2BUSF-MI87635340-01BLUARMOR C60 & BLUARMOR C40

AptEner Mechatronics Private Limited, No. R32, V N Arcade, 1 st Floor, KSSIDC Industrial Estate,1 st Cross, Bommasandra Industrial Area 2 nd Phase Jigani Link Road, Yarandahalli Circle, Bangalore - 560099 CIN : U74999KA2017PTC099282 https://thebluarmor.com. Tel: +91 6360607079 Certification Designating a US Agent for Service of Process To: Federal Communications Commission Date: 03-26-2026 7435 Oakland Mills Road, Columbia, MD 21046, USA Ref: Attestation Statement – Part 2.911(d)(7) filing FCC ID: 2BUSF-MI87635340-01 APTENER MECHATRONICS PRIVATE LIMITED (“the applicant”) certifies that as of the date of the filing of the application, APTENER MECHATRONICS LLC (“the agent”) is our designated U.S. agent. We acknowledge the applicant’s consent and the designated agent for service of process’s obligation to accept service of process. The applicant accepts to maintain an agent for service of process for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. The applicant further acknowledges it is our responsibility to inform the FCC whenever the agent information changes. APPLICANT Company Name: APTENER MECHATRONICS PRIVATE LIMITED Contact Person: JUHAIM I A J Address: No: R32, V N Arcade, I Floor, KSSIDC Industrial Estate, I Cross, Bommasandra Industrial Area, II Phase, Jigani Link Road, Yarandahally, Circle, Bangalore, Karnataka, India, 560099 Tel.: +91 97469 70965 Email: [email protected] FCC FRN: 0037455805 U.S. Agent Company Name: APTENER MECHATRONICS LLC Contact Person: JUHAIM I A J Address: Aptener Mechatronis LLC 30 N Gould St Ste R Sheridan, WY 82801 EIN : 301-1468998 Tel.: +91 97469 70965 Email: [email protected] FCC FRN: 0037455805 AptEner Mechatronics Private Limited, No. R32, V N Arcade, 1 st Floor, KSSIDC Industrial Estate,1 st Cross, Bommasandra Industrial Area 2 nd Phase Jigani Link Road, Yarandahalli Circle, Bangalore - 560099 CIN : U74999KA2017PTC099282 https://thebluarmor.com. Tel: +91 6360607079 Sincerely yours, The Applicant The Agent Company Name APTENER MECHATRONICS PRIVATE LIMITED APTENER MECHATRONICS LLC Contact Person JUHAIM I A J JUHAIM I A J Signature

AptEner Mechatronics Private Limited, No. R32, V N Arcade, 1 st Floor, KSSIDC Industrial Estate,1 st Cross, Bommasandra Industrial Area 2 nd Phase Jigani Link Road, Yarandahalli Circle, Bangalore - 560099 CIN : U74999KA2017PTC099282 https://thebluarmor.com. Tel: +91 6360607079 Attestation Statements Not Covered Entity Applicant To: Federal Communications Commission Date: 03-26-2026 7435 Oakland Mills Road, Columbia, MD 21046, USA Ref: Information Required by Section 2.911(d)(5)(ii) filing FCC ID: 2BUSF-MI87635340-01 APTENER MECHATRONICS PRIVATE LIMITED (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing “covered” equipment. Sincerely yours, JUHAIM I A J Applicant Signature Printed Name: JUHAIM I A J Title: HEAD OF OEM BUSINESS & OPERATIONS Address: Aptener Mechatronis LLC, 30 N Gould St Ste R Sheridan, WY 82801 Tel.: +91 97469 70965 Email: [email protected]

AptEner Mechatronics Private Limited, No. R32, V N Arcade, 1 st Floor, KSSIDC Industrial Estate,1 st Cross, Bommasandra Industrial Area 2 nd Phase Jigani Link Road, Yarandahalli Circle, Bangalore - 560099 CIN : U74999KA2017PTC099282 https://thebluarmor.com. Tel: +91 6360607079 Attestation Statements Not Covered Equipment To: Federal Communications Commission Date: 03-26-2026 7435 Oakland Mills Road, Columbia, MD 21046, USA Ref: Information Required by Section 2.911(d)(5)(i) filing FCC ID: 2BUSF-MI87635340-01 APTENER MECHATRONICS PRIVATE LIMITED (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section § 2.903 of the FCC rules. Sincerely yours, JUHAIM I A J Applicant Signature Printed Name: JUHAIM I AJ Title: HEAD OF OEM BUSINESS & OPERATIONS Address: No: R32, V N Arcade, I Floor, KSSIDC Industrial Estate, I Cross, Bommasandra, Industrial Area, II Phase, Jigani Link Road, Yarandahally, Circle, Bangalore, Karnataka, India ,560099 Tel.: +91 97469 70965 Email: [email protected]

