2BTQY-GT168Two Way Radio

Two Way Radio GT168 Two Way Radio Nanan City Jin Wei Electronics Co.,Ltd. 3/F, Building 1, Unit 2, Optoelectronics-information, Industry Base, Nan'an, Quanzhou, Fujian, China 462.5500-462.7250MHz:32.56dBm 467.5625-467.7125MHz:26.82dBm IMPORTANT NOTICE WARNINGS: Replacement or substitution of transistors, regular diodes or other parts of a unique nature, with parts other than those recommended by HIROYASU may cause a violation of the technical regulations of part 95 of the FCC rules, or violation of type acceptance requirements of part 2 of the rules. Your radio is set up to transmit a regulated signal on an assigned frequency. Any adjustment to your radio must be made by qualified technicians. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1) This device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation. FCC WARNINGS: Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. SAR tests are conducted using standard operating positions accepted by the FCC with the device transmitting at its highest certified power level in all tested frequency bands, although the SAR is determined at the highest certified power level, the actual SAR level of the device while operating can be well below the maximum value. Before a new model is a available for sale to the public, it must be tested and certified to the FCC that it does not exceed the exposure limit established by the FCC. Tests for each product are performed in ÿÿposiÿÿtions and locations as required by the FCC. For body worn operation, this device has been tested and meets the FCC RF exposure guidelines when used with an accessory designated for this product or when used with and accessory that contains no metal. To maintain compliance with the FCC ’s RF exposure guidelines, hold the transmitter and antenna at least 1 inch(2.5 centimeters) from your face and speak in a normal voice, with the antenna pointed up and away from the face. Your wireless hand-held portable transceiver contains a low power transmitter. This product sends out radio frequency (RF) signals when the Push-to-Ta l k (PTT) Button is pressed. The device is authorized to operate at a duty factor not to exceed 50%. Note This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning thee quipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ÿ-----Reorient or relocate the receiving antenna. -----Increase the separation between the equipment and receiver. -----Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ÿ----Consult the dealer or an experienced radio/TV technician for help.

U.S. AGENT LETTER OF ATTESTATION Date: 2026-03-10 FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Ref: Attestation Statements CFR 47 §2.911(d)(7) Filing FCC ID: 2BTQY-GT168 Nanan City Jin Wei Electronics Co.,Ltd. (“the Applicant”) certifies that, as of the date of the filing of the application, Iconsigh is our designated U.S. agent for service of process for the above referenced FCC ID. Nanan City Jin Wei Electronics Co.,Ltd. (“the Applicant”) accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Iconsigh accepts, as of the date of the filing of the application, the obligation of the designated U.S. agent for service of process for the above referenced FCC ID. Designated U.S. Agent Information: Company Name: Iconsigh Address: 2310 Homestead Road, Suite C1, Los Altos, CA, 94024, USA FRN: 0033398652 Tel.: +1 (408) 320-9867 Email: [email protected] Signed by (printed name): Benjamin Kaur Signature: Applicant: Nanan City Jin Wei Electronics Co.,Ltd. 3/F, Building 1, Unit 2, Optoelectronics-information, Industry Base, Nan'an, Quanzhou, Fujian, China FRN: 0037763505 Tel: 18750498890 Email: [email protected] Signed by (printed name): Quanqing Chen Signature:

Nanan City Jin Wei Electronics Co.,Ltd. ADD: 3/F, Building 1, Unit 2, Optoelectronics-information, Industry Base, Nan'an, Quanzhou, Fujian, China TEL: +86 18750498890 FAX: N/A Mail Address: [email protected] Attestation Letter Date: 2026-03-17 FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD21046 Dear Sir or Madam: We, Nanan City Jin Wei Electronics Co.,Ltd. type of Equipment: Two Way Radio, Model name: GT168, AI-168, FCC ID: 2BTQY-GT168 The product only support: FM TX/RX:462.5500-462.7250MHz; 467.5625-467.7125MHz for the purpose of marketing, other frequencies has been shielded by software, the end user has no capability to activate it. Best Regards, Sincerely Yours, Signature: Printed Name: Quanqing Chen Title: Salesperson

