Text extracted from the exhibit documents filed with the FCC. Open a document above to read the original.
2.911 (d)(5)(i) Equipment Type Attestation v1.2 Temple Private Limited (formerly known as Continue Lifesciences Private Limited and prior to that Upslope Advisors Private Limited) CIN: U26400HR2024PTC120507 Registered Address: 4th Floor, A-1/03, Sushant Lok 2, Sector 55, Gurgaon, Haryana – 122011 Contact Number: +91-9871300111 Email Address: [email protected] Section 2.911(d)(5)(i) Certification – Equipment Type Company name: Temple Pvt. Ltd. Address: A1/03, A1 Block, 04Th Floor, Sushant Lok Phase-2, Sector 55, Gurgaon Haryana, 122011, India Product Name: Wellness and Fitness Wearable Device FCC ID: 2BUOQ-TD1 Model(s): TD1X (where X can be null or alphanumeric character represents non-technical and aesthetical changes) 2.911(d)(5)(i) Equipment Type We, Temple Pvt. Ltd. (“the applicant”) certify that the equipment for which authorization is sought through certification is not: ● Prohibited from receiving an equipment authorization pursuant to § 2.903; of the FCC rules. ● Identified as an equipment type in the “Covered List” NOTE 1 Yours sincerely, Name: Akriti Mehta Date: 13th March 2026 Title and Company name: Director, Temple Pvt. Ltd. NOTE 1 “Covered List”; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References; 1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to- the-communications-supply-chain-through-the
2.911 (d)(5)(ii) Applicant Attestation v1.3 Temple Private Limited (formerly known as Continue Lifesciences Private Limited and prior to that Upslope Advisors Private Limited) CIN: U26400HR2024PTC120507 Registered Address: 4th Floor, A-1/03, Sushant Lok 2, Sector 55, Gurgaon, Haryana – 122011 Contact Number: +91-9871300111 Email Address: [email protected] Section 2.911(d)(5)(ii) Certification – Applicant (Covered List) Company name: Temple Pvt. Ltd. Address: A1/03, A1 Block, 04Th Floor, Sushant Lok Phase-2, Sector 55, Gurgaon Haryana, 122011, India Product Name: Wellness and Fitness Wearable Device FCC ID: 2BUOQ-TD1 Model(s): TD1X (where X can be null or alphanumeric character represents non-technical and aesthetical changes). 2.911(d)(5)(ii) Applicant filing We, Temple Pvt. Ltd. (“the applicant”) certify that, as of the date of the filing of the application, the applicant is not identified on the “Covered List” NOTE 2 , established pursuant to § 1.50002 of this chapter, as an entity producing covered communications equipment. Yours sincerely, Name: Akriti Mehta Date: 13th March 2026 Title and Company name: Director, Temple Pvt. Ltd. NOTE 2 “Covered List”; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References; 1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to- the-communications-supply-chain-through-the
Temple Private Limited (formerly known as Continue Lifesciences Private Limited and prior to that Upslope Advisors Private Limited) CIN: U26400HR2024PTC120507 Registered Address: 4th Floor, A-1/03, Sushant Lok 2, Sector 55, Gurgaon, Haryana – 122011 Contact Number: +91-9871300111 Email Address: [email protected] U.S. Agent Designation for Service of Process ATTENTION: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA REGARDING: FCC Certification – Section 2.911(d)(7) Information Designated U.S. Agent Company Name: Approve-IT, Inc. Contact Name: Nathan Grinager Street Address: 8011 34 th Ave South, Suite 342 City/Province/Zip: Bloomington, MN 55425 Telephone No: 651-247-1678 Email: [email protected] FRN #: 0027533835 This letter is to confirm that we (“the Designated U.S. Agent) have accepted the responsibility to act as the Designated U.S. Agent for Service of Process as required by section 47 CFR 2.911(d)(7) on behalf of the Applicant noted below. U.S. Agent Signature: Date: February 27, 2026 Signed by (Printed Name/Title): Nathan Grinager / Co-President The Applicant confirms its explicit consent and acknowledges that they must maintain an agent for no less than one year after terminating all marketing and importation OR the conclusion of any Commission-related proceeding involving the equipment. The applicant further acknowledges their responsibility to inform the FCC whenever the Designated U.S. Agent information above changes. Applicant Company name: Temple Pvt. Ltd. Grantee FRN: 0037942968 Grantee Code: 2BUOQ FCC ID: 2BUOQ-TD1 Contact Name: Akriti Mehta Street Address: A1/03, A1 Block, 04Th Floor, Sushant Lok Phase-2, Sector 55 City/Province/Zip: Gurgaon Haryana, 122011, India Telephone No: +91 98713 00111 Email: [email protected] Applicant Signature: Date: 26th February 2026 Signed by (Printed Name/Title): Akriti Mehta, Director
