2BUU5CHWireless Module

1 Features  Embedded low-power KM4 MCU, which can also function as an application processor  Clock rate: 100 MHz  Working voltage: 3.0 V to 3.6 V  Peripherals: seven GPIOs and two universal asynchronous (UARTs)  Wi-Fi /BT connectivity  802.11b/g/n20  Channels 1 to 14 at 2.4 GHz  Compatible with Bluetooth low energy (BLE) 4.2 power)  WPA and WPA2 security modes  Up to +20 dBm EIPR  Smart network configuration for Android and iOS devices  FPC IPEX antenna  Certified by CE, FCC, and SRRC  Working temperature: 1.2 Applications  Intelligent building  Smart household and home appliances  Smart socket and light  Industrial wireless control  Baby monitor  Network camera  Intelligent bus WBR1 1 power KM4 MCU, which can also function as an application processor Clock rate: 100 MHz Working voltage: 3.0 V to 3.6 V Peripherals: seven GPIOs and two universal asynchronous receivers/transmitters Channels 1 to 14 at 2.4 GHz Compatible with Bluetooth low energy (BLE) 4.2 (Up to +9dBm EIPR WPA and WPA2 security modes EIPR output power in 802.11b mode Smart network configuration for Android and iOS devices antenna Certified by CE, FCC, and SRRC Working temperature: –20°C to +85°C Smart household and home appliances control WBR1-IPEX Datasheet power KM4 MCU, which can also function as an application processor receivers/transmitters EIPR output 1 Feature 2 Module Interfaces ................................ 2.1 Dimensions and Footprint 2.2 Interface Pin Definition 3 Electrical Parameters ................................ 3.1 Absolute Electrical Parameters 3.2 Electrical Conditions 3.3 RF Current Consumption 3.4 Working Current ................................ 4 RF Features ................................ 4.1 Basic RF Features 4.2 TX Performance ................................ 4.3 RX Performance ................................ 5 Antenna Information ................................ 5.1 Antenna Type ................................ 5.2 Antenna Interference Reduction 6 Packaging Information and Production Instructions 6.1 Mechanical Dimensions 6.2 Recommended PCB Layout 6.3 Production Instructions 6.4 Recommended Oven Temperature Curve 6.5 Storage Conditions 7 MOQ and Packing Information WBR1 2 Contents ................................................................................................ 2.1 Dimensions and Footprint ................................................................ 2.2 Interface Pin Definition ........................................................................................... ................................................................................................ 3.1 Absolute Electrical Parameters ................................................................ 3.2 Electrical Conditions ............................................................................................... 3.3 RF Current Consumption ................................................................ ................................................................................................ ................................................................................................ res ................................................................................................ ................................................................................................ ................................................................................................ ................................................................................................ ................................................................................................ 5.2 Antenna Interference Reduction ................................................................ 6 Packaging Information and Production Instructions ....................................................... 6.1 Mechanical Dimensions ....................................................................................... 6.2 Recommended PCB Layout ................................................................ 6.3 Production Instructions ......................................................................................... 6.4 Recommended Oven Temperature Curve ........................................................... 6.5 Storage Conditions ............................................................................................... 7 MOQ and Packing Information ....................................................................................... WBR1-IPEX Datasheet ............ 1 ............................................. 4 ...................................................... 4 ........................... 4 ........................................ 6 .............................................. 6 ............................... 6 ....................................................... 7 ..................................... 7 ................................ ................................ ......................................9 ........................................ 10 ........................................ 10 ........................................... 10 ....................... 10 ....................... 10 ................................................. 12 ......................... 13 ........................... 15 ............................... 16 ....................... 17 ................................................................................................................................................................ ................ ...................... 8 ............................... 8 ..... 9 Table 2-1 WBR1-IPEX interface pins Table 3-1 Absolute electrical parameters Table 3-2 Normal electrical conditions Table 3-3 Power consumption during constant transmission Table 3-4 Power consumption during constant receiving Table 3-5 WBR1-IPEX working current Table 4-1 Basic RF features Table 4-2 Performance during constant transmission Table 4-3 RX sensitivity ............…

Text truncated - open the document above for the full version.

