2BU9HAW101ANRISLEEPSmart Contactless Sleep Monitor

User Manual This product is a radar device based on millimeter wave technology. It perfectly realizes non- contact, non-intrusive and uninterrupted detection of human vital signs such as respiration, heart rate and body movement. It achieves millimeter-level detection of vital signs in the human chest and abdomen area, and through technologies such as computing, big data and AI, it can conduct real-time detection of human presence, activity status (body movement index), respiratory waveform and heart rate for both lying and sitting people. It provides intelligent analysis, trend alarm and other functions. The product features easy installation and simple maintenance, and is suitable for scenarios such as home care, nursing home care, smart washrooms, and on-duty monitoring. The product appearance is shown in Figure 1. Functional Features • Cutting-edge Technology: Edge computing, big data, AI • Remote Upgrade: Remote OTA for online firmware upgrade • Easy Installation: Wall-mounted, simple to use and maintain • Anti-interference: Strong anti-interference performance, low power consumption and low radiation • Privacy Protection: Non-contact, non-intrusive, 24-hour uninterrupted monitoring • Powerful Functions: Real-time detection of human presence, activity status, heart rate and respiration, and sleep report generation through intelligent algorithms Sleep Report • Daily Report: Light/deep sleep, number of sleep episodes, number of turns, number of bed exits, sleep score • Weekly Report: Compilation of daily reports, generating in-bed duration, respiratory K- line chart, heart rate K-line chart and turn frequency chart • Monthly Report: Compilation of weekly reports, generating average sleep quality, average sleep duration, minimum sleep duration and maximum sleep duration Installation Instructions 1. Optimal Position: Select a suitable installation location and mount the product on the wall above the head of the bed. The optimal installation distance is about 80-100 cm above the bed board, as shown in Figure 2. 2. Installation and Fixation: Fix the mounting bracket on the wall with 3M adhesive tape or screws. 3. Power Supply Wiring: Insert the USB adapter and connect the TYPE-C plug. (Horizontal Position: 80-100cm - Figure 2-1; Sensing Area - Figure 2-2; Type-C Interface - Figure 3) Smart Elderly Care Case Mini Program Pairing Operations Figure 2-1 Figure 2-2 Figure 3 APP 1. Dual-network Version Description • The dual-network version supports independent network configuration and normal operation via either WiFi. 2. Adding a Device via the Mini Program 1. Enter the mini program: Scan the mini program QR code to access the Case Mini Program and log in with your account and password. 2. Add a device (as shown in the right figure): a. Click the "+" icon at the bottom right of the home page; b. Enter the device serial number (scan the device QR code or enter manually), set a device name, select the affiliated location (default or custom), and save. 3. WiFi Configuration (Bluetooth and 2.4GHz WiFi must be enabled) Click Mine > Device Configuration > Search > select the device MAC address > Network Configuration; enter the WiFi name and password, and click Confirm. The device shows online status after successful WiFi configuration. 4. Device Details Click the device icon to enter the device details page, where you can view real-time monitoring data, sleep reports, firmware version, device logs, etc. You can rename the device, perform reset and parameter settings, and share or delete the device. Indicator Light Status (Indicator Light, Type-C Interface, Reset Button, Charging Cable Buckle - Back of the Device) Indicator Light Status Description Blue light flashes after power-on Initialization for WiFi configuration Blue light flashes Flashes when configuring a new WiFi Blue light turns off Successful configuration of the new WiFi Red light flashes Device is being updated Installation Notes 1. The product should be installed at least 1.5 meters away from curtains. 2. This product can only monitor one person. For monitoring two people simultaneously, install two devices with an interval of at least 1.5 meters to avoid co-channel interference. 3. The product must be kept away from air outlets (e.g., electric fans, air conditioners, heaters) during use and avoid humid environments (e.g., areas with humidifiers, bathrooms). 4. This product is for indoor use only. Do not cover its surface, and there should be no obstacles (except bedding) between the product and the monitored person's chest cavity. 5. The product is recommended to be mounted on the wall 0.8-1 meter above the head of the bed. Ensure the installation position is stable and non-shaking; improper installation may affect data accuracy. Usage Notes 1. False alarm of "no person" when someone is present: This may occur if the human body is at the boundary of the device's detection range, shielded by metal or extra-thick objects, or in a side-lying or prone sleeping position where the subtle respiratory movements cannot be detected, leading to a temporary judgment of "no person". 2. Failure of data storage and transmission: Power failure or network disconnection of the product may cause data storage and transmission failure. If respiratory/heart rate data and sleep reports are suddenly unavailable, try re-powering the device, check WiFi availability. 3. False alarm of "person present" when no one is there: Due to the complexity of electromagnetic wave propagation and processing, the product may be affected by environmental factors in actual use. For example, vibrations from facilities such as air conditioners, fans and motors; passing animals such as cats, dogs, mice and birds; swaying mosquito nets on the bed or nearby curtains may all cause the device to misjudge the environment. (Keep dry, Do not cover, Keep stable, Keep away from air outlets) Installation Method by Wall Type Installation Method Lime Wall Latex Paint Wall Silicone Mud Wall…

