2BUDS-HC15-SEHyperCube15-SE

HyperCube SE User’s Manual DOn’t Panic! This is your personal guide to your new hyper- dimensional portal device 2 Table of Contents Table of Contents ..................................................................... 2 Safety and Care ........................................................................ 2 Getting Started ......................................................................... 4 What’s in the box?! ............................................................... 4 Powering up ......................................................................... 4 Operation .................................................................................. 5 The Button ............................................................................ 6 The Hyperspace App ................................................................ 7 Setup .................................................................................... 7 Usage ................................................................................ 13 Troubleshooting .................................................................... 19 Warranty ................................................................................ 20 Contact .................................................................................. 20 Tech Specs ............................................................................ 21 German/Deutsch............................................................................... 22 French/Français................................................................................ 41 Dutch/Nederlands............................................................................. 60 3 Safety and Care WARNING – Fire Hazard Keep the HyperCube out of direct sunlight. In rare cases, the mirrors can focus sunlight into a point that could cause burns or risk of fire. WARNING – Keep Dry Keep the HyperCube, and its controller and power supply away from excessive moisture. Water can damage the electronics and cause LED malfunction. Prolonged exposure can lower the lifetime of the LEDs. Our warranty does not cover water damage. WARNING – Electric Shock Risk Do not use or operate the device when wet for risk of electric shock. Hyper-Care The HyperCube is an art piece; while it is sturdy, it is not meant to be handled excessively. Be extremely careful with the mirrors. When cleaning the mirror panels, use only a microfiber cloth and, if needed, lightly soapy water. Clean very gently, without applying much pressure, to prevent damage to the mirrored panels. CE Registration: HK2506203256E 4 Getting Started What’s in the box?!  HyperCube  Control Box  Power Supply Powering up 1. Plug the power supply into an outlet (accepts outlet voltage from 100-240V) and plug the USB cord into the power supply. You may also use any standard cell phone charging block (5V) with your own USB-C cord. 2. Connect the HyperCube cable to the control box. Note the orientation. To unplug, press the tab underneath. 5 3. Plug the USB-C connector into the front of the control box. The button on the control box will turn blue. 4. Let there be light! Operation The HyperCube features 3 modes:  Kaleidoscopic: dynamic, fast, and colorful patterns. This is the default mode (40 patterns)  Meditative: calm, classy and slowed down patterns to help you relax (24 patterns)  Sound Reactive: dance and entrance, with specially designed patterns that respond to the beat. A microphone is located inside the control box (31 patterns) 6 Each mode is essentially a playlist of unique patterns. By default, a pattern plays for 60 seconds before switching. New colors are randomly generated every 10 seconds, for near- infinite variety! This behavior can be fully customized in the app. The patterns and modes can be controlled with the button on the control box. The Button × 1: Next pattern × 2: Change mode: Kaleidoscopic Meditative Sound Reactive Hold (2s): Turn off Hold (10s): Reset WiFi credentials 7 The Hyperspace App Hyperspace Lighting Download the “Hyperspace Lighting” app to fully control and customize your HyperCube! Setup The setup process will connect your HyperCube to your home WiFi network for convenient smartphone control. (NOTE: the HyperCube only connects to 2.4 GHz networks) 1. Make sure the cube is not in sound reactive mode. 2. Open the app and press the “+” icon in the top right corner of the main menu 8 4. Enter your home WiFi credentials and press “Connect!”. All fields are case sensitive. Your phone must be connected to this network Note: if the connection fails, press “Can’t Connect?” at the bottom of the screen and follow the instructions. 3. Press “Add New Hyper-Device” 9 5. Accept any permissions and allow your phone to connect to the HyperCube WiFi network channel 6. Wait for the connection process to finish. This could take up to one minute 7. You may go back at any time to re-enter your WiFi credentials or restart the process. Multiple attempts may help in case of failure 8. You’re done - press “My HyperCube” to pilot the controls! 10 Trouble connecting? 9. Refresh: If the connection process finished but the cube isn’t showing up, refresh the device list by swiping down anywhere on the screen 10. Power the cube off and on (fully unplug), then reset the cube’s WiFi by holding the button on the control box for 10s (until the LEDs in the cube flash red then green). 11. Repeat steps 1-7. OR, in step 4 press “Can’t Connect?” at the bottom of the screen and follow the instructions. 12. Alternatively: Press “Temporary Connect” on the “+” menu, “Config” in the top right of the device UI, then “WiFi Setup” at the top of the screen. Enter your WiFi credentials, then go back to the home screen of the app and refresh (swipe down). Connection Tips • Ensure the cube is near your router for initial connection. It can be moved further after setup. • Ensure you are connecting to a 2.4 GHz WiFi network, and your phone is already connected to this WiFi. • D…

