2BUPZ-X9FGY06

1 2 6MM 2 1 33 33 1. Hang the positioning plate on the rear lockhousing and align it with the lock bolt; 2. Align the center hole of the rear main lockbody with the lock core iron plate, then alignwith the positioning plate, find the strike boxand fix it securely; 1 Facial Recognition Camera Touch Keypad Fingerprint Sensor USB Emergency Power Port Press the Doorbell Buttonand slide down to view the mechanical key lock Power interface / Power connector Indoor charging port Removable battery charging port Factory reset button graffiti mainboard connector Front panel cable connector (graffiti) REAR LOCK INSTALLATION Door lock installation diagram MAIN LOCK BODY SCREWS LOCK COVER TURN KNOB ★ The positioning piece has a distance of 6 mm; too large or too small a spacing during installation will affect usage. 3. Align the rear lock with the strike box on thedoor frame and fix the screws at the fourcorners; 4. Put on the rear cover, fix the rear coverscrews, and the installation is complete. Front Lock Core Installation 2.Tighten the screw tosecure the lock core. About 1CM Slot Position Cutting Line Door Thickness Front Lock Fixing Diagram 1.Rotate to the position indicated to the lockcore slot. Front and Rear Lock Installation Diagram Screw Sleeve Screw Sleeve LongScrews Fingerprint Lock Outside Inside Tuya App Registration and Login # Standby Quiescent Current Standard Version <= 200uA (excluding lock panel/ modules); Video Version <=300uA Emergency Inter face Type-C interface Fingerprint Front and Rear Panel Connector 1/2 Add Device Camera /Lock Door Lock (Wi-Fi) 2.4G Network Enter Network Password Blink Quickly (0.5 sec /time) Wi-Fi Connecting Searching forDevice Connection Successful Currently, there are unlocking methodsnot associated with any member. Go toassociate > Note: After registering in standalonemode on the lock end, it can no longerconnect to the APP mode. You must restore factory settings before it can be connected again. POSITIONING PLATE Apartment Lock No.6 Manual Wiring Diagram Pairing Method for Dual Front and Rear Fingerprint /Code Models Connect both front and rear panels to the rear board simultaneously, then press and hold the Reset Button until binding is complete. FCC WARNING Changes or modifications not expressly approved by the party responsible for compliance could void the user' This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference; (2) This device must accept any interference received,including interference that may cause undesired operation. s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device,pursuant to part 15 of the FCC Rules.These limits are designed to provide reasonable protection against harmful interference in a residential installation.This equipment generates,uses and can radiate radio frequency energy and,if not installed and used in accordance with the instructions,may cause harmful interference to radio communications. However,there is no guarantee that interference will not occur in a particlar installation.If this equipment does cause harmful interference to radio or television reception ,which can be determined by turning the equipment off and on,the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

Rev1/26/2023 YiwuHengdaliTechnologyCo.,Ltd. FederalCommunicationsCommission AuthorizationandEvaluationDivision 7435OaklandMillsRoad Columbia,MD21046 USA Date:8-20-2026 Ref:AttestationStatementsPart2.911(d)(5)(i)Filing FCCID:2BUPZ-X9F YiwuHengdaliTechnologyCo.,Ltd.certifiesthattheequipmentforwhichauthorizationissoughtisnot “covered”equipmentprohibitedfromreceivinganequipmentauthorizationpursuanttosection2.903of theFCCrules. YiwuHengdaliTechnologyCo.,Ltd.certifiesthattheequipmentforwhichauthorizationissoughtdoes notincludecybersecurityoranti-virussoftwareproducedorprovidedbyKasperskyLab,Inc.oranyofits successorsandassignees,includingequipmentwithintegratedKasperskyLab,Inc.(oranyofits successorsandassignees)cybersecurityoranti-virussoftwarepursuanttoDA-24-886andKDB986446 D01CoveredEquipmentGuidancesectionB(2a). Deviceisinherentlycompliantbasedonhardwarelimitationsorsoftwarecontrols. or ASoftwareBillofMaterials(SBOM)isprovidedtotheTCBforreview,and Theend-userorthirdpartiescannotinstalladditionalsoftwareonthisdevice. Sincerely, (Applicantsignature) (Applicantprintedname):LuffyFang Rev1/26/2023 YiwuHengdaliTechnologyCo.,Ltd. FederalCommunicationsCommission AuthorizationandEvaluationDivision 7435OaklandMillsRoad Columbia,MD21046 USA Date:8-20-2026 Ref:AttestationStatementsPart2.911(d)(5)(ii)Filing FCCID:2BUPZ-X9F YiwuHengdaliTechnologyCo.,Ltd.certifiesthat,asofthedateofthefilingoftheapplication,the applicantisnotidentifiedontheCoveredList(asaspecificallynamedentityoranyofitssubsidiariesor affiliates)asanentityproducing“covered”equipment. Sincerely, (Applicantsignature) (Applicantprintedname): LuffyFang

