2BUOU-HARHOERSBaby Swing

Thank you for purchasing the company's products,for your due rights and interests, please take good care of the warranty card,if there are product quality problems, please contact the dealer. Note: 1.From the date of purchase,normal users,circuit board components enjoy one year free maintenance service,the whole machine enjoys one year free maintenance service, the product shellplastic is not within the scope of warranty; 2.Other consumables are not covered by warranty; 3.Please show the warranty card and purchase proof or invoice to be valid. Non-warranty coverage: 1.Damage caused by careless or wrong use and human caused; 2.The warranty card is lost or damaged; 3.Damage caused by irresistible forces such as natural disasters, This warranty card is only one copy,please keep it properly to prevent loss Warranty Card(Customer storage) Product model Customer name Product name Contact information Date of purchase Fault description Customer address BABY ELECTRIC ROCKING CHAIR Instruction manual Please read the instructions carefully before using this product and keep it properly. If you do not follow this instruction manual,it may affect the safety of your baby After-Sales Service ①Toy ×2,②pillow×1,③mosquito net x1,④seat cloth x1,⑤remote control x1, ⑥adapter x1.USB cablex1,⑦Mount x1,⑧Base x1(USB cable:DC round hole inserted into the host,USB end inserted into the adapter). Note:Please check whether the parts are complete before use. ⑤ ⑥ —3— Swing lock: 1.Push down to lock,rocking chair can not swing(slight swing, is a normal phenomenon). 2.Dial up to restore the swing. Switch key Timing keying MUSICIANS Play/pause Previous song Next song Volume increase Swing,five gears Sleep mode:Press to enter sleep mode,adjust the swing to the second gear and time for 15 minutes. Stop rocking:Press stop rocking and press any gear key to resume rocking. 1.DC plug can be inserted into 100-240V~50/60Hz AC power supply. 2.The DC port can be connected to the power supply of the charging bank (the output of the charging bank is 5V/1A) 3.Adapter output parameters:voltage is 5V,current is 1A. ● Power terminal shall not short circuit. ● It is forbidden to use adapters other than those provided with this product to power the product. ●When using the adapter,keep the adapter and dataline away from chldren,and prohibit children from playing. ● The adapter used by the rocking chair should be regularly checked the data cable jack, accessories and other parts. ●Stop using if there is any damage. —8— Matters needing attention Power supply mode Remote control unit Swing lock key Product list Product Information aL Volume reduction Installation:Insert the bottom pipe fitting"O"into the base connector"○". Remove:Pullout the metal plate at the rear end of the connection between the seat and the base,and pull out the seat upward. Click to play music,then click to turn off music. Open the mobile phone Bluetooth,connect "BT-BABY",after successful connection,you can play mobile phone music. The priority level is Bluetooth>Built-in music. Power buton: Aerpoerom te nacao entsa no te oe sunedon Press it,all the indicators are off,and the power is off. Turn on the induction swing,the child will automatically swing when he wakes up and turns Timing button: Press thefrst indicator to show 08 minutes Press the second light for 15 minutes Press the third light for 30 minutes +Swing ncrese pes tesun toioces thewatn 一 swing reduction: Press down to reduce the swing, —7— Install/remove the mount Installation Instructions Installation:1.Cover the seat cloth from the top of the seat frame,and fit the back button 2.Put the pillow Velcro through the fixing ring on the top of the seat rack and stick the Velcro onto it. Disassembly:1.Open the buckle and pull out the seat cloth.2.Tear the Velcro and pullout the pillow Key description Install/remove seat cloth and pillow HOW to Use buton play 4 — — —5— —6— 1 1.Insert the left and right foot pipes into the host,and ensure that the foot pipes are aligned wth the screw holes on the host 2.Secure the four foot screws. to avoid injury or ingestion! Adjust the backrest: Hold the top of the iron pipe with both hands and adjust it upward. Disassembly adjustment: press the selection buttons at both ends and push down to disassemble. Note:Infants and children are not allowed during the above operation.The picture is for installation illustration only,the product is subject to the actual object Installaion:1.Insert the toy Velcro into the middle fixing ring of the mosquito net and stick the Velcro onto it 2.After the toy is installed,buckle the mosquito net on both sides of the bed into the pipe fittings on both sides of the seat frame,and put the mosquito net into the bottom of the seat frame. Put the baby's legs on both sides of the triangle seat belt,and then turn the triangle seat belt over,adjust the tightness of the seat belt on both sides,and then close the safety buckle. Tips:To ensure the safety of your child,be sure to use the seat belt properly when the baby is lying in the rocking chair. Seat belt use Install/remove mosquito nets and toys Install/remove the mount —9— —2— ※When using this product,always use a seat belt! ※Do not leave unattended children in the product! ※Do not use toy sticks and canopy to lift or move the swing! ※Do not lift or move the product when the child is in it! ※ It is strictly forbidden to put anything on the toy stick and the roof except for supporting toys! ※ This product is strictly forbidden to be used at high places (such as: countertops,tables,stairs or other positions higher than the ground)to prevent falling! ※When using this product,please put this product on a flat surface,do not allow to use on a non-flat surface! ※Pay attention to choking danger:Please do not use on soft objects to prevent suffocation when overturned (such as beds,sofas,etc.)! ※ Please do not use it on babies who can sit up alone,to prevent potential accidents such as choking or strangling by …