AptEner Mechatronics Private Limited, No. R32, V N Arcade, 1 st Floor, KSSIDC Industrial Estate,1 st Cross, Bommasandra Industrial Area 2 nd Phase Jigani Link Road, Yarandahalli Circle, Bangalore - 560099 CIN : U74999KA2017PTC099282 https://thebluarmor.com. Tel: +91 6360607079 Authority to Act as Agent Date: 26-03-2026 TUV Rheinland of North America, Inc. 1279 Quarry Lane., Suite. A Pleasanton, CA 94566 To Whom It May Concern: I appoint Vinay N, TUV Rheinland India Pvt Ltd. to act as our agent in the preparation of this application for equipment certification. I certify that submitted documents properly describe the device or system for which equipment certification is sought. I also certify that each unit manufactured, imported or marketed, as defined in the FCC or Industry Canada’s regulations will have affixed to it a label identical to that submitted for approval with this application. For instances where our authorized agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by TUV Rheinland Group, still resides with “APTENER MECHATRONICS PRIVATE LIMITED”, “No: R32, V N Arcade, I Floor, KSSIDC Industrial Estate, I Cross, Bommasandra, Industrial Area, II Phase, Jigani Link Road, Yarandahally, Circle, Bangalore, Karnataka, India ,560099” For TCB applications, We certify that we are not subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Further, no party, as defined in 47 CFR 1.2002 (b), to the application is subject to denial of federal benefits, that includes FCC benefits. Thank you, Agency Agreement Date: 26-03-2023 Agreement is valid for 12 months from the above date. By: JUHAIM I A J JUHAIM I A J (Signature) (Print name) HEAD OF OEM BUSINESS & OPERATIONS +91 97469 70965 (Title) (Telephone) On behalf of: APTENER MECHATRONICS PRIVATE LIMITED (Company Name)

AptEner Mechatronics Private Limited, No. R32, V N Arcade, 1 st Floor, KSSIDC Industrial Estate,1 st Cross, Bommasandra Industrial Area 2 nd Phase Jigani Link Road, Yarandahalli Circle, Bangalore - 560099 CIN : U74999KA2017PTC099282 https://thebluarmor.com. Tel: +91 6360607079 Date: 26/03/2026 Federal Communications Commission Equipment Authorization Branch 7435 Oakland Mills Road, Columbia, MD 21046, USA Subject: Confidentiality Request for FCC ID: 2BUSF-MI87635340-01 Pursuant to FCC 47 CRF 0.457(d), the applicant requests that a part of the subject FCC/IC application be held confidential. Type of Confidentiality Requested Exhibit Short Term Permanent Block Diagrams Short Term Permanent External Photo Short Term Permanent Internal Photos *** Short Term Permanent Description of the Device Short Term Permanent Schematics Short Term Permanent Test Setup *** Short Term Permanent Tune-Up Procedure Short Term Permanent User’s Manual *** Short Term Permanent Part List/ Antenna Gain Information Datasheet APTENER MECHATRONICS PRIVATE LIMITED has spent substantial effort in developing this product and it is one of the first of its kind in industry. Having the subject information easily available to "competition" would negate the advantage they have achieved by developing this product. Not protecting the details of the design will result in financial hardship. Permanent Confidentiality: The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. (*** Exceptional case for Permanent Confidentiality for these Exhibits by PAG only) Short-Term Confidentiality: The applicant requests the exhibits selected above as short term confidential be withheld from public view for a period of specify number of days not to exceed 180 days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. Applicant is also aware that they are responsible to notify TUV Rheinland in the event information regarding the product or the product is made available to the public. TUV Rheinland will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04-1705. Sincerely, By: JUHAIM I A J HEAD OF OEM BUSINESS & OPERATIONS Tel : Email: [email protected]

