
Text extracted from the exhibit documents filed with the FCC. Open a document above to read the original.
Orator FCC Warning This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
Attestation Statements (2026.01.19) TO: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046, USA RE: Attestation Statements Part 2.911(d)(7) request for (FCC ID: 2BTTZ-ORATOR) (Nanchang si colordisplay Technology Co., Ltd.), the undersigned, hereby authorize (AOGES CO., LIMITED) to act as our designated U.S. agent for service of process, (Nanchang si colordisplay Technology Co., Ltd.) accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. (AOGES CO., LIMITED) accepts the responsibility to act as designated U.S. agent for service of process. Applicant Information: Company name: Nanchang si colordisplay Technology Co., Ltd. Contact Name: JING GUO Address: 679 Aixihu North Road, High tech Industrial Development Zone, Nanchang City, Jiangxi Province,China Telephone No: 17821849381 Email: [email protected] Signature U.S. Agent Information: Company Name: AOGES CO., LIMITED Contact Name: XIAOYAN LAI Address: 1624 Market St., Ste 226, #30327 Denver CO, 80202 US Telephone No: +1 303 623 1940 Email: [email protected] FRN: 0033947847 Signature
Nanchang si colordisplay Technology Co., Ltd. (2026.01.19) Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: Attestation Statements Part 2.911(d)(5)(i) request for(FCC ID: 2BTTZ-ORATOR) [Nanchang si colordisplay Technology Co., Ltd.] (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. We also certify that, as of the date of the filing of the application, the equipment does not utilize cyber-security or anti-virus software from Kaspersky Lab, Inc, or any of its successors and assignees, which is also on the “covered list”. Sincerely, Signature: Date: 2026.01.19 Name: Jiankuai Li Title: PM Company: Shenzhen STS Test Services Co., Ltd. Nanchang si colordisplay Technology Co., Ltd. (2026.01.19) Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: Attestation Statements Part 2.911(d)(5)(ii) request for(FCC ID: 2BTTZ-ORATOR) [Nanchang si colordisplay Technology Co., Ltd.] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Sincerely, Signature: Date: 2026.01.19 Name: Jiankuai Li Title: PM Company: Shenzhen STS Test Services Co., Ltd.
Nanchang si colordisplay Technology Co., Ltd. 2026.01.19 Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: CONFIDENTIALITY REQUEST FOR (Visel Glasses / Orator / FCC ID: 2BTTZ-ORATOR) To Whom It May Concern: This letter serves as an official request for confidentiality under sections 0.457 and 0.459 of CFR 47. We have requested that the • Schematics • Block diagram • Operation description required to be submitted with this application be permanently withheld from public review. These materials contain trade secrets and proprietary information and are not customarily released to the public. The public disclosure of this information might be harmful to the company and provide unjustified benefits to our competitors. Please contact me if there is any information you may need. Sincerely, Signature: Date: 2026.01.19 Name: Jiankuai Li Title: PM Company: Shenzhen STS Test Services Co., Ltd.
Nanchang si colordisplay Technology Co., Ltd. 2026.01.19 Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: LETTER OF AGENT AUTHORIZATION To Whom It May Concern: We, the undersigned, hereby authorize (Shenzhen STS Test Services Co., Ltd.) to act on our behalf in all matters relating to application for equipment authorization, including the signing of all documents relating to these matters. We also hereby certify that no party to the application authorized hereunder is subject to the denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C.853(a). This agreement expires one year from the current date. Sincerely, Signature: Date: 2026.01.19 Name: JING GUO Title: Product Director Company: Nanchang si colordisplay Technology Co., Ltd.
