
Text extracted from the exhibit documents filed with the FCC. Open a document above to read the original.
[EN/nelna pencil] User Guide Nelna Pencil — crafted for refined design and detailed note-taking. To help you use it more comfortably, hereʼs a quick user guide. Product Overview EN/nelna pencil] User Guide1 2BUL4-NA-P01 FCC Information FCC ID 2BUL4NAP01 This device complies with Part 15 of the FCC Results. Operation is subject to the following two conditions: 1 This Device may not cause harmful interface, and 2 This Device must accept any interference received, including interference that may cause undesired operation. ❗ Note This equipment has been tested and found to comply with the limits for CLASS B digital device, pursuant to Part 15 FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try correct the interference by one or more of the following measures ; 1.1. Reorient or relocate the receiving antenna. 1.2. Increase the separation between the equipment and receiver. 1.3. Connect the equipment into an outlet on a circuit different from that to which receiver is connected. 1.4. Consult the dealer or experienced radio/TV technician for help. WARNING Changes or modifications not expressly approved by the manufacturer could void the userʼs authority to operate the equipment. How to Use EN/nelna pencil] User Guide 2 ✏ Before first use, please fully charge your Nelna Pencil. ❗In this guide, click the ▶ arrow to expand and see more details. Click the arrow next to it. It will expand like this, and youʼll be able to see the details! Power On / Power Off Press and hold the middle (②) button among the three buttons. When the light at the tip turns on, the Pencil is ON. Press and hold it again to turn it OFF. Pairing If there is no stylus currently connected to your iPad (first-time pairing) Settings Bluetooth Select nelna pencil Pairing complete If another stylus is already connected to your iPad Settings Bluetooth Tap Apple Pencil → Forget This Device → Turn ON the Nelna Pencil Select nelna pencil Pairing complete ❗Notes If another stylus is paired, the Nelna Pencil may not pair. Please unpair the existing stylus first. Onl y one stylus can be paired per device.) Even if pairing is not completed, the Pencil may still work for drawing/writing. If you used the Nelna Pencil on Device A and want to pair it with Device B, remove (forget) the Nelna Pencil from Device A first. If pairing fails, make sure your iPad is running iOS 12.2 or later. EN/nelna pencil] User Guide 3 If you experience disconnects or lag, update iOS and your note-taking app to the latest version. This product is for iPad only and is not compatible with other tablets (e.g., Galaxy Tab, Xiaomi Pad, etc.). Charging Nelna Pencil supports both wired and wireless charging. However, wireless charging is only available on certain models, so please make sure to check whether your model supports it. Indicator light Low battery The light flashes quickly. Charging The light flashes slowly. Fully charged The light stays ON for 30 seconds, then turns OFF. Wired charging Gently pull up the ferrule part of the Nelna Pencil to reveal the USBC charging port. Connect the charging cable to charge the Pencil. Wireless charging Place the Pencil with the nelna logo facing up, then attach it to the magnetic charging area. Wired Charging EN/nelna pencil] User Guide 4 Wireless Charging Compatible Models Button Functions Weʼve built in key features optimized for note-taking apps like GoodNotes and Flexcil. The buttons work like keyboard shortcuts—they simply trigger shortcut commands for you. Wireless charging EN/nelna pencil] User Guide 5 Because button behavior can vary by app, please check which button functions are available in the app you use. EN/nelna pencil] User Guide 6 Other Apps Compatible Apps: Noteful, Clip Studio Paint 1 Not eful Middle button — single click: Select Eraser tool Top button — single click: Select Hand tool (move/pan the screen) Middle button — double click: Undo 2 Clip Studio Paint Bottom button — single click: Select Pen tool Middle button — single click: Select Eraser tool Top button — single click: Select Color Switch Pr evious color Transparent/eraser color) Bottom button — double click: Select Pen tool Middle button — double click: Undo Top button — double click: Open the Reference Point Selection window Partially Compatible Apps: Notability, Margin Note, Noteshelf, iPhone Notes, Nebo In these apps, double-clicking the middle button only supports undoing one stroke at a time. Margin Note exception: Undo works by unit, not always by a single stroke. Example: If you write 1, 2, 3 separately and press Undo, it cancels one number at a time. If you write 123 continuously and press Undo, “123ˮ may be recognized as one unit and deleted all at once. Not Compatible: Note Plus, CollaNote, Free Notes Show the On-Screen Keyboard EN/nelna pencil] User Guide 7 Because Nelna Pencilʼ s physical button shortcuts work on the same principle as a Bluetooth keyboard, your iPad may recognize the Pencil as a keyboard— so the on-screen keyboard may automatically disappear while youʼre using it. When you need the keyboard in a text field, please use one of the methods below: Video 100 Use the Nelna Pencil to write by hand (handwriting input). Video 1100 Enable the keyboard pop-up to bring back the on-screen keyboard. attachment:ea6ddba4-ab1945e2-b45d-c6a1efb08b9c:낼나펜슬_키보드.m p4 Replacing the Nib Nelna Pencil comes with a pr…
Text truncated - open the document above for the full version.