Text truncated - open the document above for the full version.

Anriwell 2062 Business Center Dr Ste 125, Irvine, CA 92612, USA Attestation Statements Not Covered Entity Applicant & Not Covered Equipment To: Federal Communications Commission Date: Mar. 17, 26 7435 Oakland Mills Road, Columbia, MD 21046, USA Ref: Information Required by Section 2.911(d)(5)(i) & (ii) FCC ID: 2BU9HAW101ANRISLEEP Anriwell certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List, established pursuant to § 1.50002 of reference chapter, as an entity producing “covered” communication equipment. The equipment for which authorization is sought is not “covered” telecommunications equipment and video surveillance equipment produced by entities identified on the Commission’s Covered List that prohibited from receiving an equipment authorization pursuant to section § 2.903 of the FCC rules. Sincerely yours, Applicant Signature Printed Name: Yining Chen Title: Manager Address: 2062 Business Center Dr Ste 125, Irvine, CA 92612, USA Tel.: 949-394-7362 Email: [email protected]

Anriwell 2062 Business Center Dr Ste 125, Irvine, CA 92612, USA 1 | P a g e Attestation Statements To: Federal Communications Commission Date: Mar. 17, 26 7435 Oakland Mills Road, Columbia, MD 21046, USA Subject: Attestation of Compliance with FCC Covered List Software Requirements FCC ID: 2BU9HAW101ANRISLEEP Product Name: Smart Contactless Sleep Monitor This letter serves as an attestation that the equipment identified above ☐ is / ☒ is not (select one) "covered" software as defined under the Federal Communications Commission (FCC) Covered List requirements, as outlined in FCC 22-84 and KDB 986446. Specifically, the undersigned certifies that the equipment for which authorization is sought: 1. Does not contain cybersecurity or anti-virus software produced or provided by Kaspersky Lab, Inc. or any of its successors, assignees, parents, subsidiaries, affiliates, or any entity that has rebranded or relabeled software produced by the aforementioned entities. 2. Does not have the capability to store, run, or deliver any software identified on the FCC Covered List, including but not limited to cybersecurity and anti-virus software. To support this attestation, the appendix evaluation documentation has been prepared and is included in the certification filing. This attestation is based on a thorough evaluation of the device's design, functionality, and software environment. The undersigned affirms that the information provided is accurate and complete to the best of their knowledge. Sincerely yours, Applicant Signature Printed Name: Yining Chen Title: Manager Address: 2062 Business Center Dr Ste 125, Irvine, CA 92612, USA Tel.: 949-394-7362 Email: [email protected] Anriwell 2062 Business Center Dr Ste 125, Irvine, CA 92612, USA 2 | P a g e Evaluation regarding to the Covered List Software: Compliance Methodology Evaluation Process Results Device is Inherent compliance ☒ The Chipset(s) used is limited to run the Cybersecurity or anti-virus software. Compliance ☒ The Memory used is limited to run the Cybersecurity or anti-virus software. Compliance ☒ There is storage capacity limitation for store or install the Cybersecurity or anti-virus software. Compliance ☒ Operating system used is limited to run, install or deliver the Cybersecurity or anti-virus software. Compliance Device is not Inherent compliance ☐ Evaluation Based on Software Bill of Materials (SBoM) See attached “SBoM“ Note:The SBoM content is limited to the scope of covered list software (e.g. antivirus and cybersecurity software). ☐ Evaluation Based on Scan for Software on the device ☐ Evaluation Based on Filesystem scan ☐ Evaluation Based on Running software check

