2BTOQ-M-CTR100AI Pointer

AI

Pointer Operation
Instruction Product

list

M-CTR100
M-CTR101 01 AI
Pointer Receiver Charging
Cable Portable
bagProduct
Instruction Start
to
Use Receiver
Installation
Instructions Place
the
receiver
with
the
front
arrow
facing
up
according
to
the
installation
prompt
instructions If
placed
above
the
TV,
fix
it
by
means
of
a
clip.
(As
shown
in
Figure
1) Figure 1Figure 2 Step

1 02 If
placed
under
the
TV,
it
should
be
fixed
by
magnetic
attraction.
If
the
TV
cannot
be
directly
attached,
a
magnetic
sheet
needs
to
be
attached
to
the
intended
location
of
the
TV,
and
then
the
receiver
should
be
fixed
by
magnetic
attraction.
(As
shown
in
Figure
2) After
the
above
steps
are
completed
the
product
starts
to
work
normally Plug
the
USB
interface
of
the
receiver
into
the
USB
port
of
the
computer,
and
connect
the
computer
to
the
projector
or
smart
TV Step

2 Turn
the
power
button
on
the
left
side
of
the
AI
pointer
to
the
ON
icon
to
start
the
demonstration
pen.
The
indicator
light
at
the
top
will
light
up
green Switch
the
mode
button
on
the
right
side
of
the
AI
teaching
stick
to
the
corresponding
computer
system.
For
Windows,
switch
it
to
the
bottom;
for
Apple
Mac
Os,
switch
it
to
the
top Step

3 Step

4 Receiver Computer projector Receiver Computer Smart
Screen Screen number ① ② Power Click ③ ④ Magnifying
glass/aperture Short
press Long press Exit
PPT
Projector ⑤ ⑥ Pointer
return
to
center 03 Key
function
description Introduction
to
the
button
functions
of
the AI
pointer operation Click Click Corresponding
function
description Power
light PPT

PageUp
No operatipn Push/Pull PPT

PageDown
RE ① OK ② ③ ④ ⑤ ⑥ ⑦ ⑧ ⑩



Microsoft
office
software
does
not
support
the
quick
functions
of
spotlight
and

magnifying
glass






Mac
office
software
does
not
support
the
quick
functions
of
spotlight
,magnifying
glass
and
digital
laser
Remark ⑨ 11 12 ⑦ Eraser function Short press Cleaning All Long press Blank Screen Brush ⑧ The right mouse button Enter PPT Projector Confirm key, left mouse button Digital Cursor receiver 04 number Corresponding
function
description operation Short press Long press Long press Click Indicator
light
status
description The
green
light
is
always
on Short Press Long Press ⑩ 11 12 ⑨ Switch up Switched Working
condition The
red
light
remains on
constantly Low