Page 1 of 4 Report No.: STS2512234 APPENDIX-PHOTOGRAPHS OF EUT CONSTRUCTIONAL DETAILS Model: Orator Photo 1 Photo 2 Page 2 of 4 Report No.: STS2512234 Photo 3 Photo 4 Page 3 of 4 Report No.: STS2512234 Photo 5 Photo 6 Page 4 of 4 Report No.: STS2512234 Photo 7
FCC Label 0.5CM*2CM FCC ID: 2BTTZ-ORATOR
Page 1 of 4 Report No.: STS2512234 APPENDIX-PHOTOGRAPHS OF EUT CONSTRUCTIONAL DETAILS Model: Orator Photo 1 Photo 2 BT Antenna A BT Antenna B Page 2 of 4 Report No.: STS2512234 Photo 3 Photo 4 Page 3 of 4 Report No.: STS2512234 Photo 5 Photo 6 Page 4 of 4 Report No.: STS2512234 Photo 7 Photo 8
The test results presented in this report relate only to the object tested. This report shall not be reproduced, except in full, without the written approval of the ShenZhen STS Test Services Co., Ltd. MPE Report Report No.:STS2511234H01 Issued for Nanchang si colordisplay Technology Co., Ltd. 679 Aixihu North Road, High tech Industrial Development Zone, Nanchang City, Jiangxi Province Product Name: Visel Glasses Brand Name: VISEL Model Name: Orator Series Model(s): N/A FCC ID: 2BTTZ-ORATOR Test Standards: FCC 47CFR §2.1093 Page 2 of 9 Report No.: STS2511234H01 TEST REPORT Applicant’s Name ................. : Nanchang si colordisplay Technology Co., Ltd. Address ................................. : 679 Aixihu North Road, High tech Industrial Development Zone, Nanchang City, Jiangxi Province Manufacturer's Name ........... : Nanchang si colordisplay Technology Co., Ltd. Address ................................. : 679 Aixihu North Road, High tech Industrial Development Zone, Nanchang City, Jiangxi Province Product Description Product Name ........................ : Visel Glasses Brand Name .......................... : VISEL Model Name .......................... : Orator Series Model(s) ...................... : N/A Test Standards ..................... : FCC 47CFR §2.1093 447498 D04 Interim General RF Exposure Guidance v01 The test results presented in this report relate only to the object tested. This report shall not be reproduced, except in full, without the written approval of the ShenZhen STS Test Services Co., Ltd. Date of Test ........................................... : Date of receipt of test item ...................... : 27 Nov. 2025 Date (s) of performance of tests ............. : 27 Nov. 2025 ~ 22 Dec. 2025 Date of Issue .......................................... : 22 Dec. 2025 Test Result .............................................. : Pass Testing Engineer : (Aaron Bu) Technical Manager : (Skylar Li) Authorized Signatory : (Bovey Yang) Page 3 of 9 Report No.: STS2511234H01 TABLE OF CONTENTS 1. GENERAL INFORMATION 5 1.1 GENERAL DESCRIPTION OF THE EUT 5 1.2 TEST FACTORY 5 2. FCC 47CFR §2.1093 REQUIREMENT 6 2.1 TEST STANDARDS 6 2.2 LIMIT 6 2.3 TEST RESULT 9 Page 4 of 9 Report No.: STS2511234H01 Revision History Rev. Issue Date Report No. Effect Page Contents 00 22 Dec. 2025 STS2511234H01 ALL Initial Issue Page 5 of 9 Report No.: STS2511234H01 1. GENERAL INFORMATION 1.1 GENERAL DESCRIPTION OF THE EUT Product Name Visel Glasses Brand Name VISEL Model Name Orator Series Model(s) N/A Model Difference N/A Product Description The EUT is Visel Glasses Operation Frequency: 2402 – 2480 MHz Modulation Type: GFSK Antenna gain: Antenna a:1.24dBi Antenna b:0.12dBi Antenna Designation: FPC