Anriwell Applicant as U.S. Agent Letter of Attestation Date: Mar. 17, 26 To: Federal Communications Commission 7435 Oakland Mills Road, Columbia, MD 21046, USA Ref: Attestation Statement – Part 2.911(d)(7) filing FCC ID: 2BU9HAW101ANRISLEEP Anriwell (“the applicant”) as required by section 2.911(d)(7), will also serve as the agent for service of process for the above referenced FCC ID. The applicant acknowledges that they will maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. The applicant further acknowledges their responsibility to inform the FCC whenever the agent information changes. Designated U.S. Agent from Applicant Company Company Name: Anriwell FRN: 0037651221 Contact Person: Yining Chen Address: 2062 Business Center Dr Ste 125, Irvine, CA 92612, USA Tel.: 949-394-7362 Email: [email protected] Sincerely yours, Signature Printed Name: Yining Chen Title: 949-394-7362 Email: [email protected]

Differences Description We Anriwell state: Product： Smart Contactless Sleep Monitor Model Name： AW-101, AnriSleep Trade Name: Anriwell FCC ID: 2BU9HAW101ANRISLEEP The electrical circuit design, layout, components used and internal wiring for above models are identical, only different in model name. Signatory Date 2026-03-17 Signature Name: Yining Chen Title: Manager Company: Anriwell Address: 2062 Business Center Dr Ste 125, Irvine, CA 92612, USA

Anriwell 2062 Business Center Dr Ste 125, Irvine, CA 92612, USA ‘ Mar. 17, 26 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Confidentiality Request for: FCC ID: 2BU9HAW101ANRISLEEP Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, we hereby request permanent confidential treatment of the exhibits accompanying this certification application as outlined below : ⎯ Block Diagram ⎯ Schematics ⎯ Operational Description The above exhibits contain trade secrets and/or proprietary information that are not publicly available and materials that the Applicant has spent considerable efforts in developing. Public disclosure of these may be harmful to the Applicant and give an unfair advantage to competitors on the market. Sincerely, Printed Name: Yining Chen Title: Manager Address: 2062 Business Center Dr Ste 125, Irvine, CA 92612, USA Tel.: 949-394-7362 Email: [email protected]

Anriwell 2062 Business Center Dr Ste 125, Irvine, CA 92612, USA Mar. 17, 26 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Agent Authorization for FCC ID: 2BU9HAW101ANRISLEEP I, the undersigned, hereby authorize (SHENZHEN STS TEST SERVICES CO.,LTD.) to act on our behalf in all matters relating to this application for equipment certification. Any act carried out by (SHENZHEN STS TEST SERVICES CO.,LTD.) shall have the same effect as our own and I acknowledge that all responsibility for complying with the terms and conditions of certification, as specified by DERYCOM CERTIFICATION SERVICES, INC., still resides with (Anriwell). We certify that we are not subject to a denial of federal benefits that includes FCC benefits pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. §862, and that no party to the application, as defined in 47 CFR §1.2002(b), is subject to a denial of federal benefits that includes FCC benefits pursuant to that section. Sincerely, Printed Name: Yining Chen Title: Manager Address: 2062 Business Center Dr Ste 125, Irvine, CA 92612, USA Tel.: 949-394-7362 Email: [email protected]

Page 1 of 6 Report No.: STS2512043 APPENDIX-PHOTOGRAPHS OF EUT CONSTRUCTIONAL DETAILS Photo 1 Photo 2 Page 2 of 6 Report No.: STS2512043 Photo 3 Photo 4 Page 3 of 6 Report No.: STS2512043 Photo 5 Photo 6 Page 4 of 6 Report No.: STS2512043 Photo 7 Photo 8 Page 5 of 6 Report No.: STS2512043 Photo 9 Photo 10 Page 6 of 6 Report No.: STS2512043 Photo 11

