2BTLH-ACCUMEMS1Handheld Thermal Imager

[email protected] GT Series Handheld Thermal Imager User Manual i © Hangzhou Accumems Technology Co. ， Ltd. All rights reserved. Manual Usage Guidelines This manual contains functional descriptions and product usage/management guidelines for various imager models. Due to functional differences among models within the same series, the manual may include explanations that are not applicable to your specific model. All pictures, charts, and other information provided herein are for descriptive and explanatory purposes only and are subject to change without notice due to firmware updates or other reasons. Please note that information regarding new features in the latest firmware may not be included in a timely manner. Use this manual under the guidance and assistance of professionals trained in supporting the product. E-mail Address For more information and technical support, please send an email to [email protected]. Trademarks Acknowledgement and other AccuMEMS’s trademarks and logos are the properties of Hangzhou Accumems Technology Co. ， Ltd. in various jurisdictions. Other trademarks and logos mentioned are the properties of their respective owners. ii CONTENTS 1. Safety Instruction .........................................................................................1 1.1 ESD WARNING .................................................................................................... 1 1.2 Power Supply .................................................................................................... 1 1.3 Battery ..................................................................................................................... 1 1.4 Using Environment ....................................................................................... 2 1.5 Transportation ................................................................................................. 3 1.6 Maintenance ...................................................................................................... 3 1.7 Emergency .......................................................................................................... 3 1.8 Laws and Regulations ...............................................................................4 2. Product Appearance.............................................................................. 5 3. Getting Started ............................................................................................ 8 3.1 Charging for the Imager .........................................................................8 3.2 Power On/Off the Imager ....................................................................8 4. Usage Scene Configuration .......................................................... 10 4.1 Choose a Usage Scene ........................................................................ 10 4.2 (Optional) Configure Usage Scene Parameters .............. 13 5. Temperature Measurement........................................................... 16 5.1 Measurement Tools Configuration ............................................... 16 iii 5.2 Temperature Accuracy Parameters Configuration ....... 17 5.3 Alarm Configuration ................................................................................ 18 5.4 Level & Span Configuration ............................................................. 19 6. Display Configuration ......................................................................... 21 6.1 UIRA-IR Configuration .............................................................................. 21 6.2 Image Mode Configuration ............................................................... 21 6.3 On-Screen Info Configuration ........................................................ 22 7. Pictures and Videos ............................................................................ 23 7.1 Capture Pictures ......................................................................................... 23 7.2 Record Videos .............................................................................................24 7.3 View Pictures and Videos .................................................................24 7.4 Export Pictures and Videos............................................................. 25 8. Device Connection ................................................................................ 26 8.1 Connect via Wi-Fi (If Applicable) ................................................ 26 8.2 Connect via Hotspot (If Applicable) ........................................ 26 9. Maintenance ................................................................................................. 27 9.1 Time and Date Configuration .......................................................... 27 9.2 View Imager Information .................................................................... 27 9.3 Format Memory .......................................................................................... 27 9.4 Logs Configuration.................................................................................. 27 iv 9.5 Upgrade ............................................................................................................ 27 9.6 Restore Imager Configuration .......................................................28 10. Guidance for Common Thermal Imaging Operations ........................................................................................................... 29 10.1 Can the UIRA-IR Algorithm Detect Water Leaks or Insulation Issues with 100% Accuracy? .......................................... 29 10.2 Factors may Interfere with the Detection Results of UIRA-Scene ............................................................................................................. 29 10.3 Improve Water Leak Detection Success Rates ........... 30 10.4 Higher-Quality Image ......................................................................... 30 10.5 Guidance on Using Thermal Im…

Text truncated - open the document above for the full version.

