2BTYS-9120Intelligent electronic clock

Function Description I. Function Settings [TIME]Time settings Short press to select whether the second dot flashes or remains on. Hold the key for 2 seconds to access the time settings. Use the UP/DOWN keys to adjust the time in the order of "year → month → day → 12/24 hours → hour → minute", then press the TIME key to confirm and exit. [ALARM] Alarm Settings Press and hold the ALARM button to select Alarm 1, Alarm 2, or Time, Date, Temperature, and Day mode. Alarm 1 Settings: Press and hold the ALARM button to select the alarm mode. Use the UP/DOWN buttons to turn the alarm on or off (--AL for off, onAL for on). Hold the ALARM button for 2 seconds to activate the flashing indicator. Use the UP/DOWN buttons to adjust settings sequentially. For weekday alarm mode, select "ON E" for a 5-day cycle or "--E" for a 7-day cycle. Confirm your settings by pressing the ALARM button to exit. Alarm 2 settings: Synchronize Alarm 1 sequence settings; Drowsiness duration: 5 minutes, press any key to exit. [Timer]: Set to forward or backward Positive timing mode (display: UP); Countdown mode (display: dn). Press UP/DOWN to select the mode and set the timer duration (long press to fast-forward). Positive timing range: 99 minutes 59 seconds; Countdown range: 99 minutes 99 seconds. Short press the timer button to start/timereckording temporarily. Long press for 2 seconds to exit the timer interface. [LIGHT]Light Color: Short press to cycle through 12 colors, long press 2 seconds to cycle brightness (3 levels). [UP] key: Short press to switch between Celsius (°C) and Fahrenheit (°F). Temperature detection range: -10 to 50°C (14 to 122°F); humidity detection range: 20 to 95% [DOWN] key： Press and hold the DOWN button on the time interface to enter the auto-sensing mode (--AU turns off sensing, onAU turns it on). [RESET] Reset button: Short press to turn Bluetooth on again, long press for 2 seconds to reset. (Note: The reset button is a small hole in the top-right corner.) II. Remote Control Operation []Key: Power on/off [RETURN] key: In time/alarm settings, a short press does not save the current settings and returns to the time interface. [12/24] Key: Switch to 12/24-hour mode. [—]key: Short-press to activate the auto-sensing function in the time interface. [+]Key: Short press to switch between temperature and Fahrenheit in the time interface. [SET]Key: Press the SET key briefly to enter the time/alarm setting mode. Use the +/− keys to adjust the settings in the following order: year → month → day → 12/24 hours → hour → minute. Press the SET key again to exit the setting mode. []Alarm settings: In the time interface, short press to switch between Alarm 1 and Alarm 2. Press SET to adjust settings. For weekday alarm mode, select "ON E" for 5-day or "--E" for 7-day cycles, then press SET to confirm and exit. Sleep duration: 5 minutes. Press any key to exit. [OK]Countdown buttons Press OK to enter normal timing mode (display: UP), range: 0:00~99:59. Press UP/DOWN to enter countdown mode (display: dn), range: 0:00~99:99 (you can set directly with 0-9 numeric keys). Short press OK to start/pause timing, long press 2 seconds to exit timing interface. []Key: Short press the second dot to make it appear or flash on any interface. []Light sensor: Press to turn on/off the auto dimming function; (--AU off, onAU on) []Brightness: Three levels. [0-9] Keys: Press 0-9 to select values quickly. The keys display different colors. Press SET to confirm. III.Bluetooth time synchronization feature Turn on both device Bluetooth and phone Bluetooth. The phone will display "TIME-100" when detected. Tap to connect, and the phone will quickly pair with the device. Once paired and authorized, the phone will automatically retrieve the time. Bluetooth icon: Bluetooth off: "" off. Bluetooth on: "" flashes. Time synchronization successful: "" Always on. DST: Press and hold the timer button or press the 0 button on the remote control to switch to DST. DC5.0V 2A power supply; 3.0V AAA*2 power failure memory use. FCC Warning This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. NOTE 2: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. RF Exposure Statement To maintain compliance with FCC'S RF Exposure guidelines, This equipment should be installed and operated with minimum 20cm between the radiator and your body. This device and its antenna(s) must not be co-located or operation in conjunction with any other antenna or transmitter.

