2BTQS-WSCOR2000Worksport COR Hub

USER MANUAL COR Portable Power Station ABSTRACT COR 2000W Inverter with Integrated PV and COR 960Wh Battery Pack English Version The purpose of this report is to outline the key features and d proper operation of the COR Unit. Troubleshooting methods and Worksport staff contact information is included. Get Started > V1.0 Read the ENTlRE User Manual before operating. 1. Pay attention to safety when handling the COR Portable Power Station. 2. Never disassemble, puncture, shock, damage, or incinerate the product. 3. Keep COR Portable Power Station and the accessories dry. DO NOT expose the product and accessories to high heat. 4. Children or people with disabilities should use the product under adult supervision. 5. Recycle and dispose of COR Portable Power Station in accordance with local laws and regulations. jury. Make sure to use the product according to the following safety rules and guidelines. DO NOT replace the COR Battery Pack during operation. 01 Failure to operate the product correctly may result in damage to the product or personal property and cause serious injury. Worksport Ltd. will not assume any legal responsibility. DO NOT use the product with incompatible components or alter the product in any way without following the instructions provided by Worksport Ltd. Failure to follow these instructions will render Worksport Ltd. after-sales services and the product warranty void. These Safety Guidelines include instructions for safety, operation and maintenance. lt is important to read and follow all the instructions and warnings in the user manual before assembly, set up, or use. In compliance with laws and regulations, Worksport Ltd. reserve interpretation of this document and all documents related to the product. This document is subject to changes (updates, revisions, or termination) without prior notice. Please visit Worksport Ltd. website to obtain the latest product information. DISCLAIMER STANDARDOPTIONAL SMART LIFE APP COR Portable Power Station Instruction ManualPouch PV/Solar Charging Cable x1 x1 x1x1x1 x1 COR Main Battery AC Charging Cable Control, monitor and customize your COR Portable Power Station from afar with the Smart Life App. 02 WHAT'S IN THE BOX x1x1 Battery ChargerCar Discharging Cable 03 OVERVIEW 01. COR PORTABLE POWER STATION02. COR MAIN BATTERY COR Main Battery COR Portable Power Station Front TopRear FrontRight-Side Rear of COR Portable Power Station Left-Side Left-SideRight-Side 1. LCD Display9. 4x18W USB-A Ports 2. Previous Screen10. 2x100W USB-C Ports 3. Next Screen11. 4xNEMA AC Plugs 4. AC ON/OFF12. Car Discharging Port 5. System ON/OFF13. AC Charging Input Port 6. DC ON/OFF14. AC Charging Input Port FUSE 7. LCD Brightness Increase15. M25 PV Charging Input Port 8. Side LED Brightness Increase 16. Side LEDs 1. Carrying Handle4. Power Button 2. Charging Input Port5. COR Hub Connection Port 3. Battery Level Indicator Lights 1 64 73 5 15 16 82 11 12 13 14 2 1 4 5 3 9 10 04 03. LCD DISPLAY OVERVIEW (CONT.) There are a total of 4 screens -and Warning Screen. When the system is turned on, the default screen (after a brief startup screen) is the Main Screen -01. Click right arrow on unit or swipe on screen to switch to Main Screen - 02. To return back to default screen, click left arrow or swipe back on screen. Main Screen - 01Main Screen - 02 1. Remaining Battery Percentage5. AC Output Indicator 2. Discharge/Charge/Stand State6. DC Output Indicator 3. AC Output Power7. Car Port Indicator 4. AC/PV Input Power8. Bluetooth Connection 9. Warning13. Side LED ON/OFF/Adjust Brightness 10. AC Output Switch14. Fan ON/OFF 11. DC Output Switch15. Temperature Levels 12. Car Port Switch 3 8 5 9 4 7 6 2 1 11 14 1012 1315 05 OVERVIEW (CONT.) Information Screen Product SpeciƴHation ScreenInformation Screen Click left or right arrow on unit or swipe on screen to return to Main Screen - 01. Click left or right arrow on unit or swipe on screen to return to Main Screen - 01. 1. COR Main Battery information6. DC Output Indicator 2. Power Board Information7. PV/Solar Input Indicator 3. AC Output Power8. Bluetooth Connection 4. AC/PV Input Power9. Warning 5. AC Output Indicator 6. DC Output Indicator 7. PV/Solar Input Indicator 3. AC Output Power8. Bluetooth Connection 4. AC/PV Input Power9. Warning 5. AC Output Indicator 3 8 5 9 4 7 6 12 3 8 5 9 4 7 6 12 AC/DC OUTPUT LCD SCREEN BRIGHTNESS SIDE LED BRIGHTNESS Press the "DC output switch" or "AC output switch" once to turn on their corresponding DC/AC output sockets; press again to turn them off. The LCD Screen brightness can be controlled via the LCD Brightness Increase button. Each click of the button increases the screen brightne percentage, based on the last known percentage. The increments are: 10% -> 25% -> 50% -> 75% -> 100% -> 10% -> The Side LED brightness can be controlled via the Side LED Brightness Increase button. Each click of the button increases the Side LED brightness by 25% increments. When 100% brightness is achieved, the next click of the button turns the Side LEDs off. In other words, the increments are: 0% -> 25% -> 50% -> 75% -> 100% -> 0% -> Cdbi 06 Warning Screen If a warning appears during the use of the product and the warning icon persists after restart, please stop using the product immediately (do not attempt to charge or discharge it). Please contact Worksport Ltd. customer service (for contact information, refer to page 09 or check the rear cover of the Manual). POWER ON/OFF CONTROL YOUR DEVICE Press and hold the main power button once (for about 3 seconds) to turn on the product. The LCD screen lights up. Press and hold the main power button (for about 3 seconds) to turn off the product, and the LCD screen. OVERVIEW (CONT.) Click left or right arrow on unit or swipe on screen to return to Main Screen - 01. Long Press for Power-On/ Long Press for Power-Off COR Portable Power Station Warning Screen AC CHARGINGBATTERY CHARGING • For AC charging, we recommend that you use a power socket with a capaci…

