2BUQR-SPINAIR-WEV AC Charger

Annexure A Page 1 of 5 Similarities and diƯerences Block features/Model No. Similarity DiƯerences Voltage and current connection SpinAirUL7K240-NT32-W Input/ Output Voltage- L1+L2+GND: 208/240V nominal 50/60Hz. Input/ Output Current 32A, 7.4kW Max, with (L1, L2) 8/6AWG, GND 10AWG SpinAirUL9K240-NT40-W Input/ Output Current 40A, 9.6kW Max (L1, L2) 6AWG, GND 10AWG SpinAirUL11K240-NT48-W Input/ Output Current 48A, 11.5 kW Max (L1, L2) 6AWG, GND 10AWG. Input Plug/ Output Connection SpinAirUL7K240-1T32N6-W NEMA plug 6-50P with Wi-Fi and BLE only With an AC type 1 Gun SpinAirUL7K240-NT32N6-W With the Tesla (NACS) output Gun SpinAirUL7K240-1T32N14-W NEMA plug 14-50P with Wi-Fi and BLE only With an AC type 1 Gun SpinAirUL7K240-NT32N14-W With the Tesla (NACS) output Gun SpinAirUL7K240-1T32-W L1-L2 (6AWG) wire fixed GND (8AWG) connection (conduit) with Wi-Fi and BLE only With an AC type 1 Gun SpinAirUL7K240-NT32-W With the Tesla (NACS) output Gun SpinAirUL9K240-1T40N6-W NEMA plug 6-50P with Wi-Fi and BLE only With an AC type 1 Gun SpinAirUL9K240-NT40N6-W With the Tesla (NACS) output Gun SpinAirUL9K240-1T40N14-W NEMA plug 14-50P with Wi-Fi and BLE only With an AC type 1 Gun SpinAirUL9K240-NT40N14-W With the Tesla (NACS) output Gun SpinAirUL9K240-1T40-W L1-L2 (6AWG) wire fixed GND (8AWG) connection (conduit) with Wi-Fi and BLE only With an AC type 1 Gun SpinAirUL9K240-NT40-W With the Tesla (NACS) output Gun SpinAirUL11K240-1T48-W L1-L2 (6AWG) wire fixed GND (8AWG) connection (conduit) with Wi-Fi and BLE only With an AC type 1 Gun SpinAirUL11K240-NT48-W With the Tesla (NACS) output Gun Signal CondiƟoning for voltage and current input/ output and power supply No diƯerences All hardware is the same except diƯerences. Measurement and microcontroller No diƯerences Common Software and hardware Peripheral (LED, Key, Memory) No diƯerences Common Software and hardware Annexure A Page 2 of 5 Power Card Top View: Power Card Bottom View Annexure A Page 3 of 5 Control Card Top View Control Card Bottom View Annexure A Page 4 of 5 NACS Charging Gun/ Connector View AC Type 1 Charging Gun/ Connector View Annexure A Page 5 of 5 Input NEMA plug 6-50P View. Input NEMA plug 14-50P View Fixed Wiring View.