Hangzhou Accumems Technology Co.,Ltd. U.S. Agent Designation for Service of Process (Applicant and U.S. Agent are Separate Parties) TO: Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 ATT ENTION: FCC Certification – Section 2.911(d)(7) Information Designated U. S. Agent Company Name: United Consulting Technology Services Co., Ltd . FRN: 0033495714 Contact Name: Dav id Wu Street Address: 1 7800 CASTLETON ST STE 665 CITY OF INDUSTRY City/Province/Zip: CA 91748 Telephone No: (626) 217-4022 Email: [email protected] This letter is to confirm that we (“the Designated U.S . Agent) have accep ted the responsibility to act as the Designated U.S. Agent for Service of Process as required by section 47 CFR 2.911(d)(7) on behalf of th e Applicant noted below. U.S. Agent Signature: Date:2026-05-21 Signed by ( Printed Name/Title): David Wu/ CEO The Applicant acknowledges that they must maintain an agent for no less than one year after terminating all marketing and importation OR the conclusion ofany Commission-related proceeding involving the equipment. The applicant further acknowledges their responsibility to inform the FCC whenever the Designated U.S. Agent information above changes. Applicant Company name: Hangzhou Accumems Technology Co.,Ltd. Grantee Code: 2BTLH FRN: 0037731254 FCC ID: 2BTLH-ACCUMEMS1 Contact Name: xu xiaotao Street Address: Room 418-1, Building 2, JinxiuLinglongfu, Xixing Street, Binjiang District City/Province/Zip: Hangzhou, Zhejiang, China, 310051 Telephone No: 15362032896 Email: [email protected] Applicant Signature: Date: 2026-05-21 Signed by (Printed Name/Title): xu xiaotao, chairman

Applicant Declaration QSF27-14-04 Rev 1.4 April 25, 2025 Page 1 of 1 Original Issue: Jan. 4, 2021 SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Legal Business Name Hangzhou Accumems Technology Co.,Ltd. Address Room 418-1, Building 2, JinxiuLinglongfu, Xixing Street, Binjiang District, Hangzhou, Zhejiang, China, 310051 FRN 0037731254 Grantee Code 2BTLH FCC ID: 2BTLH-ACCUMEMS1 Authorized Contact Name xu xiaotao Contact Phone 15362032896 Contact Email [email protected] I, the undersigned, certify that I am an authorized signatory for the Applicant and therefore declare; a) in accordance with 47CFR2.911(d), all of the statements herein and the exhibits attached hereto are true and correct to the best of my knowledge and belief. b) in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made in this application, the Applicant is responsible for: (1) labeling the equipment with the exact FCC ID as specified in this application, (2) compliance statement labeling pursuant to the applicable rules, (3) compliance of the equipment with the applicable technical rules, c) if the Applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC’s technical requirements. d) in accordance with 47 CFR 2.909 and KDB394321, the Applicant has read, understood and agrees to accept that they are the responsible party and agree to abide by their responsibilities as specified under 47 CFR 2.909 and KDB394321. e) in accordance with ISO 17065, FCC KDB641163, FCC KDB610077, KDB394321 and RSP-100, the Applicant has read, understood, accepts and agrees to abide by the post market surveillance requirements. (1) the Applicant understands, accepts and agrees that a sample may be requested for surveillance testing. (2) the Applicant shall make provisions to always have a production sample available upon request by SGS, FCC and/or ISED. (3) the Applicant shall, upon request by SGS, at the Applicant’s expense, provide a production sample of the requested product to SGS, FCC and/or ISED as instructed. The sample shall include all support devices, cables, software, accessories or other hardware or software required for evaluation, review, certification and audit surveillance of products certified by SGS. f) neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. §862 because of a conviction for possession or distribution of a controlled substance. See 47CFR 1.2002(b) for the definition of a “party” for these purposes. g) the Applicant has read, understood, accepts and agrees to abide by the SGS North America, Inc. terms and conditions as specified in the TCB Application Form 731 (QSF27-14-01). Link to CFRs: https://www.fcc.gov/wireless/bureau-divisions/technologies-systems-and-innovation-division/rules-regulations-title-47 Link to KDBs: https://apps.fcc.gov/oetcf/kdb/index.cfm Link to RSP-100: https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01130.html Link to the Covered List: Covered List Applicant Signature: Date: 2026-05-21 Print Name: xu xiaotao Title: chairman *NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database