Rev 1/26/2023 Putian Chuangmeite Electronic Technology Co., Ltd Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 01-05-2026 Ref: Attestation Statements Part 2.911(d)(5)(i) Filing FCC ID: 2BTYS-9120 [Putian Chuangmeite Electronic Technology Co., Ltd] certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. [Putian Chuangmeite Electronic Technology Co., Ltd] certifies that the equipment for which authorization is sought does not include cybersecurity or anti-virus software produced or provided by Kaspersky Lab, Inc. or any of its successors and assignees, including equipment with integrated Kaspersky Lab, Inc. (or any of its successors and assignees) cybersecurity or anti-virus software pursuant to DA-24- 886 and KDB 986446 D01 Covered Equipment Guidance section B(2a). Device is inherently compliant based on hardware limitations or software controls. or A Software Bill of Materials (SBOM) is provided to the TCB for review, and The end-user or third parties cannot install additional software on this device. Sincerely, (Applicant signature) (Applicant printed name) yang xiaoning Rev 1/26/2023 Putian Chuangmeite Electronic Technology Co., Ltd Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 01-05-2026 Ref: Attestation Statements Part 2.911(d)(5)(ii) Filing FCC ID: 2BTYS-9120 [Putian Chuangmeite Electronic Technology Co., Ltd] certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing “covered” equipment. Sincerely, (Applicant signature) (Applicant printed name) yang xiaoning

Putian Chuangmeite Electronic Technology Co., Ltd U.S. Agent Letter of Attestation To: Federal Communications Commission 7435 Oakland Mills Road, Columbia, MD 21046, USA Date: January 5, 2026 Ref: Attestation Statement – Part 2.911(d)(7) filing FCC ID: 2BTYS-9120 Putian Chuangmeite Electronic Technology Co., Ltd (“the applicant”) certifies that, as of the date of the filing of the application, CLF Import and Export Limited (“the agent”) is our designated U.S. agent for service of process for the above reference FCC ID. The applicant accepts to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. The applicant further acknowledges it is our responsibility to inform the FCC whenever the agent information changes. CLF Import and Export Limited ("the agent) understand it is the agent's obligation to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and email address. Designated U.S. Agent Company Name: CLF Import and Export Limited FRN: 0033489683 Address: 1312 17th Street #692, Denver, CO 80202, United States Signature: Contact Person: David Chen Tel: +1 949 254 2565 Email: [email protected] Applicant Company Name: Putian Chuangmeite Electronic Technology Co., Ltd FRN: 0037806379 Address: 183 Gongping Road, Jiangkou Town, Hanjiang District, Putian City, Fujian Province, China Signature: Contact Person: yang xiaoning Tel: +86-15013663030 Email: [email protected]

Productspecification QuickReferenceDate PCB Antenna Frequency 2.45GHz *1 Ant.PortInputPwr.(dBm)0(Typ.BTclass2outputpower) Tot.Rad.Pwr.(dBm)-2.3(Inputpwr–losspwr) PeakEIRP(dBm)1.7 Directivity(dBi)1 (alldirection antenna) Efficiency(dB)-2.3 (58.5%) Gain(dBi)1.7 (Peak Gain XY-plane) MaximumPower(dBm)1.7(XY-plane) MinimumPower(dBm)-4(XY-plane) Avg.Power(dBm)-0.5(XY-plane) Max/MinRatio(dB)5.3(XY-plane) Max/AvgRatio(dB)1.8(XY-plane) Min/AvgRatio(dB)-3.5(XY-plane) AverageGain(dB)-0.5(AvgGainXY-plane) All the technical data and information contained herein ar e subject to change without prior notice AntennaLayout&moduleonthesystemboard AntennaGain GainTable [email protected] y PeakAvg.PeakAvg.PeakAvg. ModuleBoard 1.3-0.51.7-3.81.1-3.058.5% Type of Antenna: Manufacturer: Dongguan Qining Electronics Co.,LTD Address: 4th Floor, Building 5, Hong Kong Synthetic Group, No.1 Huili 2nd Road, Fenghuanggang, Tangxia Town, Dongguan City, China ReturnLoss TheEnvironmentofAntennaRadiationPattern 3Dradiationpatterndiagram XY-planeXZ-planeYZ-plane

Putian Chuangmeite Electronic Technology Co., Ltd Date: January 5, 2026 Product Model Number: 9120, 9130, 9135, 9136, 9108, 9112, 9115, 9116, 9127, 9099, 9088 FCC ID: 2BTYS-9120 To whom it may concern, Re: Product Certification Representative Authorization Letter We authorize QAI Laboratories Ltd. 3980 North Fraser Way, Burnaby B.C. Canada V5J 5K5 to act on our behalf on all matters concerning the above named equipment. This shall include the following:  Testing  Approval applications and procedures We declare that QAI Laboratories Ltd. is allowed to forward all information related to the approval project to the applied certification body and to the notification entities and to discuss any issues concerning the approval application. Any and all acts carried out by QAI Laboratories Ltd. on our behalf shall have the same effect as acts of our own. By: yang xiaoning Contact Listed on FCC Wesbite Title: Manager Email: [email protected] Telephone: +86-15013663030 On behalf of: Putian Chuangmeite Electronic Technology Co., Ltd