Power Rating Input: 5V/1A Adapter N/A Battery Model: 551130 Brand: WEL Rated Voltage: 3.87 V Charge Limit Voltage: 5 V Capacity: 185 mAh Hardware Version XC_Main_V4 Software Version V1.0.6 1.2 TEST FACTORY SHENZHEN STS TEST SERVICES CO., LTD Add. : 101, Building B, Zhuoke Science Park, No.190 Chongqing Road, ZhanChengShequ, Fuhai Sub-District, Bao’an District, Shenzhen, Guang Dong, China FCC test Firm Registration Number: 625569 IC test Firm Registration Number: 12108A A2LA Certificate No.: 4338.01 Page 6 of 9 Report No.: STS2511234H01 2. FCC 47CFR §2.1093 REQUIREMENT 2.1 TEST STANDARDS Follow the maximum permissible exposure (MPE) limits specified in 447498 D04 Interim General Radio Frequency Exposure Guidelines v01. The gain of the antenna used in the product was extracted from the supplied antenna data sheet and the maximum total power input to the antenna was also measured. Calculate the distance from the product to the MPE limit by the formula. 2.2 LIMIT For single RF sources (i.e., any single fixed RF source, mobile device, or portable device, as defined in paragraph (b)(2) of this section): A single RF source is exempt if: (A) The available maximum time-averaged power is no more than 1 mW, regardless of separation distance. This exemption may not be used in conjunction with other exemption criteria other than those in paragraph (b)(3)(ii)(A) of Part 1.1307. Medical implant devices may only use this exemption and that in paragraph (b)(3)(ii)(A); (B) Or the available maximum time-averaged power or effective radiated power (ERP), whichever is greater, is less than or equal to the threshold Pth (mW) described in the following formula. This method shall only be used at separation distances (cm) from 0.5 centimeters to 40 centimeters and at frequencies from 0.3 GHz to 6 GHz (inclusive). Pth is given by: Page 7 of 9 Report No.: STS2511234H01 (C) Or using below table and the minimum separation distance (R in meters) from the body of a nearby person for the frequency (f in MHz) at which the source operates, the ERP (watts) is no more than the calculated value prescribed for that frequency. For the exemption in Table 1 to apply, R must be at least λ/2π, where λ is the free-space operating wavelength in meters. If the ERP of a single RF source is not easily obtained, then the available maximum time-averaged power may be used in lieu of ERP if the physical dimensions of the radiating structure(s) do not exceed the electrical length of λ/4 or if the antenna gain is less than that of a half-wave dipole (1.64 linear value). RF Source frequency (MHz) Threshold ERP(watts) 0.3-1.34 1,920 R 2 . 1.34-30 3,450 R 2 /f 2 . 30-300 3.83 R 2 . 300-1,500 0.0128 R 2 f. 1,500-100,000 19.2R 2 . Page 8 of 9 Report No.: STS2511234H01 For multiple RF sources: Multiple RF sources are exempt if: (A) The available maximum time-averaged power of each source is no more than 1 mW and there is a separation distance of two centimeters between any portion of a radiating structure operating and the nearest portion of any other radiating structure in the same device, except if the sum of multiple sources is less than 1 mW during the time-averaging period, in which case they may be treated as a single source (separation is not required). This ex…
Text truncated - open the document above for the full version.
