2BUD7-M008Children video intercom

Antenna Talk button Type-C Port Camera Volume + Power Switch MIC jack Alt/Screen SwitchSend Button for Avatars Switch between videocall and voice call Speaker hole Volume - Display OFF ON 125*55*24mm 1000 6、Smiley button: Press the smiley face button to send cartoon stickers. There are four sticker options available. 7. Video/Audio Button: Default video intercom, with the option to freely switch between video and audio intercom. 3. Image mode switch key “M”. This device features four modes; press and hold for 2 seconds to cycle through them. Press the “M” key briefly to switch between voice-changing modes. There are four voice-changing modes in total. 8 9 10 Antena Botão do intercom unicador Tipo C porta câmara Aumente o volume Interruptor de alimentação Conector MIC buraco do chifre Alternar Alt/Ecrã Botão Enviar paraautocolantes fotográficosAlternar entre videochamada echamada de voz Volume reduzido ecrã de visualização OFF ON Ecrã Pixéis CMOS Capacidade da bateria Idioma Interface USB Temperatura de funcionamento Temperatura de armazenamento Fonte de alimentação Dimensões do produto IPS de 2,0 polegadas 30 W 3,7 V 1000 mAh Chinês Tipo C -20 °C a 60 °C -30 °C a 70 °C 5 V/1,0 A 125 × 55 × 24 mm 6. Botão Smiley: Pressione o botão smiley para enviar autocolantes de desenhos animados. Há quatro autocolantes à escolha. 8. Função de ligar/desligar o produto e desligamento automático Ao ligar, este produto entra no modo operacional; ele permanece ativo independentemente do uso. Quando a bateria estiver fraca, o produto desligará automaticamente. Para interromper a operação, coloque o interruptor na posição “OFF”. Para reiniciar o produto, basta colocar o interruptor primeiro na posição “OFF” e, em seguida, na posição “ON” para operação normal. 9. Emparelhamento do produto e método de conexão: Este produto utiliza um modo de transmissão e conexão Wi-Fi de 2,4 GHz. Cada embalagem contém dois walkie-talkies que foram pré-emparelhados. Estas duas unidades não podem ser conectadas a outros dispositivos. Caso sejam adquiridos vários conjuntos, eles devem ser conectados em uma base individual por conjunto; vários produtos não podem ser conectados entre si simultaneamente. 10. Precauções: a. Este produto tem melhor desempenho quando usado ao ar livre. b. Esta unidade não é à prova de água. c. A distância ideal de operação em ambientes internos é determinada garantindo que a imagem permaneça suave e sem atrasos. 7. Botão Vídeo/Áudio: A configuração padrão é o intercomunicador com vídeo, mas pode alternar livremente entre o intercomunicador com vídeo e o intercomunicador com áudio. V. Especificações do produto Vídeo-porteiro para crianças Manual de Instruções I. Descrição da aparência e funçãoII. Função de ligar/desligar 1. Ao sair da fábrica, o interruptor de alimentação está na posição «OFF». 2. Deslize o interruptor de alimentação para «ON» para ativar a unidade automaticamente. Conforme mostrado na Figura A, a área do visor apresentará a imagem capturada pela câmara desta unidade. Quando a unidade emparelhada for ativada, a área do visor B mostrará a imagem da outra unidade. 3. Ao utilizar este produto pela primeira vez, certifique-se de que está totalmente carregado. III. Indicador de carga 1. Use o cabo de carregamento fornecido com este dispositivo para conectá-lo ao carregador. A luz indicadora de energia acenderá em vermelho durante o carregamento. Ao atingir a carga completa, a luz indicadora de carregamento se apagará automaticamente. 2. Especificações do carregador: 5V/1A. Estado desligadoEstado ligado IV . Descrição funcional 1. Coloque a alimentação na posição «ON»; a unidade ligar-se-á automaticamente e exibirá a imagem da câmara local. Quando o intercomunicador remoto estiver ligado, ambas as unidades ligar-se-ão automaticamente e exibirão a imagem uma da outra. 2. Pressione e mantenha pressionada a tecla “ ” para iniciar o intercomunicador de voz. Este dispositivo opera num sistema de transmissão de canal unidirecional. Somente quando a parte que está a falar soltar a tecla do intercomunicador é que a outra parte poderá pressionar e manter pressionada a tecla do intercomunicador para transmitir a sua voz. 3. Tecla de mudança do modo de imagem «M» Este dispositivo possui quatro modos; mantenha premido durante 2 segundos para alternar entre eles. 5. Função de alteração de voz: Pressione brevemente a tecla «M» para alternar entre os modos de alteração de voz. Existem quatro modos de alteração de voz no total. 4. Ajuste do volume: Pressione brevemente o botão «+» para aumentar o volume. Pressione brevemente o botão «-» para diminuir o volume. Própria Imagem Região Outro Imagem Região Própria Imagem Região Outro Imagem Região Outro Imagem Região Própria Imagem Região PtPtPtPtPtPtPt FCC Warning This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a …

Text truncated - open the document above for the full version.