YiwuHengdaliTechnologyCo.,Ltd. Date：8-20-2026 ProductModelNumber:X9F,X9S,X9V,X9H,X9K,X9L,X9Z,X9C,X6S,X6F,X5F,X5 S,X7S,X7F,X8F,X8S,X9T,X9U,X9M FCCID:2BUPZ-X9F Towhomitmayconcern, Re:ProductCertificationRepresentativeAuthorizationLetter WeauthorizeQAILaboratoriesLtd.3980NorthFraserWay,BurnabyB.C. CanadaV5J5K5toactonourbehalfonallmattersconcerningtheabove namedequipment. Thisshallincludethefollowing: Testing Approvalapplicationsandprocedures WedeclarethatQAILaboratoriesLtd.isallowedtoforwardallinformation relatedtotheapprovalprojecttotheappliedcertificationbodyandtothe notificationentitiesandtodiscussanyissuesconcerningtheapproval application.AnyandallactscarriedoutbyQAILaboratoriesLtd.onour behalfshallhavethesameeffectasactsofourown. By:LuffyFang ContactListedonFCCWesbite Title:Manager Email:[email protected] Telephone:13957934110 Onbehalfof:YiwuHengdaliTechnologyCo.,Ltd.

YiwuHengdaliTechnologyCo.,Ltd. OfficeofEngineeringTechnology FederalCommunicationsCommission 7435OaklandMillsRoad Columbia,MD21046 USA Date:August25,2026 Subject;RequestforConfidentiality FCCID:2BUPZ-X9F ToWhomItMayConcern, PursuanttotheprovisionsoftheCommission’srulesTitle47Sections§0.457and§0.459,we arerequestingtheCommissiontowithholdthefollowingattachment(s)asconfidential documentsfrompublicdisclosureindefinitely. Thesedocumentscontaindetailedsystemandequipmentdescriptionsandareconsideredas proprietaryinformationinoperationoftheequipment.Thepublicdisclosureofthese documentsmightbeharmfultoourcompanyandwouldgivecompetitorsanunfairadvantage inthemarket. SchematicDiagram BlockDiagram PartsList OperationalDescription Tune-upProcedure SoftwareSecurityRequirementsforUNIIdevices Inadditionaltoabovementioneddocuments,inordertocomplywiththemarketingregulations inTitle47CFR§2.803andtheimportationrulesinTitle47CFR§2.1204,whileensuringthat businesssensitiveinformationremainsconfidentialuntiltheactualmarketingofnewly authorizeddevices,werequestShortTermConfidentialityofthefollowingattachment(s); ExternalPhotos TestSetupPhotos InternalPhotos UserManual For45days,pursuanttoPublicNoticeDA04-1705. OR For180dayspursuanttoKDB726920D01. Itisourunderstandingthatallmeasurementtestreports,FCCIDlabelformatand correspondenceduringthecertificationreviewprocesscannotbegrantedasconfidential documentsandthisinformationwillbeavailableforpublicreviewoncethegrantofequipment authorizationisissued. Sincerely, Signature: Name:LuffyFang Title: Manager

