered List, including but not limited to cybersecurity and anti-virus software. To support this attestation, the appendix evaluation documentation has been prepared and is included in the certification filing. This attestation is based on a thorough evaluation of the device's design, functionality, and software environment. The undersigned affirms that the information provided is accurate and complete to the best of their knowledge. Sincerely yours, Applicant Signature Printed Name: Gu Wendong Title: Manager Address: 2F, Building 7, No. 59 Chuangfu Road, Xiaogang Industrial Development Zone, Ningbo, Zhejiang Province, China Tel.: 17771736801 Email: [email protected] Ningbo AVS Technology Co., Ltd. 2F, Building 7, No. 59 Chuangfu Road, Xiaogang Industrial Development Zone, Ningbo, Zhejiang Province, China 2 | P a g e Evaluation regarding to the Covered List Software: Compliance Methodology Evaluation Process Results Device is Inherent compliance ☒ The Chipset(s) used is limited to run the Cybersecurity or anti-virus software. Compliance ☒ The Memory used is limited to run the Cybersecurity or anti-virus software. Compliance ☒ There is storage capacity limitation for store or install the Cybersecurity or anti-virus software. Compliance ☒ Operating system used is limited to run, install or deliver the Cybersecurity or anti-virus software. Compliance Device is not Inherent compliance ☐ Evaluation Based on Software Bill of Materials (SBoM) See attached “SBoM“ Note:The SBoM content is limited to the scope of covered list software (e.g. antivirus and cybersecurity software). ☐ Evaluation Based on Scan for Software on the device ☐ Evaluation Based on Filesystem scan ☐ Evaluation Based on Running software check

Ningbo AVS Technology Co., Ltd. 2F, Building 7, No. 59 Chuangfu Road, Xiaogang Industrial Development Zone, Ningbo, Zhejiang Province, China January 14, 2026 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Confidentiality Request for: FCC ID: 2BTKR-BTR-13 Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, we hereby request permanent confidential treatment of the exhibits accompanying this certification application as outlined below : ⎯ Block Diagram ⎯ Schematics ⎯ Operational Description The above exhibits contain trade secrets and/or proprietary information that are not publicly available and materials that the Applicant has spent considerable efforts in developing. Public disclosure of these may be harmful to the Applicant and give an unfair advantage to competitors on the market. Pursuant to DA 04-1705, the applicant also requests temporary confidential treatment of the exhibits outlined below for a period of 45 days from the date of equipment authorization and prior to marketing in the United States to prevent the premature release of any sensitive information. Applicant is aware of their responsibility to notify DERYCOM in the event information regarding the product or the product is made available to the public before the requested period has expired. ⎯ User Manual ⎯ Internal Photos Sincerely, Title: Manager Address: 2F, Building 7, No. 59 Chuangfu Road, Xiaogang Industrial Development Zone, Ningbo, Zhejiang Province, China Tel.: 17771736801 Email: [email protected]

Ningbo AVS Technology Co., Ltd. 2F, Building 7, No. 59 Chuangfu Road, Xiaogang Industrial Development Zone, Ningbo, Zhejiang Province, China January 14, 2026 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Agent Authorization for FCC ID: 2BTKR-BTR-13 I, the undersigned, hereby authorize Shenzhen Tongzhou Testing Co.,Ltd. to act on our behalf in all matters relating to this application for equipment certification. Any act carried out by Shenzhen Tongzhou Testing Co.,Ltd. shall have the same effect as our own and I acknowledge that all responsibility for complying with the terms and conditions of certification, as specified by DERYCOM CERTIFICATION SERVICES, INC., still resides with Ningbo AVS Technology Co., Ltd.. We certify that we are not subject to a denial of federal benefits that includes FCC benefits pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. §862, and that no party to the application, as defined in 47 CFR §1.2002(b), is subject to a denial of federal benefits that includes FCC benefits pursuant to that section. Sincerely, Gu Wendong Manager Tel: 17771736801 Fax: N/A Email: [email protected]

Report No.: TZ0028251115PH02 Page 1 of 4 Exterior Photographs of EUT Figure 1 Figure 2 Report No.: TZ0028251115PH02 Page 2 of 4 Figure 3 Figure 4 Report No.: TZ0028251115PH02 Page 3 of 4 Figure 5 Figure 6 Report No.: TZ0028251115PH02 Page 4 of 4 Figure 7

