2BUUM00ARTLSUARTLabel

VISEMO SA U.S. Agent Designation for Service of Process (Applicant and U.S. Agent are Separate Parties) TO: Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 ATT ENTION: FCC Certification – Section 2.911(d)(7) Information Designated U. S. Agent Company Name: United Consulting Technology Services Co., Ltd . FRN: 0033495714 Contact Name: Dav id Wu Street Address: 1 7800 CASTLETON ST STE 665 CITY OF INDUSTRY City/Province/Zip: CA 91748 Telephone No: (626) 217-4022 Email: [email protected] This letter is to confirm that we (“the Designated U.S . Agent) have accep ted the responsibility to act as the Designated U.S. Agent for Service of Process as required by section 47 CFR 2.911(d)(7) on behalf of th e Applicant noted below. U.S. Agent Signature: Date:April 15, 2026 Signed by ( Printed Name/Title): David Wu/ CEO The Applicant acknowledges that they must maintain an agent for no less than one year after terminating all marketing and importation OR the conclusion ofany Commission-related proceeding involving the equipment. The applicant further acknowledges their responsibility to inform the FCC whenever the Designated U.S. Agent information above changes. Applicant Company name: VISEMO SA Grantee Code: 2BUUM FRN: 0037983012 FCC ID: 2BUUM00ARTLSU Contact Name: Charles Bourbonnais Street Address: Route des Flumeaux 46 City/Province/Zip: Prilly, Vaud, Switzerland 1008 Telephone No: +41788961619 Email: [email protected] Applicant Signature: Date: April 15, 2026 Signed by (Printed Name/Title): Charles Bourbonnais, CEO

FCC COVERED LIST DECLARATION LETTER Page 1 of 1 Revision 1.0 SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Legal Business Name VISEMO S.A. Address Route des Flumeaux 46, 1008 Prilly, Switzerland FRN 0037983012 Grantee Code 2BUUM FCC ID: 2BUUM00ARTLSU Authorized Contact Name Charles Bourbonnais Contact Phone +41 78 896 1619 Contact Email [email protected] VISEMO S.A. (“the applicant”) certifies : - the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. - as of the date of the filing of the application, the applicant is not identified on the Covered list, established pursuant to §1.50002, as an entity producing “covered” equipment. - the software to be loaded prior to marketing of the equipment identified above is not “covered” software manufactured by any entity including predecessors, successors, parents, subsidiaries, affiliates or any entity which has rebranded or relabeled the software produced by the entity(ies) identified on the “Covered List”. - the device is not capable of storing or running software listed on the covered list and therefore is inherently compliant. NOTE: Justification/evidence explaining how compliance is met must accompany this letter Link to the Covered List: Covered List Applicant Signature: Date: February 6, 2026 Print Name: Charles Bourbonnais Title: CEO *NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database

Applicant Declaration QSF27-14-04 Rev 1.4 April 25, 2025 Page 1 of 1 Original Issue: Jan. 4, 2021 SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Legal Business Name VISEMO S.A. Address Route des Flumeaux 46, 1008 Prilly, Switzerland FRN 0037983012 Grantee Code 2BUUM FCC ID: 2BUUM00ARTLSU Authorized Contact Name Charles Bourbonnais Contact Phone +41 78 896 1619 Contact Email [email protected] I, the undersigned, certify that I am an authorized signatory for the Applicant and therefore declare; a) in accordance with 47CFR2.911(d), all of the statements herein and the exhibits attached hereto are true and correct to the best of my knowledge and belief. b) in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made in this application, the Applicant is responsible for: (1) labeling the equipment with the exact FCC ID as specified in this application, (2) compliance statement labeling pursuant to the applicable rules, (3) compliance of the equipment with the applicable technical rules, c) if the Applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC’s technical requirements. d) in accordance with 47 CFR 2.909 and KDB394321, the Applicant has read, understood and agrees to accept that they are the responsible party and agree to abide by their responsibilities as specified under 47 CFR 2.909 and KDB394321. e) in accordance with ISO 17065, FCC KDB641163, FCC KDB610077, KDB394321 and RSP-100, the Applicant has read, understood, accepts and agrees to abide by the post market surveillance requirements. (1) the Applicant understands, accepts and agrees that a sample may be requested for surveillance testing. (2) the Applicant shall make provisions to always have a production sample available upon request by SGS, FCC and/or ISED. (3) the Applicant shall, upon request by SGS, at the Applicant’s expense, provide a production sample of the requested product to SGS, FCC and/or ISED as instructed. The sample shall include all support devices, cables, software, accessories or other hardware or software required for evaluation, review, certification and audit surveillance of products certified by SGS. f) neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. §862 because of a conviction for possession or distribution of a controlled substance. See 47CFR 1.2002(b) for the definition of a “party” for these purposes. g) the Applicant has read, understood, accepts and agrees to abide by the SGS North America, Inc. terms and conditions as specified in the TCB Application Form 731 (QSF27-14-01). Link to CFRs: https://www.fcc.gov/wireless/bureau-divisions/technologies-systems-and-innovation-division/rules-regulations-title-47 Link to KDBs: https://apps.fcc.gov/oetcf/kdb/index.cfm Link to RSP-100: https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01130.html Link to the Covered List: Covered List Applicant Signature: Date: February 6, 2026 Print Name: Charles Bourbonnais Title: CEO *NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database