Rev 1/26/2023 (ShenZhen Milibao Technology Co., Ltd) Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: January 19, 2026 Ref: Attestation Statements Part 2.911(d)(5)(i) Filing FCC ID: 2BUD7-M008 [ShenZhen Milibao Technology Co., Ltd] certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. [ShenZhen Milibao Technology Co., Ltd] certifies that the equipment for which authorization is sought does not include cybersecurity or anti-virus software produced or provided by Kaspersky Lab, Inc. or any of its successors and assignees, including equipment with integrated Kaspersky Lab, Inc. (or any of its successors and assignees) cybersecurity or anti-virus software pursuant to DA-24-886 and KDB 986446 D01 Covered Equipment Guidance section B(2a). Device is inherently compliant based on hardware limitations or software controls. or A Software Bill of Materials (SBOM) is provided to the TCB for review, and The end-user or third parties cannot install additional software on this device. Sincerely, (Applicant signature) (Applicant printed name) Yuqiao Chen Rev 1/26/2023 (ShenZhen Milibao Technology Co., Ltd) Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: January 19, 2026 Ref: Attestation Statements Part 2.911(d)(5)(ii) Filing FCC ID: 2BUD7-M008 [ShenZhen Milibao Technology Co., Ltd] certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing “covered” equipment. Sincerely, (Applicant signature) (Applicant printed name) Yuqiao Chen

ShenZhen Milibao Technology Co., Ltd U.S. Agent Letter of Attestation To: Federal Communications Commission 7435 Oakland Mills Road, Columbia, MD 21046, USA Date: January 19, 2026 Ref: Attestation Statement – Part 2.911(d)(7) filing FCC ID: 2BUD7-M008 ShenZhen Milibao Technology Co., Ltd(“the applicant”) certifies that, as of the date of the filing of the application, CLF Import and Export Limited (“the agent”) is our designated U.S. agent for service of process for the above reference FCC ID. The applicant accepts to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. The applicant further acknowledges it is our responsibility to inform the FCC whenever the agent information changes. CLF Import and Export Limited ("the agent) understand it is the agent's obligation to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and email address. Designated U.S. Agent Company Name: CLF Import and Export Limited FRN: 0033489683 Address: 1312 17th Street #692, Denver, CO 80202, United States Signature: Contact Person: David Chen Tel: +1 949 254 2565 Email: [email protected] Applicant Company Name: ShenZhen Milibao Technology Co., Ltd FRN: 0037865698 Address: Room 501, No. 13, Lane 3, Jianmin Community, Nanling Village Community, Nanwan Subdistrict, Longgang District, Shenzhen China Signature: Contact Person: Yuqiao Chen Tel: +86 16675411368 Email: [email protected]

ShenZhen Milibao Technology Co., Ltd Date: January 19, 2026 Product Model Number: M008, M008-1, M008-2, M008-3, M008-6 FCC ID: 2BUD7-M008 To whom it may concern, Re: Product Certification Representative Authorization Letter We authorize QAI Laboratories Ltd. 3980 North Fraser Way, Burnaby B.C. Canada V5J 5K5 to act on our behalf on all matters concerning the above named equipment. This shall include the following: • Testing • Approval applications and procedures We declare that QAI Laboratories Ltd. is allowed to forward all information related to the approval project to the applied certification body and to the notification entities and to discuss any issues concerning the approval application. Any and all acts carried out by QAI Laboratories Ltd. on our behalf shall have the same effect as acts of our own. Signature： By: Yuqiao Chen Title: Manager Email: [email protected] Telephone: +86 16675411368 On behalf of: ShenZhen Milibao Technology Co., Ltd

