2BUKC-LY-21Massage Chair

P WorkingTime:15-50min RatedPower:120W RatedVoltage:110V-240V ChairroductName: LY-21Massage Productinformation GetHope SafetyPrecautions PrecautionsBeforeUse FunctionOverviewAnd Usage 02-05 06 VoieCommandFunction 07-11 12 Howto movechair 13 - ----------------- - ------------------------- - --------------- --------- - ------------------ FCC Statement Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. The device has evaluated to meet general RF exposure requirement. The device can be used be in portable exposure without restriction. 1 2. Pushforwardusingthe twowheels underneaththe chair . Gentlypushdownheadrestside 1 3.Caution:Ensurethe flooris clearand feet are awayfromwheels 2. Due to its heavyweight,the chairmust bemovedby two or morepeople.Please handlewithcare to avoidstrainingyourback (not the base)withyourhandand lift it . Pleasegraspthe bottomof the side panel SafetyPrecautions The massagecyclelasts20 minutes.Avoidcontinuousmassageon the samearea.forcontinueduse, allowat leasta 30-minuteintervalto preventover-stimulationof musclesoe thr nervousaystem. machinefailures. Whenthe bodyis wet, pleasedo not use it to avoidelectricshockaccidentsor Do not immersethe productin wateror use it in wet evironments(e.g.,bathrooms)to preventelectricshockor equipmentmalfiunction. Operatewhenyou makesure thereare no peopleor p ets aroundyou. It is absolutelyprohibitedto removeor repairthis product.powercord,handcontroller and othercomponentsto avoidelectrical,fire accidentsor machinefailures.Whenthe powercordis broken,it is prohibitedto removeand replaceit privately,whichmustbe repairedorreplacedby the manufactureror qualifiedprofessionals. Do not use damagedpowercords.Donot forciblybend.pull,twist,twist,or damage the powercord.Do not hangheavyobjectso n the powercord.Usingdamagedpower cordmay causeelectricshock,shortcircuitor fire accident. HI,MassageChair Hi,I am here IMPORTANTReminder: Due to the sensitivityof the voicefunction,the chairmay respondunexpectedlyif you are watchingTV or talkingto someone.Thisis NOTa defect.Pleaseturn off the powersupplyof the entiremassagechair.Thankyou. Methodof use SafetyPrecautions BLUETOOTH:GetHopemassagechairPASSWOER:8888 Methodof useSecurityconsiderations Securityconsiderations Methodof use _turner" GetHope_turner GetHope_turner Precautionsbeforeise Functionand name Methodof use

Rev 1/26/2023 Hong Kong Gethope Limited Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 08-30-2026 Ref: Attestation Statements Part 2.911(d)(5)(i) Filing FCC ID: 2BUKC-LY-21 (“Hong Kong Gethope Limited”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. (“Hong Kong Gethope Limited”) certifies that the equipment for which authorization is sought does not include cybersecurity or anti-virus software produced or provided by Kaspersky Lab, Inc. or any of its successors and assignees, including equipment with integrated Kaspersky Lab, Inc. (or any of its successors and assignees) cybersecurity or anti-virus software pursuant to DA-24-886 and KDB 986446 D01 Covered Equipment Guidance section B(2a). Device is inherently compliant based on hardware limitations or software controls. or A Software Bill of Materials (SBOM) is provided to the TCB for review, and The end-user or third parties cannot install additional software on this device. Sincerely, (Applicant signature) (Applicant printed name) Philip He Rev 1/26/2023 Hong Kong Gethope Limited Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 08-30-2026 Ref: Attestation Statements Part 2.911(d)(5)(ii) Filing FCC ID: 2BUKC-LY-21 (“Hong Kong Gethope Limited”) certifies that, as of the date of the filing of the application, Hong Kong Gethope Limited is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing “covered” equipment. Sincerely, (Applicant signature) (Applicant printed name) Philip He