battery
state The
red
light
remains on
constantly Charging Blinking
red
light System
Error The
white
light
remains
on
constantly Charge
complete RE OK Pow er
light Cha rge
light The
blue
light
is
flashing Pending
connection
status The
blue
light
remains
on
constantly working
condition Pow er
light Switch down Mac system Windows system FCC
Caution: Any
Changes
or
modifications
not
expressly
approved
by
the
party
responsible
for
compliance
could
void
the
user's
authority
to
operate
the
equipment. This
device
complies
with
part
15
of
the
FCC
Rules.
Operation
is
subject
to
the
following
two
conditions:
(1)
This
device
may
not
cause
harmful
interference,
and
(2)
this
device
must
accept
any
interference
received,
including
interference
that
may
cause
undesired
operation. Note:
This
equipment
has
been
tested
and
found
to
comply
with
the
limits
for
a
Class
B
digital
device,
pursuant
to
part
15
of
the
FCC
Rules.
These
limits
are
designed
to
provide
reasonable
protection
against
harmful
interference
in
a
residential
installation.
This
equipment
generates,
uses
and
can
radiate
radio
frequency
energy
and,
if
not
installed
and
used
in
accordance
with
the
instructions,
may
cause
harmful
interference
to
radio
communications.
However,
there
is no
guarantee
that
interference
will
not
occur
in
a
particular
installation .
If
this
equipment
does
cause
harmful
interference
to
radio
or
television
reception,
which
can
be
determined
by
turning
the
equipment
off
and
on,
the
user
is
encouraged
to
try
to
correct
the
interference
by
one
or
more
of
the
following
measures: —Reorient
or
relocate
the
receiving
antenna. —Increase
the
separation
between
the
equipment
and
receiver. —Connect
the
equipment
into
an
outlet
on
a
circuit
different
from
that
to
which
the
receiver
is
connected. —Consult
the
dealer
or
an
experienced
radio/TV
technician
for
help. FCC
Radiation
Exposure
Statement: For
AI
Pointer(
M- CTR100),this
equipment
complies
with
FCC
radiation
exposure
limits
set
forth
for
an
uncontrolled
environment
. This
transmitter
must
not
be
co-located
or
operating
in
conjunction
with
any
other
antenna
or
transmitter. For
Receiver(M-CTR101),this
equipment
complies
with
FCC
radiation
exposure
limits
set
forth
for
an
uncontrolled
environment
. This
transmitter
must
not
be
co-located
or
operating
in
conjunction
with
any
other
antenna
or
transmitter. This equipment should be installed and operated with minimum distance 20cm between the radiator& your body. UWB
devices
may
not
be
employed
for
the
operation
of
toys.
Operation
onboard
an
aircraft,
a
ship
or
a
satellite
is
prohibited. This equipment may only be operated indoors. Operation outdoors is in violation of 47 U.S.C. 301 and could subject the operator to serious legal penalties. 05 M-CTR100 AI
Pointer Make
Presentation
More
Brilliant
And
Intelligent

CFR 47 §2.911(d)(5)(i)(ii) Attestation Letter Chengdu Yunjiu Intelligent Control Technology co., Ltd Add: Room 605, Building 1, No.777, Chengdu High-Tech Zone, Pilot Free, Trade Zone Chengdu, China Tel: +86 13790932214 Email: [email protected] Attestation Letter Date: 2026-01-15 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Ref: Attestation Statements CFR 47 §2.911(d)(5)(i)(ii) Filing F CC ID: 2BTOQ-M-CTR100 C hengdu Yunjiu Intelligent Control Technology co., Ltd (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Chengdu Yunjiu Intelligent Control Technology co., Ltd (“the applicant”) certifies that as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Chengdu Yunjiu Intelligent Control Technology co., Ltd (“the applicant”) certifies that the equipment does not use Kaspersky's software information. Sincerely, Signature Printed Name: Zhefeng Geng Title:Manager

U.S. AGENT LETTER OF ATTESTATION Date: 2026-01-15 FEDE RAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Ref: Attestation Statements CFR 47 §2.911(d)(7) Filing FCC ID: 2BTOQ-M-CTR100 Chengdu Yunjiu Intelligent Control Technology Co., Ltd (“the Applicant”) certifies that, as of the date of the filing of the application, GLOCERTS TECHNOLOGY INC (U.S. agent). is our designated U.S. agent for service of process for the above referenced FCC ID. Chengdu Yunjiu Intelligent Control Technology Co., Ltd (“the Applicant”) accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment.GLOCERTS TECHNOLOGY INC (U.S. agent) accepts, as of the date of the filing of the application, the obligation of the designated U.S. agent for service of process for the above referenced FCC ID. Designated U.S. Agent Information: Company Name:GLOCERTS TECHNOLOGY INC Address: 19784 SUNKISSED RIDGE DR, RIVERSIDE, CA 92507 FRN:0036339737 Tel.:(626) 588-8039 Email: [email protected] Signed by (printed name):HuiyingFan Signature: Applicant: Chengdu Yunjiu Intelligent Control Technology Co., Ltd Add: Room 605, Building 1, No.777, Chengdu High-Tech Zone, Pilot Free, Trade Zone Chengdu, China FRN: 0037751096 Tel: +86 13790932214 Email: [email protected] Signed by (printed name): Zhefeng Geng Title: Manager Signature: CFR 47 §2.911(d)(7) U.S Agent