Text truncated - open the document above for the full version.

TheHyperspaceLightingCompanyLimitedLiability Company CoveredEquipmentCertificationAttestationLetter 1/28/2026 FederalCommunicationsCommission AuthorizationandEvaluationDivision 7435OaklandMillsRoad Columbia,MD21046 USA ATTN.:ReviewingEngineer FCCID:2BUDS-HC15-SE TheHyperspaceLightingCompanyLimitedLiabilityCompany(“theapplicant”)certifies thattheequipmentforwhichauthorizationissoughtisnot“covered”equipment prohibitedfromreceivinganequipmentauthorizationpursuanttosection2.903ofthe FCCrules. Note:Iftheequipmentforwhichtheapplicantseeksauthorizationisproducedbyanyof theentitiesidentifiedonthecurrentCoveredList,theapplicantshouldincludean explanationonwhytheequipmentisnot“covered”equipment. TheHyperspaceLightingCompanyLimitedLiabilityCompany(“theapplicant”)certifies that,asofthedateofthefilingoftheapplication,theapplicantisnotidentifiedonthe CoveredList(asaspecificallynamedentityoranyofitssubsidiariesoraffiliates)asan entityproducing“covered”equipment. TheHyperspaceLightingCompanyLimitedLiabilityCompany(“theapplicant”)certifies thattheequipmentforwhichauthorizationissoughtdoesnotincludecybersecurityor anti-virussoftwareproducedorprovidedbyKasperskyLab,Inc.oranyofitssuccessors andassignees,includingequipmentwithintegratedKasperskyLab,Inc.(oranyofits successorsandassignees)cybersecurityoranti-virussoftwarepursuanttoDA-24-886 andKDB986446D01CoveredEquipmentGuidancesectionB(2a). Signed: Printedname:DylanLovinger Title:CEO CompanyName:TheHyperspaceLightingCompanyLimitedLiabilityCompany Date:1/28/2026

CERTIFICATIONDESIGNATINGAU.S.AGENTFORSERVICEOFPROCESS Date:Jan.27,2026 FederalCommunicationsCommission AuthorizationandEvaluationDivision 7435OaklandMillsRoad Columbia,Maryland21046 FCCID:2BUDS-HC15-SE ToWhomItMayConcern: Asrequiredbysection2.911(d)(7),we[TheHyperspaceLightingCompanyLimited LiabilityCompany,FRN:0037865433]certifiesthatweacknowledgethedesignation ofacontactlocatedintheUnitedStatesforpurposesofactingastheapplicant’sagent forserviceofprocess.We[TheHyperspaceLightingCompanyLimitedLiability Company]acceptstomaintainanagentfornolessthanoneyearafterthegrantee hasterminatedallmarketingandimportationortheconclusionofany Commission-relatedproceedinginvolvingtheequipment. Asrequiredbysection2.911(d)(7),we[TheHyperspaceLightingCompanyLimited LiabilityCompany,302WashingtonSt#715SanDiego,CA92103,USA,FRN: 0037865433]certifiesthatweacknowledgeourobligationactingastheapplicant’s agentforserviceofprocessfortheabovereferencedFCCID.We[TheHyperspace LightingCompanyLimitedLiabilityCompany]confirmthatwearenotassociatedwith orpartofanyTCBorFCCrecognisedtestlab. Thankyouforyourattentiontothismatter. Sincerelyyours, SignaturebyapplicantSignaturebydesignatedagent(ifdifferent fromapplicant) PrintedName:DylanLovingerPrintedName:DylanLovinger Company:TheHyperspaceLightingCompany LimitedLiabilityCompany Company:TheHyperspaceLightingCompany LimitedLiabilityCompany Address:302WashingtonSt#715SanDiego, CA92103,USA Address:4302WashingtonSt#715San Diego,CA92103,USA JobTitle:CEOJobTitle:CEO Email:[email protected]:[email protected] Telephone:+1508-237-3924Telephone:+1508-237-3924