HongKongGethopeLimited ReferenceNo.2026UL0273 Address：D117,9/F,BLK1,KOONWAHMIRRORFACTORY6THINDBUILDING,TUEN MUNHONGKONG,CHINA Date:2026-09-08 FederalCommunicationsCommission AuthorizationandEvaluationDivision 7435OaklandMillsRoad Columbia,MD21046 Ref:AttestationStatementsPart2.911(d)(7)Filing SUBJECT:FCCApplicationforFCCID:2BUKC-LY-21 FRN:0037910585 (“HongKongGethopeLimited”)certifiesthat,asofthedateofthefilingoftheapplication, TTSMARKETINC.isourdesignatedU.S.agentforserviceofprocessfortheabove referencedFCCID.(“HongKongGethopeLimited”)acceptstomaintainanagentfornoless thanoneyearafterthegranteehasterminatedallmarketingandimportationorthe conclusionofanyCommission-relatedproceedinginvolvingtheequipment. TTSMARKETINC.accepts,asofthedateofthefilingoftheapplication,theobligationofthe designatedU.S.agentforserviceofprocessfortheabovereferencedFCCID. DesignatedU.S.AgentInformation: Name:TTSMARKETINC.. Address:1178BroadwaySte324,NewYork,NY10001.USA FRN：0036806057 ContactPerson:MaverickLim Tel.:001-(646)305-2908 Email:[email protected] Sincerely, SignedonbehalfofHongKongGethope Limited SignedonbehalfofTTSMARKETINC.. Name:PhilipHeName:MaverickLim Title:ManagerTitle:GeneralManager Date:2026-09-08Date:2026-09-08

Hong Kong Gethope Limited Date：09-01-2026 Product/ Model Number: Massage Chair/LY-21, LY-22, LY-23, LY-24, LY-25, LY-26, LY-27, LY-28, LY-29, LY-30, LY-31, LY-32, LY-33, LY-34, LY-35, LY-36, LY-37, LY-38, LY-39, LY-40, LY-211, LY-212, LY-213, LY-214, LY-215, LY-216, LY-217, LY-218, LY-219, LY-222 FCC ID：2BUKC-LY-21 To whom it may concern, Re: Product Certification Representative Authorization Letter We authorize QAI Laboratories Ltd. 3980 North Fraser Way, Burnaby B.C. Canada V5J 5K5 to act on our behalf on all matters concerning the above named equipment. This shall include the following: • Testing • Approval applications and procedures We declare that QAI Laboratories Ltd. is allowed to forward all information related to the approval project to the applied certification body and to the notification entities and to discuss any issues concerning the approval application. Any and all acts carried out by QAI Laboratories Ltd. on our behalf shall have the same effect as acts of our own. By: Philip He Contact Listed on FCC Wesbite Title: Manager Email: [email protected] Telephone: 19515373157 On behalf of: Hong Kong Gethope Limited

Hong Kong Gethope Limited Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: September 10, 2026 Subject; Request for Confidentiality FCC ID: 2BUKC-LY-21 To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description Tune-up Procedure Software Security Requirements for UNII devices In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s); External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: Philip He Title: Manager

Hong Kong Gethope Limited Product Similarity Declaration Product name:Massage Chair Model name:LY-21, LY-22, LY-23, LY-24, LY-25, LY-26, LY-27, LY-28, LY- 29, LY-30, LY-31, LY-32, LY-33, LY-34, LY-35, LY-36, LY-37, LY-38, LY-39, LY-40, LY-211, LY-212, LY-213, LY-214, LY-215, LY-216, LY-217, LY-218, LY-219, LY-222 FCC ID:2BUKC-LY-21 We (Hong Kong Gethope Limited) hereby state that all the models are electrical identical including the same software parameter and hardware design (i.e., circuit design, PCB Layout, RF module/circuit, antenna type(s) and antenna location, components on PCB, etc.,), same mechanical structure and design (including product enclosure, materials, etc.,), the only difference is the model name and enclosure. Signature: Name: Philip He Title: Manager Place, date: Hong Kong, 2026.8.27