Label 10mm*2mm The label is engraved on the shell FCC ID: 2BU9HAW101ANRISLEEP

Page 1 of 6 Report No.: STS2512043 APPENDIX-PHOTOGRAPHS OF EUT CONSTRUCTIONAL DETAILS Photo 1 Photo 2 Page 2 of 6 Report No.: STS2512043 Photo 3 Photo 4 BT/WiFi Antenna Page 3 of 6 Report No.: STS2512043 Photo 5 Photo 6 Page 4 of 6 Report No.: STS2512043 Photo 7 Photo 8 Page 5 of 6 Report No.: STS2512043 Photo 9 Photo 10 Radar Antenna Page 6 of 6 Report No.: STS2512043 Photo 11

The test results presented in this report relate only to the object tested. This report shall not be reproduced, except in full, without the written approval of the Shenzhen STS Test Services Co., Ltd. MPE Report Report No.:STS2512043H01 Issued for Anriwell 2062 Business Center Dr Ste 125, Irvine, CA 92612, USA Product Name: Smart Contactless Sleep Monitor Brand Name: Anriwell Model Name: AW-101 Series Model(s): AnriSleep FCC ID: 2BU9HAW101ANRISLEEP Test Standards: FCC 47CFR §2.1091 Page 2 of 9 Report No.:STS2512043H01 TEST REPORT Applicant’s Name ................. : Anriwell Address ................................. : 2062 Business Center Dr Ste 125, Irvine, CA 92612, USA Manufacturer's Name ........... : Anriwell Address ................................. : 2062 Business Center Dr Ste 125, Irvine, CA 92612, USA Product Description Product Name ........................ : Smart Contactless Sleep Monitor Brand ................................... : Anriwell Model Number ....................... : .. : AW-101 Series Model(s) ...................... : AnriSleep Standards ............................. : FCC 47CFR §2.1091 447498 D04 Interim General RF Exposure Guidance v01 The test results presented in this report relate only to the object tested. This report shall not be reproduced, except in full, without the written approval of the Shenzhen STS Test Services Co., Ltd. Date of Test ........................................... : Date of receipt of test item ...................... : 06 Dec. 2025 Date (s) of performance of tests ............. : 06 Dec. 2025~31 Jan. 2026 Date of Issue .......................................... : 31 Jan. 2026 Test Result .............................................. : Pass Testing Engineer : (Aaron Bu) Technical Manager : (Skylar Li) Authorized Signatory : (Bovey Yang) Page 3 of 9 Report No.:STS2512043H01 TABLE OF CONTENTS 1. GENERAL INFORMATION 5 1.1 GENERAL DESCRIPTION OF THE EUT 5 1.2 TEST FACTORY 5 2. FCC 47CFR §2.1091 REQUIREMENT 6 2.1 TEST STANDARDS 6 2.2 LIMIT 6 2.3 TEST RESULT 9 Page 4 of 9 Report No.:STS2512043H01 Revision History Rev. Issue Date Report No. Effect Page Contents 00 31 Jan. 2026 STS2512043H01 ALL Initial Issue Page 5 of 9 Report No.:STS2512043H01 1. GENERAL INFORMATION 1.1 GENERAL DESCRIPTION OF THE EUT Product Name Smart Contactless Sleep Monitor Brand Anriwell Model Name AW-101 Series Model(s) AnriSleep Model Difference Only different in model name Product Description The EUT is Smart Contactless Sleep Monitor Operation Frequency: Bluetooth: 2402~2480 MHz 2.4G WLAM: 802.11b/g/n 20: 2412~2462 MHz 802.11n40:2422~2452MHz Radar: 57-64GHz Modulation Type: BLE: GFSK BT BR(1Mbps): GFSK BT EDR(2Mbps): π/4-DQPSK BT EDR(3Mbps): 8DPSK 2.4G WLAM: 802.11b(DSSS):CCK,DQPSK,DBPSK 802.11g(OFDM):BPSK,QPSK,16-QAM,64-QAM 