Text truncated - open the document above for the full version.

Yiwu Chanli E-Commerce Firm U.S. Agent Letter of Attestation To: Federal Communications Commission 7435 Oakland Mills Road, Columbia, MD 21046, USA Date: February 5, 2026 Ref: Attestation Statement – Part 2.911(d)(7) filing FCC ID: 2BUOU-HARHOERS Yiwu Chanli E-Commerce Firm (“the applicant”) certifies that, as of the date of the filing of the application, CLF Import and Export Limited (“the agent”) is our designated U.S. agent for service of process for the above reference FCC ID. The applicant accepts to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. The applicant further acknowledges it is our responsibility to inform the FCC whenever the agent information changes. CLF Import and Export Limited ("the agent) understand it is the agent's obligation to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and email address. Designated U.S. Agent Company Name: CLF Import and Export Limited FRN: 0033489683 Address: 1312 17th Street #692, Denver, CO 80202, United States Signature: Contact Person: David Chen Tel: +1 949 254 2565 Email: [email protected] Applicant Company Name: Yiwu Chanli E-Commerce Firm FRN: 0037947157 Address: Room 201, Unit 3, Building 19, Qiaodong 3rd Zone, Jiangdong Street, Yiwu City, Jinhua, Zhejiang Province, China Signature: Contact Person: van nessa Tel: 0755-23284856 Email: [email protected]

Rev 1/26/2023 Yiwu Chanli E-Commerce Firm Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 01-05-2026 Ref: Attestation Statements Part 2.911(d)(5)(i) Filing FCC ID: 2BUOU-HARHOERS [Yiwu Chanli E-Commerce Firm] certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. [Yiwu Chanli E-Commerce Firm] certifies that the equipment for which authorization is sought does not include cybersecurity or anti-virus software produced or provided by Kaspersky Lab, Inc. or any of its successors and assignees, including equipment with integrated Kaspersky Lab, Inc. (or any of its successors and assignees) cybersecurity or anti-virus software pursuant to DA-24-886 and KDB 986446 D01 Covered Equipment Guidance section B(2a). Device is inherently compliant based on hardware limitations or software controls. or A Software Bill of Materials (SBOM) is provided to the TCB for review, and The end-user or third parties cannot install additional software on this device. Sincerely, (Applicant signature) (Applicant printed name) van nessa Rev 1/26/2023 Yiwu Chanli E-Commerce Firm Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 02-05-2026 Ref: Attestation Statements Part 2.911(d)(5)(ii) Filing FCC ID: 2BUOU-HARHOERS [Yiwu Chanli E-Commerce Firm] certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing “covered” equipment. Sincerely, (Applicant signature) (Applicant printed name) van nessa

Length * Width (18mm * 7.2mm) Manufacturer：Shenzhen Interm Electronic Technology Co., Ltd. Address：5th Floor, Building B, Zone D, Huayi Industrial Park, Dalang Subdistrict, Longhua New District, Shenzhen, China