Nanan City Jin Wei Electronics Co.,Ltd. ADD: 3/F, Building 1, Unit 2, Optoelectronics-information, Industry Base, Nan'an, Quanzhou, Fujian, China TEL: +86 18750498890 FAX: N/A Mail Address: [email protected] CFR 47 §2.911(d)(5)(i)(ii) Attestation Letter Attestation Letter Date: 2026-03-17 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Ref: Attestation Statements CFR 47 §2.911(d)(5)(i)(ii) Filing FCC ID: 2BTQY-GT168 Nanan City Jin Wei Electronics Co.,Ltd. (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Nanan City Jin Wei Electronics Co.,Ltd. (“the applicant”) certifies that as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Nanan City Jin Wei Electronics Co.,Ltd. (“the applicant”) certifies that the equipment does not use Kaspersky's software information. Sincerely, Signature: Printed Name: Quanqing Chen Title: Salesperson

QA-FR-170-B Nanan City Jin Wei Electronics Co.,Ltd. ADD: 3/F, Building 1, Unit 2, Optoelectronics-information, Industry Base, Nan'an, Quanzhou, Fujian, China TEL: +86 18750498890 FAX: N/A Mail Address: [email protected] FCC Authorization Date: 2026-03-17 FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Agent Authorization To whom it may concern: We , Nanan City Jin Wei Electronics Co.,Ltd., Hereby authorizes Bay Area Compliance Laboratories Corp. (Xiamen) to act on its behalf in all matters relating to application for Equipment authorization, including the signing of all documents relating to these matters. All acts carried out by Bay Area Compliance Laboratories Corp. (Xiamen) on our behalf shall have the same effect as our own action. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. This authorization is valid until further written notice from the applicant. Sincerely Yours, Client’s signature: Printed Name: Quanqing Chen Title: Salesperson

QA-FR-171-A Nanan City Jin Wei Electronics Co.,Ltd. ADD: 3/F, Building 1, Unit 2, Optoelectronics-information, Industry Base, Nan'an, Quanzhou, Fujian, China TEL: +86 18750498890 FAX: N/A E-mail: [email protected] FCC Confidential Authorization Date: 2026-03-17 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Confidentiality Request regarding application for certification of FCC ID: 2BTQY-GT168 In accordance with Sections 0.457 and 0.459 of the Commission’s Rules, Nanan City Jin Wei Electronics Co.,Ltd. hereby requests long-term confidential treatment of information accompanying this application as outlined below: • Block Diagram • Schematics • Operation Description • BOM • Tune Up Procedure The above materials contain proprietary and confidential information not customarily released to the public. The public disclosure of these materials provides unjustified benefits to its competitors in the market. Sincerely, Signature: Printed Name: Quanqing Chen Title: Salesperson

Nanan City Jin Wei Electronics Co.,Ltd. ADD: 3/F, Building 1, Unit 2, Optoelectronics-information, Industry Base, Nan'an, Quanzhou, Fujian, China TEL: +86 18750498890 FAX: N/A Mail Address: [email protected] DECLARATION OF SIMILARITY Date: 2025-12-12 FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Dear Sir or Madam: We, Nanan City Jin Wei Electronics Co.,Ltd., hereby declare that the product: Two Way Radio, FCC ID: 2BTQY-GT168. Model: AI-168 are electrically identical with the model: GT168 which was tested by Bay Area Compliance Laboratories Corp. (Xiamen) with the same electromagnetic emissions and electromagnetic compatibility characteristics. A description of the differences between those models and that are declared similar are as follows: They are the same product, but need to be sold to different customers and e-commerce platforms, so there are differences in product models and trade name(GT168 trade name: HJT, AI-168 trade name: AIRITON). Please contact me should there be need for any additional clarification or information. Best Regards, Signature: Printed Name: Quanqing Chen Title: Salesperson