Rev 1/26/2023 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 01-23-2026 Ref: Attestation Statements Part 2.911(d)(5)(i) Filing FCC ID: 2BUL4-NA-P01 [Nelna inc.] (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. [Nelna inc.] (“the applicant”) certifies that the equipment for which authorization is sought does not include cybersecurity or anti-virus software produced or provided by Kaspersky Lab, Inc. or any of its successors and assignees, including equipment with integrated Kaspersky Lab, Inc. (or any of its successors and assignees) cybersecurity or anti-virus software pursuant to DA-24-886 and KDB 986446 D01 Covered Equipment Guidance section B(2a). Device is inherently compliant based on hardware limitations or software controls. or A Software Bill of Materials (SBOM) is provided to the TCB for review, and The end-user or third parties cannot install additional software on this device. Sincerely, Heewon Jang / Manager #402, 16 Pildong-ro, Jung-gu, Seoul, 04626, Republic of Korea Tel: 82-070-8064-2797 Rev 1/26/2023 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 01-23-2026 Ref: Attestation Statements Part 2.911(d)(5)(ii) Filing FCC ID: 2BUL4-NA-P01 [Nelna inc.] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing “covered” equipment. Sincerely, Heewon Jang / Manager #402, 16 Pildong-ro, Jung-gu, Seoul, 04626, Republic of Korea Tel: 82-070-8064-2797
Rev 1/26/2023 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 01-23-2026 Ref: Attestation Statements Part 2.911(d)(7) Filing FCC ID: 2BUL4-NA-P01 Applicant FRN: 0037930534 [Nelna inc.] (“the applicant”) certifies that, as of the date of the filing of the application, [FCC US AGENT,LLC] is our designated U.S. agent for service of process for the above referenced FCC ID. [Nelna inc.] accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. [FCC US AGENT,LLC] accepts, as of the date of the filing of the application, the obligation of the designated U.S. agent for service of process for the above referenced FCC ID. Designated U.S. Agent Information: Company Name: FCC US Agent, LLC FRN: 0033402884 Address: 3722 Illinois Avenue, Saint Charles, IL, 60174, USA Contact Person: Tim Payne Phone: 708-571-3148 Email: [email protected] Sincerely, Nelna inc. FCC US AGENT,LLC Heewon Jang / Manager Tim Payne [U.S. Agent signature]
Office of Engineering and Technology Laboratory Division Equipment Authorization Branch Federal Communications Commission Laboratory 7435 Oakland Mills Road Columbia, MD 21046 Confidentiality Request regarding application for certification of FCC ID:2BUL4-NA-P01 Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, we hereby request confidential treatment of information accompanying this application as outlined below: Exhibit Type File name Block diagram Circuit Description Operational Description Part list CONF APPENDIX_NA-P01_BLK CONF APPENDIX_NA-P01_SCH CONF APPENDIX_NA-P01_Operation Description CONF APPENDIX_NA-P01_BOM The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 and 0.459 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, Date: 2026. 01. 23. Heewon Jang / Manager #402, 16 Pildong-ro, Jung-gu, Seoul, 04626, Republic of Korea Tel: 82-070-8064-2797
Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 2026. 01. 23. SUBJECT: FCC Application for FCC ID: 2BUL4-NA-P01 To Whom It May Concern: We, the undersigned, hereby authorize Heon-ho Lee at Bureau Veritas CPS Korea Tech Limited on our behalf, to apply to the Federal Communications Commission on our equipment. Any and all acts carried out by Heon-ho Lee at Bureau Veritas CPS Korea Tech Limited on our behalf shall have the same effect as acts of our own. Sincerely, Heewon Jang / Manager #402, 16 Pildong-ro, Jung-gu, Seoul, 04626, Republic of Korea Tel: 82-070-8064-2797