Putian Chuangmeite Electronic Technology Co., Ltd Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: January 5, 2026 Subject; Request for Confidentiality FCC ID: 2BTYS-9120 To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description Tune-up Procedure Software Security Requirements for UNII devices It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: yang xiaoning Title: Manager

Putian Chuangmeite Electronic Technology Co., Ltd Model Difference Statement DATE: January 5, 2026 FCC ID: 2BTYS-9120 Dear Sir/Madam, Added models 9130, 9135, 9136, 9108, 9112, 9115, 9116, 9127, 9099, 9088 basis of the original product 9120. The color of appearance and model name of series models listed are different from the main model, but the circuit and the electronic construction are the same, declared by the manufacturer. Sincerely, Name: yang xiaoning Title: Manager Company name: Putian Chuangmeite Electronic Technology Co., Ltd Address: 183 Gongping Road, Jiangkou Town, Hanjiang District, Putian City, Fujian Province, China

Report No: SSP25120552-1E FCC ID: 2BTYS-9120 Annex of Test Report Annex A. EUT External Photos EUT View 1 EUT View 2 Report No: SSP25120552-1E FCC ID: 2BTYS-9120 Annex of Test Report EUT View 3 EUT View 4 Report No: SSP25120552-1E FCC ID: 2BTYS-9120 Annex of Test Report EUT View 5 EUT View 6 Report No: SSP25120552-1E FCC ID: 2BTYS-9120 Annex of Test Report EUT View 7 EUT View 8

Report No: SSP25120552-1E FCC ID: 2BTYS-9120 Annex of Test Report Annex D. Label and Inf ormation FCC Label Sample FCC Labe Size: 8cm * 3cm FCC Label Specifications Text is Black in color and is justified. Labels are printed in indelible ink on permanent adhesive backing or silk-screened onto the EUT or shall be affixed at a conspicuous location on the EUT. Where the EUT is constructed in two or more sections connected by wires and marketed together, the above statement is required to be affixed only to the main control unit. When the EUT is so small or for such use that it is not practicable to place the statement on it, the above information shall be placed in a prominent location in the instruction manual or pamphlet supplied to the user or, alternatively, shall be placed on the container in which the device is marketed. FCC Label Location Label Location

Report No: SSP25120552-1E FCC ID: 2BTYS-9120 Annex of Test Report Annex B. EUT Internal Photos EUT Internal View 1 EUT Internal View 2 Report No: SSP25120552-1E FCC ID: 2BTYS-9120 Annex of Test Report EUT Internal View 3 EUT Internal View 4 PCB ANT Report No: SSP25120552-1E FCC ID: 2BTYS-9120 Annex of Test Report EUT Internal View 5 EUT Internal View 6

FCC ID: 2BTYS-9120 RF Exposure Evaluation Limits The criteria listed in the following table shall be used to evaluate the environment impact of human exposure to radio frequency (RF) radiation as specified in 1.1307(b) Limits for Maximum Permissible Exposure (MPE) Frequency range (MHz) Electric field strength (V/m) Magnetic field strength (A/m) Power density (mW/cm 2 ) Averaging time (minutes) (A) Limits for Occupational/Controlled Exposures 0.3–3.0 614 1.63 *(100) 6 3.0–30 1842/f 4.89/f *(900/f 2 ) 6 30–300 61.4 0.163 1.0 6 300–1500 f/300 6 1500–100,000 5 6 (B) Limits for General Population/Uncontrolled Exposure 0.3–1.34 614 1.63 *(100) 30 1.34–30 824/f 2.19/f *(180/f 2 ) 30 30–300 27.5 0.073 0.2 30 300–1500 f/1500 30 1500–100,000 1.0 30 f = frequency in MHz Friis transmission formula: Pd = (Pout*G)/(4*pi*r 2 ) Where Pd = power density in mW/cm 2 , Pout = output power to antenna in mW; G = gain of antenna in linear scale, Pi = 3.1416; R = distance between observation point and center of the radiator in cm Pd id the limit of MPE, 1 mW/cm 2 . If we know the maximum gain of the antenna and the total power input to the antenna, through the calculation, we will know the distance r where the MPE limit is reached. Test Procedure Software provided by client enabled the EUT to transmit and receive data at lowest, middle and highest channel individually. Test Result of RF Exposure Evaluation For BLE Mode Output power to antenna (dBm) Tune-up Power(dBm) Max Tune-up Power(dBm) Output power to antenna (mW) Power Density at R=20cm (mW/cm2) Limit (mW/cm2) Result GFSK 1.02 1(±1) 2 1.58 0.0005 1.0 PASS Remark: antenna gain= 1.7dBi