TheHyperspaceLightingCompanyLimitedLiabilityCompany Date:2026-01-28 FederalCommunicationsCommission Authorization&EvaluationDivision 7345OaklandMillsRoad Columbia,Maryland21046 RE:LETTEROFAGENTAUTHORIZATION FCCID:2BUDS-HC15-SE ToWhomItMayConcern: We,theundersigned,herebyauthorizeComplianceTesting,LLCtoactonourbehalfinallmatters relatingtoapplicationforequipmentauthorization,includingthesigningofalldocumentsrelatingto thesematters. Wealsoherebycertifythatnopartytotheapplicationauthorizedhereunderissubjecttothedenialof benefits,includingFCCbenefits,pursuanttoSection5301oftheAnti-DrugAbuseActof1988,21 U.S.C.853(a). Signature PrintedName:DylanLovinger Company:TheHyperspaceLightingCompanyLimitedLiabilityCompany JobTitle:CEO Email:[email protected] Telephone:+1508-237-3924

TheHyperspaceLightingCompanyLimitedLiability Company RequestforLong-TermConfidentialityLetter-FCC Date:2026-01-28 FederalCommunicationsCommission AuthorizationandEvaluationDivision 7435OaklandMillsRoad Columbia,Maryland21046 Re:RequestforLong-Termconfidentiality FCCID:2BUDS-HC15-SE Towhomitmayconcern, Weherebyrespectfullyrequestthatundertheprovisionof47CFR0.459and0.457(d)the documentslistedbelowandattachedwiththisapplicationforcertificationbeprovidedwithLong- Termconfidentialstatus.  Schematics OperationalDescription FrequencyBlockDiagrams Anyexhibit/informationforwhichwehaverequestedconfidentiality,butwhichmaynotbe accordedsuchtreatmentbytheFCC,shouldbereturnedtous. Thedocumentslistedabovecontaintradesecretsthataretreatedasconfidentialbyus. Substantialcompetitiveharmtouscouldresultshouldtheybemadeavailabletothepublic. Sincerelyyours, Signature PrintedName:DylanLovinger Company:TheHyperspaceLightingCompanyLimitedLiabilityCompany JobTitle:CEO Email:[email protected] Telephone:+1508-237-3924

TheHyperspaceLightingCompanyLimitedLiabilityCompany ProductSimilarityDeclaration Productname:HyperCube15-SE Modelname:HC15-SE,HyperCube-SE FCCID:2BUDS-HC15-SE We(TheHyperspaceLightingCompanyLimitedLiability Company)herebystatethatallthemodelsareelectricalidentical includingthesamesoftwareparameterandhardwaredesign(i.e., circuitdesign,PCBLayout,RFmodule/circuit,antennatype(s) andantennalocation,componentsonPCB,etc.,),same mechanicalstructureanddesign(includingproductenclosure, materials,etc.,).Onlythemodelnamesaredifferent. Signature PrintedName:DylanLovinger Company:TheHyperspaceLightingCompanyLimitedLiability Company JobTitle:CEO Email:[email protected] Telephone:+1508-237-3924