FCC COVERED LIST DECLARATION LETTER Page 1 of 1 Revision 1.0 SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Legal Business Name Hangzhou Accumems Technology Co.,Ltd. Address Room 418-1, Building 2, JinxiuLinglongfu, Xixing Street, Binjiang District, Hangzhou, Zhejiang, China, 310051 FRN 0037731254 Grantee Code 2BTLH FCC ID: 2BTLH-ACCUMEMS1 Authorized Contact Name xu xiaotao Contact Phone 15362032896 Contact Email [email protected] Hangzhou Accumems Technology Co.,Ltd. (“the applicant”) certifies: - the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. - as of the date of the filing of the application, the applicant [is not] identified on the Covered list, established pursuant to §1.50002, as an entity producing “covered” equipment. - the software to be loaded prior to marketing of the equipment identified above is not “covered” software manufactured by any entity including predecessors, successors, parents, subsidiaries, affiliates or any entity which has rebranded or relabeled the software produced by the entity(ies) identified on the “Covered List”. - the device is not capable of storing or running software listed on the covered list and therefore is inherently compliant. Link to the Covered List: Covered List Applicant Signature: Date: 2026-01-04 Print Name: xu xiaotao Title: chairman *NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database

< Hangzhou Accumems Technology Co.,Ltd. > Date: 2026-05-21 TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: 2BTLH-ACCUMEMS1 To whom it may concern: We, the undersigned, hereby authorize Parlam Zhan to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Where our agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, Inc., still resides with Hangzhou Accumems Technology Co.,Ltd. This authorization is valid until further written notice from the applicant. Name (Printed): xu xiaotao Title: chairman Signature: On behalf of Company: Hangzhou Accumems Technology Co.,Ltd. Telephone: 15362032896

Hangzhou Accumems Technology Co.,Ltd. To: SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia United States From: Hangzhou Accumems Technology Co.,Ltd. Room 418-1, Building 2, JinxiuLinglongfu, Xixing Street, Binjiang District, Hangzhou, Zhejiang, China, 310051 Regarding: Confidentiality Request regarding application for FCC ID: 2BTLH-ACCUMEMS1 LONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of the commission’s rules, the applicant hereby request confidential treatment of the documents listed below, associated with the certification application referenced above. Schematic(s) Block Diagrams Operational Descriptions The documents above contain proprietary information not released to the public. Public disclosure of this information may prove harmful to the business of the applicant. Sincerely, Signature: Printed Name (on file with the FCC associated with the Grantee Code): xu xiaotao Title: chairman Company Name: Hangzhou Accumems Technology Co.,Ltd.

Compliance Certification Services (Kunshan) Inc. Page: 1 of 4 External Photos for KSCR2601000229AT Test Model No.: GT27D Compliance Certification Services (Kunshan) Inc. Page: 2 of 4 EUT Constructional Details (EUT Photos) Compliance Certification Services (Kunshan) Inc. Page: 3 of 4 Compliance Certification Services (Kunshan) Inc. Page: 4 of 4 - End of the Appendix -

Page 1 of 1 Label Location

Compliance Certification Services (Kunshan) Inc. Page: 1 of 14 Internal Photos for KSCR2601000229AT Test Model No.: GT27D Compliance Certification Services (Kunshan) Inc. Page: 2 of 14 EUT Constructional Details (EUT Photos) Compliance Certification Services (Kunshan) Inc. Page: 3 of 14 Flash 1 Compliance Certification Services (Kunshan) Inc. Page: 4 of 14 Compliance Certification Services (Kunshan) Inc. Page: 5 of 14 Compliance Certification Services (Kunshan) Inc. Page: 6 of 14 Compliance Certification Services (Kunshan) Inc. Page: 7 of 14 Compliance Certification Services (Kunshan) Inc. Page: 8 of 14 Compliance Certification Services (Kunshan) Inc. Page: 9 of 14 Compliance Certification Services (Kunshan) Inc. Page: 10 of 14 Compliance Certification Services (Kunshan) Inc. Page: 11 of 14 Compliance Certification Services (Kunshan) Inc. Page: 12 of 14 Compliance Certification Services (Kunshan) Inc. Page: 13 of 14 Compliance Certification Services (Kunshan) Inc. Page: 14 of 14 Flash 2 - End of the Appendix -