802.11n(OFDM):BPSK,QPSK,16-QAM,64-QAM Radar:FMCW Antenna gain: BLE/BT/2.4G WLAM : 4.3dBi Radar: 5dBi Antenna Designation: BLE/BT/2.4G WLAM :SMD patch antenna Radar: AOP antenna Power Rating Input: USB Type-C 5V1000mA Adapter Model: HP 05010M Brand: N/A Input: AC100-240V 50/60Hz 0.3A Output: DC5V ⎓ 1000mA Battery N/A Hardware Version V1.0 Software Version 42-18 1.2 TEST FACTORY SHENZHEN STS TEST SERVICES CO., LTD Add. : 101, Building B, Zhuoke Science Park, No.190 Chongqing Road, ZhanChengShequ, Fuhai Sub-District, Bao’an District, Shenzhen, Guang Dong, China FCC test Firm Registration Number: 625569 IC test Firm Registration Number: 12108A A2LA Certificate No.: 4338.01 Page 6 of 9 Report No.:STS2512043H01 2. FCC 47CFR §2.1091 REQUIREMENT 2.1 TEST STANDARDS Follow the maximum permissible exposure (MPE) limits specified in 447498 D04 Interim General Radio Frequency Exposure Guidelines v01. The gain of the antenna used in the product was extracted from the supplied antenna data sheet and the maximum total power input to the antenna was also measured. Calculate the distance from the product to the MPE limit by the formula. 2.2 LIMIT For single RF sources (i.e., any single fixed RF source, mobile device, or portable device, as defined in paragraph (b)(2) of this section): A single RF source is exempt if: (A) The available maximum time-averaged power is no more than 1 mW, regardless of separation distance. This exemption may not be used in conjunction with other exemption criteria other than those in paragraph (b)(3)(ii)(A) of Part 1.1307. Medical implant devices may only use this exemption and that in paragraph (b)(3)(ii)(A); (B) Or the available maximum time-averaged power or effective radiated power (ERP), whichever is greater, is less than or equal to the threshold Pth (mW) described in the following formula. This method shall only be used at separation distances (cm) from 0.5 centimeters to 40 centimeters and at frequencies from 0.3 GHz to 6 GHz (inclusive). Pth is given by: Page 7 of 9 Report No.:STS2512043H01 (C) Or using below table and the minimum separation distance (R in meters) from the body of a nearby person for the frequency (f in MHz) at which the source operates, the ERP (watts) is no more than the calculated value prescribed for that frequency. For the exemption in Table 1 to apply, R must be at least λ/2π, where λ is the free-space operating wavelength in meters. If the ERP of a single RF source is not easily obtained, then the available maximum time-averaged power may be used in lieu of ERP if the physical dimensions of the radiating structure(s) do not exceed the electrical length of λ/4 or if the antenna gain is less than that of a half-wave dipole (1.64 linear value). RF Source frequency (MHz) Threshold ERP(watts) 0.3-1.34 1,920 R 2 . 1.34-30 3,450 R 2 /f 2 . 30-300 3.83 R 2 . 300-1,500 0.0128 R 2 f. 1,500-100,000 19.2R 2 . Page 8 of 9 Report No.:STS2512043H01 For multiple RF sources: Multiple RF sources are exempt if: (A) The available maximum time-averaged power of each source is no more than 1 mW and there is a separation distance of two centimeters between any portion of a radiating structure operating and the nearest port…

Text truncated - open the document above for the full version.