QA-FR-170-B Chengdu Yunjiu Intelligent Control Technology co., Ltd Add: Room 605, Building 1, No.777, Chengdu High-Tech Zone, Pilot Free, Trade Zone Chengdu, China Tel: +86 13790932214 Email: [email protected] FCC Authorization Date: 2026-01-15 FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 S ubject: Agent Authorization To whom it may concern: We , Chengdu Yunjiu Intelligent Control Technology co., Ltd Hereby authorizes World Alliance Testing & Certification (Shenzhen) Co., Ltd to act on its behalf in all matters relating to application for Equipment authorization, including the signing of all documents relating to these matters. All acts carried out by World Alliance Testing & Certification (Shenzhen) Co., Ltd on our behalf shall have the same effect as our own action. W e, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. T his authorization is valid until further written notice from the applicant. S incerely Yours, Client’s signature Printed Name: Zhefeng Geng Title:Manager

Q A-FR-171-A Chengdu Yunjiu Intelligent Control Technology co., Ltd Add: Room 605, Building 1, No.777, Chengdu High-Tech Zone, Pilot Free, Trade Zone Chengdu, China Tel: +86 13790932214 Email: [email protected] FCC Confidential Authorization Date: 2026-01-16 FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Confidentiality Request regarding application for certification of FCC ID: 2BTOQ-M-CTR100 In accordance with Sections 0.457 and 0.459 of the Commission’s Rules, (Chengdu Yunjiu Intelligent Control Technology co., Ltd) hereby requests long-term confidential treatment of information accompanying this application as outlined below: •Block Diagram •Schematics •Operation Description T he above materials contain proprietary and confidential information not customarily released to the public. The public disclosure of these materials provides unjustified benefits to its competitors in the market. S incerely, Signature: P rinted Name: Zhefeng Geng Title:Manager

Report No.: 2605P42910E Page 1 of 4 EUT EXTERNAL PHOTOGRAPHS Report No.: 2605P42910E Page 2 of 4 Report No.: 2605P42910E Page 3 of 4 Report No.: 2605P42910E Page 4 of 4 Port

Label: Label location

Report No.: 2605P42910E Page 1 of 8 EUT INTERNAL PHOTOGRAPHS Report No.: 2605P42910E Page 2 of 8 Report No.: 2605P42910E Page 3 of 8 UWB ANT Report No.: 2605P42910E Page 4 of 8 UWB TX/RX UWB RX Report No.: 2605P42910E Page 5 of 8 Report No.: 2605P42910E Page 6 of 8 Report No.: 2605P42910E Page 7 of 8 Report No.: 2605P42910E Page 8 of 8 BLE ANT