Project: Remotecontrol Writedby: Zhang_haidong Remotecontrol-antenna SpecificationforApproval Date::20251119 RevisionSupervisedby: LIpeng Mould CONFIDENTIAL Brotone.com Page -1- Thisacknowledgementisfordebuggingthegoldenmachinedata,andisonly responsibleforthegoldenmachine.Itissuggestedthatyourcompanykeeponegolden machineinour.Weguaranteetheantennaperformanceofthesamemassproduction machinewiththesamematerialsandsoftwareasthegoldenmachine. SampleCertificate SPECIFICATIONFORAPPROVAL Customer: NanchangXincai Specification: Remotecontrol Ourcompany's materialnumber CustomerP/N:P/N: DateOfIssue : 2025.11.19 : SampleSubmissionCategory Structuralsample Colorgradientsample Appearancelimitsample Internalcompanyapproval :( signature) ( Approved )( Checked )( Prepared ) ( CustomerApproval) □ PASS □ Waive □ Reject R&DQuality ID DateOfApproval:2025.11.19 Companyname:ShenzhenXinlingkeTechnologyCo.,Ltd. Address:BuildingNo.5,5thFloor,OfficeBuilding,NorthDistrict,High-techIndustrialPark,NanshanDistrict,Shenzhen Project: Remotecontrol Writedby: Zhang_haidong Remotecontrol-antenna SpecificationforApproval Date::20251119 RevisionSupervisedby: LIpeng Mould CONFIDENTIAL Brotone.com Page -2- Summary ThisreportdescribesthecharacteristicsofantennafortheChenZhan byShenzhenxinlingkeTechnologyCo.,Ltd.Thephabletmodelis Remote control andtherangeoffrequencyisfrequency/BT,TheAntenna gain:BT:1.24dbi,TheantennamodelisPIFAandlocatedinsidethehandset. 1.1Matchcircuit Nochange. 2ConfiguringsettingsZ TXPowerandRXSensitivityThedataofTXPowerandRx Sensitivityis3Dresultmeasuredinmicrowaveeanechoicchamber bytheAgilent8960. 3.1TRP、TIS Antennapassivedata Project: Remotecontrol Writedby: Zhang_haidong Remotecontrol-antenna SpecificationforApproval Date::20251119 RevisionSupervisedby: LIpeng Mould CONFIDENTIAL Brotone.com Page -3- Project: Remotecontrol Writedby: Zhang_haidong Remotecontrol-antenna SpecificationforApproval Date::20251119 RevisionSupervisedby: LIpeng Mould CONFIDENTIAL Brotone.com Page -4- 6.AntennatestedReportwithalldimension SaltFogTestReport Handset Model Remotecontrol Tested Quantity 5PCS StandardGB2423.18 Product material FPC Tested Items Required Standard Actual value Result Tested Items Required Standard Actua l value Resul t Tester Model KD-60KD-60OK Tested Period 24H24HOK SaltFog TestType NSS Neutral NSS NSS Neutral NSS OK SaltFog Box Temperatur e 35°C35°COK SaltPH6.5-7.26.8OK amountof precipitat ionof Saltfog 1-2ml1.8mlOK Project: Remotecontrol Writedby: Zhang_haidong Remotecontrol-antenna SpecificationforApproval Date::20251119 RevisionSupervisedby: LIpeng Mould CONFIDENTIAL Brotone.com Page -5- (H.80C) Fogspit type Continue dfog Continu edfog OKMaterialFPCFPCOK Volumeof salt 5%/NaCL5%/NaCLOK Compressed air pressure 1±0.1KG/CM 2 1OK saturated temperature 47°C47°COK Sample location angel 90°90°OK Observed Period Observedphenomenon 4HNA 12HNA 24HNA JudgedStandard:JudgedbythemethodofGB5944-86,overLevel9isqualified. FinalTested Result Qualified√Unqualified TestedbyBenyuanHe Supervi sedby AibingWangApprovedby Remark:normalsaltfogtestedmethodsisNSS,AASSandCASS. 7.ShipmentMode MaterialTypePackageMode FPC1、fullpagepackageforshipment 2、Releasepaper+PETplasticsbags packed 3、100sheets/bag