CA-C03Specification CA-C03_V02 1 SMDAntennaSpecificat- ion TM CrossAirSMDantennaseries ComplieswithRoHSregulations PN:CA-C03 2.4GHzISMBandAntenna CA-C03Specification CA-C03_V02 2 Characteristic 1. 3 AsmallSMDpatchantennawithasizeofonly5.5X2.0X1.0mm. 2.Lowenergylossandhighantennaefficiency. 3.Ithashighstabilityundertheconditionoftemperatureandhumiditychange. Apply 1.2.4GHzISMBandAntennaApplications 2.Bluetooth,ZigBee,wirelessapplications,smarthomeapplications,etc. 3.WIFI(2.4Gonly) structure Size 1、AntennaFeedEnd 2、FeedIdentificationMark 3、WeldedFixedEndofAntenna Threeviews Symbol Size（mm） L 5.5±0.2 w2.0±0.1 T 1.0±0.1 a0.5±0.1 CA-C03Specification CA-C03_V02 3 ElectricalCharacter CA-C03Specification WorkingFrequencyRange 2450±50MHz Initialfrequencyband(GHz) 2.7GHz Bandwidth >100MHz Impedance 50Ω Gain(dBi) 4.3（peak） Standing-waveratioVSWR <2 OperatingTemperature -40°C~+95°C PowerCapacity 3W The2.4Gantennaoperatingfrequencyisadjustedusingimpedancematchingcomponents. DesignofAntennaPadandTracing Designdimensiondrawing CA-C03Specification CA-C03_V02 4 Antennatestontestboard(boardthickness1.0 mm) Matcheddevicevalue Series1 0Ω Shunt1 3nh Series2 0Ω CA-C03Specification CA-C03_V02 5 EfficiencyandRadiationDiagram Theperformancemetricsincludingefficiency,radiationpattern,andgainarederivedfromthetest boarddesign.ThetestdatafortheCA-C03antenna'sspecificationsandcharacteristicsare AntennaS11characteristics AntennaVSWRcharacteristics CA-C03Specification CA-C03_V02 6 TheresultswereobtainedbasedonthetestPCBdimensionsandthetestorientationshowninthe figurebelow.ThefollowingdatawereobtainedfromETS3Dmicrowaveanechoicchambertests. Gainandefficiency Bandwidth2.4G-2.5GHz PeakGain 4.3dBi Averagegainwithinband AverageGainacrosstheband 4.1dBi Bandgainrange GainRangeacrosstheband 3.9dBi~4.3dBi PeakEfficiency 81.7% Averageefficiencywithinband AverageEfficiencyacrosstheband 80.2% Bandefficiencyrange EfficiencyRangeacrosstheband 78.6%~81.7% Theta @2.45 GHz Z Y X CA-C03Specification CA-C03_V02 7 Phi @2.45 GHz Total @2.45 GHz WeldingCondition Thefollowingfigureshowsthetypicalweldspecificationsforreliableandnon-destructivetesting. CA-C03Specification CA-C03_V02 8 pack Plasticcarrierspecification(unit:mm) Index Ao Bo ΦD T W Dimension(mm) 3.0±0.16.0±0.11.55±0.051.6±0.116±0.2 Index E F Po P1 P2 Dimension(mm) 1.75±0.17.0±0.14.0±0.14.0±0.12.0±0.1 SpoolSize CA-C03Specification CA-C03_V02 9 Index A B C Dimension(mm)33010013.5 Standardquantity:3000PCSpertray. StorageEnvironment Theproductmustmeetthefollowingconditionswhenstored: temperature：-10°C~+40°C Humidity:30%to70%relativehumidity Theproductshouldbeplacedinalocationfreefromcorrosivegasessuchassulfur. Chlorineoracidsmaycauseelectrodeoxidation,leadingtoreducedweldability. Theproductshouldbestoredinatoolboxandprotectedfrommoistureanddust. Theproductshouldbestoredinthewarehouseandavoidheat,vibration,directsunlight. Theproductshouldbestoredunderclosedconditions.