Rev 1/26/2023 Chinabest Home Appliance Co., Ltd. Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 03-03-2026 Ref: Attestation Statements Part 2.911(d)(5)(i) Filing FCC ID: 2BUU5CH Chinabest Home Appliance Co., Ltd.(“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Chinabest Home Appliance Co., Ltd.(“the applicant”) certifies that the equipment for which authorization is sought does not include cybersecurity or anti-virus software produced or provided by Kaspersky Lab, Inc. or any of its successors and assignees, including equipment with integrated Kaspersky Lab, Inc. (or any of its successors and assignees) cybersecurity or anti-virus software pursuant to DA-24-886 and KDB 986446 D01 Covered Equipment Guidance section B(2a). Device is inherently compliant based on hardware limitations or software controls. or A Software Bill of Materials (SBOM) is provided to the TCB for review, and The end-user or third parties cannot install additional software on this device. Sincerely, (Applicant signature) Cecilia Cheung Rev 1/26/2023 Chinabest Home Appliance Co., Ltd. Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 03-03-2026 Ref: Attestation Statements Part 2.911(d)(5)(ii) Filing FCC ID:2BUU5CH Chinabest Home Appliance Co., Ltd.(“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing “covered” equipment. Sincerely, (Applicant signature) Cecilia Cheung

Rev 1/26/2023 Chinabest Home Appliance Co., Ltd. Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: March 3, 2026 Ref: Attestation Statements Part 2.911(d)(7) Filing FCC ID or Grantee Code: 2BUU5CH Applicant FRN: 0037982915 Chinabest Home Appliance Co., Ltd.(“the applicant”) certifies that, as of the date of the filing of the application, FCC US Agent, LLC is our designated U.S. agent for service of process for the above referenced FCC ID. Chinabest Home Appliance Co., Ltd. accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. FCC US Agent, LLC accepts, as of the date of the filing of the application, the obligation of the designated U.S. agent for service of process for the above referenced FCC ID. Designated U.S. Agent Information: Name: FCC US Agent, LLC U.S. Agent FRN: 0033402884 Address: 3722 Illinois Avenue, Saint Charles, IL, 60174, USA Contact Person: Tim Payne Tel.: 708-571-3148 Email: [email protected] Sincerely, Chinabest Home Appliance Co., Ltd. FCC US Agent, LLC Cecilia Cheung Tim Payne [Insert Applicant signature] [U.S. Agent signature]

Chinabest Home Appliance Co., Ltd. Date:March 3, 2026 Federal Communications Commission Authorization and Evaluation Division Confidentiality Request regarding application for certification of FCC ID:2BUU5CH Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, we hereby request confidential treatment of information accompanying this application as outlined below: Exhibit Type File Name Schematics Block Diagram Operational Description Schematic.pdf Block Diagram.pdf Operational Description.pdf The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, Chinabest Home Appliance Co., Ltd. Signature Cecilia Cheung/Certification Manager Typed name and Title

Chinabest Home Appliance Co., Ltd. No.29, Fuqing 2 Road, Henglan, Zhongshan, Guangdong, China MODULAR APPROVAL LETTER FCC ID: 2BUU5CH Modular Approval Requirement Yes No (i)The radio elements of the modular transmitter must have their own shielding. The physical crystal and tuning capacitors may be located external to the shielded radio elements. √ (ii)The modular transmitter must have buffered modulation/data inputs (if such inputs are provided) to ensure that the module will comply with part 15 requirements under conditions of excessive data rates or over-modulation. √ (iii)The modular transmitter must have its own power supply regulation. √ (iv)The modular transmitter must comply with the antenna and transmission system requirements of §§15.203, 15.204(b) and 15.204(c). The antenna must either be permanently attached or employ a ‘‘unique’’ antenna coupler (at all connections between the module and the antenna, including the cable). The ‘‘professional installation’’ provision of §15.203 is not applicable to modules but can apply to limited modular approvals under paragraph (b) of this section. √ (v)The modular transmitter must be tested in a stand-alone configuration. √ (vi)The modular transmitter must be equipped with either a permanently affixed label or must be capable of electronically displaying its FCC identification number. √ (VII)The modular transmitter must comply with any specific rules or operating requirements that ordinarily apply to a complete transmitter and the manufacturer must provide adequate instructions along with the module to explain any such requirements. A copy of these instructions must be included in the application for equipment authorization. √ (viii)The modular transmitter must comply with any applicable RF exposure requirements in its final configuration. √ Sincerely, Chinabest Home Appliance Co., Ltd. Cecilia Cheung/Certification Manager Typed name and Title