The test results presented in this report relate only to the object tested. This report shall not be reproduced, except in full, without the written approval of the Shenzhen STS Test Services Co., Ltd. Radio Test Report Report No.:STS2511234W01 Issued for Nanchang si colordisplay Technology Co., Ltd. 679 Aixihu North Road, High tech Industrial Development Zone, Nanchang City, Jiangxi Province Product Name: Visel Glasses Brand Name: VISEL Model Name: Orator Series Model(s): N/A FCC ID: 2BTTZ-ORATOR Test Standards: FCC Part15.247 Page 2 of 51 Report No.: STS2511234W01 TEST REPORT Applicant’s Name ................. : Nanchang si colordisplay Technology Co., Ltd. Address ................................. : 679 Aixihu North Road, High tech Industrial Development Zone, Nanchang City, Jiangxi Province Manufacturer's Name .......... : Nanchang si colordisplay Technology Co., Ltd. Address ................................. : 679 Aixihu North Road, High tech Industrial Development Zone, Nanchang City, Jiangxi Province Product Description Product Name ....................... : Visel Glasses Brand Name .......................... : VISEL Model Name .......................... : Orator Series Model(s) .................... : N/A Standards ............................. : FCC Part15.247 Test Procedure ...................... : ANSI C63.10-2020 This device described above has been tested by STS, the test results show that the equipment under test (EUT) is in compliance with the FCC requirements. And it is applicable only to the tested sample identified in the report. The test results presented in this report relate only to the object tested. This report shall not be reproduced, except in full, without the written approval of the Shenzhen STS Test Services Co., Ltd. Date of Test ........................................... : Date of receipt of test item ..................... : 27 Nov. 2025 Date (s) of performance of tests ............. : 27 Nov. 2025 ~ 22 Dec. 2025 Date of Issue .......................................... : 22 Dec. 2025 Test Result.............................................. : Pass Testing Engineer : (Aaron Bu) Technical Manager : (Skylar Li) Authorized Signatory : (Bovey Yang) Page 3 of 51 Report No.: STS2511234W01 Table of Contents Page 1. SUMMARY OF TEST RESULTS 6 1.1 TEST FACTORY 7 1.2 MEASUREMENT UNCERTAINTY 7 2. GENERAL INFORMATION 8 2.1 GENERAL DESCRIPTION OF THE EUT 8 2.2 DESCRIPTION OF THE TEST MODES 9 2.3 TEST SOFTWARE AND POWER LEVEL 10 2.4 BLOCK DIAGRAM SHOWING THE CONFIGURATION OF SYSTEM TESTED 10 2.5 DESCRIPTION OF NECESSARY ACCESSORIES AND SUPPORT UNITS 11 2.6 EQUIPMENTS LIST 12 3. EMC EMISSION TEST 13 3.1 CONDUCTED EMISSION MEASUREMENT 13 3.2 TEST PROCEDURE 14 3.3 TEST SETUP 14 3.4 EUT OPERATING CONDITIONS 14 3.5 TEST RESULTS 15 4. RADIATED EMISSION MEASUREMENT 17 4.1 RADIATED EMISSION LIMITS 17 4.2 TEST PROCEDURE 19 4.3 TEST SETUP 20 4.4 EUT OPERATING CONDITIONS 20 4.5 FIELD STRENGTH CALCULATION 21 4.6 TEST