ReportNo.:BKC25125579ME-4 ExternalPhotos Model:HC15-SE ReportNo.:BKC25125579ME-4 ReportNo.:BKC25125579ME-4 ReportNo.:BKC25125579ME-4 ReportNo.:BKC25125579ME-4 ReportNo.:BKC25125579ME-4

FCCID:2BUDS-HC15-SE Thisdevicecomplieswithpart15oftheFCCRules.Operationissubjecttothe followingtwoconditions:(1)thisdevicemaynotcauseharmfulinterference,and (2)Thisdevicemustacceptanyinterferencereceived,includinginterferencethat maycauseundesiredoperation. 1.5CM 0.5CM

ReportNo.:BKC25125579ME-5 InternalPhotos Model:HC15-SE ReportNo.:BKC25125579ME-5 ReportNo.:BKC25125579ME-5

FCCID:2BUDS-HC15-SE RFExposureEvaluation AccordingtoKDB447498D01GeneralRFExposureGuidancev06andpart2.1091，Unlessspecifically requiredbythepublishedRFexposureKDBprocedures,standalone1-gheadorbodyand10-gextremity SARevaluationforgeneralpopulationexposureconditions,bymeasurementornumericalsimulation,isnot requiredwhenthecorrespondingSARTestExclusionThresholdcondition(s),listedbelow,is(are)satisfied. Limits Thecriterialistedinthefollowingtableshallbeusedtoevaluatetheenvironmentimpactofhumanexposure toradiofrequency(RF)radiationasspecifiedin1.1307(b) LimitsforMaximumPermissibleExposure(MPE) Frequencyrange (MHz) Electricfield strength (V/m) Magneticfieldstrength (A/m) Powerdensity (mW/cm 2 ) Averagingtime (minutes) (A)LimitsforOccupational/ControlledExposures 0.3–3.06141.63*(100)6 3.0–301842/f4.89/f*(900/f 2 )6 30–30061.40.1631.06 300–1500f/3006 1500–100,00056 (B)LimitsforGeneralPopulation/UncontrolledExposure 0.3–1.346141.63*(100)30 1.34–30824/f2.19/f*(180/f 2 )30 30–30027.50.0730.230 300–1500f/150030 1500–100,0001.030 f=frequencyinMHz Friistransmissionformula:Pd=(Pout*G)/(4*pi*r 2 ) Where Pd=powerdensityinmW/cm 2 ,Pout=outputpowertoantennainmW; G=gainofantennainlinearscale,Pi=3.1416; R=distancebetweenobservationpointandcenteroftheradiatorincm PdidthelimitofMPE,1mW/cm 2 .Ifweknowthemaximumgainoftheantennaandthetotalpowerinputto theantenna,throughthecalculation,wewillknowthedistancerwheretheMPElimitisreached. TestProcedure SoftwareprovidedbyclientenabledtheEUTtotransmitandreceivedataatlowest,middleandhighest channelindividually. TestResultofRFExposureEvaluation Mode Freqeuncy (MHz) Antenna Gain (dBi) Antenna Gain (numeric) Max conducted power Output powerto antenna (mW) Power Densityat R=20cm (mW/cm 2 ) Limit (mW/cm 2 ) Result 2.4G WIFI 24123.422.19814.4928.120.012301PASS Remark: 2.4GWIFIantennagain=3.42dBi