The test results presented in this report relate only to the object tested. This report shall not be reproduced, except in full, without the written approval of the Shenzhen STS Test Services Co., Ltd. Radio Test Report Report No.:STS2512043W01 Issued for Anriwell 2062 Business Center Dr Ste 125, Irvine, CA 92612, USA Product Name: Smart Contactless Sleep Monitor Brand Name: Anriwell Model Name: AW-101 Series Model(s): AnriSleep FCC ID: 2BU9HAW101ANRISLEEP Test Standards: FCC Part15.247 Page 2 of 88 Report No.: STS2512043W01 TEST REPORT Applicant’s Name ................. : Anriwell Address ................................. : 2062 Business Center Dr Ste 125, Irvine, CA 92612, USA Manufacturer's Name ........... : Anriwell Address ................................. : 2062 Business Center Dr Ste 125, Irvine, CA 92612, USA Product Description Product Name ........................ : Smart Contactless Sleep Monitor Brand Name ........................... : Anriwell Model Name .......................... : AW-101 Series Model(s) .................... : AnriSleep Standards ............................. : FCC Part 15.247 Test Procedure........................: ANSI C63.10-2020 This device described above has been tested by STS, the test results show that the equipment under test (EUT) is in compliance with the FCC requirements. And it is applicable only to the tested sample identified in the report. The test results presented in this report relate only to the object tested. This report shall not be reproduced, except in full, without the written approval of the Shenzhen STS Test Services Co., Ltd. Date of Test ........................................... : Date of receipt of test item ...................... : 06 Dec. 2025 Date (s) of performance of tests ............. : 06 Dec. 2025~08 Jan. 2025 Date of Issue .......................................... : 08 Jan. 2025 Test Result .............................................. : Pass Testing Engineer : (Aaron Bu) Technical Manager : (Skylar Li) Authorized Signatory : (Bovey Yang) Page 3 of 88 Report No.: STS2512043W01 Table of Contents Page 1. SUMMARY OF TEST RESULTS 6 1.1 TEST FACTORY 7 1.2 MEASUREMENT UNCERTAINTY 7 2. GENERAL INFORMATION 8 2.1 GENERAL DESCRIPTION OF THE EUT 8 2.2 DESCRIPTION OF THE TEST MODES 10 2.3 TEST SOFTWARE AND POWER LEVEL 11 2.4 BLOCK DIAGRAM SHOWING THE CONFIGURATION OF SYSTEM TESTED 12 2.5 DESCRIPTION OF NECESSARY ACCESSORIES AND SUPPORT UNITS 13 2.6 EQUIPMENTS LIST FOR ALL TEST ITEMS 14 3. EMC EMISSION TEST 15 3.1 CONDUCTED EMISSION MEASUREMENT 15 3.2 RADIATED EMISSION MEASUREMENT 19 4. DUTY CYCLE 31 4.1 TEST STANDARD 31 4.2 TEST PROCEDURE 31 4.3 DEVIATION FROM STANDARD 31 4.4 TEST SETUP 31 4.6 TEST RESULTS 31 5. CONDUCTED SPURIOUS & BAND EDGE EMISSION 32 5.1 LIMIT 32 5.2 TEST PROCEDURE 32 5.3 DEVIATION FROM STANDARD 32 5.4 TEST SETUP 32 5.5 EUT OPERATION CONDITIONS 32 5.6 TEST RESULTS 32 6. POWER SPECTRAL DENSITY TEST 33 6.1 LIMIT 33 6.2 TEST PROCEDURE 33 6.3 DEVIATION FROM STANDARD 33 6.4 TEST SETUP 33 6.5 EUT OPERATION CONDITIONS 33 6.6 TEST RESULTS 33 Page 4 of 88 Report No.: STS2512043W01 Table of Contents Page 7. BANDWIDTH TEST 34 7.1 LIMIT 34 7.2 TEST PROCEDURE 34 7.3 DEVIATION FROM STANDARD 34 7.4 TEST SETUP 34 7.5 EUT OPERATION CONDITIONS 34 7.6 TEST RESULTS 34 8. PEAK OUTPUT POWER TEST 35 7.1 LIMIT 35 8.2 TEST PROCEDURE 35 8.3 DEVIATION FROM STANDARD 35 8.4 TEST SETUP 35 8.5 EUT OPERATION CONDITIONS 35 8.6 TEST RESULTS 35 9. ANTENNA