RESULTS 22 5. CONDUCTED SPURIOUS & BAND EDGE EMISSION 29 5.1 LIMIT 29 5.2 TEST PROCEDURE 29 5.3 TEST SETUP 29 5.4 EUT OPERATION CONDITIONS 29 5.5 TEST RESULTS 29 6. POWER SPECTRAL DENSITY TEST 30 6.1 LIMIT 30 6.2 TEST PROCEDURE 30 6.3 TEST SETUP 30 Page 4 of 51 Report No.: STS2511234W01 Table of Contents Page 6.4 EUT OPERATION CONDITIONS 30 6.5 TEST RESULTS 30 7. BANDWIDTH TEST 31 7.1 LIMIT 31 7.2 TEST PROCEDURE 31 7.3 TEST SETUP 31 7.4 EUT OPERATION CONDITIONS 31 7.5 TEST RESULTS 31 8. PEAK OUTPUT POWER TEST 32 8.1 LIMIT 32 8.2 TEST PROCEDURE 32 8.3 TEST SETUP 33 8.4 EUT OPERATION CONDITIONS 33 8.5 TEST RESULTS 33 9. ANTENNA REQUIREMENT 34 9.1 STANDARD REQUIREMENT 34 9.2 EUT ANTENNA 34 APPENDIX 1-TEST DATA 35 MAXIMUM PEAK CONDUCTED OUTPUT POWER 35 -6DB BANDWIDTH 38 MAXIMUM POWER SPECTRAL DENSITY LEVEL 41 BAND EDGE 44 CONDUCTED RF SPURIOUS EMISSION 47 APPENDIX 2- EUT TEST PHOTO 51 Page 5 of 51 Report No.: STS2511234W01 Revision History Rev. Issue Date Report No. Effect Page Contents 00 22 Dec. 2025 STS2511234W01 ALL Initial Issue Page 6 of 51 Report No.: STS2511234W01 1. SUMMARY OF TEST RESULTS Test procedures according to the technical standards: KDB 558074 D01 15.247 Meas Guidance v05r02. FCC Part 15.247,Subpart C Standard Section Test Item Judgment Remark 15.207 Conducted Emission PASS -- 15.247 (a)(2) 6dB Bandwidth PASS -- 15.247 (b)(3) Output Power PASS -- 15.209 Radiated Spurious Emission PASS -- 15.247 (d) Conducted Spurious & Band Edge Emission PASS -- 15.247 (e) Power Spectral Density PASS -- 15.205 Restricted bands of operation PASS -- Part 15.247(d)/ Part 15.209(a) Band Edge Emission PASS -- 15.203 Antenna Requirement PASS -- Note: (1) ‘N/A’ denotes test is not applicable in this Test Report. (2) All tests are according to ANSI C63.10-2020. Page 7 of 51 Report No.: STS2511234W01 1.1 TEST FACTORY SHENZHEN STS TEST SERVICES CO., LTD Add. : 101, Building B, Zhuoke Science Park, No.190 Chongqing Road, ZhanChengShequ, Fuhai Sub-District, Bao’an District, Shenzhen, Guang Dong, China FCC test Firm Registration Number: 625569 IC test Firm Registration Number: 12108A A2LA Certificate No.: 4338.01 1.2 MEASUREMENT UNCERTAINTY The reported uncertainty of measurement y ± U, where expended uncertainty U is based on a standard uncertainty multiplied by a coverage factor of k=2, providing a level of confidence of approximately 95 %. No. Item Uncertainty 1 RF output power, conducted ±0.751dB 2 Unwanted Emissions, conducted ±2.888dB 3 All emissions, radiated 9K-30MHz ±2.48dB 4 All emissions, radiated 30M-1GHz ±2.52dB 5 All emissions, radiated 1G-18GHz ±3.48dB 6 All emissions, radiated>18GHz ±4.18dB 7 Conducted Emission (9KHz-150KHz) ±2.48dB 8 Conducted Emission (150KHz-30MHz) ±2.52dB 9 Occupied Channel Bandwidth ±3.6% 10 Power Spectral Density, conducted ±1.214dB 11 Duty Cycle ±3.2% Page 8 of 51 Report No.: STS2511234W01 2. GENERAL INFORMATION 2.1 GENERAL DESCRIPTION OF THE EUT Product Name Visel Glasses Brand Name VISEL Model Name Orator Series Model(s) N/A Model Difference N/A …
Text truncated - open the document above for the full version.