Yiwu Chanli E-Commerce Firm Date: February 5, 2026 Product Model Number: Harhoers Electric baby swing for Babies FCC ID: 2BUOU-HARHOERS To whom it may concern, Re: Product Certification Representative Authorization Letter We authorize QAI Laboratories Ltd. 3980 North Fraser Way, Burnaby B.C. Canada V5J 5K5 to act on our behalf on all matters concerning the above named equipment. This shall include the following:  Testing  Approval applications and procedures We declare that QAI Laboratories Ltd. is allowed to forward all information related to the approval project to the applied certification body and to the notification entities and to discuss any issues concerning the approval application. Any and all acts carried out by QAI Laboratories Ltd. on our behalf shall have the same effect as acts of our own. By: van nessa Contact Listed on FCC Wesbite Title: Manager Email: [email protected] Telephone: 0755-23284856 On behalf of: Yiwu Chanli E-Commerce Firm

Yiwu Chanli E-Commerce Firm Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: February 5, 2026 Subject; Request for Confidentiality FCC ID: 2BUOU-HARHOERS To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description Tune-up Procedure Software Security Requirements for UNII devices It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: vannessa Title: Manager

Report No: SSP26010739-1E FCC ID: 2BUOU-HARHOERS Annex of Test Report Annex A. EUT External Photos Model: Harhoers Electric baby swing f or Babies EUT View 1 EUT View 2 Report No: SSP26010739-1E FCC ID: 2BUOU-HARHOERS Annex of Test Report EUT View 3 EUT View 4 Report No: SSP26010739-1E FCC ID: 2BUOU-HARHOERS Annex of Test Report EUT View 5 EUT View 6 Report No: SSP26010739-1E FCC ID: 2BUOU-HARHOERS Annex of Test Report EUT View 7 EUT View 8 Report No: SSP26010739-1E FCC ID: 2BUOU-HARHOERS Annex of Test Report EUT View 9 EUT View 10

Report No: SSP26010739-1E FCC ID: 2BUOU-HARHOERS Annex of Test Report Annex D. Label and Inf ormation FCC Label Sample FCC Label Specifications Text is Black in color and is justified. Labels are printed in indelible ink on permanent adhesive backing or silk-screened onto the EUT or shall be affixed at a conspicuous location on the EUT. Where the EUT is constructed in two or more sections connected by wires and marketed together, the above statement is required to be affixed only to the main control unit. When the EUT is so small or for such use that it is not practicable to place the statement on it, the above information shall be placed in a prominent location in the instruction manual or pamphlet supplied to the user or, alternatively, shall be placed on the container in which the device is marketed. FCC Label Location

Report No: SSP26010739-1E FCC ID: 2BUOU-HARHOERS Annex of Test Report Annex B. EUT Internal Photos Model: Harhoers Electric baby swing f or Babies EUT Internal View 1 EUT Internal View 2 Report No: SSP26010739-1E FCC ID: 2BUOU-HARHOERS Annex of Test Report EUT Internal View 3 EUT Internal View 4 PCB Antenna Report No: SSP26010739-1E FCC ID: 2BUOU-HARHOERS Annex of Test Report EUT Internal View 5

FCC ID: 2BUOU-HARHOERS RF Exposure Evaluation According to KDB 447498 D01 General RF Exposure Guidance v06 and part 2.1093，Unless specifically required by the published RF exposure KDB procedures, standalone 1-g head or body and 10-g extremity SAR evaluation for general population exposure conditions, by measurement or numerical simulation, is not required when the corresponding SAR Test Exclusion Threshold condition(s), listed below, is (are) satisfied. For 100 MHz to 6 GHz and test separation distances ≤ 50 mm, the 1-g and 10-g SAR test exclusion thresholds are determined by the following: [(max. power of channel, including tune-up tolerance, mW) / (min. test separation distance, mm)] · [√f(GHz)] ≤ 3.0 for 1-g SAR, and ≤ 7.5 for 10-g extremity SAR, where f(GHz) is the RF channel transmit frequency in GHz Power and distance are rounded to the nearest mW and mm before calculation The result is rounded to one decimal place for comparison Here, The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. For BR+EDR Max Conducted Power(dBm) Tune-up Power(dBm) Max Tune-up Power(dBm) Max Power(mW) Frequency(MHz) Min. distance(mm) Calc. thresholds limit 2.32 2(±1) 3 2 2402 5 0.619935 3.0 So a SAR test is not required

