2BU98-H002-33LED String Light

12 3 4 56 String light length:10/15/20/30/40/50/61m 33/49/66/99/132/164/200ft 7 8910 1112 Attentions: Package Includes： 1. The rope lights for outside can not be connected or cut. You can fold it. 2. If the remote control and the app suddenly stop working properly, it may be that the system is stuck. Please wait a few seconds or unplug the power supply and replug it. Occasionally, the remote control may not respond, requiring you to use the mobile app to turn the light back on. 3.The store has separate remote controls available for purchase. 4. The light string only suppor ts Bluetooth APP connection, not WiFi connection. 1 x Adapter 1 x Rope Light 1 x Remote Controller (Batter y Included) 1 x User Manual

Rev 1/26/2023 Shenzhen Feixiang Optoelectronics Co., Ltd Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 03-23-2026 Ref: Attestation Statements Part 2.911(d)(5)(i) Filing FCC ID: 2BU98-H002-33 [Shenzhen Feixiang Optoelectronics Co., Ltd] certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. [Shenzhen Feixiang Optoelectronics Co., Ltd] certifies that the equipment for which authorization is sought does not include cybersecurity or anti-virus software produced or provided by Kaspersky Lab, Inc. or any of its successors and assignees, including equipment with integrated Kaspersky Lab, Inc. (or any of its successors and assignees) cybersecurity or anti-virus software pursuant to DA-24-886 and KDB 986446 D01 Covered Equipment Guidance section B(2a). Device is inherently compliant based on hardware limitations or software controls. or A Software Bill of Materials (SBOM) is provided to the TCB for review, and The end-user or third parties cannot install additional software on this device. Sincerely, (Applicant signature) (Applicant printed name) Lemon feng Rev 1/26/2023 Shenzhen Feixiang Optoelectronics Co., Ltd Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 03-23-2026 Ref: Attestation Statements Part 2.911(d)(5)(ii) Filing FCC ID: 2BU98-H002-33 [Shenzhen Feixiang Optoelectronics Co., Ltd] certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing “covered” equipment. Sincerely, (Applicant signature) (Applicant printed name) Lemon feng

Shenzhen Feixiang Optoelectronics Co., Ltd U.S. Agent Letter of Attestation To: Federal Communications Commission 7435 Oakland Mills Road, Columbia, MD 21046, USA Date: March 23, 2026 Ref: Attestation Statement – Part 2.911(d)(7) filing FCC ID: 2BU98-H002-33 Shenzhen Feixiang Optoelectronics Co., Ltd(“the applicant”) certifies that, as of the date of the filing of the application, CLF Import and Export Limited (“the agent”) is our designated U.S. agent for service of process for the above reference FCC ID. The applicant accepts to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. The applicant further acknowledges it is our responsibility to inform the FCC whenever the agent information changes. CLF Import and Export Limited ("the agent) understand it is the agent's obligation to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and email address. Designated U.S. Agent Company Name: CLF Import and Export Limited FRN: 0033489683 Address: 1312 17th Street #692, Denver, CO 80202, United States Signature: Contact Person: David Chen Tel: +1 949 254 2565 Email: [email protected] Applicant Shenzhen Feixiang Optoelectronics Co., Ltd FRN: 0038176848 Address: 304, Building H, Dalang Shiguan Industrial Zone, Dalang Street, Longhua District, Shenzhen, China Signature: Contact Person: Lemon feng Tel: +86-18211307641 Email: [email protected]

Shenzhen Feixiang Optoelectronics Co., Ltd Date: March 23, 2026 Product Model Number: H002-33, H002-49, H002-66, H002-99, H002-132, H002- 164, H002-200, H008-33, H008-49, H008-66, H008-99, H008-132, H008-164, H008-200 FCC ID: 2BU98-H002-33 To whom it may concern, Re: Product Certification Representative Authorization Letter We authorize QAI Laboratories Ltd. 3980 North Fraser Way, Burnaby B.C. Canada V5J 5K5 to act on our behalf on all matters concerning the above named equipment. This shall include the following:  Testing  Approval applications and procedures We declare that QAI Laboratories Ltd. is allowed to forward all information related to the approval project to the applied certification body and to the notification entities and to discuss any issues concerning the approval application. Any and all acts carried out by QAI Laboratories Ltd. on our behalf shall have the same effect as acts of our own. By: Lemon feng Contact Listed on FCC Wesbite Title: Manager Email: [email protected] Telephone: +86-18211307641 On behalf of: Shenzhen Feixiang Optoelectronics Co., Ltd

Shenzhen Feixiang Optoelectronics Co., Ltd Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: March 23, 2026 Subject; Request for Confidentiality FCC ID: 2BU98-H002-33 To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description Tune-up Procedure Software Security Requirements for UNII devices It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: Lemon feng Title: Manager