Report No.: KSCR260100022902 Page: 1 of 7 CCSEM-TRF-001 Rev. 03 Dec 18, 2024 1 Cover Page RF Exposure Evaluation Report Application No.: KSCR2601000229AT FCC ID: 2BTLH-ACCUMEMS1 Applicant: Hangzhou Accumems Technology Co.,Ltd. Address of Applicant: Room 418-1, Building 2, JinxiuLinglongfu, Xixing Street, Binjiang District, Hangzhou City, Zhejiang Province Manufacturer: Hangzhou Accumems Technology Co.,Ltd. Address of Manufacturer: Room 418-1, Building 2, JinxiuLinglongfu, Xixing Street, Binjiang District, Hangzhou City, Zhejiang Province Equipment Under Test (EUT): EUT Name: Handheld Thermal Imager Model No.: GT27D Trade Mark: AccuMEMS Standard(s) : FCC Rules 47 CFR §2.1093 KDB 447498 D01 General RF Exposure Guidance v06 Date of Receipt: 2026-01-26 Date of Test: 2026-02-01 to 2026-03-09 Date of Issue: 2026-05-13 Test Result: Pass* * In the configuration tested, the EUT complied with the standards specified above. Report No.: KSCR260100022902 Page: 2 of 7 CCSEM-TRF-001 Rev. 03 Dec 18, 2024 Revision Record Version Description Date Remark 00 Original 2026-05-13 / Authorized for issue by: Tested By Tommie_Tang /Project Engineer Approved By Terry Hou /Reviewer Report No.: KSCR260100022902 Page: 3 of 7 CCSEM-TRF-001 Rev. 03 Dec 18, 2024 2 Contents Page 1 Cover Page ........................................................................................................................................ 1 2 Contents ............................................................................................................................................ 3 3 General Information .......................................................................................................................... 4 3.1 General Description of E.U.T. .................................................................................................... 4 3.2 Details of E.U.T. ......................................................................................................................... 4 3.3 Test Location .............................................................................................................................. 5 3.4 Test Facility ................................................................................................................................ 5 4 FCC Radiofrequency radiation exposure limits ............................................................................ 6 5 Measurement and Calculation ......................................................................................................... 7 5.1 Maximum transmit power ........................................................................................................... 7 5.2 RF Exposure Calculation ........................................................................................................... 7 Report No.: KSCR260100022902 Page: 4 of 7 CCSEM-TRF-001 Rev. 03 Dec 18, 2024 3 General Information 3.1 General Description of E.U.T. Power supply: DC 5V,2A by USB or DC 3.6V by rechargeable Li-ion battery Product Type: Portable device Mobile device Fixed device 3.2 Details of E.U.T. Operation Frequency: 802.11b/g/n(HT20): 2412MHz to 2462MHz; 802.11n(HT40): 2422MHz to 2452MHz Modulation Type: 802.11b: DSSS (DBPSK, DQPSK, CCK); 802.11g/n: OFDM (BPSK, QPSK, 16QAM, 64QAM) Number of Channels: 802.11b/g/n(HT20):11;802.11n(HT40):7 Channel Spacing: 5MHz Antenna Type: PCB Antenna Antenna Gain: 0.27dBi (Provided by the manufacturer) Flash: Flash 1 Brand: KIOXIA Manufacturer: KIOXIA Specification: THGBMTG5D1LBAIL Capacity: 4GB Flash 2 Brand: Macronix Manufacturer: Macronix International Co.,LTD(MXIC) Specification: MX52LM04A11XVW Capacity: 4GB Report No.: KSCR260100022902 Page: 5 of 7 CCSEM-TRF-001 Rev. 03 Dec 18, 2024 3.3 Test Location All tests were performed at: Compliance Certification Services (Kunshan) Inc. No.10 Weiye Rd, Innovation park, Eco&Tec, Development Zone, Kunshan City, Jiangsu, China. Tel: +86 512 5735 5888 Fax: +86 512 5737 0818 No tests were sub-contracted. Note: 1. SGS is not responsible for wrong test results due to incorrect information (e.g., max. internal working frequency, antenna gain, cable loss, etc) is provided by the applicant. (If applicable). 2. SGS is not responsible for the authenticity, integrity and the validity of the conclusion based on results of the data provided by applicant. (If applicable). 3. Sample source: sent by customer. 3.4 Test Facility The test facility is recognized, certified, or accredited by the following organizations: • A2LA Compliance Certification Services (Kunshan) Inc. is accredited by the American Association for Laboratory Accreditation (A2LA). Certificate No. 2541.01. • FCC Compliance Certification Services (Kunshan) Inc. has been recognized as an accredited testing laboratory. Designation Number: CN1172. • ISED Compliance Certification Services (Kunshan) Inc. has been recognized by Innovation, Science and Economic Development Canada (ISED) as an accredited testing laboratory. Company Number: 2324E • VCCI The 3m and 10m Semi-anechoic chamber and Shielded Room of Compliance Certification Services (Kunshan) Inc. has been registered in accordance with the Regulations for Voluntary Control Measures with Registration No.: R-20134, R-11600, C-11707, T-11499, G-10216 respectively. Report No.: KSCR260100022902 Page: 6 of 7 CCSEM-TRF-001 Rev. 03 Dec 18, 2024 4 FCC Radiofrequency radiation exposure limits The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤ 50 mm are determined by: [(max power of channel)/(min test separation distance)]*[√f(GHz)] ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10- g extremity SAR, where • f(GHz) is the RF channel transmit frequency in GHz • Power and distance are rounded to the nearest mW and mm • The result is rounded to one decimal place for comparison • 3.0 and 7.5 are referred to as the numeric thresholds The test exclusions are applicable only when the minimum test separation distance is ≤ 50 mm…