YiwuHengdaliTechnologyCo.,Ltd. ProductSimilarityDeclaration EUTDescription:GY06 ModelNo.:X9F,X9S,X9V,X9H,X9K,X9L,X9Z,X9C,X6S,X6F,X5F,X 5S,X7S,X7F,X8F,X8S,X9T,X9U,X9M FCCID:2BUPZ-X9F We(YiwuHengdaliTechnologyCo.,Ltd.)herebystatethatallthe modelsareelectricalidenticalincludingthesamesoftware parameterandhardwaredesign(i.e.,circuitdesign,PCBLayout, RFmodule/circuit,antennatype(s)andantennalocation, componentsonPCB,etc.,),samemechanicalstructureand design(includingproductenclosure,materials,etc.,),theonly differenceisthemodelnameandcolor. Signature: Name:LuffyFang Title:Manager Place,date:Aug.25,2026

Page1of4FCS202607334 Externalphotos Photo1 Photo2 Page2of4FCS202607334 Photo3 Photo4 Page3of4FCS202607334 Photo5 Photo6 Page4of4FCS202607334 Photo7 Photo8

LabelandLabelLocation FCCID:2BUPZ-X9F ContainFCCID:2ANDL-WBR3 Thisdevicecomplieswithpart15oftheFCCRules. Operationissubjecttothefollowingtwoconditions: (1)Thisdevicemaynotcauseharmfulinterference; (2)Thisdevicemustacceptanyinterferencereceived,including interferencethatmaycauseundesiredoperation. L*W:6cm*1cm labelandwhitefont

Page1of7FCS202607334 Internalphotos Photo1 Photo2 Page2of7FCS202607334 Photo3 Photo4 Page3of7FCS202607334 Photo5 Photo6 Page4of7FCS202607334 Photo7 Photo8 Page5of7FCS202607334 Photo9 Photo10 Page6of7FCS202607334 Photo11 Photo12 ANT Page7of7FCS202607334 Photo13

Page1of2ReportNo.:FCS202607334 FCCRFExposure EUTDescription:GY06 ModelNo.:X9F,X9S,X9V,X9H,X9K,X9L,X9Z,X9C,X6S,X6F,X5F,X5S,X7S,X7F,X8F,X8S,X9T,X9U,X9M FCCID:2BUPZ-X9F Equipmenttype:mobileequipment RFExposureEvaluation Limits Thecriterialistedinthefollowingtableshallbeusedtoevaluatetheenvironmentimpactofhuman exposuretoradiofrequency(RF)radiationasspecifiedin1.1307(b) LimitsforMaximumPermissibleExposure(MPE) Frequencyrange (MHz) Electricfield strength (V/m) Magneticfieldstrength (A/m) Powerdensity (mW/cm 2 ) Averagingtime (minutes) (A)LimitsforOccupational/ControlledExposures 0.3–3.06141.63*(100)6 3.0–30 1842/f4.89/f *(900/f 2 ) 6 30–30061.40.1631.06 300–1500f/3006 1500–100,000 5 6 (B)LimitsforGeneralPopulation/UncontrolledExposure 0.3–1.346141.63*(100)30 1.34–30 824/f2.19/f *(180/f 2 ) 30 30–30027.50.0730.230 300–1500f/150030 1500–100,0001.030 f=frequencyinMHz Friistransmissionformula:Pd=(Pout*G)/(4*pi*r 2 ) Where Pd=powerdensityinmW/cm 2 ,Pout=outputpowertoantennain mW;G=gainofantennainlinearscale,Pi=3.1416; R=distancebetweenobservationpointandcenteroftheradiatorincm PdidthelimitofMPE,1mW/cm 2 .Ifweknowthemaximumgainoftheantennaandthetotalpower inputtotheantenna,throughthecalculation,wewillknowthedistancerwheretheMPElimitis reached. TestProcedure SoftwareprovidedbyclientenabledtheEUTtotransmitandreceivedataatlowest,middleandhighest channelindividually. Page2of2ReportNo.:FCS202607334 FluxComplianceServiceLaboratory Room105FloorBaohaoTechnologyBuilding1NO.15GongyeWestRoadHi-TechIndustrial,SongshanlakeDongguan Tel:769-27280901Fax:769-27280901http://www.FCS-lab.com TestResultofRFExposureEvaluation LimitsforMaximumPermissibleExposure(MPE) 2.4GWIFI TestModel Conductedpower (dBm) Max tune-up(mW) Antenna Gain (dBi) Min.distance (cm) ResultLimit 802.11b13.1020.41742.54200.0072901 802.11g12.7718.92342.54200.0067571 802.11n2013.0220.04472.54200.0071571 BLE Maximumpeakoutputpoweratantennainputterminal(dBm):7.80 Maximumpeakoutputpoweratantennainputterminal(mW):6.03 tune-upconductedpower(dBm):9.0 tune-upconductedpower(mW):7.94 Predictiondistance(cm):20 AntennaGain,typical(dBi):2.5 MaximumAntennaGain(numeric):1.78 Theworstcaseispowerdensityatpredicationfrequencyat20cm(mW/cm 2 ):0.0028 MPElimitforgeneralpopulationexposureatpredictionfrequency(mW/cm 2 ):1 S(total)=S(WIFI)+S(BLE)=0.007290+0.0028=0.01009mW/cm 2 Conclusion:0.01009 ≤1.0compliancewithFCC'sRFExposure.

