2BTOH-H3006RToy RC Drone Stealth Spinner

STEALTH SPINNER 8+ Pairing 1. Place the drone on a level and solid surface to ensure a steady takeo. 2. Press the power button on the remote control to power on the remote control. The status light on the remote control will fade on and o slowly to indicate the remote control is in pairing mode and ready to pair with the drone. 3. Slide the power switch on the drone to the on position to power on the drone. The status light on the drone will fade on and o to indicate the drone is in pairing mode and ready to pair with the remote control. 4. Push the left stick forward and quickly backward to pair the remote control to the drone. Once successfully paired, the status lights on the remote control and drone will both remain solidly lit. 5. If the remote control and drone do not pair successfully within 60 seconds, both the remote control and drone will enter sleep mode. Power o and power on both the remote control and drone to retry the pairing process. 6. If the connection between the remote control and drone is interrupted, the remote control and drone will automatically enter pairing mode and attempt to pair again. The indicator lights on the remote control will begin to fade on and o and then will remain solidly lit when paired again. If the indicator light on the remote control does not begin to fade on and o, either the remote control or drone has not entered pairing mode, and they will not automatically pair again. Power o and power on both the remote control and drone to retry the pairing process. If the indicator light on the remote control does not power on, change the batteries in the remote control. If the indicator light on the drone does not power on, recharge the drone. 7. If there is no input on the remote control for 5 minutes, the remote control and drone will enter sleep mode. To wake from sleep mode, press the power buttons on the remote control and drone. 8. To manually power o the drone, slide the power switch on the drone to the o position. To manually power o the remote control, press the power button on the remote control again Controls 1. Press the left stick forward to launch the drone up to a chosen altitude and then release the left stick to make the drone hover at that altitude. 2. After takeo, the drone should hover in place if there is no input from the remote control (minor drift is to be expected when flying outdoors). Press the trim button to help as needed to calibrate the neutral flight of the drone and reduce any drift. 3. Push the left stick forward to fly the drone up and pull the left stick backward to fly the drone down. 4. Push the right stick to the right to spin the drone clockwise and push the right stick to the left to spin the drone counterclockwise. 5. Push the right stick forward to fly the drone forward and pull the right stick backward to fly the drone backward. 6. To land the drone, start with the drone at any altitude and then pull and hold the left stick backward to fly the drone down slowly. When the drone lands, the propellers will shut o automatically within 3 seconds. Note: If connection is lost during normal flight, the drone will hover and attempt to pair to the remote control for 5 seconds. If pairing is unsuccessful, the drone will begin auto landing. 7. Once the drone has landed and the propellers have stopped spinning, press the power button on the remote control and slide the power switch on the drone to the o position to power o the remote control and drone. Note: The drone features lock motor protection to protect the drone in the event of abnormal working conditions. The status light on the drone will begin to flash rapidly. Power o the remote control and drone, place the drone upright on a flat surface, and then power on and pair the remote control and drone again to resume flying. Contents 1 Stealth Spinner Drone 1 Remote Control 1 DC Charging Cable Getting Started The remote control requires 2 AA 1.5V batteries (not included) and the drone uses a built-in rechargeable lithium-ion battery. Drone 1. Make sure the power switch on the side of the drone is in the o position. 2. Plug the DC end of the charging cable into the charging port on the side of the drone. 3. Plug the A end of the charging cable into a powered USB-A port or a USB-A power adapter (not included). The indicator light on the drone will glow while the drone is charging and will shut o when the vehicle is fully charged. 4. Wait for the drone to fully charge and then unplug the charging cable. Remote control 1. Use a tool to press and hold the battery cover release on the back of the remote control and then slide down the battery cover. 2. Insert 2 AA 1.5V batteries (not included) into the battery compartment according to the battery diagram. 3. Slide the battery cover back into place securely. Power Switch Status Light Charging Port Left Stick Status Light Power Button Right Stick Trim Button Battery Cover Release STEALTH SPINNER 8+ Up 1-800-374-2744 Printed in China WARNING: CHOKING HAZARD – Small Parts. Not for children under 3 years of age. KEEP THIS INSTRUCTION MANUAL AS IT CONTAINS IMPORTANT INFORMATION FOR FUTURE REFERENCE. Due to continuous product improvements, the pictures on this manual may dier slightly from the actual product. BC Down Forward Reverse Left Turn Right Turn • Adult supervision is recommended when operating the vehicle. • Always drive responsibly and make sure driving paths are clear. Never drive towards or in close proximity to people or animals. Never drive on streets or roadways to avoid trac hazards. • Keep fingers, hair, and loose clothing away from tires and all moving parts while the vehicle is in motion. • Avoid exposing the vehicle and remote control to water. Avoid driving through water. Never drive outdoors in rain or snow. Never leave the vehicle or remote control outdoors overnight. • Do not expose the vehicle or remote control to extreme temperatures. • Do not leave the vehicle or remote control near …