Temple Private Limited (formerly known as Continue Lifesciences Private Limited and prior to that Upslope Advisors Private Limited) CIN: U26400HR2024PTC120507 Registered Address: 4th Floor, A-1/03, Sushant Lok 2, Sector 55, Gurgaon, Haryana – 122011 Contact Number: +91-9871300111 Email Address: [email protected] Akriti Mehta Letter of Authorization Company: Temple Pvt. Ltd. Address: A1/03, A1 Block, 04Th Floor, Sushant Lok Phase-2, Sector 55, Gurgaon Haryana, 122011, India Product Name: Wellness and Fitness Wearable Device Model Number(s): TD1X (where X can be null or alphanumeric character represents non-technical and aesthetical changes) Product Description: Temple is a wellness & fitness wearable device, worn on the temple, that collects physiological data to calculate physical and cognitive health metrics and other proprietary metrics. We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature: Date: 13th March 2026 Name: Title: Director Company: Temple Pvt. Ltd.
Temple Private Limited (formerly known as Continue Lifesciences Private Limited and prior to that Upslope Advisors Private Limited) CIN: U26400HR2024PTC120507 Registered Address: 4th Floor, A-1/03, Sushant Lok 2, Sector 55, Gurgaon, Haryana – 122011 Contact Number: +91-9871300111 Email Address: [email protected] Responsibility Declaration Letter Company name: Temple Pvt. Ltd. Address: A1/03, A1 Block, 04Th Floor, Sushant Lok Phase-2, Sector 55, Gurgaon Haryana, 122011, India Product Name: Wellness and Fitness Wearable Device FCC ID: 2BUOQ-TD1 Model(s): TD1X Model(s) Difference Description: X, where X can be null or alphanumeric character represents non- technical and aesthetical changes. We, Temple Pvt. Ltd., hereby acknowledge that all the product information (including all original, drafted, or modified documents) provided to the TCB either by us or our agent or representative(s) for the purposes of FCC certification will meet FCC regulations and requirements; and that any modifications or changes made as a result of TCB review of the documents will be formally implemented into the manufacturing process and product documentation shipped with equipment. We also confirm that all information provided is legitimate and does not contain any false content such as forgery, fabrication, alteration, tampering and concealment. We assume all economic and legal responsibilities in matters that may arise as a result of disclosure on sample products and associated product documentation provided for product certification that may subsequently be found to be a mis-representation of the final product and accompanying documentation when produced, marketed, or sold in the United States, Canada, or anywhere in the world. Your sincerely, Name: Akriti Mehta Date: 13th March 2026 Title and Company name: Director, Temple Pvt. Ltd. Signature of FCC grant holder (Include Title, Company name, date, and official company stamp):
TEST REPORT Page 1 of 9 Report Reference No. ....................... : 80260100020001 Sample ID ......................................... : BLC-01-0990568-005 Date of issue ..................................... : 16/02/2026 Total number of pages ...................... : 9 Testing Laboratory ............................ : TUV SUD South Asia Pvt Ltd Address............................................. : Plot No. 3-P1-B, Hitech Defence & Aerospace Park, KIADB Industrial Area, BK Palya, Bengaluru, Bengaluru North Taluk | Pin code – 562149 India Applicant’s name .............................. : Temple Private Limited Address............................................. : A1/03, A1 Block, 04Th Floor, Sushant Lok Phase-2, Sector 55, Gurgaon Haryana, 122011, India Client Representative................ ... .: Akriti Mehta Test specification Standard............: RF Exposure Report FCC 47 CFR Part 2.1093 / ISED RSS-102 Issue 6 Test Method ...................................... : FCC KDB 447498 and RSS-102 Issue 6 Non-standard test method............. : NA Test Report Form Number.............: LAB_F(EE)_138-049 Product Name..............................: Temple Test Item Description.....................: The EUT is a battery-powered wearable incorporating a 2.4 GHz BLE transmitter (2402–2480 MHz) with an integral internal antenna for data communication with a mobile application. Manufacturer ...............................: Temple Private Limited Model Number..............................: TD1T Serial