2BTX9-F101wireless charger

https://function101.com/pages/support-home-page Scan the QR Code to visit our Support Page www.function101.com Wireless Charger FCC WARNING This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. 127($Q\FKDQJHVRUPRGLąFDWLRQVWRWKLVXQLWQRWH[SUHVVO\DSSURYHG by the party responsible for compliance could void the user's authority to operate the equipment. RF Exposure Statement To maintain compliance with FCC'S RF Exposure guidelines, This equipment should be installed and operated with minimum distance of 20cm between the radiator and your body. This device and its antenna(s) must not be co-located or operation in conjunction with any other antenna or transmitter.

Rev 1/26/2023 Bestop Technology Ltd. Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 01-06-2026 Ref: Attestation Statements Part 2.911(d)(5)(i) Filing FCC ID: 2BTX9-F101 [Bestop Technology Ltd.] certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. [Bestop Technology Ltd.] certifies that the equipment for which authorization is sought does not include cybersecurity or anti-virus software produced or provided by Kaspersky Lab, Inc. or any of its successors and assignees, including equipment with integrated Kaspersky Lab, Inc. (or any of its successors and assignees) cybersecurity or anti-virus software pursuant to DA-24-886 and KDB 986446 D01 Covered Equipment Guidance section B(2a). Device is inherently compliant based on hardware limitations or software controls. or A Software Bill of Materials (SBOM) is provided to the TCB for review, and The end-user or third parties cannot install additional software on this device. Sincerely, Signature： By: Sunny Tong Rev 1/26/2023 Bestop Technology Ltd. Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 01-06-2026 Ref: Attestation Statements Part 2.911(d)(5)(ii) Filing FCC ID: 2BTX9-F101 [Bestop Technology Ltd.] certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing “covered” equipment. Sincerely, Signature： By: Sunny Tong

Bestop Technology Ltd. U.S. Agent Letter of Attestation To: Federal Communications Commission 7435 Oakland Mills Road, Columbia, MD 21046, USA Date: December 31, 2025 Ref: Attestation Statement – Part 2.911(d)(7) filing FCC ID: 2BTX9-F101 Bestop Technology Ltd.(“the applicant”) certifies that, as of the date of the filing of the application, CLF Import and Export Limited (“the agent”) is our designated U.S. agent for service of process for the above reference FCC ID. The applicant accepts to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. The applicant further acknowledges it is our responsibility to inform the FCC whenever the agent information changes. CLF Import and Export Limited ("the agent) understand it is the agent's obligation to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and email address. Designated U.S. Agent Company Name: CLF Import and Export Limited FRN: 0033489683 Address: 1312 17th Street #692, Denver, CO 80202, United States Signature: Contact Person: David Chen Tel: +1 949 254 2565 Email: [email protected] Applicant Company Name: Bestop Technology Ltd. FRN: 0037802071 Address: No. 10, Pusha Road, Shalu Village, Tangxia Town, Dongguan City, Guangdong Province China Signature: Contact Person: Sunny Tong Tel: 13416795416 Email: [email protected]