REQUIREMENT 36 9.1 STANDARD REQUIREMENT 36 9.2 EUT ANTENNA 36 APPENDIX 1-TEST DATA 37 DUTY CYCLE 37 MAXIMUM PEAK CONDUCTED OUTPUT POWER 44 -6DB BANDWIDTH 45 OCCUPIED CHANNEL BANDWIDTH 52 MAXIMUM POWER SPECTRAL DENSITY LEVEL 59 BAND EDGE 66 CONDUCTED RF SPURIOUS EMISSION 75 APPENDIX 2-PHOTOS OF TEST SETUP 88 Page 5 of 88 Report No.: STS2512043W01 Revision History Rev. Issue Date Report No. Effect Page Contents 00 08 Jan. 2025 STS2512043W01 ALL Initial Issue Page 6 of 88 Report No.: STS2512043W01 1. SUMMARY OF TEST RESULTS Test procedures according to the technical standards: KDB 558074 D01 15.247 Meas Guidance v05r02. FCC Part 15.247,Subpart C Standard Section Test Item Judgment Remark 15.207 Conducted Emission PASS -- 15.247 (a)(2) 6dB Bandwidth PASS -- 15.247 (b)(3) Output Power PASS -- 15.209 Radiated Spurious Emission PASS -- 15.247 (d) Conducted Spurious & Band Edge Emission PASS -- 15.247 (e) Power Spectral Density PASS -- 15.205 Restricted Band Edge Emission PASS -- Part 15.247(d)/ part 15.209(a) Band Edge Emission PASS -- 15.203 Antenna Requirement PASS -- NOTE: (1) ‘N/A’ denotes test is not applicable in this Test Report. (2) All tests are according to ANSI C63.10-2020. Page 7 of 88 Report No.: STS2512043W01 1.1 TEST FACTORY SHENZHEN STS TEST SERVICES CO., LTD Add. : 101, Building B, Zhuoke Science Park, No.190 Chongqing Road, ZhanChengShequ, Fuhai Sub-District, Bao’an District, Shenzhen, Guang Dong, China FCC test Firm Registration Number: 625569 IC test Firm Registration Number: 12108A A2LA Certificate No.: 4338.01 1.2 MEASUREMENT UNCERTAINTY The reported uncertainty of measurement y ±U, where expended uncertainty U is based on a standard uncertainty multiplied by a coverage factor of k=2, providing a level of confidence of approximately 95 %. No. Item Uncertainty 1 RF output power, conducted ±0.751dB 2 Unwanted Emissions, conducted ±2.888dB 3 All emissions, radiated 9K-30MHz ±2.48dB 4 All emissions, radiated 30M-1GHz ±2.52dB 5 All emissions, radiated 1G-18GHz ±3.48dB 6 All emissions, radiated>18GHz ±4.18dB 7 Conducted Emission (9KHz-150KHz) ±2.48dB 8 Conducted Emission (150KHz-30MHz) ±2.52dB 9 Occupied Channel Bandwidth ±3.6% 10 Power Spectral Density, conducted ±1.214dB 11 Duty Cycle ±3.2% Page 8 of 88 Report No.: STS2512043W01 2. GENERAL INFORMATION 2.1 GENERAL DESCRIPTION OF THE EUT Product Name Smart Contactless Sleep Monitor Brand Name Anriwell Model Name AW-101 Series Model(s) AnriSleep Model Difference Only different in model name Product Description The EUT is a Smart …

Text truncated - open the document above for the full version.

The test results presented in this report relate only to the object tested. This report shall not be reproduced, except in full, without the written approval of the Shenzhen STS Test Services Co., Ltd. Radio Test Report Report No.:STS2512043W02 Issued for Anriwell 2062 Business Center Dr Ste 125, Irvine, CA 92612, USA Product Name: Smart Contactless Sleep Monitor Brand Name: Anriwell Model Name: AW-101 Series Model(s): AnriSleep FCC ID: 2BU9HAW101ANRISLEEP Test Standards: FCC Part15.247 Page 2 of 59 Report No.: STS2512043W02 TEST REPORT Applicant’s Name ................. : Anriwell Address ................................. : 2062 Business Center Dr Ste 125, Irvine, CA 92612, USA Manufacturer's Name .......... : Anriwell Address ................................. : 2062 Business Center…

Text truncated - open the document above for the full version.