MODEL DECLARATION FOR C60 & C40 Dear Sir/Madam, We BluArmor, hereby declare that the following models: ● C60 ● C40 are based on the same core hardware and RF design platform, and are electrically and functionally identical with respect to FCC compliance requirements. Both models share the same: ● RF module and antenna design ● PCB layout and critical components ● Operating frequency bands and output power characteristics ● Power supply architecture and battery system ● Firmware, communication protocols, and Bluetooth functionality The differences between the models are limited to non-RF aspects, such as: ● Product configuration and feature variations ● Housing sticker ● Accessories and user interface differences These differences do not affect RF performance, EMC characteristics, or compliance with FCC requirements. Based on the above, we confirm that the test data generated for one model is representative of the other, and both models comply with applicable FCC regulations. We kindly request you to consider both models under a single FCC certification. Thank you. AZBAR ALI QUALITY CONTROL 04 APRIL 2026

AptEner Mechatronics Private Limited, No. R32, V N Arcade, 1 st Floor, KSSIDC Industrial Estate,1 st Cross, Bommasandra Industrial Area 2 nd Phase Jigani Link Road, Yarandahalli Circle, Bangalore - 560099 CIN : U74999KA2017PTC099282 https://thebluarmor.com. Tel: +91 6360607079 LABEL