FY-GZ001 Fine SPECIFICATION FOR APPROVAL 客戶 ： CUSTOMER: 擬制 PREPARED BY 審核 CHECKED BY 批准 APPROVED BY 客戶承認 CUSTOMER APPROVE 冯伯群 苏燕平 钱立谋 工厂地址： 深圳市宝安区沙井街道共和社区新和大道3、4号4号605 Factory Address: Room 605, No. 4, 3 & 4 Xinhe Avenue, Gonghe Community, Shajing Street, Bao'an District, Shenzhen City TEL：13824883512 客 戶 料 號： CUST P/N: 淘 软 料 號： BESOFTP/N: 産 品 型 號： DESC: 日期： DATE: 版本： 2025/12/18 14x39-13Ts-0.08x24*2P-8mm Version: Page1 of4 A.0 A11 magnetic attraction coil (Taoruan) - 8.0uH, coil thickness 0.65mm, diameter 43.5mm, double slot lead-out length 8mm, lead tip tin-plated within 3mm, 10mm inner hole on the bottom surface with double-sided adhesive, overall thickness 1.6mm Shenzhen Taoruan Electronics Co., Ltd. FY-GZ001 Fine Version Change History 版本 Rev . 變更 前 Bef or e Change 變更 後 After Change 更 改 日 期 ChangeDat e 批准 Appr ov ed By A.0 新发行 2025/12/18 ---- 钱立谋 Page2of4 FY-GZ001 Fine 産 品 型 號： DESC14x39-13Ts-0.08x24*2P-8mm-CLB 版本 Rev：A 0 客戶CUST: 淘软料号Fine P/N： 客户料号CUST P/N: 一、尺寸DIMENSION:(mm) 二、原理图S CHEMATIC DIAGRAM: 三、绕线参数Winding S pecification: A 39.0±1 B 13.9±0.1 C 0.8± 0.1 D1 9± 2 D2 8± 2 E 3m m±1.5 F 43.5±0.5 G 8 mm H 1.6±0.2 M ax I 5.3±0.3 序号 N Note: 1. The coil is attached with magnetic sheets. The size of the magnetic sheets is 43.5 ± 0.5 mm, the inner hole is 5.3 mm, the thickness is 0.8 ± 0.1 mm, and it has two slots. 2. At the outlet position of the coil, a 6 mm wide heat-resistant adhesive tape is wound. 3. On the back of the magnetic sheet, a circle with a diameter of 41.5 mm is attached (ref), and the inner hole is 10 mm, with ordinary back adhesive. O 端子 TERMINAL 线 径 WIRE 圈数 Turns 绕线方向 Winding D irection 1 S F 热风线0 .08*24*2P 13T s CCW 四、电气特性E LECTRICAL CHARACTERISTICS: 温度T EMP ERATURE : 25 ± 10 ° C , 湿度R ELATIVE HUMI DITY : 65 ± 20% 序号 NO 项目 ITEM 端子 TERMINAL 标准 SPECIFICATION 测试条件 TEST F RE QUENCY 测试仪器 TEST E QUIPMENTS 1 IND. S-F 5.2uH ±20% 单独线圈 100KHz/ 1.0V LCZ METER 1 062B 2 IND. S-F 8.0uH ± 10% 加磁片 100KHz/1.0V LCZ METER 1 062B 3 Q值 S-F ≤80(ref)加 磁片 100KHz/1.0V LCZ METER 1 062B 4 DCR S-F ≤100mΩ LCZ METER 502B 擬制/日期P REPARED BY/DATE審核/日期CHECKED BY/DATE 冯伯群2025/12/18 苏燕平2 025/12/18 Page3of4

Bestop Technology Ltd. Date: January 6, 2026 Product Model Number: F101-RCXXX, WB02, WB03, WB04, WB05, WB06, WB07, WB08, WB09, WB10, WB11, WB12, WB13, WB14, WB15 FCC ID: 2BTX9-F101 To whom it may concern, Re: Product Certification Representative Authorization Letter We authorize QAI Laboratories Ltd. 3980 North Fraser Way, Burnaby B.C. Canada V5J 5K5 to act on our behalf on all matters concerning the above named equipment. This shall include the following: • Testing • Approval applications and procedures We declare that QAI Laboratories Ltd. is allowed to forward all information related to the approval project to the applied certification body and to the notification entities and to discuss any issues concerning the approval application. Any and all acts carried out by QAI Laboratories Ltd. on our behalf shall have the same effect as acts of our own. Contact Listed on FCC Wesbite Signature： By: Sunny Tong Title: Manager Email: [email protected] Telephone: 13416795416 On behalf of: Bestop Technology Ltd.