Bay Area Compliance Laboratories Corp. (Xiamen) Report No.: 2507A28837E-RF-EXP Page 1 / 8 EUT EXTERNAL PHOTOS GT168 GT168 AI-168 Bay Area Compliance Laboratories Corp. (Xiamen) Report No.: 2507A28837E-RF-EXP Page 2 / 8 Bay Area Compliance Laboratories Corp. (Xiamen) Report No.: 2507A28837E-RF-EXP Page 3 / 8 Bay Area Compliance Laboratories Corp. (Xiamen) Report No.: 2507A28837E-RF-EXP Page 4 / 8 AI-168 Bay Area Compliance Laboratories Corp. (Xiamen) Report No.: 2507A28837E-RF-EXP Page 5 / 8 Bay Area Compliance Laboratories Corp. (Xiamen) Report No.: 2507A28837E-RF-EXP Page 6 / 8 Bay Area Compliance Laboratories Corp. (Xiamen) Report No.: 2507A28837E-RF-EXP Page 7 / 8 Bay Area Compliance Laboratories Corp. (Xiamen) Report No.: 2507A28837E-RF-EXP Page 8 / 8

Bay Area Compliance Laboratories Corp. (Xiamen) Report No.: 2507A28837E-RF-INP Page 1 / 4 EUT INTERNAL PHOTOS Bay Area Compliance Laboratories Corp. (Xiamen) Report No.: 2507A28837E-RF-INP Page 2 / 4 Bay Area Compliance Laboratories Corp. (Xiamen) Report No.: 2507A28837E-RF-INP Page 3 / 4 Spring Antenna Bay Area Compliance Laboratories Corp. (Xiamen) Report No.: 2507A28837E-RF-INP Page 4 / 4