Number..............................: VM06U Ratings........................................: 3.3V DC FCC ID.......................................: 2BUOQ-TD1 IC ID..........................................: 35218-TD1 Prepared by (Name + Signature) ..........................: Nikhil G Reviewed & Approved by (Name + Signature) ..........................: Raghunath M N TEST REPORT Report Reference. No.: 80260100020001 Page 2 of 9 Possible test case verdicts: - test case does not apply to the test object .... : N/A - test object does meet the requirement .......... : Pass - test object does not meet the requirement .... : Fail Testing: Condition of the EUT on Receipt.....................: Good Date of receipt of test item ............................... : 02/02/2026 Date (s) of performance of tests....................... : 03/02/2026 to 04/02/2026 General remarks: 1. The submitted sample(s) were not drawn by laboratory. 2. The test results presented in this report relate only to the object tested. 3. The results contained in this report reflect the results for this particular model and serial number. It is the responsibility of the manufacturer to ensure that all production models meet the intent of the requirements detailed within this report. 4. The correctness of the information related to sample(s) in the Test Request Form/Customer letterhead/E-mail is the customer’s responsibility. The laboratory reports the said information in the test report and is not liable for the same. 5. The laboratory will retain the sample(s) for 45 days except for the mandatory retention period specified by the Regulatory Bodies and unless otherwise specified by the client. 6. This report shall not be reproduced, except in full, without the written approval of the Issuing testing laboratory. “(see Enclosure #)” refers to additional information appended to the report. “(see appended table)” refers to a table appended to the report. 7. Throughout this report a point is used as the decimal separator. Use of uncertainty of measurement for decisions on conformity (decision rule): Yes/No No decision rule is specified by the IEC/EN standard, when comparing the measurement result with the applicable limit according to the specification in that standard. The decisions on conformity are made without applying the measurement uncertainty (“simple acceptance” decision rule, previously known as “accuracy method”). Other: (to be specified) Decisions on conformity: Decision on conformity of results is based on as per standard limits or criteria. Summary of compliance: The Product comply with the requirements of FCC 47 CFR Part 2.1093 / ISED RSS-102 Issue 6 TEST REPORT Report Reference. No.: 80260100020001 Page 3 of 9 Revision History of Records Test Report Number Version Reason for Change Date Issued 80260100020001 01 Initial Report 16/02/2026 TEST REPORT Report Reference. No.: 80260100020001 Page 4 of 9 CONTENTS 1 TEST SUMMARY .................................................................................................................................................................... 5 2 EQUIPMENT INFORMATION .................................................................................................................................................. 6 2.1 PRODUCT FUNCTION ............................................................................................................................................................. 6 2.2 GENERAL INFORMATION OF EUT ............................................................................................................................................. 6 3 RF EXPOSURE EVALUATION METHOD ................................................................................................................................... 7 3.1 FCC SAR TEST EXCLUSION EVALUATION ........................................................................................................................... 7 3.2 ISED SAR EXEMPTION EVALUATION ................................................................................................................................. 8 4 RESULTS SUMMARY .............................................................................................................................................................. 9 5 CONCLUSION .............................................................................................................................................................…
Text truncated - open the document above for the full version.