Text truncated - open the document above for the full version.

Antenna Specification V1.0 Shenzhen Sunyield Technology Co., Ltd. 2/F, Building 5, Hualian Industrial Zone, Xinshi Community, Dalang Street, Longhua District, Shenzhen, China 第 1 页 Table of Content 1. Antenna Characteristic Specification ............................................................................................................. 2 1.1 Antenna Structure .................................................................................................................................... 2 1.2 Antenna Technical Parameters and Interface .......................................................................................... 2 2. Antenna Test Conditions ................................................................................................................................ 3 2.1 Test Equipment ........................................................................................................................................ 3 2.2 Test Result ................................................................................................................................................ 3 Return Loss (S11) ........................................................................................................................................................ 3 Antenna Efficiency ...................................................................................................................................................... 4 Antenna 2D Radiation Pattern ................................................................................................................................... 4 Revision History .................................................................................................................................................. 5 第 2 页 1. Antenna Characteristic Specification This specification describes the physical characteristics and electrical performance of the following 2.4G Wi-Fi antennas. Figure 1.Antenna Actual Effect Picture 1.1 Antenna Structure The antenna is mainly composed of SMT on the PCB. 1.2 Antenna Technical Parameters and Interface Design Specifications Typical Units Form PCB onboard \ Frequency 2400-2500 MHz Gain 2.45GHz：0.11 dBi Antenna Efficiency @2.45GHz：33.34 % VSWR < 2 \ Polarization Linear Polarization \ Axial Ratio \ \ Radiation pattern Omnibearing \ impedance 50 ohm Power handling 33 dBm Interface \ \ Overall dimensions 15mm*5mm \ Weight \ \ Operation Temp. -30-70 °C Storing Temp. -30-70 °C 第 3 页 2. Antenna Test Conditions 2.1 Test Equipment Antenna Vector Network Analyzer ROHDE&SCHWARZ ZNB 20 Figure 2.Vector Network Analyzer 2.2 Test Result Return Loss (S11) Figure 3.Return Loss The yellow curve in the figure above shows that the antenna syntony is realized well, and the resistance condition matches well. 第 4 页 Antenna Efficiency Antenna 2D Radiation Pattern 2.4GHz/2.45GHz/2.5GHz Phi=0 deg Frequency (MHz) Gain(dBi) Efficienc y(%) 2400-0.0434.07 2410-0.134.3 2420-0.1434.42 24300.0135.02 24400.0534.43 24500.1133.34 24600.1832.67 24700.2732.61 24800.4433.47 24900.5334.03 25000.635.48 第 5 页 Phi=90 deg Theta=90 deg Revision History