Chinabest Home Appliance Co., Ltd. FCC ID: 2BUU5CH POWER OF ATTORNEY Date: February 28, 2026 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 To Whom It May Concern: We, the undersigned, hereby authorize Waltek Testing Group (Foshan) Co., Ltd. (Dara Zhou) on our behalf, to apply to the Federal Communications Commission on our equipment. Any and all acts carried out by Waltek Testing Group (Foshan) Co., Ltd. (Dara Zhou) on our behalf shall have the same effect as acts of our own. This authorization expires on February 28, 2027 . This is to advise that we are in full compliance with the Anti-Drug Abuse Act. We, Chinabest Home Appliance Co., Ltd. are not subject to a denial of federal benefits pursuant to Section 5301 of the Anti-Drug Act of 1988, 21 USC853a, and no party to the application is subject to a denial of federal benefits pursuant to that section. Sincerely, Chinabest Home Appliance Co., Ltd. Signature Cecilia Cheung/Certification Manager Typed name and Title

Waltek Testing Group (Foshan) Co., Ltd. http://www.waltek.com.cn Reference No.: WTF26F01009549W Page 1 of 3 Picture 1 Picture 2 ANT Waltek Testing Group (Foshan) Co., Ltd. http://www.waltek.com.cn Reference No.: WTF26F01009549W Page 2 of 3 Picture 3 Picture 4 Waltek Testing Group (Foshan) Co., Ltd. http://www.waltek.com.cn Reference No.: WTF26F01009549W Page 3 of 3 Picture 5

FCC ID:2BUU5CH

Waltek Testing Group (Foshan) Co., Ltd. http://www.waltek.com.cn Reference No.: WTF26F01009549W Page 1 of 1 Picture 1 IPEX ANT