ShenZhen Milibao Technology Co., Ltd Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: January 19, 2026 Subject; Request for Confidentiality FCC ID: 2BUD7-M008 To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description Tune-up Procedure Software Security Requirements for UNII devices In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s); External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: Yuqiao Chen Title: Manager

深圳旭航通讯科技有限公司 Shenzhen Xuhang Communication 客户 CUSTOMER 客户料号 CUSTOMERNO. 供方品名 PART NAME WIFI ANT 规格名称 SUPPLIERNO. 客户确认 CUSTOMERAPPROVEDBY 检验 APPROVAL 审核 CHIEF 批准 SUPERVISOR 设计 DESIGN 审核 CHECK 批准 APPROVAL LuoRobertS HANG Date:June 18, 2025 DIRECTORY NO.ContentsNumber ofPage PageCode 1SpecCover11 2DIRECTORY12 3TestReports13 4MatchingCircuits14 5DRAWING15 6TestData36-9 7 Antennaassemblyposition 110 电性测试报告 TEST REPORTS 频率 Frequency WIFI(2400~2500MHz) 阻抗 Impedance 50 0hm Nominal 驻波比 V.S.W.R ＜2.0 回波损耗 ReturnLoss -10dB Max 辐射 Radiation Omni-directional 增益 Gain(Peak) 2.62 dBi 极化方式 Polarization Linear,Vertical 功率 AdmittedPower 1W 连接器 Connector PhysicalProperties Antenna Type Integral Antenna 线材类型 Cable Type O.D. 1.13 mm 工作温度 OperatingTemp. -10-+60°C 存储温度 StorageTemp. -10-+70°C 线材颜色 Cable Color Black 匹配电路 MatchingCircuits The originalmatchingcircuithas not been modified DRAWING unit：mm 测试数据 Test Data 3D

Report No: SSP25120608-1E FCC ID: 2BUD7-M008 Annex of Test Report Annex A. EUT External Photos Model: M008 EUT View 1 EUT View 2 Report No: SSP25120608-1E FCC ID: 2BUD7-M008 Annex of Test Report EUT View 3 EUT View 4 Report No: SSP25120608-1E FCC ID: 2BUD7-M008 Annex of Test Report EUT View 5 EUT View 6 Report No: SSP25120608-1E FCC ID: 2BUD7-M008 Annex of Test Report EUT View 7 EUT View 8 Report No: SSP25120608-1E FCC ID: 2BUD7-M008 Annex of Test Report EUT View 9 EUT View 10

Report No: SSP25120608-1E FCC ID: 2BUD7-M008 Annex of Test Report Annex D. Label and Information FCC Label Sample Label Size: 3cm*1.5cm FCC Label Specifications Text is Black in color and is justified. Labels are printed in indelible ink on permanent adhesive backing or silk-screened onto the EUT or shall be affixed at a conspicuous location on the EUT. Where the EUT is constructed in two or more sections connected by wires and marketed together, the above statement is required to be affixed only to the main control unit. When the EUT is so small or for such use that it is not practicable to place the statement on it, the above information shall be placed in a prominent location in the instruction manual or pamphlet supplied to the user or, alternatively, shall be placed on the container in which the device is marketed. FCC Label Location Label Location

Report No: SSP25120608-1E FCC ID: 2BUD7-M008 Annex of Test Report Annex B. EUT Internal Photos EUT Internal View 1 EUT Internal View 2 Report No: SSP25120608-1E FCC ID: 2BUD7-M008 Annex of Test Report EUT Internal View 3 EUT Internal View 4 Report No: SSP25120608-1E FCC ID: 2BUD7-M008 Annex of Test Report EUT Internal View 5 EUT Internal View 6 Integral Antenna

FCC ID: 2BUD7-M008 RF Exposure Evaluation According to KDB 447498 D01 General RF Exposure Guidance v06 and part 2.1093，Unless specifically required by the published RF exposure KDB procedures, standalone 1-g head or body and 10-g extremity SAR evaluation for general population exposure conditions, by measurement or numerical simulation, is not required when the corresponding SAR Test Exclusion Threshold condition(s), listed below, is (are) satisfied. For 100 MHz to 6 GHz and test separation distances ≤ 50 mm, the 1-g and 10-g SAR test exclusion thresholds are determined by the following: [(max. power of channel, including tune-up tolerance, mW) / (min. test separation distance, mm)] · [√f(GHz)] ≤ 3.0 for 1-g SAR, and ≤ 7.5 for 10-g extremity SAR, where f(GHz) is the RF channel transmit frequency in GHz Power and distance are rounded to the nearest mW and mm before calculation The result is rounded to one decimal place for comparison Here, The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. For 2.4GWiFi Max Conducted Power(dBm) Tune-up Power(dBm) Max Tune-up Power(dBm) Max Power(mW) Frequency(MHz) Min. distance(mm) Calc. thresholds limit 7.27 7(±1) 8 6.31 2412 5 1.95996 3.0 So a SAR test is not required