Approval sheet Page 1 of 12 ASC_RFECA3216060A1T_V09 Aug. 2018 RFECA Series – RoHS Compliance CERAMIC ANTENNA Halogens Free Product 2.4 GHz ISM Band RF Application P/N: RFECA3216060A1T *Contents in this sheet are subject to change without prior notice. Approval sheet Page 2 of 12 ASC_RFECA3216060A1T_V09 Aug. 2018 FEATURES 1. Surface Mounted Devices with a small dimension of 3.2 X 1.6 X 0.6 mm 3 meet future miniaturization trend. 2. LTCC process. 3. High stability in Temperature / Humidity Change. 4. Superb performance to place on the middle of PCB edge and excellent peak/ average gain observed by field test application. APPLICATIONS 1. ISM Band 2.4GHz applications. 2. Bluetooth.. CONSTRUCTION DIMENSIONS Figure Symbol Dimension (mm) L 3.10 ± 0.20 W 1.60 ± 0.20 T 0.60 ± 0.10 A 0.25 ± 0.20 PINConnection 1 Feeding 2 Soldering terminal Approval sheet Page 3 of 12 ASC_RFECA3216060A1T_V09 Aug. 2018 SOLDER LAND PATTERN DESIGN Type-1: Empty Space 8.0mm x 3.0 mm Figure (Empty Space 8.0 mm x 3.0 mm) The limited size for ECA3216 is L>30mm and D>6mm Land Pattern TYPE-1 TEST BOARD ELECTRONIC CHARACTERISTICS *Note 1. Central Frequency should be defined after customers’ application approval. Item Specification Working Frequency Range 2.4GHz~2.4835GHz (Note-1) Gain 2 dBi (Typical) VSWR 2.0 max. Polarization Linear Azimuth Beamwidth Omni-directional Impedance 50 Power Capacity 3 W max. Maximum Input Power 5 Watts for 5 minutes Approval sheet Page 4 of 12 ASC_RFECA3216060A1T_V09 Aug. 2018 Type-2: Empty Space 6.3mm x 4.0 mm Figure (Empty Space 6.3 mm x 4.0 mm) The limited size for ECA3216 is L>30mm and D>6mm Land Pattern TYPE-2 TEST BOARD ELECTRONIC CHARACTERISTICS *Note 1. Central Frequency should be defined after customers’ application approval. Item Specification Working Frequency Range 2.4GHz~2.4835GHz (Note-1) Gain 2 dBi (Typical) VSWR 2.0 max. Polarization Linear Azimuth Beamwidth Omni-directional Impedance 50 Power Capacity 3 W max. Maximum Input Power 5 Watts for 5 minutes Approval sheet Page 5 of 12 ASC_RFECA3216060A1T_V09 Aug. 2018 Antenna on Type-1 Test Board ( Empty Space 8x3 mm &Thick ness 0.8mm) Antenna S11 on Type-1 Test Board Antenna VSWR on Type-1 Test Board 1.782 @ 2.40 GHz 1.328 @ 2.45 GHz 1.816 @ 2.50 GHz -11.0208 dB @ 2.40 GHz -17.0222 dB @ 2.45 GHz -10.7612 dB @ 2.50 GHz Approval sheet Page 6 of 12 ASC_RFECA3216060A1T_V09 Aug. 2018 Antenna on Type-2 Test Board ( Empty Space 6.3x4 mm &Thick ness 0.8mm) Antenna S11 on Type-2 Test Board Antenna VSWR on Type-2 Test Board 1.453 @ 2.40 GHz 1.216 @ 2.45 GHz 1.732 @ 2.50 GHz -14.6741 dB @ 2.40 GHz -20.2120 dB @ 2.45 GHz -11.4374 dB @ 2.50 GHz Approval sheet Page 7 of 12 ASC_RFECA3216060A1T_V09 Aug. 2018 RADIATION PATTERN Radiation Pattern and Gain were dependent on measurement board design. The specification of RFECA3216060A1T antenna was measured based on the PCB size and installation position as shown in the below figure Test Board. Antenna on Type-1 Test Board ZX plane ZY plane XY plane Frequency [MHz] Max Value [dB] Average [dB] Max Value [dB] Average [dB] Max Value [dB] Average [dB] 2400 0.29 -3.32 1.82 -0.51 1.49 -2.87 2450 0.55 -2.88 2.09 -0.21 1.95 -2.48 2500 -0.15 -3.44 1.82 -0.62 1.82 -2.73 Approval sheet Page 8 of 12 ASC_RFECA3216060A1T_V09 Aug. 2018 Antenna on Type-2 Test Board ZX plane ZY plane XY plane Frequency [MHz] Max Value [dB] Average [dB] Max Value [dB] Average [dB] Max Value [dB] Average [dB] 2400 1.57 -2.83 1.95 -0.76 1.10 -2.93 2450 1.70 -2.62 2.02 -0.62 1.57 -2.61 2500 1.46 -2.82 1.90 -0.71 1.75 -2.68 Approval sheet Page 9 of 12 ASC_RFECA3216060A1T_V09 Aug. 2018 RELIABILITY TEST Test item Test condition / Test method Specification Solderability JIS C 0050-4.6 JESD22-B102D *Solder bath temperature：235 5C *Immersion time：2 0.5 sec Solder：Sn3Ag0.5Cu for lead-free At least 95% of a surface of each terminal electrode must be covered by fresh solder. Leaching (Resistance to dissolution of metallization) IEC 60068-2-58 *Solder bath temperature：260 5C *Leaching immersion time：30 0.5 sec Solder : SN63A Loss of metallization on the edges of each electrode shall not exceed 25%. Resistance to soldering heat JIS C 0050-5.4 *Preheating temperature：120~150°C, 1 minute. *Solder temperature：2705C *Immersion time：101 sec Solder：Sn3Ag0.5Cu for lead-free Measurement to be made after keeping at room temperature for 242 hrs No mechanical damage. Electrical specification shall satisfy the descriptions in electrical characteristics under the operational temperature range within -40 ~ 85°C. Loss of metallization on the edges of each electrode shall not exceed 25%. Drop Test JIS C 0044 Customer’s specification. *Height：75 cm *Test Surface：Rigid surface of concrete or steel. *Times：6 surfaces for each units；2 times for each side. No mechanical damage. Electrical specification shall satisfy the descriptions in electrical characteristics under the operational temperature range within -40 ~ 85°C. Vibration JIS C 0040 *Frequency：10Hz~55Hz~10Hz(1min) *Total amplitude：1.5mm *Test times：6hrs.(Two hrs each in three mutually perpendicular directions) No mechanical damage. Electrical specification shall satisfy the descriptions in electrical characteristics under the operational temperature range within -40 ~ 85°C. Adhesive Strength of Termination JIS C 0051- 7.4.3 *Pressurizing force： 5N(≦0603)；10N(>0603) *Test time：10±1 sec No remarkable damage or removal of the termination. Approval sheet Page 10 of 12 ASC_RFECA3216060A1T_V09 Aug. 2018 Bending test JIS C 0051- 7.4.1 The middle part of substrate shall be pressurized by means of the pressurizing rod at a rate of about 1 mm/s per second until the deflection becomes 1mm/s and then pressure shall be maintained for 51 sec. Measurement to be made after keeping at room temperature for 242 hours No mechanical damage. Electrical specification shall satisfy the descriptions in electrical characteristics under the operational temperature range within -40 ~ 85°C. Temperature cycle JIS C 0025 1. 30…
Text truncated - open the document above for the full version.