Waltek Testing Group (Foshan) Co., Ltd. http://www.waltek.com.cn RF Exposure Requirements 1 General Information Client Information Applicant ....................................... : Chinabest Home Appliance Co., Ltd. Address of applicant ................... : No.29, Fuqing 2 Road, Henglan,Zhongshan, Guangdong, China . Manufacturer ................................. : The same as above Address of manufacturer ............. : The same as above General Description of E.U.T FCC ID ............................................ : 2BUU5CH Product Name ............................... : Wireless Module Model No. ..................................... : WBR1-IPEX Model Description ........................ : --- Rated Voltage ................................ : DC 3.0-3.6V Battery Capacity ........................... : --- Power Adapter .............................. : --- Technical Characteristics of EUT  WiFi Support Standards ....................... : 802.11b, 802.11g, 802.11n Frequency Range ......................... : 2412-2462MHz for 802.11b/g/n(HT20) RF Output Power .......................... : 15.25 dBm (Conducted ) Modulation .................................... : 802.11b: DSSS(DBPSK/DQPSK/CCK) 802.11g/n: OFDM (BPSK/QPSK/16QAM/64QAM) Data Rate ....................................... : 1Mbps for 802.11b; 54Mbps for 802.11g; MCS7 for 802.11n Quantity of Channels ................... : 11 for 802.11b/g/n(HT20) Channel Separation ...................... : 5MHz Type of Antenna ........................... : FPC IPEX Antenna Antenna Gain ................................ : -4.84dBi (Declared by the manufacturer) Waltek Testing Group (Foshan) Co., Ltd. http://www.waltek.com.cn  BLE Bluetooth Version ........................ : Bluetooth LE Frequency Range ......................... : 2402-2480MHz RF Output Power .......................... : 6.205dBm (Conducted) Modulation .................................... : GFSK Data Rate ....................................... : 1Mbps Quantity of Channels ................... : 40 Channel Separation ...................... : 2MHz Type of Antenna ........................... : FPC IPEX Antenna Antenna Gain ................................ : -4.84dBi (Declared by the manufacturer) 2 Applicable Standard According to §1.1307(b)(1) and KDB 447498 D01 General RF Exposure Guidance v06, system operating under the provisions of this section shall be operating in a manner that the public is not exposed to radio frequency energy level in excess limit for maximum permissible exposure. (a) Limits for Occupational / Controlled Exposure Frequency range (MHz) Electric Field Strength (E) (V/m) Magnetic Field Strength (H) (A/m) Power Density (S) (mW/cm 2 ) Averaging Times | E | 2 , | H | 2 or S (minutes) 0.3-3.0 614 1.63 (100)* 6 3.0-30 1842/f 4.89/f (900/f)* 6 30-300 61.4 0.163 1.0 6 300-1500 / / F/300 6 1500-100000 / / 5 6 (b) Limits for General Population / Uncontrolled Exposure Frequency range (MHz) Electric Field Strength (E) (V/m) Magnetic Field Strength (H) (A/m) Power Density (S) (mW/cm 2 ) Averaging Times | E | 2 , | H | 2 or S (minutes) 0.3-1.34 614 1.63 (100)* 30 1.34-30 824/f 2.19/f (180/f)* 30 30-300 27.5 0.073 0.2 30 300-1500 / / F/1500 30 1500-100000 / / 1 30 Note: f = frequency in MHz: * = Plane-wave equivalents power density Waltek Testing Group (Foshan) Co., Ltd. http://www.waltek.com.cn 3 Calculation Method S = (30*P*G) / (377*R 2 ) S = power density (in appropriate units, e.g., mw/cm 2 ) P = power input to the antenna (in appropriate units, e.g., mw) G = power gain of the antenna in the direction of interest relative to an isotropic radiator, the power gain factor is normally numeric gain. R = distance to the center of radiation of the antenna (in appropriate units, e.g., cm), R=20cm. 4 MPE Calculation Result Frequency (MHz) Antenna Gain (dBi) Numeric gain Conducted Power (dBm) Maximum Tune-up output power PD (mW/cm2) Limit (mW/cm2) (dBm) (mW) 2412-2462 -4.84 0.33 15.25 16.00 39.81 0.00260 1.0 2402-2480 -4.84 0.33 6.205 7.00 5.01 0.00033 1.0 Result: Pass ======End of Report======