Label and Location Requirements

TEST REPORT Report Reference. No.: 80260100026001 Page 1 of 6 Report Reference No. ....................... : 80260100026001 Sample ID ......................................... : BLC-01-0946117-002 Date of issue ..................................... : 16/04/2026 Total number of pages ...................... : 6 Testing Laboratory ............................ : TUV SUD South Asia Pvt Ltd Address............................................. : Plot No. 3-P1-B, Hitech Defence & Aerospace Park, KIADB Industrial Area, BK Palya, Bengaluru, Bengaluru North Taluk | Pin code – 562149 India Applicant’s name .............................. : Exicom Tele-Systems Limited Address............................................. : 3rd Floor, Plot No 38, Sector 32, Gurugram, Haryana 122001 India Client Representative................ ... .: Surya Kant Singh Test specification Standard............: RF Exposure Report FCC 47 CFR 1.1310 Test Method ...................................... : FCC KDB 447498 D01 Non-standard test method............. : NA Test Report Form Number.............: LAB_F(EE)_138-049 Product Name..............................: EV AC Charger Test Item Description.....................: Electric Vehicle Supply Equipment Manufacturer ...............................: Exicom Tele-Systems Limited Model Number..............................: SpinAirUL11K240-NT48-W Serial Number..............................: HE531296#D32210417040844 Ratings........................................: 208/240 VAC, 60 Hz FCC ID.......................................: 2BUQR-SPINAIR-W Prepared by (Name + Signature) ..........................: Nikhil G Reviewed & Approved by (Name + Signature) ..........................: Raghunath M N TEST REPORT Report Reference. No.: 80260100026001 Page 2 of 6 CONTENTS 1 TEST SUMMARY .................................................................................................................................................................... 3 2 EQUIPMENT INFORMATION .................................................................................................................................................. 4 2.1 PRODUCT FUNCTION ............................................................................................................................................................. 4 2.2 GENERAL INFORMATION OF EUT ............................................................................................................................................. 4 3 RF EXPOSURE EVALUATION METHOD ................................................................................................................................... 5 3.1 SCOPE ................................................................................................................................................................................ 5 3.2 RF EXPOSURE LIMITS ............................................................................................................................................................. 5 3.3 RF EXPOSURE EVALUATION METHOD ....................................................................................................................................... 5 4 RESULTS SUMMARY .............................................................................................................................................................. 6 5 CONCLUSION ......................................................................................................................................................................... 6 TEST REPORT Report Reference. No.: 80260100026001 Page 3 of 6 1 TEST SUMMARY Sl.no Protocol, Band (MHz) Basic Standard Result FCC 1. BLE (2402MHz – 2483.5MHz) FCC 47 CFR 1.1310 FCC KDB 447498 D01 PASS 2. Wi-Fi 2.4GHz (2412MHz – 2462MHz) FCC 47 CFR 1.1310, FCC KDB 447498 D01 PASS TEST REPORT Report Reference. No.: 80260100026001 Page 4 of 6 2 EQUIPMENT INFORMATION 2.1 Product Function The SPIN Air, as well as its various models and configurations. It provides essential guidance for the following activities: Installation of the charger Operation of the charger Performing fundamental maintenance procedures 2.2 General Information of EUT Table 1: EUT details as declared by client* EUT Name EV AC Charger Model SpinAirUL11K240-1T48-W Serial Number HE531296#D32210417040844 Protocol Bluetooth Low Energy Wi-Fi 2.4GHz Operating Frequency Range 2402MHz-2480MHz 2412MHz to 2462MHz Channel Spacing 2MHz 5MHz No. of Channels 40 11 Environmental conditions Storage -58°F to +158°F (-30°C to +50°C) Operating -22°F to +122°F (-30°C to +50°C) Supply Voltage 208/240 VAC with 60 Hz Maximum Measured Power (dBm) 6.58dBm 2440 (MHz)@2Mbps 21.68dBm 2412 (MHz) @g Mode_6Mbps Modulation GFSK 802.11b: DSSS, 802.11g/n: OFDM, 802.11ax: OFDMA Number of antennas 1 1 Antenna Type PCB Chip Antenna PCB Chip Antenna Antenna Gain -1.8 dBi -1.8 dBi EUT Dimension (LxWxH) 246mm x 246mm x 133mm *Disclaimer: The TÜV SÜD is not responsible for the accuracy of the customer declared specification. TEST REPORT Report Reference. No.: 80260100026001 Page 5 of 6 3 RF EXPOSURE EVALUATION METHOD 3.1 Scope This section documents the RF exposure evaluation of the Equipment Under Test (EUT) to demonstrate compliance with the applicable Maximum Permissible Exposure (MPE) requirements of FCC 47 CFR §1.1310, FCC 47 CFR §2.1091. The EUT is intended for operation with a minimum separation distance greater than 20 cm between the antenna and the human body. Therefore, RF exposure compliance is evaluated using power density–based MPE limits, and Specific Absorption Rate (SAR) evaluation is not required. 3.2 RF Exposure Limits 3.2.1 FCC RF Exposure Limits According to FCC 47 CFR §1.1310, the Maximum Permissible Exposure limits for RF electromagnetic fields are defined as follows. Table 1: FCC Limits for Maximum Permissible Exposure (MPE) Frequency Range (MHz) Exposure Environment Power Density Limit (mW/cm²) 300 – 1500 General Population / Unc…

Text truncated - open the document above for the full version.