FCC ID: 2BUKC-LY-21 External Photos

Size：100mm*50mm

MPE REPORT Massage Chair MODEL No.: LY-21, LY-22, LY-23, LY-24, LY-25, LY-26, LY-27, LY-28, LY-29, LY-30, LY-31, LY-32, LY-33, LY-34, LY-35, LY-36, LY-37, LY-38, LY-39, LY-40, LY-211, LY-212, LY-213, LY-214, LY-215, LY-216, LY-217, LY-218, LY-219, LY-222 FCC ID: 2BUKC-LY-21 REPORT NO.: NCT260351006E1-5 ISSUE DATE: Sept. 01, 2026 Prepared for Hong Kong Gethope Limited D117, 9/F, BLK 1, KOON WAH MIRROR FACTORY 6TH IND BUILDING, TUEN MUN HONG KONG, CHINA Prepared by Shenzhen NCT Testing Technology Co., Ltd. A101&2F B2, Fuqiao 6th Area, Xintian Community, Fuhai Street, Baoan District, Shenzhen, People’s Republic of China TEL: 400-8868-419 Report No.: NCT260351006E1-5 Page 2 of 18 Hotline: 400-8868-419 http://www.ncttesting.cn TABLE OF CONTENT Test Report Description Page 1. SUMMARY OF TEST RESULT ........................................................................................................ 4 2. GENERAL INFORMATION ............................................................................................................... 5 2.1. DESCRIPTION OF DEVICE (EUT) .................................................................................................................................... 5 2.2. DESCRIPTION OF TEST FACILITY .................................................................................................................................... 7 2.3. MEASUREMENT UNCERTAINTY ....................................................................................................................................... 7 3. MEASURING DEVICE AND TEST EQUIPMENT ......................................................................... 8 3.1. FOR MPE MEASUREMENT ............................................................................................................................................. 8 4. RF EXPOSURE ................................................................................................................................... 8 4.1. MEASURING STANDARD ................................................................................................................................................. 9 4.2. REQUIMENTS .................................................................................................................................................................. 9 4.3. TEST CONFIGURATION .................................................................................................................................................. 10 4.4. LIMITS ........................................................................................................................................................................... 11 4.5. MEASURING RESULTS .................................................................................................................................................. 13 5. PHOTOGRAPHS OF TEST SETUP .............................................................................................. 