Bestop Technology Ltd. Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: January 6, 2026 Subject; Request for Confidentiality FCC ID: 2BTX9-F101 To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description Tune-up Procedure Software Security Requirements for UNII devices It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature： By: Sunny Tong Title: Manager

Bestop Technology Ltd. Model Difference Statement Dear Sir/Madam, FCC ID: 2BTX9-F101 Date: January 6, 2026 Added models WB02, WB03, WB04, WB05, WB06, WB07, WB08, WB09, WB10, WB11, WB12, WB13, WB14, WB15 basis of the original product F101-RCXXX The manufacturer declares that the listed series models have different appearance colors, shapes and model names from the main model, but the circuits and electronic structures are the same. Sincerely, Signature： By: Sunny Tong Title: Manager Email: [email protected] Telephone: 13416795416 On behalf of: Bestop Technology Ltd.

Report No: SSP25120310-1&2E FCC ID: 2BTX9-F101 Annex of Test Report Annex A. EUT External Photos Model: F101-RCXXX EUT View 1 EUT View 2 Report No: SSP25120310-1&2E FCC ID: 2BTX9-F101 Annex of Test Report EUT View 3 EUT View 4 Report No: SSP25120310-1&2E FCC ID: 2BTX9-F101 Annex of Test Report EUT View 5 EUT View 6 Report No: SSP25120310-1&2E FCC ID: 2BTX9-F101 Annex of Test Report EUT View 7 EUT View 8 Report No: SSP25120310-1&2E FCC ID: 2BTX9-F101 Annex of Test Report EUT View 8

Report No: SSP25120310-1&2E FCC ID: 2BTX9-F101 Annex of Test Report Annex D. Label and Information FCC Label Sample Label Size : 30mm*20mm FCC Label Specifications Text is Black in color and is justified. Labels are printed in indelible ink on permanent adhesive backing or silk-screened onto the EUT or shall be affixed at a conspicuous location on the EUT. Where the EUT is constructed in two or more sections connected by wires and marketed together, the above statement is required to be affixed only to the main control unit. When the EUT is so small or for such use that it is not practicable to place the statement on it, the above information shall be placed in a prominent location in the instruction manual or pamphlet supplied to the user or, alternatively, shall be placed on the container in which the device is marketed. FCC Label Location

Report No: SSP25120310-1&2E FCC ID: 2BTX9-F101 Annex of Test Report Annex B. EUT Internal Photos EUT Internal View 1 EUT Internal View 2 Coil Antenna Report No: SSP25120310-1&2E FCC ID: 2BTX9-F101 Annex of Test Report EUT Internal View 3 EUT Internal View 4 Report No: SSP25120310-1&2E FCC ID: 2BTX9-F101 Annex of Test Report EUT Internal View 5 EUT Internal View 6