Label Location FCC ID: 2BTKR-BTR-13

Shenzhen Tongzhou Testing Co.,Ltd FCC ID: 2BTKR-BTR-13 This report shall not be reproduced except in full, without the written approval of Shenzhen Tongzhou Testing Co.,Ltd Page 1 of 2 RADIO FREQUENCY EXPOSURE Limit According to section B.4 of 447498 D04 Interim General RF Exposure Guidance v01 SAR-based thresholds are derived based on frequency, power, and separation distance of the RF source. The formula defines the thresholds in general for either available maximum time-averaged power or maximum time-averaged ERP, whichever is greater. If the ERP of a device is not easily determined, such as for a portable device with a small form factor, the applicant may use the available maximum time-averaged power exclusively if the device antenna or radiating structure does not exceed an electrical length of λ/4. As for devices with antennas of length greater than λ/4 where the gain is not well defined, but always less than that of a half-wave dipole (length λ/2), the available maximum time-averaged power generated by the device may be used in place of the maximum time-averaged ERP, where that value is not known. The separation distance is the smallest distance from any part of the antenna or radiating structure for all persons, during operation at the applicable ERP. In the case of mobile or portable devices, the separation distance is from the outer housing of the device where it is closest to the antenna. The SAR-based exemption formula of § 1.1307(b)(3)(i)(B), repeated here as Formula (B.2), applies for single fixed, mobile, and portable RF sources with available maximum time-averaged power or effective radiated power (ERP), whichever is greater, of less than or equal to the threshold Pth (mW). This method shall only be used at separation distances from 0.5 cm to 40 cm and at frequencies from 0.3 GHz to 6 GHz (inclusive). Pth is given by Formula (B.2). Where and f is in GHz, d is the separation distance (cm), and ERP 20cm is per Formula (B.1). Shenzhen Tongzhou Testing Co.,Ltd FCC ID: 2BTKR-BTR-13 This report shall not be reproduced except in full, without the written approval of Shenzhen Tongzhou Testing Co.,Ltd Page 2 of 2 Results RF Exposure at Separation distance (cm): 0.5 Mode Antenna Frequency [MHz] Conducted Power [dBm] Manufacturing tolerance Antenna Gain [dBi] Max of ERP and Conducted Power including Tune Up SAR-based exemption threshold Pth [mW] Target Power [dBm] Tolerance ±[dB] [dBm] [mW] BLE_1M Ant1 2402 -0.49 -1 1 0 0 1.00 2.79 BLE_1M Ant1 2440 -2.41 -3 1 0 -2 0.63 2.75 BLE_1M Ant1 2480 -3.13 -3.5 1 0 -2.5 0.56 2.72 BLE_2M Ant1 2402 -0.41 -1 1 0 0 1.00 2.79 BLE_2M Ant1 2440 -2.44 -3 1 0 -2 0.63 2.75 BLE_2M Ant1 2480 -3.19 -3.5 1 0 -2.5 0.56 2.72 Max of ERP and Conducted Power including Tune Up (dBm) = Max Conducted Tune Up Power(dBm) and Max Conducted Tune Up Power(dBm) + Antenna Gain(dBi)-2.15), whichever is greater. The Maximum Erp is used for Routine Evaluation Exemption according to B.4 of 447498 D04 Interim General RF Exposure Guidance v01. So, the SAR evaluation is not required.