18 Report No.: NCT260351006E1-5 Page 3 of 18 Hotline: 400-8868-419 http://www.ncttesting.cn TEST REPORT DESCRIPTION Applicant : Hong Kong Gethope Limited Address : D117, 9/F, BLK 1, KOON WAH MIRROR FACTORY 6TH IND BUILDING, TUEN MUN HONG KONG, CHIN A Manufacturer : Fujian Longyu Technology Co., Ltd Address : No. 77 Industrial Park, Xitan Town, Fu'an City, Fujian Province EUT : Massage Chair Model Name : LY-21, LY-22, LY-23, LY-24, LY-25, LY-26, LY-27, LY-28, LY-29, LY-30, LY-31, LY-32, LY-33, LY-34, LY-35, LY-36, LY-37, LY-38, LY-39, LY-40, LY-211, LY-212, LY-213, LY-214, LY-215, LY-216, LY-217, LY-218, LY-219, LY-222 Trademark : Gethope Measurement Procedure Used: FCC Part 1(1.1310) and Part 2(2.1093) KDB 680106 D01 Wireless Power Transfer v04 The device described above is tested by Shenzhen NCT Testing Technology Co., Ltd. to determine the maximum emission levels emanating from the device and the severe levels of the device can endure and its performance criterion. The measurement results are contained in this test report and Shenzhen NCT Testing Technology Co., Ltd. is assumed full of responsibility for the accuracy and completeness of these measurements. Also, this report shows that the EUT (Equipment Under Test) is technically compliant with the FCC requirements. This report applies to above tested sample only and shall not be reproduced in part without written approval of Shenzhen NCT Testing Technology Co., Ltd. Test Engineer: Keven Wu / Engineer Technical Manager: Henry Wang / Manager Report No.: NCT260351006E1-5 Page 4 of 18 Hotline: 400-8868-419 http://www.ncttesting.cn 1. SUMMARY OF TEST RESULT EMISSION Description of Test Item Standard & Limits Results MPE FCC Part 1(1.1310) and Part 2(2.1093) KDB 680106 D01 Wireless Power Transfer v04 Pass Note: N/A is an abbreviation for Not Applicable. Report No.: NCT260351006E1-5 Page 5 of 18 Hotline: 400-8868-419 http://www.ncttesting.cn 2. GENERAL INFORMATION 2.1. Description of Device (EUT) EUT : Massage Chair Model Number : LY-21, LY-22, LY-23, LY-24, LY-25, LY-26, LY-27, LY-28, LY-29, LY-30, LY-31, LY-32, LY-33, LY-34, LY-35, LY-36, LY-37, LY-38, LY-39, LY-40, LY-211, LY-212, LY-213, LY-214, LY-215, LY-216, LY-217, LY-218, LY-219, LY-222 Model different : All models have different colors and names, the rest are exactly the same. Power Rating : Input: AC 120V/60Hz Wireless Output: 10W Operation Frequenc y for WPT : 111-205 KHz Modulation : ASK/FSK Antenna Type: : Coil Antenna Date of Received : Aug. 25, 2026 Date of Test : Aug. 25, 2026 to Sept. 01, 2026 Report No.: NCT260351006E1-5 Page 6 of 18 Hotline: 400-8868-419 http://www.ncttesting.cn 2.2. Test Setup For mobile exposure conditions: For portable exposure conditions: Report No.: NCT260351006E1-5 Page 7 of 18 Hotline: 400-8868-419 http://www.ncttesting.cn 2.3. Description of Test Facility 2.4. Measurement Uncertainty Parameter Uncertainty RF output power, conducted ±1.0dB Power Spectral Density, conducted ±2.2dB Radio Frequency ± 1 x 10 -6 Ban…