Text truncated - open the document above for the full version.

Worksport USA Operations Corporation 2.911 (d)(5)(i) Equipment Type Attestation v1.2 Section 2.911(d)(5)(i) Certification – Equipment Type Company name: Worksport USA Operations Corporation Address: 2500 N America Drive West Seneca, NY 14224 USA Product Name: Worksport COR Hub FCC ID: 2BTQS-WSCOR2000 Model(s): WS-COR-2000 2.911(d)(5)(i) Equipment Type We, [Worksport USA Operations Corporation] certify that the equipment for which authorization is sought through certification is not: • Prohibited from receiving an equipment authorization pursuant to § 2.903; of the FCC rules. • Identified as an equipment type in the “Covered List” NOTE 1 Yours sincerely, Signature: Name: Josh Swanigan Date: 2025.12.19 Title and Company name: Director of Product Management / Worksport USA Operations Corporation. NOTE 1 “Covered List”; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References; 1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the

Worksport USA Operations Corporation 2.911 (d)(5)(ii) Applicant Attestation v1.2 Section 2.911(d)(5)(ii) Certification – Applicant (Covered List ) Company name: Worksport USA Operations Corporation Address: 2500 N America Drive West Seneca, NY 14224 USA Product Name: Worksport COR Hub FCC ID: 2BTQS-WSCOR2000 Model(s): WS-COR-2000 2.911(d)(5)(ii) Applicant filing We, [Worksport USA Operations Corporation] certify that, as of the date of the filing of the application, the applicant is not identified NOTE 1 on the “Covered List” NOTE 2 , established pursuant to § 1.50002 of this chapter, as an entity producing covered communications equipment. Yours sincerely, Signature: Name: Josh Swanigan Date: 2025.12.19 Title and Company name: Director of Product Management / Worksport USA Operations Corporation. NOTE 1 Delete option not applicable to this application. NOTE 2 “Covered List”; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References; 1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the