The test results presented in this report relate only to the object tested. This report shall not be reproduced, except in full, without the written approval of the Shenzhen STS Test Services Co., Ltd. Radio Test Report Report No.:STS2511234W02 Issued for Nanchang si colordisplay Technology Co., Ltd. 679 Aixihu North Road, High tech Industrial Development Zone, Nanchang City, Jiangxi Province Product Name: Visel Glasses Brand Name: VISEL Model Name: Orator Series Model(s): N/A FCC ID: 2BTTZ-ORATOR Test Standards: FCC Part15.247 Page 2 of 54 Report No.: STS2511234W02 TEST REPORT Applicant’s Name ................. : Nanchang si colordisplay Technology Co., Ltd. Address ................................. : 679 Aixihu North Road, High tech Industrial Development Zone, Nanchang City, Jiangxi Province Manufacturer's Name .......... : Nanchang si colordisplay Technology Co., Ltd. Address ................................. : 679 Aixihu North Road, High tech Industrial Development Zone, Nanchang City, Jiangxi Province Product Description Product Name ....................... : Visel Glasses Brand Name .......................... : VISEL Model Name .......................... : Orator Series Model(s) .................... : N/A Standards ............................. : FCC Part15.247 Test Procedure ...................... : ANSI C63.10-2020 This device described above has been tested by STS, the test results show that the equipment under test (EUT) is in compliance with the FCC requirements. And it is applicable only to the tested sample identified in the report. The test results presented in this report relate only to the object tested. This report shall not be reproduced, except in full, without the written approval of the Shenzhen STS Test Services Co., Ltd. Date of Test ........................................... : Date of receipt of test item ..................... : 27 Nov. 2025 Date (s) of performance of tests ............. : 27 Nov. 2025 ~ 22 Dec. 2025 Date of Issue .......................................... : 22 Dec. 2025 Test Result.............................................. : Pass Testing Engineer : (Aaron Bu) Technical Manager : (Skylar Li) Authorized Signatory : (Bovey Yang) Page 3 of 54 Report No.: STS2511234W02 Table of Contents Page 1. SUMMARY OF TEST RESULTS 6 1.1 TEST FACTORY 7 1.2 MEASUREMENT UNCERTAINTY 7 2. GENERAL INFORMATION 8 2.1 GENERAL DESCRIPTION OF THE EUT 8 2.2 DESCRIPTION OF THE TEST MODES 9 2.3 TEST SOFTWARE AND POWER LEVEL 10 2.4 BLOCK DIAGRAM SHOWING THE CONFIGURATION OF SYSTEM TESTED 10 2.5 DESCRIPTION OF NECESSARY ACCESSORIES AND SUPPORT UNITS 11 2.6 EQUIPMENTS LIST 12 3. EMC EMISSION TEST 13 3.1 CONDUCTED EMISSION MEASUREMENT 13 3.2 TEST PROCEDURE 14 3.3 TEST SETUP 14 3.4 EUT OPERATING CONDITIONS 14 3.5 TEST RESULTS 15 4. RADIATED EMISSION MEASUREMENT 17 4.1 RADIATED EMISSION LIMITS 17 4.2 TEST PROCEDURE 19 4.3 TEST SETUP 20 4.4 EUT OPERATING CONDITIONS 20 4.5 FIELD STRENGTH CALCULATION 21 4.6 TEST RESULTS 22 5. CONDUCTED SPURIOUS & BAND EDGE EMISSION 29 5.1 LIMIT 29 5.2 TEST PROCEDURE 29 5.3 TEST SETUP 29 5.4 EUT OPERATION CONDITIONS 29 5.5 TEST RESULTS 29 6. POWER SPECTRAL DENSITY TEST 30 6.1 LIMIT 30 6.2 TEST PROCEDURE 30 6.3 TEST