Waltek Testing Group (Foshan) Co., Ltd. http://www.waltek.com.cn Page 1 of 46 WT-510-201-12-A TEST REPORT Reference No. .................... : WTF26F01009549W001 FCC ID ................................ : 2BUU5CH Applicant ............................ : Chinabest Home Appliance Co., Ltd. Address .............................. : No.29, Fuqing 2 Road, Henglan,Zhongshan, Guangdong, China . Manufacturer .................... : The same as above Address .............................. : The same as above Product Name .................... : Wireless Module Model No. ........................... : WBR1-IPEX Test specification .............. : FCC CFR47 Part 15 Subpart C (Section 15.247) Date of Receipt sample .... : 2026-01-20 Date of Test ....................... : 2026-01-26 to 2026-02-02 Date of Issue ...................... : 2026-03-10 Test Report Form No. ....... : WEW-15247A-01B Test Result ......................... Pass Remarks: The results shown in this test report refer only to the sample(s) tested, this test report cannot be reproduced, except in full, without prior written permission of the company. The report would be invalid without specific stamp of test institute and the signatures of approver. Prepared By: Waltek Testing Group (Foshan) Co., Ltd. Address: 1/F., Building 19, Sunlink Machinery City, Xingye 4 Road, Guanglong Industrial Park, Chihua Neighborhood Committee, Chencun, Shunde District, Foshan, Guangdong, China Tel:+86-757-23811398 Fax:+86-757-23811381 E-mail:[email protected] Tested by: Approved by: Roy Hong Danny Zhou Reference No.: WTF26F01009549W001 Page 2 of 46 Waltek Testing Group (Foshan) Co., Ltd. http://www.waltek.com.cn WT-510-201-12-A 1 Revision History Test Report No. Date of Issue Description Status WTF26F01009549W001 2026-03-10 Original Valid Reference No.: WTF26F01009549W001 Page 3 of 46 Waltek Testing Group (Foshan) Co., Ltd. http://www.waltek.com.cn WT-510-201-12-A 2 Contents Page 1 REVISION HISTORY ................................................................................................................................. 2 2 CONTENTS ............................................................................................................................................... 3 3 GENERAL INFORMATION ....................................................................................................................... 4 3.1 GENERAL DESCRIPTION OF E.U.T ................................................................................................... 4 3.2 TECHNICAL CHARACTERISTICS OF EUT ........................................................................................... 4 3.3 STANDARDS APPLICABLE FOR TESTING ............................................................................................ 4 3.4 TEST FACILITY ................................................................................................................................ 5 3.5 SUBCONTRACTED ........................................................................................................................... 5 3.6 ABNORMALITIES FROM STANDARD CONDITIONS ................................................................................ 5 4 EUT SETUP AND TEST MODE ................................................................................................................ 6 5 EQUIPMENT USED DURING TEST ......................................................................................................... 7 5.1 EQUIPMENT LIST ............................................................................................................................. 8 5.2 TEST SOFTWARE ............................................................................................................................ 8 5.3 SPECIAL ACCESSORIES AND AUXILIARY EQUIPMENT ......................................................................... 8 5.4 MEASUREMENT UNCERTAINTY ......................................................................................................... 8 6 SUMMARY OF TEST RESULT ................................................................................................................ 9 6.1 ANTENNA REQUIREMENT ............................................................................................................... 10 6.2 RADIATED SPURIOUS EMISSIONS ................................................................................................... 11 6.3 POWER SPECTRAL DENSITY .......................................................................................................... 21 6.4 DTS BANDWIDTH .......................................................................................................................... 25 6.5 RF OUTPUT POWER ...................................................................................................................... 29 6.6 OUT OF BAND EMISSIONS .............................................................................................................. 34 7 PHOTOGRAPHS TEST SETUP ............................................................................................................. 45 7.1 PHOTOGRAPHS - RADIATED EMISSION TEST SETUP ........................................................................ 45 8 PHOTOGRAPHS – EUT CONSTRUCTIONAL DETAILS ...................................................................... 46 Reference No.: WTF26F01009549W001 Page 4 of 46 Waltek Testing Group (Foshan) Co., Ltd. http://www.waltek.com.cn WT-510-201-12-A 3 General Information 3.1 General Description of E.U.T Product Name ............................... : Wireless Module Model No. ..................................... : WBR1-IPEX Model Description ........................ : --- Rating ............................................ : DC 3.0-3.6V Battery Capacity ........................... : --- Power Adapter .............................. : --- 3.2 Technical Characteristics of EUT Support Standards ....................... :…

Text truncated - open the document above for the full version.