Text truncated - open the document above for the full version.

Page 1 of 1 SCS-F236 Attestation of US Agent for Service Process Rev 1.0 Dongguan Aniree Industrial Limited Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA FCC ID: 2BTOH-H3006R FRN: 0037751062 Date of Filing to TCB: 08-25-2026 Ref: Attestation Statements Part 2.911(d)(7) Filing [Dongguan Aniree Industrial Limited] (“the applicant”) certifies that, as of the date of the filing of the application, [FCC US Agent, LLC] is our designated U.S. agent for service of process for the above referenced FCC ID. [Dongguan Aniree Industrial Limited] accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment and will notify the TCB/FCC in a timely manner if the US Processing Agent changes. [FCC US Agent, LLC] accepts, as of the date of the filing of the application, the obligation of the designated U.S. agent for service of process for the above referenced FCC ID. Designated U.S. Agent Information: Name: FCC US Agent, LLC FRN: 0033402884 Address: 3722 Illinois Avenue, Saint Charles, IL, 60174, USA Contact Person: Tim Payne Tel.: 708-571-3148 Email: [email protected] Sincerely, (Applicant printed name) Cathy Deng (Applicant signature) (US Local Agent printed name) Tim Payne (US Local Agent signature)

(Dongguan Aniree Industrial Limited) Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 08-28-2026 Ref: Attestation Statements Part 2.911(d)(5)(i) Filing FCC ID: 2BTOH-H3006R [Dongguan Aniree Industrial Limited] (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. [Dongguan Aniree Industrial Limited] (“the applicant”) certifies that the equipment for which authorization is sought does not include cybersecurity or anti-virus software produced or provided by Kaspersky Lab, Inc. or any of its successors and assignees, including equipment with integrated Kaspersky Lab, Inc. (or any of its successors and assignees) cybersecurity or anti-virus software pursuant to DA-24- 886 and KDB 986446 D01 Covered Equipment Guidance section B(2a). Device is inherently compliant based on hardware limitations or software controls. or A Software Bill of Materials (SBOM) is provided to the TCB for review, and The end-user or third parties cannot install additional software on this device. Sincerely, (Applicant signature) (Cathy Deng) (Dongguan Aniree Industrial Limited) Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 08-28-2026 Ref: Attestation Statements Part 2.911(d)(5)(ii) Filing FCC ID: 2BTOH-H3006R [Dongguan Aniree Industrial Limited] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing “covered” equipment. Sincerely, (Applicant signature) (Cathy Deng)