Report No.: 2605P42910ED Report Template: TR-4-E-016/V1.2 Page 1 of 7 RF Exposure Evaluation Report Report No.: 2605P42910ED Applicant: Chengdu Yunjiu Intelligent Control Technology Co., Ltd Address: Room 605, Building 1, No.777,Chengdu High-Tech Zone, Pilot Free Trade Zone Chengdu China Product Name: AI Pointer Product Model: M-CTR100 Multiple Models: N/A Trade Mark: N/A FCC ID: 2BTOQ-M-CTR100 Standards: 47 CFR §1.1310 KDB 447498 D01 General RF Exposure Guidance v06 Test Result: Complied Report Date: 2026-02-04 Reviewed by: Approved by: Luke Li Project Engineer Jacob Kong Manager Prepared by: World Alliance Testing & Certification (Shenzhen) Co., Ltd No. 1002, East Block, Laobing Building, Xingye Road 3012, Xixiang street, Bao'an District, Shenzhen, Guangdong, People’s Republic of China This report may contain data that are not covered by the NVLAP accreditation and shall be marked with an asterisk “★” Report No.: 2605P42910ED Report Template: TR-4-E-016/V1.2 Page 2 of 7 Announcement 1. This test report shall not be reproduced except in full, without the written approval of World Alliance Testing & Certification (Shenzhen) Co., Ltd 2. The results in this report apply only to the sample tested. 3. This report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the U.S. Government. 4. The information marked “#” is provided by the applicant, the laboratory is not responsible for its authenticity and this information can affect the validity of the result in the test report. Customer model name, addresses, names, trademarks etc. are included. Revision History Version No. Issued Date Description 00 2026-02-04 Original Report No.: 2605P42910ED Report Template: TR-4-E-016/V1.2 Page 3 of 7 Contents 1 General Information ............................................................................................................................ 4 1.1 Client Information ...................................................................................................................... 4 1.2 Product Description of EUT ....................................................................................................... 4 1.3 Laboratory Location ................................................................................................................... 4 2 RF Exposure Evaluation-SAR ............................................................................................................ 5 2.1 Standard .................................................................................................................................... 5 2.2 Result......................................................................................................................................... 5 3 RF Exposure Evaluation-MPE ............................................................................................................ 6 3.1 Standard .................................................................................................................................... 6 3.2 Result......................................................................................................................................... 7 Report No.: 2605P42910ED Report Template: TR-4-E-016/V1.2 Page 4 of 7 1 General Information 1.1 Client Information Applicant: Chengdu Yunjiu Intelligent Control Technology Co., Ltd Address: Room 605, Building 1, No.777,Chengdu High-Tech Zone, Pilot Free Trade Zone Chengdu China Manufacturer: Chengdu Yunjiu Intelligent Control Technology Co., Ltd Address: Room 605, Building 1, No.777,Chengdu High-Tech Zone, Pilot Free Trade Zone Chengdu China 1.2 Product Description of EUT The EUT is AI Pointer that contains BLE and UBW radios. Sample Serial Number 3GG2-2, 3GG2-3 (assigned by WATC) Sample Received Date 2026-01-22 Sample Status Good Condition Frequency Range BLE: 2402MHz - 2480MHz UBW: 7987.2MHz Maximum Conducted Output Power BLE: -7.19dBm UBW: -5.01dBm/50MHz Modulation Technology BLE: GFSK UBW: BPSK Antenna Gain # BLE: 0.74dBi UBW: 3.46dBi Spatial Streams BLE: SISO (1TX, 1RX) UBW: SIMO (1TX, 2RX) Power Supply DC 3.7V from battery or DC 5V from USB port Adapter Information N/A Modification Sample No Modification by the test lab 1.3 Laboratory Location World Alliance Testing & Certification (Shenzhen) Co., Ltd No. 1002, East Block, Laobing Building, Xingye Road 3012, Xixiang street, Bao'an District, Shenzhen, Guangdong, People’s Republic of China Tel: +86-755-29691511, Email: [email protected] The lab has been recognized as the FCC accredited lab under the KDB 974614 D01 and is listed in the FCC Public Access Link (PAL) database, FCC Registration No. : 463912, the FCC Designation No. : CN5040. The lab has been recognized by Innovation, Science and Economic Development Canada to test to Canadian radio equipment requirements, the CAB identifier: CN0160. Report No.: 2605P42910ED Report Template: TR-4-E-016/V1.2 Page 5 of 7 2 RF Exposure Evaluation-SAR 2.1 Standard According to §1.1310, radio frequency devices shall be operated in a manner that ensure that the public is not exposed to radio frequency energy level in excess of the Commission’s guideline. According to KDB447498 D01 General RF Exposure Guidance v06: The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤ 50 mm are determined by: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] • [√f(GHz)] ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR, where • f(GHz) is the RF channel transmit frequency in GHz • Power and distance are rounded to the nearest mW and mm before calculation • The result is rounded to one decimal place for comparison • 3.0 and 7.5 are referred to as the numeric thresholds in the step 2 below The test exclusions are applicable only when the minimum test separation distance is ≤ 50 mm and for transmission frequencies between 100 MHz and 6 GHz. When the minimum…

Text truncated - open the document above for the full version.