Prüfbericht – Produkte Test Report - Products Prüfbericht-Nr.: Test report no.: IN26B92F 001 Auftrags-Nr.: Order no.: 147173165 20 Seite 1 von 5 Page 1 of 5 Kunden-Referenz-Nr.: Client reference no.: 2131006 Auftragsdatum: Order date: 2026-03-03 Auftraggeber: Client: APTENER MECHATRONICS PRIVATE LIMITED No: R32, V N Arcade, I Floor, KSSIDC Industrial Estate, I Cross, Bommasandra, Industrial Area, II Phase, Jigani Link Road, Yarandahally, Circle, Bangalore, Karnataka, India ,560099 Prüfgegenstand: Test item: BLUARMOR C60 & BLUARMOR C40 Bezeichnung / Typ-Nr.: Identification / Type no.: Main Model: C60 Associated Model: C60 Pro, C60+, C40 Auftrags-Inhalt: Order content: Testing and issue of Test Report Prüfgrundlage: Test specification: FCC Part1 1.1310, KDB 447498 D01 Wareneingangsdatum: Date of sample receipt: 2026-03-23 Prüfmuster-Nr.: Test sample no: A004232549-001 A004232549-002 Prüfzeitraum: Testing period: 2026-03-23 - 2026-03-31 Ort der Prüfung: Place of testing: Wireless laboratory, Bangalore Prüflaboratorium: Testing laboratory: TÜV Rheinland (India) Pvt.Ltd., 27/B, 2nd Cross, Electronic City Phase1 Bangalore -560 100, India Prüfergebnis*: Test result*: Pass geprüft von: tested by: genehmigt von: authorized by: Datum: Date: 2026-05-06 Ausstellungsdatum: Issue date: 2026-05-06 Stellung / Position: Darshan D Senior Engineer Stellung / Position: M.V.Naveen Kumar Senior Engineerr Sonstiges / Other: FCC ID:2BUSF-MI87635340-01 Zustand des Prüfgegenstandes bei Anlieferung: Condition of the test item at delivery: Prüfmuster vollständig und unbeschädigt Test item complete and undamaged * Legende: P(ass) = entspricht o.g. Prüfgrundlage(n) F(ail) = entspricht nicht o.g. Prüfgrundlage(n) N/A = nicht anwendbar N/T = nicht getestet * Legend: P(ass) = passed a.m. test specification(s) F(ail) = failed a.m. test specification(s) N/A = not applicable N/T = not tested Dieser Prüfbericht bezieht sich nur auf das o.g. Prüfmuster und darf ohne Genehmigung der Prüfstelle nicht auszugsweise vervielfältigt werden. Dieser Bericht berechtigt nicht zur Verwendung eines Prüfzeichens. This test report only relates to the above mentioned test sample. Without permission of the test center this test report is not permitted to be duplicated in extracts. This test report does not entitle to carry any test mark. TÜV Rheinland (India) Pvt. Ltd. # 27/B, 2nd Cross Road, Electronics City Phase 1, Bangalore – 560 100, INDIA. Mail: [email protected] ∙ Web: www.ind.tuv.com V101023IMEASR Produkte Products www.tuv.com Prüfbericht - Nr.: Test Report No.: IN26B92F 001 Seite 2 von 5 Page 2 of 5 1 Alle eingesetzten Prüfmittel waren zum angegebenen Prüfzeitraum gemäß eines festgelegten Kalibrierungsprogramms unseres Prüfhauses kalibriert. Sie entsprechen den in den Prüfprogrammen hinterlegten Anforderungen. Die Rückverfolgbarkeit der eingesetzten Prüfmittel ist durch die Einhaltung der Regelungen unseres Managementsystems gegeben. Detaillierte Informationen bezüglich Prüfkonditionen, Prüfequipment und Messunsicherheiten