Text truncated - open the document above for the full version.

Page1of 4 东莞市金赞智能科技有限公司 DONGGUAN KIMCHEN INDUSTRY INTL LIMITED Address:2 Xisha Road, Shijie Town, Dongguan City Tel：86-076986018114 Fax：86-076986015646 Http://www.jzcoil.com 文件编号FilNo: KC-JZ-09-008 DONGGUAN KIMCHEN INDUSTRY INTL LIMITED 产品规格书 PRODUCT SPECIFICATION 拟制 PREPARED BY 跟单员 MERCHANDISER 工程审核 ENGINEER CHECKED BY 制程审核 PRODUCTION CHECKDED BY 批准 APPROVED BY 刘志强 客 户： SHENZHEN XINPIN INNOVATION ELECTRONIC TECHNOLOGY CO.,LTD CUSTOMER:____________________________________________________________________ 客户料号：101.0069 CUST P/N:____________________________________________________________________ 金赞料号： K C P/N:____________________________________________________________________ 产品型号： 20.5*42*0.08*105P*10TS*10mm D E S E : 日 期：2022.6.18 D A T E :____________________________________________________________________ 版 本： A.0 VERSION :____________________________________________________________________ （客户承认受领印）ACCEPTANCE STAMP Page of 4 东莞市金赞智能科技有限公司 DONGGUAN KIMCHEN INDUSTRY INTL LIMITED Address:2 Xisha Road, Shijie Town, Dongguan City Tel：86-076986018114 Fax：86-076986015646 Http://www.jzcoil.com 文件编号FilNo: KC-JZ-09-008 101.0069 拟制 PREPARED BY 工程审核 ENGINEER CHECKED BY 制程审核 PRODUCTION CHECKED BY 刘志强 2 1.产品外形尺寸（OVERALL DIMENSIONS OF PRODUCTS): DATA reviser A.0 -- 新发行（Initial Release） 2022/6/18 Liu Zhi Version Changenge History Page of 4 东莞市金赞智能科技有限公司 DONGGUAN KIMCHEN INDUSTRY INTL LIMITED Address:2 Xisha Road, Shijie Town, Dongguan City Tel：86-076986018114 Fax：86-076986015646 Http://www.jzcoil.com 文件编号FilNo: KC-JZ-09-008 规 格 内 容 Specification 客 户 料 号： CUST P/N 101.0069 金 赞 型 号： KC DESE 20.5*42*0.08*105P*10TS*10mm 拟制 PREPARED BY 工程审核 ENGINEER CHECKED BY 制程审核 PRODUCTION CHECKED BY 刘志强 3 Page of 4 东莞市金赞智能科技有限公司 DONGGUAN KIMCHEN INDUSTRY INTL LIMITED Address:2 Xisha Road, Shijie Town, Dongguan City Tel：86-076986018114 Fax：86-076986015646 Http://www.jzcoil.com 文件编号FilNo: KC-JZ-09-008 Spe cification B CUST P/N 101.0069 F ： G 20.5*42*0.08*105P*10TS*10mm 拟制 PREPARED BY 工程审核 ENGINEER CHECKED BY 制程审核 PRODUCTION CHECKED BY 刘志强 4 单位(Unit):毫米(mm) PS:1.（E）Magnetic outer lead length；2.（H）No incoming wires are included；3.（J）Release paper not included 圈数 Turns 线径 Wire Dia. 绕线方式 疏/密 Wdg. Type Spred/Close 绕线方向 Wdg.Direction 相交 是/否 Intersect Yes/Not 线圈 正/反贴 Coil Positive/Anti Paste 10TS 0.08*105P丝包线 （Silk-Covered Wire） 密绕（Close） 逆时针 （Anticlockwise） 是（Yes） 反贴（Anti/-Paste） 所有材料要求合格ROHS标准 All materials are required to be ROHS compliant 2.电气特性（ELECTRICAL CHARACTERISTICS): 温度TEMPERATURE:25±10°C,湿度RELATIVE HUMIDITY:65±10% 序号 NO. 项目 ITEM 端子 TERMINAL 标准 SPECIFICATION 测试条件 TEST FREQUENCY 测试仪器 TEST EQUIPMENTS 1 IND S-F 线圈加磁片：6.3 uH±10% 100kHz/V LCZ METER 1062 3.材料清单（BILL OF MATERIAIS): 序号 NO. 材料名称 Material name 品名描述 Description 物料代码 Material Code 厂商代码 Vendor code 1 线材 0.08*105P丝包线 SBX-2U-F-0013 ZY C D E H I J 20.5±0.5 42±1 5.0±0.5 43.5± 0.5 10±1 3±1 10±2 1.25max 1.0±0.1 2.8max Page of 4 东莞市金赞智能科技有限公司 DONGGUAN KIMCHEN INDUSTRY INTL LIMITED Address:2 Xisha Road, Shijie Town, Dongguan City Tel：86-076986018114 Fax：86-076986015646 Http://www.jzcoil.com 文件编号FilNo: KC-JZ-09-008 规 格 内 容 Specification 客 户 料 号： CUST P/N 101.0069 金 赞 型 号： KC DESE 20.5*42*0.08*105P*10TS*10mm 拟制 PREPARED BY 工程审核 ENGINEER CHECKED BY 制程审核 PRODUCTION CHECKED BY 刘志强 5 2 ferrite G43.5*5.0*1.0H（With hole） 3 doubletape 42*5.0*0.08H(with hole, with hand tear) 4 Gold finger tape 8mm HT tape 8MM JRM 5 glue JS-E103 E103W-2 BRF 6 tin bar Environmentally friendly solder bar XC