Antenna FC41D Datasheet Antenna Services Version: 1.0 Date: 2022-05-26 Status: Preliminary Antenna Services XXXXXXXX Datasheet Antenna_Datasheet 1 / 14 At Quectel, our aim is to provide timely and comprehensive services to our customers. If you require any assistance, please contact our headquarters: Quectel Wireless Solutions Co., Ltd. Building 5, Shanghai Business Park Phase III (Area B), No.1016 Tianlin Road, Minhang District, Shanghai 200233, China Tel: +86 21 5108 6236 Email: [email protected] Or our local offices. For more information, please visit: http://www.quectel.com/support/sales.htm. For technical support, or to report documentation errors, please visit: http://www.quectel.com/support/technical.htm. Or email us at: [email protected]. Legal Notices We offer information as a service to you. The provided information is based on your requirements and we make every effort to ensure its quality. You agree that you are responsible for using independent analysis and evaluation in designing intended products, and we provide reference designs for illustrative purposes only. Before using any hardware, software or service guided by this document, please read this notice carefully. Even though we employ commercially reasonable efforts to provide the best possible experience, you hereby acknowledge and agree that this document and related services hereunder are provided to you on an “as available” basis. We may revise or restate this document from time to time at our sole discretion without any prior notice to you. Use and Disclosure Restrictions License Agreements Documents and information provided by us shall be kept confidential, unless specific permission is granted. They shall not be accessed or used for any purpose except as expressly provided herein. Copyright Our and third-party products hereunder may contain copyrighted material. Such copyrighted material shall not be copied, reproduced, distributed, merged, published, translated, or modified without prior written consent. We and the third party have exclusive rights over copyrighted material. No license shall be granted or conveyed under any patents, copyrights, trademarks, or service mark rights. To avoid ambiguities, purchasing in any form cannot be deemed as granting a license other than the normal non-exclusive, royalty-free license to use the material. We reserve the right to take legal action for noncompliance with abovementioned requirements, unauthorized use, or other illegal or malicious use of the material. Antenna Services XXXXXXXX Datasheet Antenna_Datasheet 2 / 14 Trademarks Except as otherwise set forth herein, nothing in this document shall be construed as conferring any rights to use any trademark, trade name or name, abbreviation, or counterfeit product thereof owned by Quectel or any third party in advertising, publicity, or other aspects. Third-Party Rights This document may refer to hardware, software and/or documentation owned by one or more third parties (“third-party materials”). Use of such third-party materials shall be governed by all restrictions and obligations applicable thereto. We make no warranty or representation, either express or implied, regarding the third-party materials, including but not limited to any implied or statutory, warranties of merchantability or fitness for a particular purpose, quiet enjoyment, system integration, information accuracy, and non-infringement of any third-party intellectual property rights with regard to the licensed technology or use thereof. Nothing herein constitutes a representation or warranty by us to either develop, enhance, modify, distribute, market, sell, offer for sale, or otherwise maintain production of any our products or any other hardware, software, device, tool, information, or product. We moreover disclaim any and all warranties arising from the course of dealing or usage of trade. Privacy Policy To implement module functionality, certain device data are uploaded to Quectel’s or third-party’s servers, including carriers, chipset suppliers or customer-designated servers. Quectel, strictly abiding by the relevant laws and regulations, shall retain, use, disclose or otherwise process relevant data for the purpose of performing the service only or as permitted by applicable laws. Before data interaction with third parties, please be informed of their privacy and data security policy. Disclaimer a) We acknowledge no liability for any injury or damage arising from the reliance upon the information. b) We shall bear no liability resulting from any inaccuracies or omissions, or from the use of the information contained herein. c) While we have made every effort to ensure that the functions and features under development are free from errors, it is possible that they could contain errors, inaccuracies, and omissions. Unless otherwise provided by valid agreement, we make no warranties of any kind, either implied or express, and exclude all liability for any loss or damage suffered in connection with the use of features and functions under development, to the maximum extent permitted by law, regardless of whether such loss or damage may have been foreseeable. d) We are not responsible for the accessibility, safety, accuracy, availability, legality, or completeness of information, advertising, commercial offers, products, services, and materials on third-party websites and third-party resources. Copyright © Quectel Wireless Solutions Co., Ltd. 2022. All rights reserved. Antenna Services XXXXXXXX Datasheet Antenna_Datasheet 3 / 14 About the Document Revision History Version Date Author Note - 2022-05-26 Boris.Wang Creation of the document 1.0 2022-05-26 Boris.Wang First official release Antenna Services XXXXXXXX Datasheet Antenna_Datasheet 4 / 14 Contents About the Document ................................................................................................................................... 3 Contents ............................................…

Text truncated - open the document above for the full version.