Worksport USA Operations Corporation 2.911 (d)(7)USA Agent v1.5 Section 2.911(d)(7) USA Agent for Service of Process Company name: Worksport USA Operations Corporation Address: 2500 N America Drive West Seneca, NY 14224 USA Product Name: Worksport COR Hub FCC ID: 2BTQS-WSCOR2000 Model(s): WS-COR-2000 2.911(d)(7) USA Designated Agent for Service of Process We, [ Worksport USA Operations Corporation] (“the applicant”) designate [Worksport USA Operations Corporation] NOTE1 for the purpose of accepting service of process on behalf of the applicant. Applicant consent: We acknowledge our consent to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and email address of the designated agent and acknowledge our acceptance of our obligation to maintain an agent for service of process in the United States for no less than one year after either we the grantee have permanently terminated all marketing and importation of the applicable equipment within the U.S., or at the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. Agent obligation: We acknowledge our obligation to accept service of process in the United States for matters related to the applicable equipment at our physical U.S. address and email address for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or at the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. Worksport USA Operations Corporation 2.911 (d)(7)USA Agent v1.5 USA Agent Company name: Worksport USA Operations Corporation USA Address: 2500 N America Drive West Seneca, NY 14224 USA FRN Number: 0037763331 Contact Name: Josh Swanigan Telephone No: +18885548789 Email: [email protected] Applicant Company name: Worksport USA Operations Corporation Address: 2500 N America Drive West Seneca, NY 14224 USA Grantee FRN Number: 0037763331 FCC Grantee Code: 2BTQS Contact Name: Josh Swanigan Telephone No: +18885548789 Email: [email protected] Signature: Title: Director of Product Management Signature: Title: Director of Product Management Date: 2025.12.19 Date: 2025.12.19 NOTE 1: An applicant located in the United States may designate itself as the agent for service of process. Reference; Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-nation al-security-threats-to-the-communications-supply-chain-through-the

Worksport USA Operations Corporation Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 2025-12-19 Subject; Request for Confidentiality FCC ID: 2BTQS-WSCOR2000 To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description Tune-up Procedure SOFTWARE SECURITY REQUIREMENTS FOR U-NII DEVICES In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s); External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: Josh Swanigan Worksport USA Operations Corporation Title: Director of Product Management

Worksport USA Operations Corporation Agent Authorization Company: Worksport USA Operations Corporation Address: 2500 N America Drive West Seneca, NY 14224 USA Model Number(s): WS-COR-2000 Product Description: Worksport COR Hub We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature: Date: Dec. 17, 2025 Name: Josh Swanigan Title: Director of Product Management Company: Worksport USA Operations Corporation