Report TheHyperspaceLightingCompanyLimitedLiabilityCompany FCCID:2BUDS-HC15-SE Model:HC15-SE 1.DutyCycle ConditionModeFrequency(MHz)AntennaDutyCycle(%)CorrectionFactor(dB)1/T(kHz) NVNTb2412Ant110000 NVNTb2437Ant110000 NVNTb2462Ant110000 NVNTg2412Ant110000 NVNTg2437Ant110000 NVNTg2462Ant110000 NVNTn202412Ant110000 NVNTn202437Ant110000 NVNTn202462Ant110000 NVNTn402422Ant110000 NVNTn402437Ant110000 NVNTn402452Ant110000 Report DutyCycleNVNTb2412MHzAnt1 DutyCycleNVNTb2437MHzAnt1 Report DutyCycleNVNTb2462MHzAnt1 DutyCycleNVNTg2412MHzAnt1 Report DutyCycleNVNTg2437MHzAnt1 DutyCycleNVNTg2462MHzAnt1 Report DutyCycleNVNTn202412MHzAnt1 DutyCycleNVNTn202437MHzAnt1 Report DutyCycleNVNTn202462MHzAnt1 DutyCycleNVNTn402422MHzAnt1 Report DutyCycleNVNTn402437MHzAnt1 DutyCycleNVNTn402452MHzAnt1 Report 2.MaximumAverageConductedOutputPower ConditionModeFrequency (MHz) AntennaConductedPower (dBm) DutyFactor (dB) TotalPower (dBm) Limit (dBm) Verdict NVNTb2412Ant114.49014.4930Pass NVNTb2437Ant113.96013.9630Pass NVNTb2462Ant112.62012.6230Pass NVNTg2412Ant112.31012.3130Pass NVNTg2437Ant112.11012.1130Pass NVNTg2462Ant110.93010.9330Pass NVNTn202412Ant112.28012.2830Pass NVNTn202437Ant111.97011.9730Pass NVNTn202462Ant110.8010.830Pass NVNTn402422Ant111.43011.4330Pass NVNTn402437Ant111.51011.5130Pass NVNTn402452Ant110.81010.8130Pass Report AveragePowerNVNTb2412MHzAnt1 AveragePowerNVNTb2437MHzAnt1 Report AveragePowerNVNTb2462MHzAnt1 AveragePowerNVNTg2412MHzAnt1 Report AveragePowerNVNTg2437MHzAnt1 AveragePowerNVNTg2462MHzAnt1 Report AveragePowerNVNTn202412MHzAnt1 AveragePowerNVNTn202437MHzAnt1 Report AveragePowerNVNTn202462MHzAnt1 AveragePowerNVNTn402422MHzAnt1 Report AveragePowerNVNTn402437MHzAnt1 AveragePowerNVNTn402452MHzAnt1 Report 3.-6dBBandwidth ConditionModeFrequency(MHz)Antenna-6dBBandwidth(MHz)Limit-6dBBandwidth(MHz)Verdict NVNTb2412Ant19.10.5Pass NVNTb2437Ant18.8890.5Pass NVNTb2462Ant19.1640.5Pass NVNTg2412Ant116.3760.5Pass NVNTg2437Ant116.3940.5Pass NVNTg2462Ant116.4110.5Pass NVNTn202412Ant117.2010.5Pass NVNTn202437Ant117.1910.5Pass NVNTn202462Ant117.0950.5Pass NVNTn402422Ant132.6140.5Pass NVNTn402437Ant133.0650.5Pass NVNTn402452Ant133.2030.5Pass Report -6dBBandwidthNVNTb2412MHzAnt1 -6dBBandwidthNVNTb2437MHzAnt1 Report -6dBBandwidthNVNTb2462MHzAnt1 -6dBBandwidthNVNTg2412MHzAnt1 Report -6dBBandwidthNVNTg2437MHzAnt1 -6dBBandwidthNVNTg2462MHzAnt1 Report -6dBBandwidthNVNTn202412MHzAnt1 -6dBBandwidthNVNTn202437MHzAnt1 Report -6dBBandwidthNVNTn202462MHzAnt1 -6dBBandwidthNVNTn402422MHzAnt1 Report -6dBBandwidthNVNTn402437MHzAnt1 -6dBBandwidthNVNTn402452MHzAnt1 Report 4.OccupiedChannelBandwidth ConditionModeFrequency(MHz)Antenna99%OBW(MHz) NVNTb2412Ant113.145 NVNTb2437Ant113.088 NVNTb2462Ant113.102 NVNTg2412Ant116.441 NVNTg2437Ant116.444 NVNTg2462Ant116.443 NVNTn202412Ant117.358 NVNTn202437Ant117.338 NVNTn202462Ant117.336 NVNTn402422Ant134.737 