SETUP 30 Page 4 of 54 Report No.: STS2511234W02 Table of Contents Page 6.4 EUT OPERATION CONDITIONS 30 6.5 TEST RESULTS 30 7. BANDWIDTH TEST 31 7.1 LIMIT 31 7.2 TEST PROCEDURE 31 7.3 TEST SETUP 31 7.4 EUT OPERATION CONDITIONS 31 7.5 TEST RESULTS 31 8. PEAK OUTPUT POWER TEST 32 8.1 LIMIT 32 8.2 TEST PROCEDURE 32 8.3 TEST SETUP 33 8.4 EUT OPERATION CONDITIONS 33 8.5 TEST RESULTS 33 9. ANTENNA REQUIREMENT 34 9.1 STANDARD REQUIREMENT 34 9.2 EUT ANTENNA 34 APPENDIX 1-TEST DATA 35 MAXIMUM PEAK CONDUCTED OUTPUT POWER 35 -6DB BANDWIDTH 38 OCCUPIED CHANNEL BANDWIDTH 41 MAXIMUM POWER SPECTRAL DENSITY LEVEL 44 BAND EDGE 47 CONDUCTED RF SPURIOUS EMISSION 50 APPENDIX 2- EUT TEST PHOTO 54 Page 5 of 54 Report No.: STS2511234W02 Revision History Rev. Issue Date Report No. Effect Page Contents 00 22 Dec. 2025 STS2511234W02 ALL Initial Issue Page 6 of 54 Report No.: STS2511234W02 1. SUMMARY OF TEST RESULTS Test procedures according to the technical standards: KDB 558074 D01 15.247 Meas Guidance v05r02. FCC Part 15.247,Subpart C Standard Section Test Item Judgment Remark 15.207 Conducted Emission PASS -- 15.247 (a)(2) 6dB Bandwidth PASS -- 15.247 (b)(3) Output Power PASS -- 15.209 Radiated Spurious Emission PASS -- 15.247 (d) Conducted Spurious & Band Edge Emission PASS -- 15.247 (e) Power Spectral Density PASS -- 15.205 Restricted bands of operation PASS -- Part 15.247(d)/ Part 15.209(a) Band Edge Emission PASS -- 15.203 Antenna Requirement PASS -- Note: (1) ‘N/A’ denotes test is not applicable in this Test Report. (2) All tests are according to ANSI C63.10-2020. Page 7 of 54 Report No.: STS2511234W02 1.1 TEST FACTORY SHENZHEN STS TEST SERVICES CO., LTD Add. : 101, Building B, Zhuoke Science Park, No.190 Chongqing Road, ZhanChengShequ, Fuhai Sub-District, Bao’an District, Shenzhen, Guang Dong, China FCC test Firm Registration Number: 625569 IC test Firm Registration Number: 12108A A2LA Certificate No.: 4338.01 1.2 MEASUREMENT UNCERTAINTY The reported uncertainty of measurement y ± U, where expended uncertainty U is based on a standard uncertainty multiplied by a coverage factor of k=2, providing a level of confidence of approximately 95 %. No. Item Uncertainty 1 RF output power, conducted ±0.751dB 2 Unwanted Emissions, conducted ±2.888dB 3 All emissions, radiated 9K-30MHz ±2.48dB 4 All emissions, radiated 30M-1GHz ±2.52dB 5 All emissions, radiated 1G-18GHz ±3.48dB 6 All emissions, radiated>18GHz ±4.18dB 7 Conducted Emission (9KHz-150KHz) ±2.48dB 8 Conducted Emission (150KHz-30MHz) ±2.52dB 9 Occupied Channel Bandwidth ±3.6% 10 Power Spectral Density, conducted ±1.214dB 11 Duty Cycle ±3.2% Page 8 of 54 Report No.: STS2511234W02 2. GENERAL INFORMATION 2.1 GENERAL DESCRIPTION OF THE EUT Product Name Visel Glasses Brand Name VISEL Model Name Orator Series Mode…
Text truncated - open the document above for the full version.
Page 1 of 2 FCC ID: 2BTTZ-ORATOR Test Setup Photo AC Conduction RF Conduction Page 2 of 2 FCC ID: 2BTTZ-ORATOR RE (Below 1GHz) RE (Above 1GHz)
1624 Market St., Ste 226, 30327 · Denver, 80202 · United States
| # | Rule Parts | Frequency Range | Power Output |
|---|---|---|---|
| 1 | 15C | 2.40 GHz - 2.48 GHz | 1.61 mW |
| 2 | 15C | 2.40 GHz - 2.48 GHz | 1.52 mW |