Report No: SSP26010739-1E FCC Test Report Page 1 of 51 FCC TEST REPORT FCC ID: 2BUOU-HARHOERS Report No. : SSP26010739-1E Applicant : Yiwu Chanli E-Commerce Firm Product Name : Baby Swing Model Name : Harhoers Electric baby swing for Babies Test Standard : FCC Part 15.247 Date of Issue : 2026-01-30 Shenzhen CCUT Quality Technology Co., Ltd. 1F, Building 35, Changxing Technology Industrial Park, Yutang Street, Guangming District, Shenzhen, Guangdong, China; (Tel.:+86-755-23406590 website: www.ccuttest.com) This test report is limited to the above client company and the product model only. It may not be duplicated without prior permitted by Shenzhen CCUT Quality Technology Co., Ltd. Report No: SSP26010739-1E FCC Test Report Page 2 of 51 Test Report Basic Information Applicant..................................: Yiwu Chanli E-Commerce Firm Address of Applicant...............: Room 201, Unit 3, Building 19, Qiaodong 3rd Zone, Jiangdong Street, Yiwu City, Jinhua, Zhejiang Province, China Manufacturer..........................: Harhoers Address of Manufacturer........: No. 19, 3rd Unit, East Bridge Area, Jiangdong Street, Jiujiang City, Zhejiang Province Product Name.........................: Baby Swing Brand Name.............................: - Main Model..............................: Harhoers Electric baby swing for Babies Series Models..........................: - Test Standard..........................: FCC Part 15 Subpart C ANSI C63.4-2014 ANSI C63.10-2020 Date of Test .............................: 2026-01-22 to 2026-01-28 Test Result...............................: PASS Tested By ................................: (Walker Wu) Reviewed By............................: (Lorzix Luo) Authorized Signatory............: (Lahm Peng) Note : This test report is limited to the above client company and the product model only. It may not be duplicated without prior permitted by Shenzhen CCUT Quality Technology Co., Ltd.. All test data presented in this test report is only applicable to presented test sample. Report No: SSP26010739-1E FCC Test Report Page 3 of 51 CONTENTS 1. General Information ....................................................................................................................................................5 1.1 Product Information .............................................................................................................................................5 1.2 Test Setup Information..........................................................................................................................................6 1.3 Compliance Standards ...........................................................................................................................................7 1.4 Test Facilities ........................................................................................................................................................7 1.5 List of Measurement Instruments ..........................................................................................................................8 1.6 Measurement Uncertainty .....................................................................................................................................9 2. Summary of Test Results ........................................................................................................................................... 10 3. Antenna Requirement ............................................................................................................................................... 11 3.1 Standard and Limit.............................................................................................................................................. 11 3.2 Test Result .......................................................................................................................................................... 11 4. Conducted Emissions ................................................................................................................................................ 12 4.1 Standard and Limit.............................................................................................................................................. 12 4.2 Test Procedure.................................................................................................................................................... 12 4.3 Test Data and Results .......................................................................................................................................... 13 5. Radiated Emissions ................................................................................................................................................... 16 5.1 Standard and Limit.............................................................................................................................................. 16 5.2 Test Procedure.................................................................................................................................................... 16 5.3 Test Data and Results .......................................................................................................................................... 18 6. Band-edge Emissions(Radiated) ............................................................................................................................... 22 6.1 Standard and Limit.............................................................................................................................................. 22 6.2 Test Procedure.................................................................................................................................................... 22 6.3 Test Data and Results .......................................................................................................................................... 22 7. Frequency Hopping System .…

Text truncated - open the document above for the full version.

Report No: SSP26010739-1E FCC ID: 2BUOU-HARHOERS Annex of Test Report Annex C. Test Photos Conducted Emission Test View 1 Radiated Emission Test View Below 1GHz Report No: SSP26010739-1E FCC ID: 2BUOU-HARHOERS Annex of Test Report Radiated Emission Test View Above 1GHz