NVNTn402437Ant134.676 NVNTn402452Ant134.667 Report OBWNVNTb2412MHzAnt1 OBWNVNTb2437MHzAnt1 Report OBWNVNTb2462MHzAnt1 OBWNVNTg2412MHzAnt1 Report OBWNVNTg2437MHzAnt1 OBWNVNTg2462MHzAnt1 Report OBWNVNTn202412MHzAnt1 OBWNVNTn202437MHzAnt1 Report OBWNVNTn202462MHzAnt1 OBWNVNTn402422MHzAnt1 Report OBWNVNTn402437MHzAnt1 OBWNVNTn402452MHzAnt1 Report 5.MaximumPowerSpectralDensityLevel ConditionModeFrequency (MHz) AntennaConductedPSD (dBm/3kHz) DutyFactor (dB) TotalPSD (dBm/3kHz) Limit (dBm/3kHz) Verdict NVNTb2412Ant1-14.060-14.068Pass NVNTb2437Ant1-14.640-14.648Pass NVNTb2462Ant1-15.970-15.978Pass NVNTg2412Ant1-17.720-17.728Pass NVNTg2437Ant1-18.370-18.378Pass NVNTg2462Ant1-18.690-18.698Pass NVNTn202412Ant1-17.670-17.678Pass NVNTn202437Ant1-18.350-18.358Pass NVNTn202462Ant1-18.650-18.658Pass NVNTn402422Ant1-18.490-18.498Pass NVNTn402437Ant1-19.360-19.368Pass NVNTn402452Ant1-20.420-20.428Pass Report PSDNVNTb2412MHzAnt1 PSDNVNTb2437MHzAnt1 Report PSDNVNTb2462MHzAnt1 PSDNVNTg2412MHzAnt1 Report PSDNVNTg2437MHzAnt1 PSDNVNTg2462MHzAnt1 Report PSDNVNTn202412MHzAnt1 PSDNVNTn202437MHzAnt1 Report PSDNVNTn202462MHzAnt1 PSDNVNTn402422MHzAnt1 Report PSDNVNTn402437MHzAnt1 PSDNVNTn402452MHzAnt1 Report 6.BandEdge ConditionModeFrequency(MHz)AntennaMaxValue(dBc)Limit(dBc)Verdict NVNTb2412Ant1-47.86-30Pass NVNTb2462Ant1-57.23-30Pass NVNTg2412Ant1-37.21-30Pass NVNTg2462Ant1-50.17-30Pass NVNTn202412Ant1-35.53-30Pass NVNTn202462Ant1-50.05-30Pass NVNTn402422Ant1-34.34-30Pass NVNTn402452Ant1-42.33-30Pass Report BandEdgeNVNTb2412MHzAnt1Ref BandEdgeNVNTb2412MHzAnt1Emission Report BandEdgeNVNTb2462MHzAnt1Ref BandEdgeNVNTb2462MHzAnt1Emission Report BandEdgeNVNTg2412MHzAnt1Ref BandEdgeNVNTg2412MHzAnt1Emission Report BandEdgeNVNTg2462MHzAnt1Ref BandEdgeNVNTg2462MHzAnt1Emission Report BandEdgeNVNTn202412MHzAnt1Ref BandEdgeNVNTn202412MHzAnt1Emission Report BandEdgeNVNTn202462MHzAnt1Ref BandEdgeNVNTn202462MHzAnt1Emission Report BandEdgeNVNTn402422MHzAnt1Ref BandEdgeNVNTn402422MHzAnt1Emission Report BandEdgeNVNTn402452MHzAnt1Ref BandEdgeNVNTn402452MHzAnt1Emission Report 7.ConductedRFSpuriousEmission ConditionModeFrequency(MHz)AntennaMaxValue(dBc)Limit(dBc)Verdict NVNTb2412Ant1-49.33-30Pass NVNTb2437Ant1-48.56-30Pass NVNTb2462Ant1-45.93-30Pass NVNTg2412Ant1-41.5-30Pass NVNTg2437Ant1-40.95-30Pass NVNTg2462Ant1-39.16-30Pass NVNTn202412Ant1-41.04-30Pass NVNTn202437Ant1-39.64-30Pass NVNTn202462Ant1-39.9-30Pass NVNTn402422Ant1-38.73-30Pass NVNTn402437Ant1-37.94-30Pass NVNTn402452Ant1-37.05-30Pass Report Tx.SpuriousNVNTb2412MHzAnt1Ref Tx.SpuriousNVNTb2412MHzAnt1Emission Report Tx.SpuriousNVNTb2437MHzAnt1Ref Tx.SpuriousNVNTb2437MHzAnt1Emission Report Tx.SpuriousNVNTb2462MHzAnt1Ref Tx.SpuriousNVNTb2462MHzAnt1Emission Report Tx.SpuriousNVNTg2412MHzAnt1Ref Tx.SpuriousNVNTg2412MHzAnt1Emission Report Tx.SpuriousNVNTg2437MHzAnt1Ref Tx.SpuriousNVNTg2437MHzAnt1Emission