sind im Prüflabor vorhanden und können auf Wunsch bereitgestellt werden. The equipment used during the specified testing period was calibrated according to our test laboratory calibration program. The equipment fulfils the requirements included in the relevant standards. The traceability of the test equipment used is ensured by compliance with the regulations of our management system. Detailed information regarding test conditions, equipment and measurement uncertainty is available in the test laboratory and could be provided on request. 2 Wie vertraglich vereinbart, wurde dieses Dokument nur digital unterzeichnet. Der TÜV Rheinland hat nicht überprüft, welche rechtlichen oder sonstigen diesbezüglichen Anforderungen für dieses Dokument gelten. Diese Überprüfung liegt in der Verantwortung des Benutzers dieses Dokuments. Auf Verlangen des Kunden kann der TÜV Rheinland die Gültigkeit der digitalen Signatur durch ein gesondertes Dokument bestätigen. Diese Anfrage ist an unseren Vertrieb zu richten. Eine Umweltgebühr für einen solchen zusätzlichen Service wird erhoben. Informationen zur Verifizierung der Authentizität unserer Dokumente erhalten Sie auf folgender Webseite: go.tuv.com/digital-signature As contractually agreed, this document has been signed digitally only. TUV Rheinland has not verified and unable to verify which legal or other pertaining requirements are applicable for this document. Such verification is within the responsibility of the user of this document. Upon request by its client, TUV Rheinland can confirm the validity of the digital signature by a separate document. Such request shall be addressed to our Sales department. An environmental fee for such additional service will be charged. For information on verifying the authenticity of our documents, please visit the following website: go.tuv.com/digital-signature 3 Prüfklausel mit der Note * wurden an qualifizierte Unterauftragnehmer vergeben und sind unter der jeweiligen Prüfklausel des Berichts beschrieben. Abweichungen von Prüfspezifikation(en) oder Kundenanforderungen sind in der jeweiligen Prüfklausel im Bericht aufgeführt. Test clauses with remark of * are subcontracted to qualified subcontractors and descripted under the respective test clause in the report. Deviations of testing specification(s) or customer requirements are listed in specific test clause in the report. Produkte Products www.tuv.com Prüfbericht - Nr.: Test Report No.: IN26B92F 001 Seite 3 von 5 Page 3 of 5 4 Die Entscheidungsregel für Konformitätserklärungen basierend auf numerischen Messergebnisen in diesem Prüfbericht basiert auf der "Null-Grenzwert-Regel" und der "Einfachen Akzeptanz" gemäß ILAC G8:2019 und IEC Guide 115:2023, es sei denn, in der auf Seite 1 dieses Berichts genannten angewandten Norm ist etwas anderes festgelegt oder vom Kunden gewünscht. Dies bedeutet, dass die Messunsicherheit nicht berücksichtigt wird und daher auch nicht im Prüfbericht angegeben wird.…

Text truncated - open the document above for the full version.