Report No.: TZ0028251115FRF02 Page 1 of 29 This publication may be reproduced in whole or in part for non-commercial purposes as long as the Shenzhen Tongzhou Testing Co.,Ltd. is acknowledged as copyright owner and source of the material. Shenzhen Tongzhou Testing Co.,Ltd. takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. The test report apply only to the specific sample(s) tested under stated test conditions. It is not permitted to copy extracts of these test result without the written permission of the test laboratory. TEST REPORT Report Number : TZ0028251115FRF02 Product Name : Waterproof Bluetooth Model/Type reference : BTR-13 FCC ID : 2BTKR-BTR-13 Prepared for : Ningbo AVS Technology Co., Ltd. 2F, Building 7, No. 59 Chuangfu Road, Xiaogang Industrial Development Zone, Ningbo, Zhejiang Province, China Prepared By : Shenzhen Tongzhou Testing Co.,Ltd. 1st Floor, Building 1, Haomai High-tech Park, Huating Road 387, Dalang Street, Longhua, Shenzhen, China Standards : FCC CFR Title 47 Part 15C, ANSI C63.10-2020 Date of Test : 2025-11-27 ~ 2025-12-08 Date of Issue : 2025-12-09 Prepared by : Nancy Li Reviewed by : Allen Lai Approved by : Max Zhang (Authorized Officer) Report No.: TZ0028251115FRF02 Page 2 of 29 ** Report Revise Record ** Report Version Revise Time Issued Date Valid Version Notes V1.0 / 2025-12-09 Valid Initial release Report No.: TZ0028251115FRF02 Page 3 of 29 TABLE OF CONTENTS 1. G E N E R A L I N F O R M A T I O N ........................................................ 4 1.1. Client Information ................................................................................................................... 4 1.2. Description of Device (EUT) ................................................................................................... 4 1.3. Wireless Function Tested in this Report .............................................................................. 4 1.4. EUT configuration ................................................................................................................... 5 1.5. Description of Test Facility .................................................................................................... 5 1.6. Statement of the Measurement Uncertainty ......................................................................... 6 1.7. Measurement Uncertainty ...................................................................................................... 6 1.8. Description of Test Modes ..................................................................................................... 6 1.9. Frequency of Channels .......................................................................................................... 6 2. T E S T M E T H O D O L O G Y ............................................................ 7 2.1. EUT Configuration .................................................................................................................. 7 2.2. EUT Exercise ........................................................................................................................... 7 2.3. Test Sample ............................................................................................................................. 7 3. S Y S T E M T E S T C O N F I G U R A T I O N .............................................. 8 3.1. Justification ............................................................................................................................. 8 3.2. EUT Exercise Software ........................................................................................................... 8 3.3. Special Accessories ............................................................................................................... 8 3.4. Block Diagram/Schematics .................................................................................................... 8 3.5. Equipment Modifications ....................................................................................................... 8 3.6. Test Setup ................................................................................................................................ 8 4. S U M M A R Y O F T E S T R E S U L T S ................................................. 9 5. T E S T R E S U L T ..................................................................... 10 5.1. On Time and Duty Cycle ....................................................................................................... 10 5.2. Maximum Peak Conducted Output Power Measurement ................................................. 11 5.3. Power Spectral Density Measurement ................................................................................ 12 5.4. 6 dB Spectrum Bandwidth and Occupied Channel Bandwidth Measurement ............... 13 5.5. Radiated Emissions Measurement ...................................................................................... 14 5.6. Conducted Spurious Emissions and Band Edges Test .................................................... 22 5.7. AC Power line conducted emissions .................................................................................. 23 5.8. Band-edge measurements for radiated emissions ........................................................... 24 5.9. Antenna Requirements ......................................................................................................... 27 6. L I S T O F M E A S U R I N G E Q U I P M E N T .......................................... 28 7. T E S T S E T U P P H O T O G R A P H S O F E U T ...................................... 29 8. E X T E R I O R P H O T O G R A P H S O F E U T ......................................... 29 9. I N T E R I O R P H O T O G R A P H S O F E U T .......................................... 29 Report No.: TZ0028251115FRF02 Page 4 of 29 1. G E N E…

Text truncated - open the document above for the full version.

Inverted F Antenna Specification Summary ITEMANT SPEC Model Name 2.4G ANT HorizontalVertical 2400MHz 2400MHz2500MHz2400MHz2400MHz 2500MHz Center Frequency -1.26-0.76 -0.0-5.25-2.46-1.86 MAX. Gain -0.0dBi PolarizationHorizontal and Vertical Azimuth Beam Pattern Omni-directional Impedance50 Ohm Antenna Length 38.20mm Manufacture ZHUHAI JIELI TECHNOLOGY CO.,LTD Antenna Photo & Length (mm) Horizontal: 2400 MHz 2450 MHz 2500 MHz Power (dBm) Max: 0 Min: -40 Scale: 5/div Gain (dB) Frequency (MHz) MaxMinAvg 2400-1.26174-30.0801-7.18716 2450-0.765802-36.5604-7.48023 2500 -0.000002 -22.0315-6.59127 Vertical: 2400 MHz 2450 MHz 2500 MHz Power (dBm) Max: 0 Min: -30 Scale: 5/div Gain(dB) Frequency (MHz) Max Min Avg 2400 -5.2537 -22.1424 -12.4294 2450 -2.4652 -24.5837 -10.4702 2500 -1.86120 -29.5214 -9.20432 ANT Test Labs：Attestation of Global Compliance Co., Ltd.