FCCTestReport ReportNo:FCS202607334W01 Issuedfor Applicant:YiwuHengdaliTechnologyCo.,Ltd. Address: Room402,No.108,ThirdStreet,ChengxinSecondDistrict, FutianSubdistrict,YiwuCity,JinhuaCity,ZhejiangProvince ProductName:GY06 BrandName:HANDAILY ModelName:X9F SeriesModel: X9S,X9V,X9H,X9K,X9L,X9Z,X9C,X6S,X6F,X5F,X5S,X7S,X 7F,X8F,X8S,X9T,X9U,X9M FCCID:2BUPZ-X9F IssuedBy:FluxComplianceServiceLaboratory Add:Room105FloorBaohaoTechnologyBuilding1NO.15GongyeWestRoadHi-Tech Industrial,SongshanlakeDongguan Tel:769-27280901Fax:769-27280901http://www.FCS-lab.com FluxComplianceServiceLaboratory Room105FloorBaohaoTechnologyBuilding1NO.15GongyeWestRoadHi-TechIndustrial,SongshanlakeDongguan Tel:769-27280901Fax:769-27280901http://www.FCS-lab.com Page2of57ReportNo.:FCS202607334W01 TESTRESULTCERTIFICATION Applicant’sName ...................... : YiwuHengdaliTechnologyCo.,Ltd. Address......................................: Room402,No.108,ThirdStreet,ChengxinSecondDistrict, FutianSubdistrict,YiwuCity,JinhuaCity,ZhejiangProvince Manufacture'sName ................ : FoshanXindaTengfeiIntelligentTechnologyCo.,Ltd. Address ...................................... : No.8,SouthHebeiSeventhRoad,QimengCommunityResi dents’Committee,XintanTown,ShundeDistrict,FoshanCity, GuangdongProvince,China. ProductDescription ProductName ........................... : GY06 BrandName.............................:HANDAILY ModelName..............................: X9F SeriesModel..............................:Seethefirstpageofthereport TestStandards .......................... :FCCRulesandRegulationsPart15SubpartC,Section247 TestProcedure .......................... : ANSIC63.10-2020+Cor.1-2023+C63.10a-2024+Erratato C63.10a-2024 ThisdevicedescribedabovehasbeentestedbyFluxComplianceServiceLaboratory,thetestresults showthattheequipmentundertest(EUT)isincompliancewiththeFCCrequirements.Anditisapplicable onlytothetestedsampleidentifiedinthereport. Thisreportshallnotbereproducedexceptinfull,withoutthewrittenapprovalofFluxComplianceService Laboratory,thisdocumentmaybealteredorrevisedbyFluxComplianceServiceLaboratory,personal only,andshallbenotedintherevisionofthedocument.. DateofTest .................................. : Date(s)ofperformanceoftests.:July22,2026~Aug.05,2026 DateofIssue ................................. : Aug.05,2026 TestResult ..................................... :Pass Testedby: (orangeOuYang) Reviewedby : (Jayden) Approvedby: (JackWang) FluxComplianceServiceLaboratory Room105FloorBaohaoTechnologyBuilding1NO.15GongyeWestRoadHi-TechIndustrial,SongshanlakeDongguan Tel:769-27280901Fax:769-27280901http://www.FCS-lab.com Page3of57ReportNo.:FCS202607334W01 TableofContentsPage 1.SUMMARYOFTESTRESULTS..............................................................................................6 1.1TESTFACTORY................................................................................................................7 1.2MEASUREMENTUNCERTAINTY.....................................................................................7 2.GENERALINFORMATION.......................................................................................................8 2.1GENERALDESCRIPTIONOFTHEEUT..........................................................................8 2.2BLOCKDIGRAMSHOWINGTHECONFIGURATIONOFSYSTEMTESTED.............10 2.3DESCRIPTIONOFNECESSARYACCESSORIESANDSUPPORTUNITS.................11 2.4EQUIPMENTSLIST.........................................................................................................12 3.6DBBANDWIDTH..................................................................................................................13 3.1Limit..................................................................................................................................13 3.2TestProcedure.................................................................................................................13 3.3Testsetup.........................................................................................................................13 3.4Testresults.......................................................................................................................14 4.CONDUCTEDOUTPUTPOWER...........................................................................................20 4.1limit...................................................................................................................................20 4.2testprocedure..................................................................................................................20 4.3TESTSETUP...................................................................................................................20 4.5testresults........................................................................................................................20 5.POWERSPECTRALDENSITY..............................................................................................21 5.1LIMIT................................................................................................................................21 5.2TESTPROCEDURE........................................................................................................21 5.3TESTSETUP...................................................................................................................21 5.4TESTRESULTS...............................................................................................................22 5.5originaltestdata...............................................................................................................23 6.Bandedgeandspurious(conducted).................................................................................28 6.1LIMIT................................................................................................................................28 6.2TESTPROCEDURE....................................................................................................…