FCC PART 15 SUBPART C Massage Chair MODEL No.: LY-21, LY-22, LY-23, LY-24, LY-25, LY-26, LY-27, LY-28, LY-29, LY-30, LY-31, LY-32, LY-33, LY-34, LY-35, LY-36, LY-37, LY-38, LY-39, LY-40, LY-211, LY-212, LY-213, LY-214, LY-215, LY-216, LY-217, LY-218, LY-219, LY-222 FCC ID: 2BUKC-LY-21 REPORT NO.: NCT260351006E1-4 ISSUE DATE: Sept. 01, 2026 Prepared for Hong Kong Gethope Limited D117, 9/F, BLK 1, KOON WAH MIRROR FACTORY 6TH IND BUILDING, TUEN MUN HONG KONG, CHINA Prepared by Shenzhen NCT Testing Technology Co., Ltd. A101&2F B2, Fuqiao 6th Area, Xintian Community, Fuhai Street, Baoan District, Shenzhen, People’s Republic of China TEL: 400-8868-419 Report No.: NCT260351006E1-4 Page 2 of 23 Hotline: 400-8868-419 http://www.ncttesting.cn TABLE OF CONTENT Test Report Description Page 1. SUMMARY OF TEST RESULTS ............................................................................................................................. 5 2. GENERAL INFORMATION ...................................................................................................................................... 6 2.1. Description of Device (EUT) .............................................................................................................................. 6 2.2. Description of Support Units .............................................................................................................................. 6 2.3. Independent Operation Modes .......................................................................................................................... 7 2.4. Test Mode .......................................................................................................................................................... 7 2.5. Description of Test Facility ................................................................................................................................. 7 2.6. Measurement Uncertainty .................................................................................................................................. 8 3. MEASURING DEVICE AND TEST EQUIPMENT .................................................................................................... 9 4. 20DB BANDWIDTH ............................................................................................................................................... 11 4.1. Test Procedure ................................................................................................................................................ 11 4.2. Test Results ..................................................................................................................................................... 11 5. POWER LINE CONDUCTED EMISSION MEASUREMENT ................................................................................. 12 5.1. Block Diagram of Test Setup ........................................................................................................................... 12 5.2. Limits ................................................................................................................................................................ 12 5.3. Test Procedure ................................................................................................................................................ 12 5.4. Measuring Results ........................................................................................................................................... 13 6. RADIATED EMISSION TEST ................................................................................................................................ 16 6.1. Measurement Procedure ................................................................................................................................. 16 6.2. Test SET-UP (Block Diagram of Configuration) .............................................................................................. 16 6.3. Radiated Emission Limit .................................................................................................................................. 17 6.4. Measurement Result ........................................................................................................................................ 19 7. TEST PHOTOGRAPHS AND EUT PHOTOGRAPHS ........................................................................................... 23 Report No.: NCT260351006E1-4 Page 3 of 23 Hotline: 400-8868-419 http://www.ncttesting.cn TEST REPORT DESCRIPTION Applicant : Hong Kong Gethope Limited Address : D117, 9/F, BLK 1, KOON WAH MIRROR FACTORY 6TH IND BUILDING, TUEN MUN HONG KONG, CHINA Manufacturer : Fujian Longyu Technology Co., Ltd Address : No. 77 Industrial Park, Xitan Town, Fu'an City, Fujian Province EUT : Massage Chair Model Name : LY-21, LY-22, LY-23, LY-24, LY-25, LY-26, LY-27, LY-28, LY-29, LY-30, LY-31, LY-32, LY-33, LY-34, LY-35, LY-36, LY-37, LY-38, LY-39, LY-40, LY-211, LY-212, LY-213, LY-214, LY-215, LY-216, LY-217, LY-218, LY-219, LY-222 Trademark : Gethope Measurement Procedure Used: APPLICABLE STANDARDS STANDARD TEST RESULT FCC 47 CFR Part 15, Subpart C PASS The above equipment was tested by Shenzhen NCT Testing Technology Co., Ltd.The test data, data evaluation, test procedures, and equipment configurations shown in this report were made in accordance with the procedures given in ANSI C63.10-2020 + Cor. 1-2023+C63.10a-2024 + Errata to C63.10a-2024 and the energy emitted by the sample EUT tested as described in this report is in compliance with conducted and radiated emission limits of FCC Rules Part 15C The test results of this report relate only to the tested sample identified in this report. Test Engineer: Keven Wu / Engineer Technical Manager: Henry Wang / Manager Report No.: NCT260351006E1-4 Page 4 of 23 Hotline: 400-8868-419 http://www.ncttesting.cn Modified Information Version Report No. Revision Data Summary Ver.1.0 NCT26035100…

Text truncated - open the document above for the full version.

FCC ID:2BUKC-LY-21 Test Photo Radiated Emission Test Setup Conducted Emission Test View