SAR TEST REPORT Applicant: Nanan City Jin Wei Electronics Co.,Ltd. Address: 3/F, Building 1, Unit 2, Optoelectronics-information, Industry Base, Nan'an, Quanzhou, Fujian, China FCC ID: 2BTQY-GT168 Product Name: Two Way Radio Standard(s): 47 CFR Part 2(2.1093) The above device has been tested and found compliant with the requirement of the relative standards by China Certification ICT Co., Ltd (Dongguan) Report Number: 2503A28837E-20 Date Of Issue: 2026/03/05 Reviewed By: Ken Zong Title: SAR Tester Approved By: Karl Gong Title:SAR Test Supervisor Test Laboratory: China Certification ICT Co., Ltd (Dongguan) Room 101 & 201, Building 2, 256 Pingdong Road, Dalang Town, Dongguan City, Guangdong,China Tel:+86-769-83085888 www.ccttt.com.cn China Certification ICT Co., Ltd (Dongguan) Report No.: 2503A28837E-20 Report Template: RF-FCC SAR-A/0 Page 2 of 52 SAR TEST RESULTS SUMMARY Operation Frequency Bands Highest Reported 1g SAR (W/kg) Limits (W/kg) Head Face Up (Gap 25mm) Body-Worn (Gap 0mm) PTT(462.55-467.7125MHz) 0.29 0.56 1.6 Maximum Simultaneous Transmission SAR Items Head Face Up (Gap 25mm) Body-Worn (Gap 0mm) Limits (W/kg) Sum SAR(W/kg) N/A N/A 1.6 EUT Received Date: 2025/12/16 Tested Date: 2025/12/27 Tested Result: Pass China Certification ICT Co., Ltd (Dongguan) Report No.: 2503A28837E-20 Report Template: RF-FCC SAR-A/0 Page 3 of 52 Test Facility The Test site used by China Certification ICT Co., Ltd (Dongguan) to collect test data is located on the Room 101 & 201, Building 2, 256 Pingdong Road, Dalang Town, Dongguan City, Guangdong, China . The lab has been recognized as the FCC accredited lab under the KDB 974614 D01 and is listed in the FCC Public Access Link (PAL) database, FCC Registration No. : 442868, the FCC Designation No. : CN1314. Declarations China Certification ICT Co., Ltd (Dongguan) is not responsible for the authenticity of any test data provided by the applicant. Data included from the applicant that may affect test results are marked with a triangle symbol “▲”. Customer model name, addresses, names, trademarks etc. are not considered data. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This report cannot be reproduced except in full, without prior written approval of the Company. This report is valid only with a valid digital signature. The digital signature may be available only under the Adobe software above version 7.0. This report may contain data that are not covered by the accreditation scope and shall be marked with an as ★terisk “ ”. Each test item follows the test standard(s) without deviation. China Certification ICT Co., Ltd (Dongguan) Report No.: 2503A28837E-20 Report Template: RF-FCC SAR-A/0 Page 4 of 52 CONTENTS SAR TEST RESULTS SUMMARY .............................................................................................. 2 DOCUMENT REVISION HISTORY .......................................................................................... 6 1. GENERAL INFORMATION .................................................................................................... 7 1.1 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT) ....................................................... 7 1.2 TEST SPECIFICATION, METHODS AND PROCEDURES ........................................................................ 8 1.3 SAR LIMITS .......................................................................................................................................... 9 2. SAR MEASUREMENT SYSTEM .......................................................................................... 10 3. EQUIPMENT LIST AND CALIBRATION .......................................................................... 17 3.1 EQUIPMENTS LIST & CALIBRATION INFORMATION ....................................................................... 17 4. SAR MEASUREMENT SYSTEM VERIFICATION ........................................................... 18 4.1 LIQUID VERIFICATION ...................................................................................................................... 18 4.2 SYSTEM ACCURACY VERIFICATION ................................................................................................. 19 4.3 SAR SYSTEM VALIDATION DATA ............................................................................................. 20 5. EUT TEST STRATEGY AND METHODOLOGY .............................................................. 21 5.1 TEST POSITIONS FOR FRONT-OF-FACE CONFIGURATIONS .............................................................. 2 1 5.2 TEST POSITIONS FOR BODY-WORN AND OTHER CONFIGURATIONS ................................................ 21 5.3 TEST DISTANCE FOR SAR EVALUATION .......................................................................................... 22 5.4 SAR EVALUATION PROCEDURE ....................................................................................................... 23 6. CONDUCTED OUTPUT POWER MEASUREMENT ........................................................ 24 6.1 TEST PROCEDURE .............................................................................................................................. 24 6.2 MAXIMUM TARGET OUTPUT POWER ............................................................................................... 24 6.4 TEST RESULTS: .................................................................................................................................. 24 7. SAR MEASUREMENT RESULTS ........................................................................................ 26 7.1 SAR TEST DATA ................................................................................................................................ 26 8. Measurement Variability ......................................................................................................... 27 9. DUT HOLDER PERTURBATIONS ...........................................................................…

Text truncated - open the document above for the full version.