Appendix Test Data of the Report No.: TZ0028251115FRF02 Page 1 of 33 Appendix Test Data for BLE (Conducted Measurement) Product Name: Waterproof Bluetooth Trade Mark: / Test Model: BTR-13 FCC ID: 2BTKR-BTR-13 Environmental Conditions Temperature: 23.5°C Relative Humidity: 58% ATM Pressure: 100.0 kPa Test Engineer: Allen Lai Supervised by: Max Zhang NOTE N/A Appendix A: DTS Bandwidth Test Result Test Mode Antenna Frequency [MHz] DTS BW [MHz] FL [MHz] FH [MHz] Limit [MHz] Verdict BLE_1M Ant1 2402 0.740 2401.624 2402.364 0.5 PASS BLE_1M Ant1 2440 0.672 2439.668 2440.340 0.5 PASS BLE_1M Ant1 2480 0.688 2479.656 2480.344 0.5 PASS BLE_2M Ant1 2402 1.132 2401.424 2402.556 0.5 PASS BLE_2M Ant1 2440 1.408 2439.292 2440.700 0.5 PASS BLE_2M Ant1 2480 1.168 2479.412 2480.580 0.5 PASS Note: offset(dB) = cable loss(dB) + attenuator factor(dB) Appendix Test Data of the Report No.: TZ0028251115FRF02 Page 2 of 33 Test Graphs BLE_1M-Ant1-2402-PASS BLE_1M-Ant1-2440-PASS Appendix Test Data of the Report No.: TZ0028251115FRF02 Page 3 of 33 BLE_1M-Ant1-2480-PASS BLE_2M-Ant1-2402-PASS Appendix Test Data of the Report No.: TZ0028251115FRF02 Page 4 of 33 BLE_2M-Ant1-2440-PASS BLE_2M-Ant1-2480-PASS Appendix Test Data of the Report No.: TZ0028251115FRF02 Page 5 of 33 Appendix B: Occupied Channel Bandwidth Test Result Test Mode Antenna Frequency [MHz] OCB [MHz] FL [MHz] FH [MHz] Limit [MHz] Verdict BLE_1M Ant1 2402 1.0516 2401.4834 2402.5350 --- --- BLE_1M Ant1 2440 1.0391 2439.4848 2440.5239 --- --- BLE_1M Ant1 2480 1.0464 2479.4873 2480.5337 --- --- BLE_2M Ant1 2402 2.0763 2400.9782 2403.0545 --- --- BLE_2M Ant1 2440 2.0769 2438.9802 2441.0571 --- --- BLE_2M Ant1 2480 2.0725 2478.9835 2481.0560 --- --- Note: offset(dB) = cable loss(dB) + attenuator factor(dB) Appendix Test Data of the Report No.: TZ0028251115FRF02 Page 6 of 33 Test Graphs BLE_1M-Ant1-2402 BLE_1M-Ant1-2440 Appendix Test Data of the Report No.: TZ0028251115FRF02 Page 7 of 33 BLE_1M-Ant1-2480 BLE_2M-Ant1-2402 Appendix Test Data of the Report No.: TZ0028251115FRF02 Page 8 of 33 BLE_2M-Ant1-2440 BLE_2M-Ant1-2480 Appendix Test Data of the Report No.: TZ0028251115FRF02 Page 9 of 33 Appendix C: Maximum peak conducted output power Test Result Peak Test Mode Antenna Frequency [MHz] Conducted Peak Power [dBm] Conducted Limit [dBm] Verdict BLE_1M Ant1 2402 -0.49 ≤30 PASS BLE_1M Ant1 2440 -2.41 ≤30 PASS BLE_1M Ant1 2480 -3.13 ≤30 PASS BLE_2M Ant1 2402 -0.41 ≤30 PASS BLE_2M Ant1 2440 -2.44 ≤30 PASS BLE_2M Ant1 2480 -3.19 ≤30 PASS Note: offset(dB) = cable loss(dB) + attenuator factor(dB) Appendix Test Data of the Report No.: TZ0028251115FRF02 Page 10 of 33 Test Graphs Peak BLE_1M-Ant1-2402-PASS BLE_1M-Ant1-2440-PASS Appendix Test Data of the Report No.: TZ0028251115FRF02 Page 11 of 33 BLE_1M-Ant1-2480-PASS BLE_2M-Ant1-2402-PASS Appendix Test Data of the Report No.: TZ0028251115FRF02 Page 12 of 33 BLE_2M-Ant1-2440-PASS BLE_2M-Ant1-2480-PASS Appendix Test Data of the Report No.: TZ0028251115FRF02 Page 13 of 33 Appendix D: Maximum peak power spectral density Test Result Test Mode Antenna Frequency [MHz] Result [dBm/3kHz] Limit [dBm/3kHz] Verdict BLE_1M Ant1 2402 -15.84 ≤8.00 PASS BLE_1M Ant1 2440 -17.94 ≤8.00 PASS BLE_1M Ant1 2480 -18.62 ≤8.00 PASS BLE_2M Ant1 2402 -18.36 ≤8.00 PASS BLE_2M Ant1 2440 -20.51 ≤8.00 PASS BLE_2M Ant1 2480 -21.22 ≤8.00 PASS Note: offset(dB) = cable loss(dB) + attenuator factor(dB) Appendix Test Data of the Report No.: TZ0028251115FRF02 Page 14 of 33 Test Graphs BLE_1M-Ant1-2402-PASS BLE_1M-Ant1-2440-PASS Appendix Test Data of the Report No.: TZ0028251115FRF02 Page 15 of 33 BLE_1M-Ant1-2480-PASS BLE_2M-Ant1-2402-PASS Appendix Test Data of the Report No.: TZ0028251115FRF02 Page 16 of 33 BLE_2M-Ant1-2440-PASS BLE_2M-Ant1-2480-PASS Appendix Test Data of the Report No.: TZ0028251115FRF02 Page 17 of 33 Appendix E: Band edge measurements Test Result Test Mode Antenna Ch. Name Frequency [MHz] Ref. Level [dBm] Result [dBm] Limit [dBm] Verdict BLE_1M Ant1 Low 2402 -0.83 -49.58 ≤-20.83 PASS BLE_1M Ant1 High 2480 -3.79 -48.31 ≤-23.79 PASS BLE_2M Ant1 Low 2402 -3.62 -33.21 ≤-23.62 PASS BLE_2M Ant1 High 2480 -3.57 -49.28 ≤-23.57 PASS Note: offset(dB) = cable loss(dB) + attenuator factor(dB) Appendix Test Data of the Report No.: TZ0028251115FRF02 Page 18 of 33 Test Graphs BLE_1M-Ant1-2402-PASS BLE_1M-Ant1-2480-PASS Appendix Test Data of the Report No.: TZ0028251115FRF02 Page 19 of 33 BLE_2M-Ant1-2402-PASS BLE_2M-Ant1-2480-PASS Appendix Test Data of the Report No.: TZ0028251115FRF02 Page 20 of 33 Appendix F: Conducted Spurious Emission Test Result Test Mode Antenna Frequency [MHz] Freq. Range [MHz] Ref. Level [dBm] Result [dBm] Limit [dBm] Verdict BLE_1M Ant1 2402 0~Reference -0.40 -0.40 --- PASS BLE_1M Ant1 2402 30~1000 -0.40 -62.18 ≤-20.4 PASS BLE_1M Ant1 2402 1000~26500 -0.40 -36.76 ≤-20.4 PASS BLE_1M Ant1 2440 0~Reference -3.25 -3.25 --- PASS BLE_1M Ant1 2440 30~1000 -3.25 -72.35 ≤-23.25 PASS BLE_1M Ant1 2440 1000~26500 -3.25 -47.37 ≤-23.25 PASS BLE_1M Ant1 2480 0~Reference -3.74 -3.74 --- PASS BLE_1M Ant1 2480 30~1000 -3.74 -72.13 ≤-23.74 PASS BLE_1M Ant1 2480 1000~26500 -3.74 -48.04 ≤-23.74 PASS BLE_2M Ant1 2402 0~Reference -0.35 -0.35 --- PASS BLE_2M Ant1 2402 30~1000 -0.35 -62.12 ≤-20.35 PASS BLE_2M Ant1 2402 1000~26500 -0.35 -37.44 ≤-20.35 PASS BLE_2M Ant1 2440 0~Reference -3.65 -3.65 --- PASS BLE_2M Ant1 2440 30~1000 -3.65 -72.35 ≤-23.65 PASS BLE_2M Ant1 2440 1000~26500 -3.65 -47.82 ≤-23.65 PASS BLE_2M Ant1 2480 0~Reference -6.41 -6.41 --- PASS BLE_2M Ant1 2480 30~1000 -6.41 -72.66 ≤-26.41 PASS BLE_2M Ant1 2480 1000~26500 -6.41 -47.84 ≤-26.41 PASS Note: offset(dB) in Reference test plots = cable loss(dB) + attenuator factor(dB); For spurious emissions plots from 30MHz to 26.5GHz, the cable loss and attenuator factors have been set in the 'Input Correction' of the Spectrum Analyzer during the test. Appendix Test Data of the Report No.: TZ0028251115FRF02 Page 21 of 33 Test Graphs BLE_1M-Ant1-2402-0~Reference-PASS BLE_1M-Ant1-2402-30~1000-PASS A…

Text truncated - open the document above for the full version.

Report No.: TZ0028251115PH01 Page 1 of 1 Test Setup Photos of the EUT Radiated Emission Below 1GHz Radiated Emission Above 1GHz