Antenna Specification ITEM ANT SPEC Model Name 2.4G ANT Antenna type PCB Antenna Antenna Gain 0.74dBi Manufacturer Shenzhen Kexin Wireless Technology Co., Ltd. Building H, Hongyongli Industrial Zone, Shabeili, Baolong Sub- district, Longgang District, Shenzhen City Antenna Photo Size Electrical Specifications Antenna Pattern 0.74

Report No.: 2605P42910EB Report Template: TR-4-E-008/V1.2 Page 1 of 53 FCC Test Report Report No.: 2605P42910EB Applicant: Chengdu Yunjiu Intelligent Control Technology Co., Ltd Address: Room 605, Building 1, No.777,Chengdu High-Tech Zone, Pilot Free Trade Zone Chengdu China Product Name: AI Pointer Product Model: M-CTR100 Multiple Models: N/A Trade Mark: N/A FCC ID: 2BTOQ-M-CTR100 Standards: FCC CFR Title 47 Part 15C (§15.247) Test Date: 2026-01-27 to 2026-01-30 Test Result: Complied Report Date: 2026-02-04 Reviewed by: Approved by: Luke Li Project Engineer Jacob Kong Manager Prepared by: World Alliance Testing & Certification (Shenzhen) Co., Ltd No. 1002, East Block, Laobing Building, Xingye Road 3012, Xixiang street, Bao'an District, Shenzhen, Guangdong, People’s Republic of China This report may contain data that are not covered by the NVLAP accreditation and shall be marked with an asterisk “★” Report No.: 2605P42910EB Report Template: TR-4-E-008/V1.2 Page 2 of 53 Announcement 1. This test report shall not be reproduced except in full, without the written approval of World Alliance Testing & Certification (Shenzhen) Co., Ltd 2. The results in this report apply only to the sample tested. 3. This report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the U.S. Government. 4. The information marked “#” is provided by the applicant, the laboratory is not responsible for its authenticity and this information can affect the validity of the result in the test report. Customer model name, addresses, names, trademarks etc. are included. Revision History Version No. Issued Date Description 00 2026-02-04 Original Report No.: 2605P42910EB Report Template: TR-4-E-008/V1.2 Page 3 of 53 Contents 1 General Information ............................................................................................................................ 4 1.1 Client Information ...................................................................................................................... 4 1.2 Product Description of EUT ....................................................................................................... 4 1.3 Antenna information .................................................................................................................. 4 1.4 Related Submittal(s)/Grant(s) .................................................................................................... 5 1.5 Measurement Uncertainty ......................................................................................................... 5 1.6 Laboratory Location ................................................................................................................... 5 1.7 Test Methodology ...................................................................................................................... 5 2 Description of Measurement .............................................................................................................. 6 2.1 Test Configuration ...................................................................................................................... 6 2.2 Test Auxiliary Equipment ........................................................................................................... 7 2.3 Interconnecting Cables .............................................................................................................. 7 2.4 Block Diagram of Connection between EUT and AE ................................................................ 7 2.5 Test Setup .................................................................................................................................. 8 2.6 Test Procedure ........................................................................................................................ 10 2.7 Measurement Method............................................................................................................... 11 2.8 Measurement Equipment ........................................................................................................ 12 3 Test Results ....................................................................................................................................... 13 3.1 Test Summary .......................................................................................................................... 13 3.2 Limit ......................................................................................................................................... 14 3.3 AC Line Conducted Emissions Test Data ................................................................................ 15 3.4 Radiated emission Test Data ................................................................................................... 17 3.5 RF Conducted Test Data ......................................................................................................... 41 3.5.1 6 dB Emission Bandwidth ............................................................................................ 41 3.5.2 99% Occupied Bandwidth ............................................................................................ 41 3.5.3 Maximum Conducted Peak Output Power ................................................................... 42 3.5.4 Power Spectral Density ................................................................................................ 42 3.5.5 100 kHz Bandwidth of Frequency Band Edge ............................................................. 43 3.5.6 Conducted Spurious Emission ..................................................................................... 43 3.5.7 Duty Cycle .................................................................................................................... 43 4 Test Setup Photo ...............................................................................................................…

Text truncated - open the document above for the full version.

Report No.: 2605P42910EB Page 1 of 3 TEST SETUP PHOTOGRAPHS AC Line Conducted Emission Report No.: 2605P42910EB Page 2 of 3 Radiated Emission Below 30MHz 30MHz~1 GHz Report No.: 2605P42910EB Page 3 of 3 1~18 GHz 18~25 GHz