Sushi TOWE Wireless Testing (Shenzhen) Co., Ltd. Report No.: TSED26030019501 Sushi TOWE Wireless Testing(Shenzhen) Co., Ltd. Email: [email protected] Tel.: +86-755-27212361 TOWE-QP-15-F05 Rev.1.2 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from TOWE. Antenna Passive Test Report Project No. : TSED260300195 Product Type : Wireless Module Test Mode : Free Space Date of Receipt : 2026/03/12 Date of Test : 2026/03/12 Issued Date : 2026/03/12 Test Sample : TSED260300195-M-01 Standard(s) : ANSI/IEEE Std 149-2008 Applicant : Chinabest Home Appliance Co., Ltd. Address : No.29, Fuqing 2 Road, Henglan, Zhongshan, Guangdong, China. Manufacturer : Chinabest Home Appliance Co., Ltd. Address : No.29, Fuqing 2 Road, Henglan, Zhongshan, Guangdong, China. TOWE. tested the above equipment in accordance with the requirements set forth in the above standards. The test results show that the equipment tested is capable of demonstrating compliance with the requirements as documented in this report. the results documented in this report apply only to the tested sample, under the conditions and modes of operation as described herein. It is the manufacturer's responsibility to assure that additional production units of the model are manufactured with identical electrical and mechanical components. All sample tested were in good operating condition throughout the entire test program. Measurement Uncertainties are published for informational purposes only and were not taken into account unless noted otherwise. without written approval of TOWE, the test report shall not be reproduced except in full. Lin Qilong Approved By: Fan Jiafu Reviewed By: Page 2 / 16 Report No.: TSED26030019501 Sushi TOWE Wireless Testing(Shenzhen) Co., Ltd. Email: [email protected] Tel.: +86-755-27212361 TOWE-QP-15-F05 Rev.1.2 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from TOWE. Table of Contents REVISION HISTORY ....................................................................................................... 3 1 . CERTIFICATE OF COMPLIANCE ............................................................................. 4 1.1 DESCRIPTION OF EUT AND TEST(S) PERFORMED ....................................................................... 4 1.2 LABORATORY ENVIRONMENT .......................................................................................................... 4 2 . MEASUREMENT SYSTEM INFORMATION .............................................................. 5 2.1 GENERAL INFORMATION .................................................................................................................. 5 2.2 LIST OF EQUIPMENT .......................................................................................................................... 7 2.3 MEASUREMENT UNCERTAINTY ....................................................................................................... 8 3.TEST RESULTS ........................................................................................................... 9 4. 2-D PATTERN PLOTS .............................................................................................. 10 5. 3-D PATTERN PLOTS .............................................................................................. 13 6. THE EUT AND TEST CONFIGURATION ................................................................. 15 APPENDIX A ANTENNA SPECIFICATION .................................................................. 16 Page 3 / 16 Report No.: TSED26030019501 Sushi TOWE Wireless Testing(Shenzhen) Co., Ltd. Email: [email protected] Tel.: +86-755-27212361 TOWE-QP-15-F05 Rev.1.2 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from TOWE. REVISION HISTORY Rev. Issue Date Description Revised by 01 2026/03/12 Original Fan Jiafu Page 4 / 16 Report No.: TSED26030019501 Sushi TOWE Wireless Testing(Shenzhen) Co., Ltd. Email: [email protected] Tel.: +86-755-27212361 TOWE-QP-15-F05 Rev.1.2 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from TOWE. 1. CERTIFICATE OF COMPLIANCE 1.1 DESCRIPTION OF EUT AND TEST(S) PERFORMED Manufacturer Chinabest Home Appliance Co., Ltd. Model WBR1-IPEX Serial Number(s) / ESN(s) / IMEI(s) N/A Hardware Version N/A Software Version N/A 1.2 LABORATORY ENVIRONMENT Temperature Min = 20°C , Max = 24°C Relative humidity Min = 30% , Max = 70% Shield effect 0.6 – 8.5G ＞100dB Ground resistance ＜0.5Ω Page 5 / 16 Report No.: TSED26030019501 Sushi TOWE Wireless Testing(Shenzhen) Co., Ltd. Email: [email protected] Tel.: +86-755-27212361 TOWE-QP-15-F05 Rev.1.2 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from TOWE. 2. MEASUREMENT SYSTEM INFORMATION 2.1 GENERAL INFORMATION Measurement Facility: ⚫ Measurement Chamber: ETS-Lindgren 3D fully anechoic chamber and its measuring system (AMS- 8923) ⚫ ETS-Lindgren EMCenter ⚫ Vector Network Analyzer: R&S ZNB8 Instruments View Page 6 / 16 Report No.: TSED26030019501 Sushi TOWE Wireless Testing(Shenzhen) Co., Ltd. Email: [email protected] Tel.: +86-755-27212361 TOWE-QP-15-F05 Rev.1.2 All rights reserved. Unless otherwise specified, no part of t…

Text truncated - open the document above for the full version.

Waltek Testing Group (Foshan) Co., Ltd. http://www.waltek.com.cn Page 1 of 33 WT-510-201-12-A TEST REPORT Reference No. .................... : WTF26F01009549W002 FCC ID ................................ : 2BUU5CH Applicant ..................…

Text truncated - open the document above for the full version.