Report No: SSP25120310-2H FCC Test Report Page 1 of 12 RF Exposure Report FCC ID: 2BTX9-F101 Report No. : SSP25120310-2H Applicant : Bestop Technology Ltd. Product Name : wireless charger Model Name : F101-RCXXX Test Standard : FCC CFR 47 PART 1, 1.1310 Date of Issue : 2026-01-12 Shenzhen CCUT Quality Technology Co., Ltd. 1F, Building 35, Changxing Technology Industrial Park, Yutang Street, Guangming District, Shenzhen, Guangdong, China; (Tel.:+86-755-23406590 website: www.ccuttest.com) This test report is limited to the above client company and the product model only. It may not be duplicated without prior permitted by Shenzhen CCUT Quality Technology Co., Ltd. Report No: SSP25120310-2H FCC Test Report Page 2 of 12 Test Report Basic Information Applicant..................................: Bestop Technology Limited. Address of Applicant...............: No. 10, Pusha Road, Shalu Village, Tangxia Town, Dongguan City, Guangdong Province China Manufacturer..........................: Bestop Technology Limited. Address of Manufacturer........: No. 10, Pusha Road, Shalu Village, Tangxia Town, Dongguan City, Guangdong Province China Product Name.........................: wireless charger Brand Name.............................: - Main Model..............................: F101-RCXXX Series Models..........................: WB02, WB03, WB04, WB05, WB06, WB07, WB08, WB09, WB10, WB11, WB12, WB13, WB14, WB15 Test Standard..........................: FCC CFR 47 PART 1, 1.1310 KDB 680106 D01 Wireless Power Transfer v04 Date of Test .............................: 2025-12-12 to 2026-01-12 Test Result...............................: PASS Tested By ................................: (Colin Chen) Reviewed By............................: (Lorzix Luo) Authorized Signatory............: (Lahm Peng) Note : This test report is limited to the above client company and the product model only. It may not be duplicated without prior permitted by Shenzhen CCUT Quality Technology Co., Ltd.. All test data presented in this test report is only applicable to presented test sample. Report No: SSP25120310-2H FCC Test Report Page 3 of 12 CONTENTS 1. General Information ....................................................................................................................................................5 1.1 Product Information .............................................................................................................................................5 1.2 Test Setup Information..........................................................................................................................................6 1.3 Test Facilities ........................................................................................................................................................6 1.4 List of Measurement Instruments ..........................................................................................................................7 1.5 Measurement Uncertainty .....................................................................................................................................7 2. RF Exposure .................................................................................................................................................................8 2.1 Standard and Limit................................................................................................................................................8 2.2 Test Procedures ....................................................................................................................................................8 2.3 Test Data and Results ............................................................................................................................................9 Annex A. Test Photos ..................................................................................................................................................... 10 Report No: SSP25120310-2H FCC Test Report Page 4 of 12 Revision History Revision Issue Date Description Revised By V1.0 2026-01-12 Initial Release Lahm Peng Report No: SSP25120310-2H FCC Test Report Page 5 of 12 1. General Information 1.1 Product Information Product Name: wireless charger Trade Name: - Test Model: F101-RCXXX Series Models: WB02, WB03, WB04, WB05, WB06, WB07, WB08, WB09, WB10, WB11, WB12, WB13, WB14, WB15 Rated Voltage: Input: 5/9/12/15/20V⎓3.25A Type-C Cable Output: 20V⎓3A Watch/earphone:2.5W Phone:5W Battery: - Test Sample No: SSP25120310-1 Hardware Version: V1.0 Software Version: V1.0 Note 1: The test data is gathered from a production sample, provided by the manufacturer. Note 2: The manufacturer declares that the listed series models have different appearance colors, shapes and model names from the main model, but the circuits and electronic structures are the same. Wireless Specification Wireless Standard: WPC (QI) Operating Frequency: Apple Watch: 325kHz Watch: 120-320kHz Phone: 110.5-205kHz Modulation: ASK Antenna Gain: 0dBi Type of Antenna: Coil Antenna Type of Device: Portable Device Mobile Device Report No: SSP25120310-2H FCC Test Report Page 6 of 12 1.2 Test Setup Information List of Test Modes Test Mode Description Remark TM1 Wireless charging 5W (Phone) - TM2 Wireless charging 2.5W (Watch) - TM3 Wireless charging 2.5W (earphone) - Note: All modes have been tested and only the worst mode TM1 data is represented in the report. List and Details of Auxiliary Cable Description Length (cm) Shielded/Unshielded With/Without Ferrite - - - - List and Details of Auxiliary Equipment Description Manufacturer Model Serial Number Adapter UGREEN CD289 90324 Phone iPhone iPhone 12pro - 1.3 Test Facilities Laboratory Name: Shenzhen CCUT Quality Technology Co., Ltd. 1F, Building 35, Changxing Technology Industrial Park, Yutang Street, Guangming District, Shenzhen, Guangdong, China CNAS Laboratory No.: L18863 A2LA Certificate No.: 6983.01 FCC Registra…

Text truncated - open the document above for the full version.