Report No.: KSCR260100022901 Page: 1 of 121 CCSEM-TRF-001 Rev. 03 Dec 18, 2024 TEST REPORT Application No.: KSCR2601000229AT FCC ID: 2BTLH-ACCUMEMS1 Applicant: Hangzhou Accumems Technology Co.,Ltd. Address of Applicant: Room 418-1, Building 2, JinxiuLinglongfu, Xixing Street, Binjiang District, Hangzhou City, Zhejiang Province Manufacturer: Hangzhou Accumems Technology Co.,Ltd. Address of Manufacturer: Room 418-1, Building 2, JinxiuLinglongfu, Xixing Street, Binjiang District, Hangzhou City, Zhejiang Province Equipment Under Test (EUT): EUT Name: Handheld Thermal Imager Model No.: GT27D Trade Mark: AccuMEMS Standard(s) : 47 CFR Part 15, Subpart C 15.247 Date of Receipt: 2026-01-26 Date of Test: 2026-02-01 to 2026-03-09 Date of Issue: 2026-05-13 Test Result: Pass* * In the configuration tested, the EUT complied with the standards specified above. Report No.: KSCR260100022901 Page: 2 of 121 CCSEM-TRF-001 Rev. 03 Dec 18, 2024 Revision Record Version Description Date Remark 00 Original 2026-05-13 / Authorized for issue by: Tested By Tommie_Tang/Project Engineer Approved By Terry Hou /Reviewer Report No.: KSCR260100022901 Page: 3 of 121 CCSEM-TRF-001 Rev. 03 Dec 18, 2024 2 Test Summary Radio Spectrum Technical Requirement Item Standard Method Requirement Result Antenna Requirement 47 CFR Part 15, Subpart C 15.247 N/A 47 CFR Part 15, Subpart C 15.203 & 15.247(b)(4) Pass Radio Spectrum Matter Part Item Standard Method Requirement Result Conducted Emissions at AC Power Line (150kHz-30MHz) 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2020) Section 6.2 47 CFR Part 15, Subpart C 15.207 Pass Radiated Emissions which fall in the restricted bands ANSI C63.10 (2020) Section 6.10.5 & 11.12 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Radiated Spurious Emissions Below 1GHz ANSI C63.10 (2020) Section 6.4,6.5 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Radiated Spurious Emissions Above 1GHz ANSI C63.10 (2020) Section 6.6 & 11.12 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Maximum Conducted Output Power ANSI C63.10 (2020) Section 11.9.2 47 CFR Part 15, Subpart C 15.247(b)(3) Pass Minimum 6dB Bandwidth ANSI C63.10 (2020) Section 11.8.1 47 CFR Part 15, Subpart C 15.247a(2) Pass Power Spectral Density ANSI C63.10 (2020) Section 11.10.2 47 CFR Part 15, Subpart C 15.247(e) Pass Conducted Band Edges Measurement ANSI C63.10 (2020) Section 6.10.4 47 CFR Part 15, Subpart C 15.247(d) Pass Conducted Spurious Emissions ANSI C63.10 (2020) Section 11.11 47 CFR Part 15, Subpart C 15.247(d) Pass Note: The product has two kinds of flash and their RF characteristics are completely consistent. Only the product with Flash 1 was tested in this report. Report No.: KSCR260100022901 Page: 4 of 121 CCSEM-TRF-001 Rev. 03 Dec 18, 2024 3 Contents Page 1 COVER PAGE ........................................................................................................................................... 1 2 Test Summary ......................................................................................................................................... 3 3 Contents ................................................................................................................................................... 4 4 General Information ................................................................................................................................ 5 4.1 Details of E.U.T. ............................................................................................................................... 5 4.2 Power level setting using in test ....................................................................................................... 5 4.3 Description of Support Units ............................................................................................................ 5 4.4 Measurement Uncertainty ................................................................................................................ 6 4.5 Test Location .................................................................................................................................... 7 4.6 Test Facility ...................................................................................................................................... 7 4.7 Deviation from Standards .................................................................................…

Text truncated - open the document above for the full version.