Bureau Veritas CPS Korea Tech Limited (Annyeong-dong) 26, 28, 30, Seja-ro 406beon-gil, Hwaseong-si, Gyeonggi-do, Republic of Korea Tel:031-222-4251, Fax: Page: 1 / 4 Appendix 2. Photographs of EUT [External View] [Front] [Rear] Bureau Veritas CPS Korea Tech Limited (Annyeong-dong) 26, 28, 30, Seja-ro 406beon-gil, Hwaseong-si, Gyeonggi-do, Republic of Korea Tel:031-222-4251, Fax: Page: 2 / 4 [Top] [Bottom] Bureau Veritas CPS Korea Tech Limited (Annyeong-dong) 26, 28, 30, Seja-ro 406beon-gil, Hwaseong-si, Gyeonggi-do, Republic of Korea Tel:031-222-4251, Fax: Page: 3 / 4 [Left] [Right] Bureau Veritas CPS Korea Tech Limited (Annyeong-dong) 26, 28, 30, Seja-ro 406beon-gil, Hwaseong-si, Gyeonggi-do, Republic of Korea Tel:031-222-4251, Fax: Page: 4 / 4 [Antenna] BLANK
Bureau Veritas CPS Korea Tech Limited (Annyeong-dong) 26, 28, 30, Seja-ro 406beon-gil, Hwaseong-si, Gyeonggi-do, Republic of Korea Tel:031-222-4251, Fax: Page: 1 / 1 Appendix 4. Sample Label & Location Label Information The following is a sample copy of the label that will be placed on back side of the product. The FCC ID is marked in the product label and below information is visible printed on the label. Label location The label shown above shall be permanently affixed at a conspicuous location on the device and be readily visible to the user at the time purchase. The label is located here.
Bureau Veritas CPS Korea Tech Limited (Annyeong-dong) 26, 28, 30, Seja-ro 406beon-gil, Hwaseong-si, Gyeonggi-do, Republic of Korea Tel:031-222-4251, Fax: Pa g e: 1 / 3 Appendix 3. Photographs of EUT [Internal View] [Inside] Bureau Veritas CPS Korea Tech Limited (Annyeong-dong) 26, 28, 30, Seja-ro 406beon-gil, Hwaseong-si, Gyeonggi-do, Republic of Korea Tel:031-222-4251, Fax: Pa g e: 2 / 3 [Main board_Top] Bureau Veritas CPS Korea Tech Limited (Annyeong-dong) 26, 28, 30, Seja-ro 406beon-gil, Hwaseong-si, Gyeonggi-do, Republic of Korea Tel:031-222-4251, Fax: Pa g e: 3 / 3 [Main board_Bottom]
MPE Calculation / RF Exposure Product: nelna pencil for iPad Applicant: Nelna inc. Model: NA-P01 Address: #402, 16 Pildong-ro, Jung-gu, Seoul, 04626, Republic of Korea FCC ID: 2BUL4-NA-P01 Per KDB 447498 D01 General RF Exposure Guidance v06 (10/23/2015) section 4.3.1 (a) Standalone SAR test exclusion threshold is applied; a) For 100 MHz to 6 GHz and test separation distances ≤ 50 mm, the 1-g and 10-g SAR test exclusion thresholds are determined by the following: [(max. power of channel, including tune-up tolerance, mW) / (min. test separation distance, mm)] ꞏ [√f(GHz)] ≤ 3.0 for 1-g SAR, and ≤ 7.5 for 10-g extremity SAR, where f(GHz) is the RF channel transmit frequency in GHz Power and distance are rounded to the nearest mW and mm before calculation The result is rounded to one decimal place for comparison The values 3.0 and 7.5 are referred to as numeric thresholds in step b) below Freq: BLE / 2 440 MHz Tune-up max. power : 0.53 dBm (1.13 mW) Min. Test separation distance : 5 mm SAR exclusion threshold: [1.13/5] x [√2.440] = 0.353 (=0.4, is rouned to one decimal place) * Tune-up tolerance : 0.5 dBm +/- 1.0 dB Therefore, the EUT was not evaluated as the value of SAR exclusion threshold was less than 3 per KDB 447498 D01 v06 section 4.3.1(a)