TEST REPORT Page 1 of 74 Report Reference No. ...................... : 80260100025001 Sample ID ......................................... : BLC-01-0946117-002 Date of issue .................................... : 16/04/2026 Total number of pages ..................... : 74 Testing Laboratory ........................... : TUV SUD South Asia Pvt Ltd Address ............................................ : Plot No. 3-P1-B, Hitech Defence & Aerospace Park, KIADB Industrial Area, BK Palya, Bengaluru, Bengaluru North Taluk | Pin code – 562149 India Applicant’s name .............................. : Exicom Tele-Systems Limited Address ............................................ : 3rd Floor, Plot No 38, Sector 32, Gurugram, Haryana 122001 India Client Representative....................: Surya Kant Singh Test specification Standard............: FCC Part 15 Subpart C 15.203, 15.205, 15.207, 15.209 & 15.247 Test Method ..................................... : ANSI C63.10-2020 Non-standard test method............. : NA Test Report Form Number.............: LAB_F(EE)_138-51 Product Name..............................: EV AC Charger Test Item Description.....................: Electric Vehicle Supply Equipment Manufacturer ...............................: Exicom Tele-Systems Limited Model Number..............................: SpinAirUL11K240-NT48-W Serial Number..............................: HE531296#D32210417040844 Ratings........................................: 208/240 VAC, 50/60 Hz FCC ID.......................................: 2BUQR-SPINAIR-W Tested by (Name + Signature) ..........................: Nikhil G Reviewed & Approved by (Name + Signature) ..........................: Raghunath M N TEST REPORT Report Reference. No.: 80260100025001 Page 2 of 74 Possible test case verdicts: - test case does not apply to the test object .... : N/A - test object does meet the requirement ......... : Pass - test object does not meet the requirement ... : Fail Testing: Condition of the EUT on Receipt.....................: Good Date of receipt of test item ............................... : 06/10/2025 Date (s) of performance of tests ...................... : 17/11/2025 to 09/02/2026 General remarks: 1. The submitted sample(s) were not drawn by laboratory. 2. The test results presented in this report relate only to the object tested. 3. The results contained in this report reflect the results for this particular model and serial number. It is the responsibility of the manufacturer to ensure that all production models meet the intent of the requirements detailed within this report. 4. The correctness of the information related to sample(s) in the Test Request Form/Customer letterhead/E-mail is the customer’s responsibility. The laboratory reports the said information in the test report and is not liable for the same. 5. The laboratory will retain the sample(s) for 45 days except for the mandatory retention period specified by the Regulatory Bodies and unless otherwise specified by the client. 6. This report shall not be reproduced, except in full, without the written approval of the Issuing testing laboratory. “(see Enclosure #)” refers to additional information appended to the report. “(see appended table)” refers to a table appended to the report. 7. Throughout this report a point is used as the decimal separator. Use of uncertainty of measurement for decisions on conformity (decision rule): Yes/No No decision rule is specified by the IEC/EN standard, when comparing the measurement result with the applicable limit according to the specification in that standard. The decisions on conformity are made without applying the measurement uncertainty (“simple acceptance” decision rule, previously known as “accuracy method”). Other: (to be specified) Decisions on conformity: Decision on conformity of results is based on as per standard limits or criteria. Summary of compliance: The Product comply with the requirements of FCC Part 15 Subpart C 15.203, 15.205, 15.207, 15.209 & 15.247 TEST REPORT Report Reference. No.: 80260100025001 Page 3 of 74 Revision History of Records Test Report Number Version Reason for Change Date Issued 80260100025001 01 Initial Report 16/04/2026 TEST REPORT Report Reference. No.: 80260100025001 Page 4 of 74 Contents 1 TEST LABORATORY ................................................................................................................................................................ 5 1.1 TEST FACILITY ....................................................................................................................................................................... 5 2 GENERAL INFORMATION ....................................................................................................................................................... 5 2.1 APPENDICES ......................................................................................................................................................................... 5 3 TEST SUMMARY .................................................................................................................................................................... 6 4 MEASUREMENT UNCERTAINTY ............................................................................................................................................. 7 5 TEST EQUIPMENT USED ......................................................................................................................................................... 7 6 EQUIPMENT INFORMATION .................................................................................................................................................. 8 6.1 PRODUCT FUNCTION ............................................................................................................................................................. 8 6.2 PRODUCT MODEL SIMILARITIES/DIFFERENTIATING CHARACTERISTICS..........................................…

Text truncated - open the document above for the full version.