Text truncated - open the document above for the full version.

AntennaSpecification Manufacture：TUYA ProductName：WBR3Antenna AntennaType：PCB TestDate：2021.05.20 Testedby：LongWang Approvedby：Licco Content 1.GeneralDescription.................................................................................1 2.TestConfigurations...................................................................................2 2.1TestEnvironment............................................................................2 2.2TestEquipment...............................................................................2 2.3TestPrinciple...................................................................................2 3.TestResults..............................................................................................3 3.1GainandEfficiency..........................................................................3 3.2RadiationPattern............................................................................4 4.AntennaDimensions................................................................................6 5.EUTPhoto................................................................................................6 6.TestSetupPhoto......................................................................................7 1 1.GeneralDescription ManufacturerHangzhouTuyaInformationTechnologyCo.,Ltd Address Room701,Building3,MoreCenter,No.87GuDunRoad, Hangzhou,Zhejiang,China TestLocation Room106,Building3,LetongSciencePark,No.500, QiuyiRoad,BinjiangDistrict,Hangzhou ProductNameWBR3Antenna Productmodel WBR3 AntennaType PCBAntenna TestItems Gain;Efficiency;RadiationPattern TestFrequency 2400-2500MHz TestStandard ANSI/IEEEStd149-1979 2 2.TestConfigurations 2.1TestEnvironment Temperature(°C)25 Humidity(%RH)60 AtmosphericPressure(kPa)100.5 2.2TestEquipment TestSystemTEM24Multi-probeMicrowaveChamber TestInstrumentAgilentE5071B 2.3TestPrinciple 3 3.TestResults 3.1GainandEfficiency Frequency(MHz)PeakGain(dBi)Efficiency(%) 2400 1.6252.29 2410 1.7152.17 2420 1.9353.14 2430 1.9854.16 2440 2.0057.62 2450 2.1759.64 2460 2.4561.55 2470 2.3860.64 2480 2.5462.86 2490 2.3059.85 2500 2.4960.41 4 3.2RadiationPattern Phi02D Phi902D 5 Theta902D 2480MHz3D 6 4.AntennaDimensions 5.EUTPhoto 7 6.TestSetupPhoto

Page1of2 ReportNo.:FCS202607334 RE（Below1GHz） RE（Above1GHz） Page2of2 ReportNo.:FCS202607334 CE