FCC ID: 2BTQS-WSCOR2000

林秋平 BTZ.0212102 铭牌标签 哑膜 WS主机 20251226 RANGE NOTE TOL LEVEL ANG.Tol± A BC 1° 60°~90° 0.5° 30°~60° L≤10 10＜L≤50 50＜L≤150 150＜L≤300 L＞300 0°~30° 0.05 0.05 0.05 0.10 0.10 0.15 0.15 0.15 0.25 0.25 0.30 0.60 0.800.60 0.40 0.30 0.20 0.20 0.20 0.10 0.2° D 范围 TOL±公差 公差等级 备注 REV. DESCRIPTION A0 A1 A2 版本描述 DOC.NO. PROJECTION 文件编号 MODEL 型号 REV. 版本 DWG.NO. 图纸编号 PART NO. 物料编号 DRAWN 制图 CHECKED 审核 APPROVED 审批 DATE 日期 DATE 日期 DATE 日期 QTY. 用量 SCALE 比例 SHEET 页数 UNIT 单位 P\N. 名称 TYPE 项目类型 MATERIAL 材质 FINISHING 表面处理 视图投影 DRAWING BYDATE 制图日期 1)未标注公差尺寸依照此 公差等级； 2)特殊公差要求依图纸标 注公差。 99.8mm 49.8mm 3mm 3mm 消银龙 哑膜 需过UL认证； 消银龙 T=0.15mm 注：膜内打码 COR�Hubyear+month+dayserial�number：0001~9999 CH202510210001 SN�content:� Fixed QR code C87 M56 Y15 K0 固定的客户二维码 MPPT Input: 12-60VDC 1000W Max (Charging priority is highest) Opera�ng Temperature Range, Charging: 39.2~104°F (4~40°C) Opera�ng Temperature Range, Discharging: 14~104°F (-10~40°C) FCC ID: 2BTQS-WSCOR2000 IC: 34245-WSCOR2000 HVIN: WS-COR-2000 CAUTION: Risk of Electric Shock. Connect only to properly grounded outlets. Risk of Injury To Persons. Do not use this product if the power cord or the ba�ery cables are damaged in any way. This device is not intended for use in a commercial repair facility. WARNING: Do not overcharge the internal ba�ery. See Instruc�on Manual. Do not smoke, strike a match, or cause a spark in the vicinity of the power pack. Only charge the internal ba�ery in a well ven�lated area. DANGER: This device is intended to be used indoors only. Do not use outdoors. MISE EN GARDE: Risque de décharge électrique. Brancher l'unité uniquement à des prises de courant correctement mises à la masse. Risque de blessure aux personnes. Ne pas u�liser ce produit si le cordon d'alimenta�on ou les câbles de ba�erie sont endommagés de quelque façon. Le disposi�f n'est pas des�né à être u�lisé dans un atelier de répara�on commercial. AVERTISSEMENT: Ne pas surcharger la ba�erie interne. Consulter le manuel d'u�lisa�on. Il ne faut pas fumer, allumer une allume�e ou produire des é�ncelles à proximité du bloc d'alimenta�on. Charger la ba�erie uniquement dans un endroit bien aéré. DANGER : Le disposi�f est des�né à être u�lisé à l'intérieur seulement. Ne pas l'u�liser à l'extérieur. Worksport COR Hub Model: WS-COR-2000 Nominal Voltage: 48V Nominal Capacity / Power: 20Ah / 960Wh AC Input: 120VAC, 60Hz, 1000W AC Output (x4): 120VAC 60Hz, 1800W, Total 1800W (Pure Sine Wave) USB-A Output (x4): 5V 3A / 9V 2A / 12V 1.5A, Total 18W Car Power Output: 12VDC 10A Max Type-C PD Output (x2): 5V 3A / 9V 3A / 12V 3A / 15V 3A / 20V 5A, 100W Max,Total 200W AC & DC Output: Total 2138W SN：CH202510210001 Made in China 扫码内容不含“SN：” CONFORMS TO ANSI/CAN/UL STD.2743 5035732