Declaration Product name:ToyRCDroneStealthSpinner Tradename:SharperImage Model:1020244 Additionalmodel:10XXXXX(whereXXXXXcanbe0000-9999whichrepresent differentcustomers) •MaximumTake-offWeightisequaltoorlessthan150grams; •Operationislimitedtoline-of-sightoperationsequaltoorlessthan 100meters; •Maximumsustainedaltitudemustbeequaltoorlessthan300feet; •NoGPS/GNSSorequivalentsystem(e.g.,noreturn-to-home, waypointmissions,orsubjecttracking); •Noconnectivityornetworkcapability(e.g.,noconnectiontoInternet,mobile apps,cellularnetworks,Wi-Fi),butmayincludeadedicatedradio- frequencylinkbetweencontrolleranddrone,typicallyon2.4GHzor5.8 GHzbands; •RadiofrequencesandWiFiChannelsmaynotbemodifiable orprogrammableandmustconformtoFCCregulatoryrequirements; •Noimagingorsensingcapabilities(e.g.,nophoto/videocamera, microphones,livevideofeed,onboardrecording,orsensorscapable ofsurveillanceordatagatheringonthetoy); •Flighttimemustbeequaltoorlessthan10minutes; •Maximumhorizontalspeedmustbeequaltoorlessthan10meters/ second;•Explicitlymarketedasatoyforrecreationaluse; •Nomodularpayloadinterface,suchasairdropandreleasemechanisms, We hereby declares that the following products , which we have submitted for testing to Bureau Veritas Consumer Products Services (Shenzhen ) Co., Ltd. Dongguan Branch, meets the following exemption requirements for toy drones specified in the DA 26-588 notice issued by the U.S. FCC, and are not included in the U.S. covered list. Because this product is a toy helicopter, not a toy drone. We will take full responsibility for any discrepancy between this declaration and the actual situation. searchlightsandstrobes,andmicro-FPVcamerasandprotectioncages; •Doesnotcontainbrushlessmotors;and•Isnotproducedbyanentity identifiedinSection1709oftheFiscalYear2025NationalDefense AuthorizationAct. Printedname:CathyDeng AuthorizedSignature: CompanyStamp: Date:20260907

Rev 11/20/07 Dongguan Aniree Industrial Limited 2026.8.31 Federal Communications Commission Authorization and Evaluation Division Confidentiality Request regarding application for certification of FCC ID: 2BTOH-H3006R Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, we hereby request confidential treatment of information accompanying this application as outlined below: Exhibit Type File Name (Block Diagram, Schematics, Operational Description) (SCH, Block Diagram,Technical Description) The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Pursuant to DA04-1705 June 15, 2004 of the Commission’s public notice, we also request temporary confidential treatment of information accompanying this application as outlined below: Exhibit Type File Name ( () Sincerely, (signature) (printed name) Cathy Deng

Dongguan Aniree Industrial Limited FCC ID: 2BTOH-H3006R Declaration of Identical Product Hereby, Name of manufacturer: Dongguan Aniree Industrial Limited Address: Room 301, Building 5, No. 15 Changan Xingfanan Road, Changan Town, Dongguan City, Guangdong Province City: Dongguan Country: China declares that: Product description: Toy RC Drone Stealth Spinner Type designation(s): 10XXXXX (where XXXXX can be digits 00000-99999 which represent different customers) Trademark: Sharper Image Family name is technically identical to: Product description: Toy RC Drone Stealth Spinner Type designation: 1020244 Trademark: Sharper Image Certificate number (if applicable) They are identical with the test model 1020244 except the color of the appearance and model number for trading purpose. Date: 2026.8.28 City: Dongguan Name: Cathy Deng Signature

C:\Users\kdyuan\Desktop\kate 资料\A report\POA_Letter.docx Dongguan Aniree Industrial Limited Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Date: 2026.8.28 SUBJECT: FCC Application for FCC ID: 2BTOH-H3006R To Whom It May Concern: We, the undersigned, hereby authorize _Edwin Ye by_Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch___ at __No. 96, Chenwulu Section, Guantai Rd., Houjie Town, Dongguan City, Guangdong 523942, Chinaon our behalf, to apply to the Federal Communications Commission on our equipment. Any and all acts carried out by Edwin Yeby_Bureau Veritas Shenzhen Co., Ltd. Dongguan Branchon our behalf shall have the same effect as acts of our own. This is to advise that we are in full compliance with the Anti- Drug Abuse Act. We, the applicant, are not subject to a denial of federal benefits pursuant to Section 5301 of the Anti-Drug Act of 1988, 21 USC853a, and no party to the application is subject to a denial of federal benefits pursuant to that section. Regards, Cathy Deng

Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 96, Guantai Road (Houjie Section), Houjie Town, Dongguan City, Guangdong Province. 523942. People’s Republic of China. Tel: +86 769 8998 2098 Fax: +86 769 8593 1080 Email: [email protected] Page 1 of 4 Report Version A Reference No.: 2512WDG0159-3 PHOTOGRAPHS OF THE EUT Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 96, Guantai Road (Houjie Section), Houjie Town, Dongguan City, Guangdong Province. 523942. People’s Republic of China. Tel: +86 769 8998 2098 Fax: +86 769 8593 1080 Email: [email protected] Page 2 of 4 Report Version A Reference No.: 2512WDG0159-3 Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 96, Guantai Road (Houjie Section), Houjie Town, Dongguan City, Guangdong Province. 523942. People’s Republic of China. Tel: +86 769 8998 2098 Fax: +86 769 8593 1080 Email: [email protected] Page 3 of 4 Report Version A Reference No.: 2512WDG0159-3 Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 96, Guantai Road (Houjie Section), Houjie Town, Dongguan City, Guangdong Province. 523942. People’s Republic of China. Tel: +86 769 8998 2098 Fax: +86 769 8593 1080 Email: [email protected] Page 4 of 4 Report Version A Reference No.: 2512WDG0159-3

Scale 1:1 Place Holder Will update later. Pantone Black C WhitePantone 877C (Metallic) Pantone 2035C Sharper Image® Distributed by and © 2025 MerchSource, LLC. Irvine, CA. 92618. All Rights Reserved. Made in China Model No.: 1020244, FCC ID: 2BTOH-H3006R Batch Code: 59893A26113 Model No.: 1020244, FCC ID: 2BTOH-H3006R Batch Code: 59893A26113 45.64MM 3.51MM 6.25MM 38MM 3.6MM

Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 96, Guantai Road (Houjie Section), Houjie Town, Dongguan City, Guangdong Province. 523942. People’s Republic of China. Tel: +86 769 8998 2098 Fax: +86 769 8593 1080 Email: [email protected] Page 1 of 5 Report Version A Reference No.: 2512WDG0159-3 PHOTOGRAPHS OF THE EUT 2.4GHZ RF ANT. Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 96, Guantai Road (Houjie Section), Houjie Town, Dongguan City, Guangdong Province. 523942. People’s Republic of China. Tel: +86 769 8998 2098 Fax: +86 769 8593 1080 Email: [email protected] Page 2 of 5 Report Version A Reference No.: 2512WDG0159-3 Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 96, Guantai Road (Houjie Section), Houjie Town, Dongguan City, Guangdong Province. 523942. People’s Republic of China. Tel: +86 769 8998 2098 Fax: +86 769 8593 1080 Email: [email protected] Page 3 of 5 Report Version A Reference No.: 2512WDG0159-3 Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 96, Guantai Road (Houjie Section), Houjie Town, Dongguan City, Guangdong Province. 523942. People’s Republic of China. Tel: +86 769 8998 2098 Fax: +86 769 8593 1080 Email: [email protected] Page 4 of 5 Report Version A Reference No.: 2512WDG0159-3 Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 96, Guantai Road (Houjie Section), Houjie Town, Dongguan City, Guangdong Province. 523942. People’s Republic of China. Tel: +86 769 8998 2098 Fax: +86 769 8593 1080 Email: [email protected] Page 5 of 5 Report Version A Reference No.: 2512WDG0159-3

Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 96, Guantai Road (Houjie Section), Houjie Town, Dongguan City, Guangdong Province. 523942. People’s Republic of China. Tel: +86 769 8998 2098 Fax: +86 769 8593 1080 Email: [email protected] Page 1 of 6 Report Version A Test Report No.: FM2512WDG0159-2 RF EXPOSURE REPORT Applicant Dongguan Aniree Industrial Limited Address Room 301, Building 5, No. 15 Changan Xingfanan Road, Changan Town, Dongguan City, Guangdong Province Manufacturer or Supplier Dongguan Aniree Industrial Limited Address Room 301, Building 5, No. 15 Changan Xingfanan Road, Changan Town, Dongguan City, Guangdong Province Product: Toy RC Drone Stealth Spinner Brand Name: Sharper Image Model: 1020244 Additional Model & Model Difference 10XXXXX (where XXXXX can be digits 00000-99999 which represent different customers); see item 3.1 Date of tests Dec. 15, 2025 ~ Aug. 06, 2026 FCC Part 2 (Section 2.1093) KDB 447498 D01 V06 IEEE C95.1 CONCLUSION: The submitted sample was found to COMPLY with the test requirement Prepared by Eric Fang Project Engineer / EMC Department Approved by Glyn He Assistant Manager / EMC Department Date: Aug. 28, 2026 This report is governed by, and incorporates by reference, the Conditions of Testing as posted at the date of issuance of this report at http://www.bureauveritas.com/home/about-us/our-business/cps/about-us/terms-conditions/ and is intended for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. Measurement uncertainty is only provided upon request for accredited tests. Statements of conformity are based on simple acceptance criteria without taking measurement uncertainty into account, unless otherwise requested in writing. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence or if you require measurement uncertainty; provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 96, Guantai Road (Houjie Section), Houjie Town, Dongguan City, Guangdong Province. 523942. People’s Republic of China. Tel: +86 769 8998 2098 Fax: +86 769 8593 1080 Email: [email protected] Page 2 of 6 Report Version A Test Report No.: FM2512WDG0159-2 TABLE OF CONTENTS RELEASE CONTROL RECORD ................................................................................ 3 1. CERTIFICATION .............................................................................................. 4 2. RF EXPOSURE DEFINE ................................................................................. 5 3. CLASSIFICATION ........................................................................................... 5 4. SAR TEST EXCLUSION THRESHOLDS ........................................................ 6 Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 96, Guantai Road (Houjie Section), Houjie Town, Dongguan City, Guangdong Province. 523942. People’s Republic of China. Tel: +86 769 8998 2098 Fax: +86 769 8593 1080 Email: [email protected] Page 3 of 6 Report Version A Test Report No.: FM2512WDG0159-2 RELEASE CONTROL RECORD ISSUE NO. REASON FOR CHANGE DATE ISSUED FM2512WDG0159-2 Original release Aug. 28, 2026 Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 96, Guantai Road (Houjie Section), Houjie Town, Dongguan City, Guangdong Province. 523942. People’s Republic of China. Tel: +86 769 8998 2098 Fax: +86 769 8593 1080 Email: [email protected] Page 4 of 6 Report Version A Test Report No.: FM2512WDG0159-2 1. CERTIFICATION FCC ID: 2BTOH-H3006R PRODUCT: Toy RC Drone Stealth Spinner BRAND NAME: Sharper Image MODEL NO.: 1020244 ADDITIONAL NO.: 10XXXXX (where XXXXX can be digits 00000-99999 which represent different customers) APPLICANT: Dongguan Aniree Industrial Limited STANDARDS: FCC Part 2 (Section 2.1093) KDB 447498 D01 V06 IEEE C95.1 NOTE: Additional models (see above table) are identical with the test model 1020244 except the color of the appearance and model number for trading purpose. Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 96, Guantai Road (Houjie Section), Houjie Town, Dongguan City, Guangdong Province. 523942. People’s Republic of China. Tel: +86 769 8998 2098 Fax: +86 769 8593 1080 Email: [email protected] Page 5 of 6 Report Version A Test Report No.: FM2512WDG0159-2 2. RF EXPOSURE DEFINE The corresponding SAR Exclusion Threshold condition, listed below: 1) The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤ 50 mm are determined by: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] ·[√f(GHz)] ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR,16 where ➢ f(GHz) is the RF channel transmit frequency in GHz ➢ Power and distance are rounded to the nearest mW and mm before calculation ➢ The result is rounded to one decimal place for comparison The test exclusions are applicable only when the minimum test separation distance is ≤ 50 mm and for transmission frequencies between 100 MHz and 6 GHz. When the minimum test sepa…

Text truncated - open the document above for the full version.

ANTENNASPECIFICATION 1、PRODUCTTECHNICALSPECIFICATION ElectricalSpecifications FrequencyRange(MHz)2400-2500 Bandwidth(MHz)100 InputImpendence(Ω)50 V.S.W.R≤2 Gain(dBi) PolarizationTyp 0 dBi eVertical LightningProtection PowerCapacity(w)0.5 MechanicalSpecifications AntennaLength(mm)Ø1.5X33和Ø1.5X80 RadiatorCu ConnectType Weldment WorkingTemp(°C) -40~65 StorageTemperature(°C) -40~80 Color Weight(g) 0.37g(8cmlenth) and 0.15g(3.3cm) AC grounding Transparent ANTENNA TYPE Wire Antenna, with 0dBi gain This antenna is specially designed and manufactured for four -drive UFOs, featuring high cost-effectiveness, compact structure and easy production. 2、PRODUCTPICTURE 3、PRODUCTSPECIFICATIONCHART Product brief introduction Tinplating Tinplating 4、STATIONARYWAVEPATTERN 5、Gain Pattern 5、Manufacturer Nanyang Longjia Technology Industry Co., LTD Address: Taoyuan Community, Chimei Town, Neixiang County, Nanyang City, Henan Province, China

Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 96, Guantai Road (Houjie Section), Houjie Town, Dongguan City, Guangdong Province. 523942. People’s Republic of China. Tel: +86 769 8998 2098 Fax: +86 769 8593 1080 Email: [email protected] Page 1 of 35 Report Version A Test Report No.: RF2512WDG0159-2 TEST REPORT Applicant: Dongguan Aniree Industrial Limited Address: Room 301, Building 5, No. 15 Changan Xingfanan Road, Changan Town, Dongguan City, Guangdong Province Manufacturer or Supplier Dongguan Aniree Industrial Limited Address Room 301, Building 5, No. 15 Changan Xingfanan Road, Changan Town, Dongguan City, Guangdong Province Product: Toy RC Drone Stealth Spinner Brand Name: Sharper Image Model: 1020244 Additional Model & Model Difference 10XXXXX (where XXXXX can be digits 00000-99999 which represent different customers); see item 3.1 Date of tests Dec. 15, 2025 ~ Aug. 06, 2026 the tests have been carried out according to the requirements of the following standard: FCC Part 15, Subpart C, Section 15.249 CONCLUSION: The submitted sample was found to COMPLY with the test requirement Prepared by Eric Fang Project Engineer / EMC Department Approved by Glyn He Assistant Manager / EMC Department Date: Aug. 28, 2026 This report is governed by, and incorporates by reference, the Conditions of Testing as posted at the date of issuance of this report at http://www.bureauveritas.com/home/about-us/our-business/cps/about-us/terms-conditions/ and is intended for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. Measurement uncertainty is only provided upon request for accredited tests. Statements of conformity are based on simple acceptance criteria without taking measurement uncertainty into account, unless otherwise requested in writing. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence or if you require measurement uncertainty; provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 96, Guantai Road (Houjie Section), Houjie Town, Dongguan City, Guangdong Province. 523942. People’s Republic of China. Tel: +86 769 8998 2098 Fax: +86 769 8593 1080 Email: [email protected] Page 2 of 35 Report Version A Test Report No.: RF2512WDG0159-2 TABLE OF CONTENTS RELEASE CONTROL RECORD ............................................................................................................ 3 1 SUMMARY OF TEST RESULTS .................................................................................................... 4 2 MEASUREMENT UNCERTAINTY ................................................................................................. 4 3 GENERAL INFORMATION ............................................................................................................ 5 3.1 GENERAL DESCRIPTION OF EUT ............................................................................................ 5 3.2 DESCRIPTION OF TEST MODES .............................................................................................. 6 3.3 GENERAL DESCRIPTION OF APPLIED STANDARDS ............................................................. 8 3.4 DESCRIPTION OF SUPPORT UNITS ........................................................................................ 8 3.5 DUTY CYCLE OF TESET SIGNAL.............................................................................................. 9 3.6 CONFIGURATION OF SYSTEM UNDER TEST ....................................................................... 10 4. TEST TYPES AND RESULTS .......................................................................................................11 4.1 RADIATED EMISSION MEASUREMENT .................................................................................. 11 4.1.1 LIMITS OF RADIATED EMISSION MEASUREMENT ..................................................... 11 4.1.2 TEST INSTRUMENTS ..................................................................................................... 12 4.1.3 TEST PROCEDURES ..................................................................................................... 13 4.1.4 DEVIATION FROM TEST STANDARD ........................................................................... 13 4.1.5 TEST SETUP ................................................................................................................... 14 4.1.6 EUT OPERATING CONDITIONS .................................................................................... 15 4.1.7 TEST RESULTS ....................................…

Text truncated - open the document above for the full version.