ShenzhenBKCTestingCo.,Ltd.ReportNo.:BKC25125819ME-1 TestReportTel:4000-875-3820755-84829082Web:Http://www.bkc-lab.comPage1of29 TESTREPORT Applicant:TheHyperspaceLightingCompanyLimitedLiabilityCompany Address:302WashingtonSt#715SanDiego,CA92103,USA Manufacturer:ShenzhenShihuaIndustryCo.,Ltd Address: No.204,secondfloorofbuildingA,GuotaiIndustrypark,No.22, XintangVillage,Fuchengstreet,Shenzhen ProductName:HyperCube15-SE ModelNumber:HC15-SE,HyperCube-SE Trademark:TheHyperspaceLightingCompany FCCID:2BUDS-HC15-SE TestDate : Dec.22,2025-Jan.08,2026 DateofReport : Jan.08,2026 TestResult: ThisdevicedescribedabovehasbeentestedbyBKC,andthetest resultsshowthattheequipmentundertest(EUT)isincompliance withtheStandardrequirements.Anditisapplicableonlytothetested sampleidentifiedinthereport. TestProcedureUsed: Standards:FCCCFRTitle47Part15SubpartCSection15.247 ANSIC63.10:2020 Preparedby(TestEngineer): CareyZheng Reviewer(Supervisor): CaseyWang Approved(Manager): JerryLiao ShenzhenBKCTestingCo.,Ltd.ReportNo.:BKC25125819ME-1 TestReportTel:4000-875-3820755-84829082Web:Http://www.bkc-lab.comPage2of29 TABLEOFCONTENT 1.GeneralInformation......................................................................................5 1.1.DescriptionofDevice(EUT).......................................................................................................................5 1.2.ChannelList..................................................................................................................................................5 1.3.Summaryoftestresult................................................................................................................................5 1.4.SpecialAccessoriesandAuxiliaryEquipment........................................................................................6 1.5.Testmode......................................................................................................................................................6 1.6.BlockDiagram...............................................................................................................................................6 1.7.Testconfiguration.........................................................................................................................................6 1.8.TestConditions.............................................................................................................................................7 1.9.MeasurementUncertainty(95%confidencelevels,k=2)......................................................................7 1.10.TestFacility..................................................................................................................................................7 1.11.TestEquipment...........................................................................................................................................8 2.Conductedemissionatthemainsterminalstest....................................10 2.1.Limit..............................................................................................................................................................10 2.2.TestSetup....................................................................................................................................................10 2.3.TestProcedure............................................................................................................................................10 2.4.TestResult...................................................................................................................................................11 3.RadiatedSpuriousEmissions...................................................................13 3.1.TestProcedure............................................................................................................................................13 3.2.Limit..............................................................................................................................................................14 3.3.TestSetup....................................................................................................................................................15 3.4.TestResult...................................................................................................................................................17 4.ConductedSpuriousEmissions................................................................22 4.1.Limit..............................................................................................................................................................22 4.2.TestSetup....................................................................................................................................................22 4.3.TestProcedure............................................................................................................................................22 4.4.TestResult...................................................................................................................................................22 5.BandEdgeMeasurement...........................................................................23 5.1.Limit..............................................................................................................................................................23 5.2.Testsetup....................................................................................................................................................23 5.3.TestProcedure............................................................................................................................................23 5.4.TestResult...................................................................................................................................................23 6.-6dBBandwidthand99%BandwidthMeasurement..............................24 6.1.Limit.…