Report No: SSP25120310-1E FCC Test Report Page 1 of 25 FCC TEST REPORT FCC ID: 2BTX9-F101 Report No. : SSP25120310-1E Applicant : Bestop Technology Limited. Product Name : wireless charger Model Name : F101-RCXXX Test Standard : FCC Part 15 Subpart C Date of Issue : 2026-01-13 Shenzhen CCUT Quality Technology Co., Ltd. 1F, Building 35, Changxing Technology Industrial Park, Yutang Street, Guangming District, Shenzhen, Guangdong, China; (Tel.:+86-755-23406590 website: www.ccuttest.com) This test report is limited to the above client company and the product model only. It may not be duplicated without prior permitted by Shenzhen CCUT Quality Technology Co., Ltd. Report No: SSP25120310-1E FCC Test Report Page 2 of 25 Test Report Basic Information Applicant..................................: Bestop Technology Limited. Address of Applicant...............: No. 10, Pusha Road, Shalu Village, Tangxia Town, Dongguan City, Guangdong Province China Manufacturer..........................: Bestop Technology Limited. Address of Manufacturer........: No. 10, Pusha Road, Shalu Village, Tangxia Town, Dongguan City, Guangdong Province China Product Name.........................: wireless charger Brand Name.............................: - Main Model..............................: F101-RCXXX Series Models..........................: WB02, WB03, WB04, WB05, WB06, WB07, WB08, WB09, WB10, WB11, WB12, WB13, WB14, WB15 Test Standard..........................: FCC Part 15 Subpart C ANSI C63.4-2014 ANSI C63.10-2020 Date of Test .............................: 2025-12-12 to 2026-01-13 Test Result...............................: PASS Tested By ................................: (Colin Chen) Reviewed By............................: (Lorzix Luo) Authorized Signatory............: (Lahm Peng) Note : This test report is limited to the above client company and the product model only. It may not be duplicated without prior permitted by Shenzhen CCUT Quality Technology Co., Ltd.. All test data presented in this test report is only applicable to presented test sample. Report No: SSP25120310-1E FCC Test Report Page 3 of 25 CONTENTS 1. General Information ....................................................................................................................................................5 1.1 Product Information .............................................................................................................................................5 1.2 Test Setup Information..........................................................................................................................................6 1.3 Compliance Standards ...........................................................................................................................................7 1.4 Test Facilities ........................................................................................................................................................7 1.5 List of Measurement Instruments ..........................................................................................................................8 1.6 Measurement Uncertainty .....................................................................................................................................8 2. Summary of Test Results .............................................................................................................................................9 3. Antenna Requirement ............................................................................................................................................... 10 3.1 Standard and Limit.............................................................................................................................................. 10 3.2 Test Result .......................................................................................................................................................... 10 4. Conducted Emissions ................................................................................................................................................ 11 4.1 Standard and Limit.............................................................................................................................................. 11 4.2 Test Procedure.................................................................................................................................................... 11 4.3 Test Data and Results .......................................................................................................................................... 12 5. Radiated Emissions ................................................................................................................................................... 15 5.1 Standard and Limit.............................................................................................................................................. 15 5.2 Test Procedure.................................................................................................................................................... 15 5.3 Test Data and Results .......................................................................................................................................... 17 6. Occupied Bandwidth ................................................................................................................................................. 22 6.1 Standard and Limit.............................................................................................................................................. 22 6.2 Test Procedure.................................................................................................................................................... 22 6.3 Test Data and Results ...................................................................................................................................…

Text truncated - open the document above for the full version.

Report No: SSP25120310-1&2E FCC ID: 2BTX9-F101 Annex of Test Report Annex C. Test Photos Conducted Emission Test View 1 Radiated Emission Test View 1 Report No: SSP25120310-1&2E FCC ID: 2BTX9-F101 Annex of Test Report Radiated Emission Test View 2