Report No.: BVT-RH-FCR-260001 BVTRF-FCR-RFT 2 / 30 Revision History of test report Date Report No. Revision Histoty 2026.01.23 BVT-RH-FCR-260001 Initial issue Report No.: BVT-RH-FCR-260001 BVTRF-FCR-RFT 3 / 30 Contents 1. INFORMATION OF TESTING LABORATORY ......................................................................................................... 4 2 SUMMARY OF TEST RESULTS ............................................................................................................................ 5 2.1 DECISION RULES FOR STATEMENT OF CONFORMITY .................................................................................................................... 6 2.2 MEASUREMENT UNCERTAINTY ............................................................................................................................................................ 6 3 GENERAL INFORMATION ..................................................................................................................................... 7 3.1 GENERAL DESCRIPTION OF EUT ....................................................................................................................................................... 7 3.2 TESTED SAMPLE AND TESTED COMPANION DEVICE INFORMATION ............................................................................................. 7 3.3 DESCRIPTION OF TEST MODE ............................................................................................................................................................. 8 3.4 INSTRUMENT CALIBRATION ....................................................................................................................................................... 8 3.5 EUT CONFIGURATION .................................................................................................................................................................... 8 3.6 GENERAL DESCRIPTION OF APPLIED STANDARDS ........................................................................................................................ 8 3.7 TEST EQUIPMENT ................................................................................................................................................................................... 9 3.8 USED TEST CABLE ................................................................................................................................................................................ 9 4 TEST RESULTS .................................................................................................................................................... 10 4.1 Max. Conducted output power ............................................................................................................................ 10 4.2 Power spectral density ............................................................................................................................................ 13 4.3 6 dB spectrum Bandwidth ..................................................................................................................................... 16 4.4 Band-edge Compliance of RF Conducted emissions ............................................................................. 19 4.5 Spurious RF Radiated emissions ...................................................................................................................... 23 4.6 Antenna requirement ................................................................................................................................................ 