Text truncated - open the document above for the full version.

OTA TEST REPORT Applicant Espressif Systems Product ESP ANT B Model ESP ANT B Report No. Y1806A0621-T1V3 Issue Date November 1, 2021 TA Technology (Shanghai) Co., Ltd. tested the above equipment in accordance with the requirements in ANSI/IEEE Std 149-2008. The test results show that the equipment tested is capable of demonstrating compliance with the requirements as documented in this report. Prepared by: Peng Tao Approved by: Kai Xu TA Technology (Shanghai) Co., Ltd. No.145, Jintang Rd, Tangzhen Industry Park, Pudong Shanghai, China TEL: +86-021-50791141/2/3 FAX: +86-021-50791141/2/3-8000 OTA Test Report Report No: Y1806A0621-T1V3 TA Technology (Shanghai) Co., Ltd. TA-MB-04-008O P age 2 of 14 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. TABLE OF CONTENTS 1. General Information................................................................................................ ....................... 3 1.1. Notes of the Test Report................................................................................................ ... 3 1.2. Testing laboratory................................................................................................ .............. 3 1.3. Laboratory Environment................................................................................................ .... 3 2. General Description of Equipment under Test................................................................ ............... 4 2.1. Applicant Information................................................................................................ ......... 4 2.2. Manufacturer Information................................................................................................ .. 4 2.3. Information of EUT................................................................................................ ............ 4 2.4. Test Date................................................................................................ ........................... 4 2.5. Applied Standards................................................................................................ ............. 5 3. Test Conditions................................................................................................ .............................. 6 3.1. Test Configuration................................................................................................ ............. 6 3.2. Test Measurement................................................................................................ ............. 6 4. Test Results................................................................................................................................ ... 7 4.1. Gain and Efficiency................................................................................................ ............ 7 4.2. Voltage Standing Wave Ratio (VSWR)................................................................ .............. 8 4.3. Antenna S11................................................................................................ ...................... 9 5. Test Equipment List ..................................................................................................................... 10 APPENDIX A: 2-D Pattern Plots ............................................................................................................. 11 APPENDIX B: The EUT Appearance and Test Configuration ............................................................. 13 B.1 EUT Appearance ................................................................................................................. 13 B.2 Test Configuration .............................................................................................................. 14 OTA Test Report Report No: Y1806A0621-T1V3 TA Technology (Shanghai) Co., Ltd. TA-MB-04-008O P age 3 of 14 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. 1. General Information 1.1. Notes of the Test Report This report shall not be reproduced in full or partial, without the written approval of TA technology (shanghai) co., Ltd.The results documented in this r…

Text truncated - open the document above for the full version.