Report No: SSP25120608-1E FCC Test Report Page 1 of 50 FCC TEST REPORT FCC ID: 2BUD7-M008 Report No. : SSP25120608-1E Applicant : ShenZhen Milibao Technology Co., Ltd Product Name : Children video intercom Model Name : M008 Test Standard : FCC Part 15.247 Date of Issue : 2026-01-17 Shenzhen CCUT Quality Technology Co., Ltd. 1F, Building 35, Changxing Technology Industrial Park, Yutang Street, Guangming District, Shenzhen, Guangdong, China; (Tel.:+86-755-23406590 website: www.ccuttest.com) This test report is limited to the above client company and the product model only. It may not be duplicated without prior permitted by Shenzhen CCUT Quality Technology Co., Ltd. Report No: SSP25120608-1E FCC Test Report Page 2 of 50 Test Report Basic Information Applicant..................................: ShenZhen Milibao Technology Co., Ltd Address of Applicant...............: Room 501, No. 13, Lane 3, Jianmin Community, Nanling Village Community, Nanwan Subdistrict, Longgang District, Shenzhen China Manufacturer..........................: ShenZhen Milibao Technology Co., Ltd Address of Manufacturer........: Room 501, No. 13, Lane 3, Jianmin Community, Nanling Village Community, Nanwan Subdistrict, Longgang District, Shenzhen China Product Name.........................: Children video intercom Brand Name.............................: - Main Model..............................: M008 Series Models..........................: M008-1, M008-2, M008-3, M008-6 Test Standard..........................: FCC Part 15 Subpart C KDB 558074 D01 15.247 Meas Guidance v05r02 ANSI C63.4-2014 ANSI C63.10-2020 Date of Test .............................: 2025-12-26 to 2026-01-17 Test Result...............................: PASS Tested By ................................: (Colin Chen) Reviewed By............................: (Lorzix Luo) Authorized Signatory............: (Lahm Peng) Note : This test report is limited to the above client company and the product model only. It may not be duplicated without prior permitted by Shenzhen CCUT Quality Technology Co., Ltd.. All test data presented in this test report is only applicable to presented test sample. Report No: SSP25120608-1E FCC Test Report Page 3 of 50 CONTENTS 1. General Information ....................................................................................................................................................5 1.1 Product Information .............................................................................................................................................5 1.2 Test Setup Information..........................................................................................................................................6 1.3 Compliance Standards ...........................................................................................................................................7 1.4 Test Facilities ........................................................................................................................................................7 1.5 List of Measurement Instruments ..........................................................................................................................8 1.6 Measurement Uncertainty .....................................................................................................................................9 2. Summary of Test Results ........................................................................................................................................... 10 3. Antenna Requirement ............................................................................................................................................... 11 3.1 Standard and Limit.............................................................................................................................................. 11 3.2 Test Result .......................................................................................................................................................... 11 4. Conducted Emissions ................................................................................................................................................ 12 4.1 Standard and Limit.............................................................................................................................................. 12 4.2 Test Procedure.................................................................................................................................................... 12 4.3 Test Data and Results .......................................................................................................................................... 13 5. Radiated Emissions ................................................................................................................................................... 16 5.1 Standard and Limit.............................................................................................................................................. 16 5.2 Test Procedure.................................................................................................................................................... 16 5.3 Test Data and Results .......................................................................................................................................... 18 6. Band-edge Emissions(Radiated) ............................................................................................................................... 22 6.1 Standard and Limit.............................................................................................................................................. 22 6.2 Test Procedure.................................................................................................................................................... 22 6.3 Test Data and Results ...............................................…

Text truncated - open the document above for the full version.

Report No: SSP25120608-1E FCC ID: 2BUD7-M008 Annex of Test Report Annex C. Test Photos Conducted Emission Test View 1 Radiated Emission Test View Below 1GHz Report No: SSP25120608-1E FCC ID: 2BUD7-M008 Annex of Test Report Radiated Emission Test View Above 1GHz