TEST REPORT Page 1 of 37 Report Reference No. ...................... : 80260100019001 Sample ID ........................................ : BLC-01-0990568-005 Date of issue .................................... : 16/02/2026 Total number of pages ..................... : 37 Testing Laboratory ........................... : TUV SUD South Asia Pvt Ltd Address ............................................ : Plot No. 3-P1-B, Hitech Defence & Aerospace Park, KIADB Industrial Area, BK Palya, Bengaluru, Bengaluru North Taluk | Pin code – 562149 India Applicant’s name .............................. : Temple Private Limited Address ............................................ : A1/03, A1 Block, 04Th Floor, Sushant Lok Phase-2, Sector 55, Gurgaon Haryana, 122011, India Client Representative....................: Akriti Mehta Test specification Standard............: FCC Part 15 Subpart C 15.203, 15.205, 15.209 & 15.247 RSS 247 Issue 4, RSS Gen Issue 5 Test Method ..................................... : ANSI C63.10-2020 Non-standard test method............. : NA Test Report Form Number.............: LAB_F(EE)_138-51 Product Name..............................: Temple Test Item Description.....................: The EUT is a battery-powered wearable incorporating a 2.4 GHz BLE transmitter (2402–2480 MHz) with an integral internal antenna for data communication with a mobile application. Manufacturer ...............................: Temple Private Limited Model Number..............................: TD1T Serial Number..............................: VM06U Ratings........................................: 3.3V DC FCC ID.......................................: 2BUOQ-TD1 IC ID..........................................: 35218-TD1 Tested by (Name + Signature) ..........................: Nikhil G Reviewed & Approved by (Name + Signature) ..........................: Raghunath M N TEST REPORT Report Reference. No.: 80260100019001 Page 2 of 37 Possible test case verdicts: - test case does not apply to the test object .... : N/A - test object does meet the requirement .......... : Pass - test object does not meet the requirement .... : Fail Testing: Condition of the EUT on Receipt.....................: Good Date of receipt of test item ............................... : 02/02/2026 Date (s) of performance of tests....................... : 03/02/2026 to 04/02/2026 General remarks: 1. The submitted sample(s) were not drawn by laboratory. 2. The test results presented in this report relate only to the object tested. 3. The results contained in this report reflect the results for this particular model and serial number. It is the responsibility of the manufacturer to ensure that all production models meet the intent of the requirements detailed within this report. 4. The correctness of the information related to sample(s) in the Test Request Form/Customer letterhead/E-mail is the customer’s responsibility. The laboratory reports the said information in the test report and is not liable for the same. 5. The laboratory will retain the sample(s) for 45 days except for the mandatory retention period specified by the Regulatory Bodies and unless otherwise specified by the client. 6. This report shall not be reproduced, except in full, without the written approval of the Issuing testing laboratory. “(see Enclosure #)” refers to additional information appended to the report. “(see appended table)” refers to a table appended to the report. 7. Throughout this report a point is used as the decimal separator. Use of uncertainty of measurement for decisions on conformity (decision rule): Yes/No No decision rule is specified by the IEC/EN standard, when comparing the measurement result with the applicable limit according to the specification in that standard. The decisions on conformity are made without applying the measurement uncertainty (“simple acceptance” decision rule, previously known as “accuracy method”). Other: (to be specified) Decisions on conformity: Decision on conformity of results is based on as per standard limits or criteria. Summary of compliance: The Product comply with the requirements of FCC Part 15 Subpart C 15.203, 15.205, 15.209 & 15.247 / RSS 247 Issue 4, RSS Gen Issue 5 TEST REPORT Report Reference. No.: 80260100019001 Page 3 of 37 Revision History of Records Test Report Number Version Reason for Change Date Issued 80260100019001 01 Initial Report 16/02/2026 TEST REPORT Report Reference. No.: 80260100019001 Page 4 of 37 Contents 1 GENERAL INFORMATION ....................................................................................................................................................... 5 1.1 APPENDICES ......................................................................................................................................................................... 5 2 TEST SUMMARY .................................................................................................................................................................... 6 3 MEASUREMENT UNCERTAINTY ............................................................................................................................................. 7 4 TEST EQUIPMENT USED ......................................................................................................................................................... 7 5 EQUIPMENT INFORMATION .................................................................................................................................................. 8 5.1 PRODUCT FUNCTION ............................................................................................................................................................. 8 5.2 GENERAL INFORMATION OF EUT ............................................................................................................................................. 8 6 TEST DESCRIPTION ..........................................................................…
Text truncated - open the document above for the full version.
8011 34th Ave South · Bloomington, Minnesota, 55425 · United States
| # | Rule Parts | Frequency Range | Power Output |
|---|---|---|---|
| 1 | 15C | 2.40 GHz - 2.48 GHz | 3.00 mW |