FCC ID: 2BTQS-WSCOR2000

Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn RF Exposure MPE Report Reference No. ..................... : FCC ID............................................. : CTA25110501902 2BTQS-WSCOR2000 Compiled by ( position+printed name+signature) . : File administrators Zoey Cao Supervised by ( position+printed name+signature) . : Project Engineer Ace Chai Approved by ( position+printed name+signature) . : RF Manager Eric Wang Date of issue .................................... : Feb. 02, 2026 Testing Laboratory Name .............. : Shenzhen CTA Testing Technology Co., Ltd. Address ............................................ : Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Applicant’s name ............................ : Worksport USA Operations Corporation Address ............................................ : 2500 N America Drive, West Seneca, NY 14224 USA Standard ........................................... : 47CFR §1.1310 47CFR §2.1091 KDB447498 D01 General RF Exposure Guidance v06 Shenzhen CTA Testing Technology Co., Ltd. All rights reserved. This publication may be reproduced in whole or in part for non-commercial purpses as long as the Shenzhen CTA Testing Technology Co., Ltd. is acknowledged as copyright owner and source of the material. Shenzhen CTA Testing Technology Co., Ltd. takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. Test item description ..................... : Worksport COR Hub Trade Mark ....................................... : Manufacturer .................................... : Worksport USA Operations Corporation Model/Type reference ...................... : WS-COR-2000 Listed Models ................................... : N/A Rating ............................................... : Battery: 48V 20Ah 960Wh AC Input: 120VAC, 60Hz, 1000W AC Output (x4): 120VAC 60Hz, 1800W, Total 1800W (Pure Sine Wave) USB-A Output (x4): 5V3A / 9V2A / 12V1.5A, Total 18W Car Power Output: 12VDC 10A Max Type-C PD Output (x2): 5V3A / 9V3A / 12V3A / 15V 3A / 20V5A 100W Max,Total 200W AC & DC Output: Total 2138W MPPT Input: 12-60VDC 1000W Max (Charging priority is highest) Result ............................................... : PASS Report No.: CTA25110501902 Page 2 of 8 Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn T E S T R E P O R T Equipment under Test : Worksport COR Hub Model /Type : WS-COR-2000 Listed Models : N/A Applicant : Worksport USA Operations Corporation Address : 2500 N America Drive, West Seneca, NY 14224 USA Manufacturer : Worksport USA Operations Corporation Address : 2500 N America Drive, West Seneca, NY 14224 USA Test Result: PASS The test report merely corresponds to the test sample. It is not permitted to copy extracts of these test result without the written permission of the test laboratory. Report No.: CTA25110501902 Page 3 of 8 Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn Contents 1 TEST STANDARDS ............................................................................................................ 4 2 SUMMARY .......................................................................................................................... 5 2.1 General Remarks ..................................................................................................... 5 2.2 Product Description ................................................................................................. 5 2.3 Special Accessories ................................................................................................. 5 2.4 Modifications ............................................................................................................ 5 3 TEST ENVIRONMENT ....................................................................................................... 6 3.1 Address of the test laboratory .................................................................................. 6 3.2 Test Facility .............................................................................................................. 6 3.3 Statement of the measurement uncertainty ............................................................. 6 4 Test limit .............................................................................................................................. 7 4.1 Requirement ............................................................................................................ 7 4.2 MPE Calculation Method ......................................................................................... 7 4.3 Conducted Power Results ....................................................................................... 7 4.4 Manufacturing tolerance .......................................................................................... 8 4.5 Standalone MPE Result ........................................................................................... 8 4.6 Simultaneous Transmission for MPE Result ........................................................... 8 5 Conclusion ........................................................................................................................... 8 Report No.: CT…

Text truncated - open the document above for the full version.

Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn FCC PART 15 SUBPART C TEST REPORT FCC PART 15.247 Report Reference No. ...................: FCC ID. ......................................... : CTA25110501901 2BTQS-WSCOR2000 Compiled by ( position+printed name+signature) : File administrators Zoey Cao Supervised by ( position+printed name+signature) : Project Engineer Ace Chai Approved by ( position+printed name+signature) : RF Manager Eric Wang Date of issue ...................................: Feb. 02, 2026 Testing Laboratory Name .............: Shenzhen CTA Testing Technology Co., Ltd. Address ..........................................: Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Applicant’s name...........................: Worksport USA Operations Corporation Address ...........................................: 2500 N America Drive, West Seneca, NY 14224 USA Test specification ......................... : Standard ..........................................: FCC Part 15.247 Shenzhen CTA Testing Technology Co., Ltd. All rights reserved. This publication may be reproduced in whole or in part for non-commercial purposes as long as the Shenzhen CTA Testing Technology Co., Ltd. is acknowledged as copyright owner and source of the material. Shenzhen CTA Testing Technology Co., Ltd. takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. Equipment description ................ : Worksport COR Hub Trade Mark ......................................: Manufacturer ...................................: Worksport USA Operations Corporation Model/Type reference .....................: WS-COR-2000 Listed Models ..................................: N/A Modulation ......................................: GFSK Frequency .......................................: From 2402MHz to 2480MHz Ratings ............................................: Battery: 48V 20Ah 960Wh AC Input: 120VAC, 60Hz, 1000W AC Output (x4): 120VAC 60Hz, 1800W, Total 1800W (Pure Sine Wave) USB-A Output (x4): 5V3A / 9V2A / 12V1.5A, Total 18W Car Power Output: 12VDC 10A Max Type-C PD Output (x2): 5V3A / 9V3A / 12V3A / 15V 3A / 20V5A 100W Max,Total 200W AC & DC Output: Total 2138W MPPT Input: 12-60VDC 1000W Max (Charging priority is highest) Result ..............................................: PASS Report No.: CTA25110501901 Page 2 of 37 Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn T E S T R E P O R T Equipment under Test : Worksport COR Hub Model /Type : WS-COR-2000 Listed Models : N/A Applicant : Worksport USA Operations Corporation Address : 2500 N America Drive, West Seneca, NY 14224 USA Manufacturer : Worksport USA Operations Corporation Address : 2500 N America Drive, West Seneca, NY 14224 USA Test Result: PASS The test report merely corresponds to the test sample. It is not permitted to copy extracts of these test result without the written permission of the test laboratory. Report No.: CTA25110501901 Page 3 of 37 Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn Contents 1 TEST STANDARDS ...................................................................................................................................... 4 2 SUMMARY .................................................................................................................................................... 5 2.1 General Remarks .............................................................................................................................. 5 2.2 Product Description* .......................................................................................................................... 5 2.3 Equipment Under Test ....................................................................................................................... 5 2.4 Short description of the Equipment under Test (EUT) ...................................................................... 5 2.5 EUT configuration .............................................................................................................................. 5 2.6 EUT operation mode ......................................................................................................................... 6 2.7 Block Diagram of Test Setup ............................................................................................................. 6 2.8 Related Submittal(s) / Grant (s) ......................................................................................................... 6 2.9 Modifications ...................................................................................................................................... 6 3 TEST ENVIRONMENT ................................................................................................................................. 7 3.1 Address of the test laboratory............................................................................................................ 7 3.2 Test Facility ....................................................................................................................................... 7 3.3 Environmental conditions ..............................…

Text truncated - open the document above for the full version.

1 FCC Appendix RF Test Data for BLE FCC ID : 2BTQS-WSCOR2000 Company : Worksport USA Operations Corporation EUT : Worksport COR Hub Model Number : WS-COR-2000 Report No. : CTA25110501901 Reviewed By : Eric Wang 2 Appendix A: DTS Bandwidth Test Result TestMode Antenna Freq[MHz] DTS BW [MHz] FL[MHz] FH[MHz] Limit[MHz] Verdict BLE_1M Ant1 2402 0.688 2401.644 2402.332 0.5 PASS 2440 0.644 2439.672 2440.316 0.5 PASS 2480 0.720 2479.624 2480.344 0.5 PASS BLE_2M Ant1 2402 1.252 2401.332 2402.584 0.5 PASS 2440 1.208 2439.348 2440.556 0.5 PASS 2480 1.148 2479.420 2480.568 0.5 PASS 3 Test Graphs BLE_1M_Ant1_2402 BLE_1M_Ant1_2440 BLE_1M_Ant1_2480 4 BLE_2M_Ant1_2402 BLE_2M_Ant1_2440 BLE_2M_Ant1_2480 5 6 Appendix B: Occupied Channel Bandwidth Test Result TestMode Antenna Freq[MHz] OCB [MHz] FL[MHz] FH[MHz] Limit[MHz] Verdict BLE_1M Ant1 2402 1.0290 2401.475 2402.504 --- --- 2440 1.0263 2439.475 2440.501 --- --- 2480 1.0322 2479.473 2480.506 --- --- BLE_2M Ant1 2402 2.0670 2400.971 2403.038 --- --- 2440 2.0600 2438.973 2441.033 --- --- 2480 2.0592 2478.975 2481.034 --- --- 7 Test Graphs BLE_1M_Ant1_2402 BLE_1M_Ant1_2440 BLE_1M_Ant1_2480 8 BLE_2M_Ant1_2402 BLE_2M_Ant1_2440 BLE_2M_Ant1_2480 9 10 App…

Text truncated - open the document above for the full version.