Prüfbericht - Produkte Test Report - Products Prüfbericht-Nr.: Test report no.: IN26VXOC 001 Auftrags-Nr.: Order no.: 147173165 020 Seite 1 von 90 Page 1 of 90 Kunden-Referenz-Nr.: Client reference no.: 2131006 Auftragsdatum: Order date: 2026-03-03 Auftraggeber: Client: APTENER MECHATRONICS PRIVATE LIMITED No: R32, V N Arcade, I Floor, KSSIDC Industrial Estate, I Cross, Bommasandra, Industrial Area, II Phase, Jigani Link Road, Yarandahally, Circle, Bangalore, Karnataka, India ,560099 Prüfgegenstand: Test item: BLUARMOR C60 & BLUARMOR C40 Bezeichnung / Typ-Nr.: Identification / Type no.: Main Model: C60 Associated Model: C60 Pro, C60+, C40 Auftrags-Inhalt: Order content: Testing and issue of Test Report Prüfgrundlage: Test specification: FCC Part15 SubpartC 15.247; 15.205; 15.209 Wareneingangsdatum: Date of sample receipt: 2026-03-23 Prüfmuster-Nr.: Test sample no: A004232549-001 A004232549-002 Prüfzeitraum: Testing period: 2026-03-23 - 2026-03-31 Ort der Prüfung: Place of testing: Wireless laboratory, Bangalore Prüflaboratorium: Testing laboratory: TÜV Rheinland (India) Pvt.Ltd., 27/B, 2nd Cross, Electronic City Phase1 Bangalore -560 100, India Prüfergebnis*: Test result*: Pass geprüft von: tested by: genehmigt von: authorized by: Datum: Date: 2026-05-06 Ausstellungsdatum: Issue date: 2026-05-06 Stellung / Position: Darshan D Senior Engineer Stellung / Position: M.V.Naveen Kumar Senior Engineer Sonstiges / Other: FCC ID:2BUSF-MI87635340-01 Zustand des Prüfgegenstandes bei Anlieferung: Condition of the test item at delivery: Prüfmuster vollständig und unbeschädigt Test item complete and undamaged * Legende: P(ass) = entspricht o.g. Prüfgrundlage(n) F(ail) = entspricht nicht o.g. Prüfgrundlage(n) N/A = nicht anwendbar N/T = nicht getestet * Legend: P(ass) = passed a.m. test specification(s) F(ail) = failed a.m. test specification(s) N/A = not applicable N/T = not tested Dieser Prüfbericht bezieht sich nur auf das o.g. Prüfmuster und darf ohne Genehmigung der Prüfstelle nicht auszugsweise vervielfältigt werden. Dieser Bericht berechtigt nicht zur Verwendung eines Prüfzeichens. This test report only relates to the above mentioned test sample. Without permission of the test center this test report is not permitted to be duplicated in extracts. This test report does not entitle to carry any test mark. TÜV Rheinland (India) Pvt. Ltd. # 27/B, 2nd Cross Road, Electronics City Phase 1, Bangalore – 560 100, INDIA. Mail: [email protected] ∙ Web: www.ind.tuv.com V101023IMEASR Produkte Products www.tuv.com Prüfbericht - Nr.: Test Report No.: IN26VXOC 001 Seite 2 von 90 Page 2 of 90 1 Alle eingesetzten Prüfmittel waren zum angegebenen Prüfzeitraum gemäß eines festgelegten Kalibrierungsprogramms unseres Prüfhauses kalibriert. Sie entsprechen den in den Prüfprogrammen hinterlegten Anforderungen. Die Rückverfolgbarkeit der eingesetzten Prüfmittel ist durch die Einhaltung der Regelungen unseres Managementsystems gegeben. Detaillierte Informationen bezüglich Prüfkonditionen, Prüfequipment und Messunsicherheiten sind im Prüflabor vorhanden und können auf Wunsch bereitgestellt werden. The equipment used during the specified testing period was calibrated according to our test laboratory calibration program. The equipment fulfils the requirements included in the relevant standards. The traceability of the test equipment used is ensured by compliance with the regulations of our management system. Detailed information regarding test conditions, equipment and measurement uncertainty is available in the test laboratory and could be provided on request. 2 Wie vertraglich vereinbart, wurde dieses Dokument nur digital unterzeichnet. Der TÜV Rheinland hat nicht überprüft, welche rechtlichen oder sonstigen diesbezüglichen Anforderungen für dieses Dokument gelten. Diese Überprüfung liegt in der Verantwortung des Benutzers dieses Dokuments. Auf Verlangen des Kunden kann der TÜV Rheinland die Gültigkeit der digitalen Signatur durch ein gesondertes Dokument bestätigen. Diese Anfrage ist an unseren Vertrieb zu richten. Eine Umweltgebühr für einen solchen zusätzlichen Service wird erhoben. Informationen zur Verifizierung der Authentizität unserer Dokumente erhalten Sie auf folgender Webseite: go.tuv.com/digital-signature As contractually agreed, this document has been signed digitally only. TUV Rheinland has not verified and unable to verify which legal or other pertaining requirements are applicable for this document. Such verification is within the responsibility of the user of this document. Upon request by its client, TUV Rheinland can confirm the validity of the digital signature by a separate document. Such request shall be addressed to our Sales department. An environmental fee for such additional service will be charged. For information on verifying the authenticity of our documents, please visit the following website: go.tuv.com/digital-signature 3 Prüfklausel mit der Note * wurden an qualifizierte Unterauftragnehmer vergeben und sind unter der jeweiligen Prüfklausel des Berichts beschrieben. Abweichungen von Prüfspezifikation(en) oder Kundenanforderungen sind in der jeweiligen Prüfklausel im Bericht aufgeführt. Test clauses with remark of * are subcontracted to qualified subcontractors and descripted under the respective test clause in the report. Deviations of testing specification(s) or customer requirements are listed in specific test clause in the report. Produkte Products www.tuv.com Prüfbericht - Nr.: Test Report No.: IN26VXOC 001 Seite 3 von 90 Page 3 of 90 4 Die Entscheidungsregel für Konformitätserklärungen basierend auf numerischen Messergebnisen in diesem Prüfbericht basiert auf der "Null-Grenzwert-Regel" und der "Einfachen Akzeptanz" gemäß ILAC G8:2019 und IEC Guide 115:2023, es sei denn, in der auf Seite 1 dieses Berichts genannten angewandten Norm ist etwas anderes festgelegt oder vom Kunden gewünscht. Dies bedeutet, dass die Messunsicherheit nicht berücksichtigt wird und daher auch nicht im Prüfbericht…