30 Report No.: BVT-RH-FCR-260001 BVTRF-FCR-RFT 4 / 30 1. Information of Testing Laboratory Legal Name and address Bureau Veritas CPS Korea Tech Limited (Annyeong-dong) 26, 28, 30, Seja-ro 406beon-gil, Hwaseong-si, Gyeonggi-do, 18326, Republic of Korea Website: http://www.bvcpskoreatech.co.kr Registration information - KOLAS No.: KT232 - RRA No.: KR0041 - Test Leb No.: 491470 - A2LA No.: 4068.02, 4068.03 - FCC Designation No.: KR0041 - ISED CAB ID.: KR0041 - VCCI Membership No.: 2005 Test location and address Hwaseong (Annyeong-dong) 26, 28, 30, Seja-ro 406beon-gil, Hwaseong-si, Gyeonggi-do, 18326, Republic of Korea Tel: 82-31-222-4251 Anyang Heungan-daero 49, Dongan-gu, Anyang-si, Gyeonggi-do, 14119, Republic of Korea Tel: +82-31-689-4110, Fax: +82-31-689-4120 Report No.: BVT-RH-FCR-260001 BVTRF-FCR-RFT 5 / 30 2 Summary of Test Results The EUT has been tested according to the following specifications Applied Standard : FCC Part 15, Subpart C 15.247 FCC Part Section(s) Test Description Limit Test Condition Test Result Reference 15.247(b)(3) Max. Conducted output power <30 dBm Conduted PASS Section 4.1 15.247(e) Power spectral density <8 dBm/3kHz Conduted PASS Section 4.2 15.247(a)(2) 6 dB spectrum Bandwidth >0.5 MHz Conduted PASS Section 4.3 15.247(d) Band edge of RF conducted emissions FCC 15.247(d) Conduted PASS Section 4.4 15.247(d), 15.209(a) Spurious RF radiated emissions FCC 15.247(d), 15.209(a) Radiated PASS Section 4.5 15.203, 15.247(b) Antenna requirement FCC 15.203 - PASS Section 4.6 15.207 AC Power Conducted emissions FCC 15.207 - - - 1) The test is not applicable because the EUT will be installed in vehicles and will not be connected to the public utility (AC) power line Report No.: BVT-RH-FCR-260001 BVTRF-FCR-RFT 6 / 30 2.1 Decision Rules for Statement of Conformity QUA-52 Decision Rule(QA Document) was applied. Step 1) : Reference Check, Daily Check, Peripheral device Check Step 2) : Re-test Procedure (Repeat the test maximum 3 times, Different Test Engineer) 1) If the original test results are subject to retesting and the judgement is unclear, the retest is carried out. 2) If the result of the first retest is the same as the initial test, the judgement is made based on the value. 3) If the result of the first retest differ from the results of the initial test, the second re-test is carried out. 4) After completion of the second r…
Text truncated - open the document above for the full version.
Antenna Specification Summary ITEM ANT SPEC Model Name 2.4G ANT Horizontal Vertical Center 2400MHz 2400MHz2500MHz2400MHz2400MHz 2500MHz Frequency -1.26 -0.76 -0.58 -5.25 -2.46 -1.86 MAX. Gain -0.58dBi Polarization Horizontal and Vertical Azimuth Beam Pattern Omni-directional Impedance 50 Ohm Antenna Length 38.20mm Manufacture ZHUHAI JIELI TECHNOLOGY CO.,LTD Antenna Photo & Length (mm) Horizontal: 2400 MHz 2450 MHz 2500 MHz Power (dBm) Max: 0 Min: -40 Scale: 5/div Frequency Gain(dBi) (MHz) Max Min Avg 2400 -1.26174 -30.0801 -7.18716 2450 -0.765802 -36.5604 -7.48023 2500 -0.585582 -22.0315 -6.59127 Vertical: 2400 MHz 2450 MHz 2500 MHz Power (dBm) Max: 0 Min: -30 Scale: 5/div Frequency Gain(dBi) (MHz) Max Min Avg 2400 -5.2537 -22.1424 -12.4294 2450 -2.4652 -24.5837 -10.4702 2500 -1.86120 -29.5214 -9.20432 ANT Test Labs:Attestation of Global Compliance Co., Ltd.
Bureau Veritas CPS Korea Tech Limited (Annyeong-dong) 26, 28, 30, Seja-ro 406beon-gil, Hwaseong-si, Gyeonggi-do, Republic of Korea Tel:031-222-4251, Fax: Pa g e: 1 / 2 Appendix 1. Photographs of test setup Radiated RF measurement (Below 1 GHz) Bureau Veritas CPS Korea Tech Limited (Annyeong-dong) 26, 28, 30, Seja-ro 406beon-gil, Hwaseong-si, Gyeonggi-do, Republic of Korea Tel:031-222-4251, Fax: Pa g e: 2 / 2 Radiated RF measurement (Above 1 GHz)
3722 Illinois Avenue · Saint Charles, Illinois, 60174 · United States
| # | Rule Parts | Frequency Range | Power Output |
|---|---|---|---|
| 1 | 15C | 2.40 GHz - 2.48 GHz | 1.13 mW |