Shenzhen Feixiang Optoelectronics Co., Ltd Model Difference Statement DATE: March 23, 2026 FCC ID: 2BU98-H002-33 Dear Sir/Madam, Added models H002-49, H002-66, H002-99, H002-132, H002-164, H002-200, H008-33, H008-49, H008-66, H008-99, H008-132, H008-164, H008-200 basis of the original product H002-33. The lengths and model names of the series of light strings listed are all different from those of the main model, but the circuit and the electronic construction are the same, declared by the manufacturer. Sincerely, Name: Lemon feng Title: Manager Company name: Shenzhen Feixiang Optoelectronics Co., Ltd Address: 304, Building H, Dalang Shiguan Industrial Zone, Dalang Street, Longhua District, Shenzhen, China

Report No: SSP26030244-1E FCC ID: 2BU98-H002-33 Annex of Test Report Annex A. EUT External Photos Model: H002-33 EUT View 1 EUT View 2 Report No: SSP26030244-1E FCC ID: 2BU98-H002-33 Annex of Test Report EUT View 3 EUT View 4 Report No: SSP26030244-1E FCC ID: 2BU98-H002-33 Annex of Test Report EUT View 5 EUT View 6 Report No: SSP26030244-1E FCC ID: 2BU98-H002-33 Annex of Test Report EUT View 7 EUT View 8 Report No: SSP26030244-1E FCC ID: 2BU98-H002-33 Annex of Test Report Model: H008-99 EUT View 9

Report No: SSP26030244-1E FCC ID: 2BU98-H002-33 Annex of Test Report Annex D. Label and Inf ormation FCC Label Sample FCC Labe Size: 2cm* 0.6cm FCC Label Specifications Text is Black in color and is justified. Labels are printed in indelible ink on permanent adhesive backing or silk-screened onto the EUT or shall be affixed at a conspicuous location on the EUT. Where the EUT is constructed in two or more sections connected by wires and marketed together, the above statement is required to be affixed only to the main control unit. When the EUT is so small or for such use that it is not practicable to place the statement on it, the above information shall be placed in a prominent location in the instruction manual or pamphlet supplied to the user or, alternatively, shall be placed on the container in which the device is marketed. FCC Label Location Label Location

Report No: SSP26030244-1E FCC ID: 2BU98-H002-33 Annex of Test Report Annex B. EUT Internal Photos Model: H002-33 EUT Internal View 1 EUT Internal View 2 Report No: SSP26030244-1E FCC ID: 2BU98-H002-33 Annex of Test Report EUT Internal View 3 EUT Internal View 4 PCB ANT

FCC ID: 2BU98-H002-33 RF Exposure Evaluation Limits The criteria listed in the following table shall be used to evaluate the environment impact of human exposure to radio frequency (RF) radiation as specified in 1.1307(b) Limits for Maximum Permissible Exposure (MPE) Frequency range (MHz) Electric field strength (V/m) Magnetic field strength (A/m) Power density (mW/cm2) Averaging time (minutes) (A) Limits for Occupational/Controlled Exposures 0.3–3.0 614 1.63 *(100) 6 3.0–30 1842/f 4.89/f *(900/f2) 6 30–300 61.4 0.163 1.0 6 300–1500 f/300 6 1500–100,000 5 6 (B) Limits for General Population/Uncontrolled Exposure 0.3–1.34 614 1.63 *(100) 30 1.34–30 824/f 2.19/f *(180/f2) 30 30–300 27.5 0.073 0.2 30 300–1500 f/1500 30 1500–100,000 1.0 30 f = frequency in MHz Friis transmission formula: Pd = (Pout*G)/(4*pi*r2) Where Pd = power density in mW/cm2, Pout = output power to antenna in mW; G = gain of antenna in linear scale, Pi = 3.1416; R = distance between observation point and center of the radiator in cm Pd id the limit of MPE, 1 mW/cm2. If we know the maximum gain of the antenna and the total power input to the antenna, through the calculation, we will know the distance r where the MPE limit is reached. Test Procedure Software provided by client enabled the EUT to transmit and receive data at lowest, middle and highest channel individually. Test Result of RF Exposure Evaluation BLE Mode Output power to antenna (dBm) Output power to antenna (mW) Power Density at R=20cm (mW/cm 2 ) Limit (mW/cm 2 ) Result BLE_1Mbps -4.44 0.36 0.0001 1.0 PASS Remark: Antenna gain=1.56dBi