FCC Part 95 Page 1 of 39 FCC PART 95 TEST REPORT For Nanan City Jin Wei Electronics Co.,Ltd. 3/F, Building 1, Unit 2, Optoelectronics-information, Industry Base, Nan’an, Quanzhou, Fujian, China Report Type: Original Report Product Name: Two Way Radio Report Number: 2507A28837E-RF-01 Report Date: 2026-01-28 Reviewed By: Ash Lin Approved By: Miles Chen Prepared By : Bay Area Compliance Laboratories Corp. (Xiamen) Unit 102, No. 902 Meifeng South Road, Binhai West Avenue, Science and Technology Innovation Park, Torch High tech Zone XiaMen Tel: +86-592-3200111 www.baclcorp.com.cn FCC ID: 2BTQY-GT168 Bay Area Compliance Laboratories Corp. (Xiamen) Report No.: 2507A28837E-RF-01 FCC Part 95 Page 2 of 39 TABLE OF CONTENTS REPORT REVISION HISTORY ................................................................................................................................ 4 GENERAL INFORMATION ....................................................................................................................................... 5 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT) ..................................................................................... 5 ★ANTENNA INFORMATION ......................................................................................................................................... 5 OBJECTIVE ................................................................................................................................................................... 5 TEST METHODOLOGY .................................................................................................................................................. 6 MEASUREMENT UNCERTAINTY .................................................................................................................................... 6 TEST FACILITY ............................................................................................................................................................. 6 SYSTEM TEST CONFIGURATION .......................................................................................................................... 7 TEST MODE AND VOLTAGE .......................................................................................................................................... 7 DESCRIPTION OF TEST CONFIGURATION ...................................................................................................................... 7 EQUIPMENT MODIFICATIONS ....................................................................................................................................... 7 SUPPORT EQUIPMENT LIST AND DETAILS .................................................................................................................... 7 EXTERNAL I/O CABLE .................................................................................................................................................. 8 BLOCK DIAGRAM OF TEST SETUP ................................................................................................................................ 8 SUMMARY OF TEST RESULTS ............................................................................................................................. 10 TEST EQUIPMENT LIST ......................................................................................................................................... 11 FCC §2.1046, §95.567 – FRS TRANSMIT POWER ................................................................................................ 12 APPLICABLE STANDARD ............................................................................................................................................ 12 EUT SETUP BLOCK DIAGRAM ................................................................................................................................... 12 TEST PROCEDURE ...................................................................................................................................................... 12 TEST DATA ................................................................................................................................................................ 13 FCC §2.1047, §95.575 – FRS MODULATION LIMITS .......................................................................................... 15 APPLICABLE STANDARD ............................................................................................................................................ 15 TEST SETUP BLOCK DIAGRAM ................................................................................................................................... 15 TEST PROCEDURE ...................................................................................................................................................... 15 TEST DATA ................................................................................................................................................................ 16 FCC §2.1049, §95.573, §95.579 - AUTHOURIZED BANDWIDTH AND EMISSION MASK ............................ 23 APPLICABLE STANDARD ............................................................................................................................................ 23 EUT SETUP BLOCK DIAGRAM ................................................................................................................................... 23 TEST PROCEDURE ...................................................................................................................................................... 24 TEST DATA ................................................................................................................................................................ 25 FCC §2.1053 & §95.579 - RADIATED SPURIOUS EMISSION ............................................................................ 28 APPLICABLE STANDARD ............................…

Text truncated - open the document above for the full version.

Antenna model: GT168 Company Name: Nanan City Jin Wei Electronics Co.,Ltd. Address: 3/F, Building 1, Unit 2, Optoelectronics-information, Industry Base, Nan'an, Quanzhou, Fujian, China 电气参数 ELECTRICAL SPECIFICATIONS 频率 462.5500-467.7125MHz Frequency 输入阻抗 50Ω Impedance 驻波比 ＜1.5（Midpoint） VSWR 增益 2.15dBi Gain 极化方式 垂直 Vertical Polarization 辐射方向 全向 Omni Radiation 避雷保护 直流接地 Lighting Protection Direct Ground 功率容量 5 W Maximum Power Input-watts 机械特性 MECHANICAL SPECIFICATIONS 天线长度 34±2mm Height 接头 SMA.K Termination 外罩材料 ABS Radome Material 天线罩颜色 黑色 Radome Color Black Antenna type Spring 467.7125MHz

Bay Area Compliance Laboratories Corp. (Xiamen) Report No.: 2507A28837E-RF-TSP Page 1 / 2 EUT SETUP PHOTOS RSE - Front View (Below 1 GHz) RSE - Back View (Below 1 GHz) Bay Area Compliance Laboratories Corp. (Xiamen) Report No.: 2507A28837E-RF-TSP Page 2 / 2 RSE - Front View (Above 1 GHz) RSE - Back View (Above 1 GHz)