Report No: SSP25120552-1E FCC Test Report Page 1 of 33 FCC TEST REPORT FCC ID: 2BTYS-9120 Report No. : SSP25120552-1E Applicant : Putian Chuangmeite Electronic Technology Co., Ltd Product Name : Intelligent electronic clock Model Name : 9120 Test Standard : FCC Part 15.247 Date of Issue : 2025-12-31 Shenzhen CCUT Quality Technology Co., Ltd. 1F, Building 35, Changxing Technology Industrial Park, Yutang Street, Guangming District, Shenzhen, Guangdong, China; (Tel.:+86-755-23406590 website: www.ccuttest.com) This test report is limited to the above client company and the product model only. It may not be duplicated without prior permitted by Shenzhen CCUT Quality Technology Co., Ltd. Report No: SSP25120552-1E FCC Test Report Page 2 of 33 Test Report Basic Information Applicant..................................: Putian Chuangmeite Electronic Technology Co., Ltd Address of Applicant...............: 183 Gongping Road, Jiangkou Town, Hanjiang District, Putian City, Fujian Province, China Manufacturer..........................: Putian Chuangmeite Electronic Technology Co., Ltd Address of Manufacturer........: 183 Gongping Road, Jiangkou Town, Hanjiang District, Putian City, Fujian Province, China Product Name.........................: Intelligent electronic clock Brand Name.............................: - Main Model..............................: 9120 Series Models..........................: 9130, 9135, 9136, 9108, 9112, 9115, 9116, 9127, 9099, 9088 Test Standard..........................: FCC Part 15 Subpart C KDB 558074 D01 15.247 Meas Guidance v05r02 ANSI C63.4-2014 ANSI C63.10-2020 Date of Test .............................: 2025-12-23 to 2025-12-30 Test Result...............................: PASS Tested By ................................: (Walker Wu) Reviewed By............................: (Lorzix Luo) Authorized Signatory............: (Lahm Peng) Note : This test report is limited to the above client company and the product model only. It may not be duplicated without prior permitted by Shenzhen CCUT Quality Technology Co., Ltd.. All test data presented in this test report is only applicable to presented test sample. Report No: SSP25120552-1E FCC Test Report Page 3 of 33 CONTENTS 1. General Information ....................................................................................................................................................5 1.1 Product Information .............................................................................................................................................5 1.2 Test Setup Information..........................................................................................................................................6 1.3 Compliance Standards ...........................................................................................................................................7 1.4 Test Facilities ........................................................................................................................................................7 1.5 List of Measurement Instruments ..........................................................................................................................8 1.6 Measurement Uncertainty .....................................................................................................................................9 2. Summary of Test Results ........................................................................................................................................... 10 3. Antenna Requirement ............................................................................................................................................... 11 3.1 Standard and Limit.............................................................................................................................................. 11 3.2 Test Result .......................................................................................................................................................... 11 4. Conducted Emissions ................................................................................................................................................ 12 4.1 Standard and Limit.............................................................................................................................................. 12 4.2 Test Procedure.................................................................................................................................................... 12 4.3 Test Data and Results .......................................................................................................................................... 13 5. Radiated Emissions ................................................................................................................................................... 16 5.1 Standard and Limit.............................................................................................................................................. 16 5.2 Test Procedure.................................................................................................................................................... 16 5.3 Test Data and Results .......................................................................................................................................... 18 6. Band-edge Emissions(Radiated) ............................................................................................................................... 22 6.1 Standard and Limit.............................................................................................................................................. 22 6.2 Test Procedure.................................................................................................................................................... 22 6.3 Test Data and Results .............................................…

Text truncated - open the document above for the full version.

Report No: SSP25120552-1E FCC ID: 2BTYS-9120 Annex of Test Report Annex C. Test Photos Conducted Emission Test View Radiated Emission Test View Below 1GHz Report No: SSP25120552-1E FCC ID: 2BTYS-9120 Annex of Test Report Radiated Emission Test View Above 1GHz