Page 1 of 3 1. General Inf ormation 1.1 Antenna Information Manufacturer: Shenzhen Feixiang Optoelectronics Co., Ltd Address of Manufacturer: 304, Building H, Dalang Shiguan Industrial Zone, Dalang Street, Longhua District, Shenzhen, China Product Name: PCB Antenna Model Name: H002-33 Frequency Range: 2400MHz – 2500MHz Type of Antenna: PCB Antenna Antenna Gain: 1.56dBi (Max.) Impedance: 50 ohm Antenna View: Length * Width (1.1cm * 0.5cm) Page 2 of 3 2. Antenna Specification inf ormation 2.1 Gain Frequency Peak Gain (dBi) Polarity 2400MHz 1.56 Horizontal 2400MHz 0.87 Vertical 2450MHz 0.75 Horizontal 2450MHz 0.36 Vertical 2500MHz 0.41 Horizontal 2500MHz 0.23 Vertical Page 3 of 3 2.2 Radiation Pattern View

Report No: SSP26030244-1E FCC Test Report Page 1 of 33 FCC TEST REPORT FCC ID: 2BU98-H002-33 Report No. : SSP26030244-1E Applicant : Shenzhen Feixiang Optoelectronics Co., Ltd Product Name : LED String Light Model Name : H002-33 Test Standard : FCC Part 15.247 Date of Issue : 2026-03-18 Shenzhen CCUT Quality Technology Co., Ltd. 1F, Building 35, Changxing Technology Industrial Park, Yutang Street, Guangming District, Shenzhen, Guangdong, China; (Tel.:+86-755-23406590 website: www.ccuttest.com) This test report is limited to the above client company and the product model only. It may not be duplicated without prior permitted by Shenzhen CCUT Quality Technology Co., Ltd. Report No: SSP26030244-1E FCC Test Report Page 2 of 33 Test Report Basic Information Applicant..................................: Shenzhen Feixiang Optoelectronics Co., Ltd Address of Applicant...............: 304, Building H, Dalang Shiguan Industrial Zone, Dalang Street, Longhua District, Shenzhen, China Manufacturer..........................: Shenzhen Feixiang Optoelectronics Co., Ltd Address of Manufacturer........: 304, Building H, Dalang Shiguan Industrial Zone, Dalang Street, Longhua District, Shenzhen, China Product Name.........................: LED String Light Brand Name.............................: - Main Model..............................: H002-33 Series Models..........................: H002-49, H002-66, H002-99, H002-132, H002-164, H002-200, H008-33, H008-49, H008-66, H008-99, H008-132, H008-164, H008-200 Test Standard..........................: FCC Part 15 Subpart C KDB 558074 D01 15.247 Meas Guidance v05r02 ANSI C63.4-2014 ANSI C63.10-2020 Date of Test .............................: 2026-03-12 to 2026-03-17 Test Result...............................: PASS Tested By ................................: (Walker Wu) Reviewed By............................: (Lorzix Luo) Authorized Signatory............: (Lahm Peng) Note : This test report is limited to the above client company and the product model only. It may not be duplicated without prior permitted by Shenzhen CCUT Quality Technology Co., Ltd.. All test data presented in this test report is only applicable to presented test sample. Report No: SSP26030244-1E FCC Test Report Page 3 of 33 CONTENTS 1. General Information ....................................................................................................................................................5 1.1 Product Information .............................................................................................................................................5 1.2 Test Setup Information..........................................................................................................................................6 1.3 Compliance Standards ...........................................................................................................................................7 1.4 Test Facilities ........................................................................................................................................................7 1.5 List of Measurement Instruments ..........................................................................................................................8 1.6 Measurement Uncertainty .....................................................................................................................................9 2. Summary of Test Results ........................................................................................................................................... 10 3. Antenna Requirement ............................................................................................................................................... 11 3.1 Standard and Limit.............................................................................................................................................. 11 3.2 Test Result .......................................................................................................................................................... 11 4. Conducted Emissions ................................................................................................................................................ 12 4.1 Standard and Limit.............................................................................................................................................. 12 4.2 Test Procedure.................................................................................................................................................... 12 4.3 Test Data and Results .......................................................................................................................................... 13 5. Radiated Emissions ................................................................................................................................................... 16 5.1 Standard and Limit.............................................................................................................................................. 16 5.2 Test Procedure.................................................................................................................................................... 16 5.3 Test Data and Results .......................................................................................................................................... 18 6. Band-edge Emissions(Radiated) ............................................................................................................................... 22 6.1 Standard and Limit.............................................................................................................................................. 22 6.2 Test Procedure.................................................................................................................................................... 22 6.3 Test Data and Results …

Text truncated - open the document above for the full version.

Report No: SSP26030244-1E FCC ID: 2BU98-H002-33 Annex of Test Report Annex C. Test Photos Conducted Emission Test View 1 Radiated Emission Test View Below 1GHz Report No: SSP26030244-1E FCC ID: 2BU98-H002-33 Annex of Test Report Radiated Emission Test View Above 1GHz