Text truncated - open the document above for the full version.

Description: 2.4-2.4835GHz Ceramic SMT antenna, 4x6.25mm keep out area PART NUMBER: W3008C Series: Chip Antenna Issue: 1823 In the effort to improve our products, we reserve the right to make changes judged to be necessary. CONFIDENTIAL AND PROPRIETARY INFORMATION This document contains confidential and proprietary information ofPulse Electronics, Inc. (Pulse) and is protected by copyright, trade secret and other state and federal laws. Its receipt or possession does not convey any rights to reproduce, disclose its contents, or to manufacture, use or sell anything it may describe. Reproduction, disclosure or use without specific written authorization of Pulse is strictly forbidden. For more information: Pulse Worldwide HeadquartersPulse/Larsen AntennasEurope HeadquartersPulse (Suzhou) Wireless Products Co, Inc. 15255 Innovation Drive #100Pulse GmbH & Do, KG99 HuoJuRoad(#29 Bldg,4 th Phase San Diego, CA 92128Vancouver, WA 98683Zeppelinstrasse15Suzhou New District USAUSAHerrenberg, Germany Jiangsu Province, Suzhou 215009 PR China Tel:1-858-674-8100Tel: 1-360-944-7551 - Tel: 49 7032 7806 0 Tel: 86 512 6807 9998 18110 SE 34 th St Bldg2 Suite 250 Features: Applications: All dimensions are in mm / inches •2400-2483.5MHz •Size: 3.2 x 1.6 x 1.1mm •Efficiency: 68 % •Gain: 1.3 dBi •Polarization: Linear •Power Handling: 5W •RoHS Compliant •Moisture Sensitivity Level MSL3 •Bluetooth, BLE, Zigbee, WiFi •2.4GHz ISM band radios 1 Issue: 1823 In the effort to improve our products, we reserve the right to make changes judged to be necessary. CONFIDENTIAL AND PROPRIETARY INFORMATION This document contains confidential and proprietary information ofPulse Electronics, Inc. (Pulse) and is protected by copyright, trade secret and other state and federal laws. Its receipt or possession does not convey any rights to reproduce, disclose its contents, or to manufacture, use or sell anything it may describe. Reproduction, disclosure or use without specific written authorization of Pulse is strictly forbidden. Description: 2.4-2.4835GHz Ceramic SMT antenna, 4x6.25mm keep out area PART NUMBER: W3008C Series: Chip Antenna 2 Frequency2400-2483.5MHz NominalImpedance50 Return Loss-8dB Radiation PatternOmni Gain1.3dBi Efficiency68% PolarizationLinear Power Withstanding5W Overall Length3.2x1.6x1.1mm Weight33mg Antenna Color / MaterialCeramic MECHANICALSPECIFICATIONS ENVIRONMENTAL SPECIFICATIONS ELECTRICAL SPECIFICATIONS Operating Temperature-40~+85°C Storage Temperature-40~+85°C RoHS CompliantYes (*) All RF parameters measured on 80*37mm PCB with 4*6.25mm clearance in free space. No matching component used. Issue: 1823 In the effort to improve our products, we reserve the right to make changes judged to be necessary. CONFIDENTIAL AND PROPRIETARY INFORMATION This document contains confidential and proprietary information ofPulse Electronics, Inc. (Pulse) and is protected by copyright, trade secret and other state and federal laws. Its receipt or possession does not convey any rights to reproduce, disclose its contents, or to manufacture, use or sell anything it may describe. Reproduction, disclosure or use without specific written authorization of Pulse is strictly forbidden. Description: 2.4-2.4835GHz Ceramic SMT antenna, 4x6.25mm keep out area PART NUMBER: W3008C Series: Chip Antenna 3 MECHANICALDRAWING No.Terminal NameTerminal Dimensions 1Feed /GND0.62 x 1.36 mm 2Feed /GND0.62 x 1.36 mm Antenna is symmetrical, either one of pads 1 or 2 can be used as feed terminal 12 Issue: 1823 In the effort to improve our products, we reserve the right to make changes judged to be necessary. CONFIDENTIAL AND PROPRIETARY INFORMATION This document contains confidential and proprietary information ofPulse Electronics, Inc. (Pulse) and is protected by copyright, trade secret and other state and federal laws. Its receipt or possession does not convey any rights to reproduce, disclose its contents, or to manufacture, use or sell anything it may describe. Reproduction, disclosure or use without specific written authorization of Pulse is strictly forbidden. Description: 2.4-2.4835GHz Ceramic SMT antenna, 4x6.25mm keep out area PART NUMBER: W3008C Series: Chip Antenna 4 MECHANICAL DRAWING AND TERMINAL CONFIGURATION Ground cleared under antenna, clearance area 4 mm x 6.25mm Issue: 1823 In the effort to improve our products, we reserve the right to make changes judged to be necessary. CONFIDENTIAL AND PROPRIETARY INFORMATION This document contains confidential and proprietary information ofPulse Electronics, Inc. (Pulse) and is protected by copyright, trade secret and other state and federal laws. Its receipt or possession does not convey any rights to reproduce, disclose its contents, or to manufacture, use or sell anything it may describe. Reproduction, disclosure or use without specific written authorization of Pulse is strictly forbidden. Description: 2.4-2.4835GHz Ceramic SMT antenna, 4x6.25mm keep out area PART NUMBER: W3008C Series: Chip Antenna 5 MECHANICAL DRAWING AND TERMINAL CONFIGURATION PCB contact pads No.Terminal NameTerminal Dimensions 1Feed 0,80 x 0,65 mm 2GND0,80x 0,65mm 3GND0,80 x 1,60 mm 1 2 3 Recommended Antenna Pad Dimensions on PCB Layout (top surface) Ground cleared under antenna, clearance area 4 mm x 6.25 mm Issue: 1823 In the effort to improve our products, we reserve the right to make changes judged to be necessary. CONFIDENTIAL AND PROPRIETARY INFORMATION This document contains confidential and proprietary information ofPulse Electronics, Inc. (Pulse) and is protected by copyright, trade secret and other state and federal laws. Its receipt or possession does not convey any rights to reproduce, disclose its contents, or to manufacture, use or sell anything it may describe. Reproduction, disclosure or use without specific written authorization of Pulse is strictly forbidden. Description: 2.4-2.4835GHz Ceramic SMT antenna, 4x6.25mm keep out area PART NUMBER: W3008C Series: Chip Antenna 6 MECHANICAL DRAWING AND TERMINAL…

Text truncated - open the document above for the full version.