VISEMO S.A., Route des Flumeaux 46, 1008 Prilly, Switzerland https://www.visemo.ch/ 6 th February 2026 TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: 2BUUM00ARTLSU To whom it may concern: We, VISEMO, hereby authorize Parlam Zhan to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own. We, VISEMO, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Where our agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, Inc., still resides with VISEMO. This authorization is valid until further written notice from the applicant. Name (Printed): Charles Bourbonnais Title: CEO Signature: On behalf of Company: VISEMO SA Telephone: +41 78 896 1619

Date : 2026-04-17 To Whom It May Concern: DECLARATION OF WIRELESS MODULE AND TEST REPORTS We Nordic Semiconductor ASA hereby authorised company VISEMO SA to use our TEST REPORT of our model name: NRF9151, FCC ID: 2ANPO00NRF9151. The mentioned module NRF9151 in the said test report is for CELLULAR IOT MODULE module has been used in equipment model: ARTLabel,FCC ID: 2BUUM00ARTLSU. Thank you for your attention to this matter. Yours sincerely, Printed Name: Niko Balabanis Job Position: Certification Manager Telephone: +47 72898900 Email:[email protected]

To: SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia United States From: VISEMO S.A. Route des Flumeaux 46 1008, Prilly, Vaud Switzerland Regarding: Confidentiality Request regarding application for FCC ID: 2BUUM00ARTLSU LONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of the commission’s rules, the applicant hereby request confidential treatment of the documents listed below, associated with the certification application referenced above. Schematic(s) Block Diagrams Part List Operational Descriptions Tune up The documents above contain proprietary information not released to the public. Public disclosure of this information may prove harmful to the business of the applicant. SHORT TERM CONFIDENTIALITY Additionally, the applicant requests the following documents be held confidential until the device is marketed or 180 days from the grant date, whichever is less. If the device is marketed within 180 days of the Grant Date, the applicant will notify the TCB per FCC KDB 726920 D01 Confidentiality Request Procedures. External photo Internal Photos Setup photo User manual(s) Sincerely, Signature: Printed Name (on file with the FCC associated with the Grantee Code): Charles Bourbonnais Title : CEO Company Name: VISEMO SA

Page 1 of 2 Page 2 of 2 Label Location

Report No.: KSCR260200032302 Page: 1 of 13 CCSEM-TRF-001 Rev. 03 Dec 18, 2024 1 Cover Page RF Exposure Evaluation Report Application No.: KSCR2602000323AT FCC ID: 2BUUM00ARTLSU Applicant: VISEMO SA Address of Applicant: Route des Flumeaux 46, 1008 Prilly, Switzerland Manufacturer: VISEMO SA Address of Manufacturer: Route des Flumeaux 46, 1008 Prilly, Switzerland Factory: Hemar Group Address of Factory: Fendler 50, 5524 Nesselnbach, Switzerland Equipment Under Test (EUT): EUT Name: ARTLabel Model No.: ARTL-SU Trade Mark: ARTLabel Standard(s) : FCC Rules 47 CFR §2.1091 KDB 447498 D04 interim General RF Exposure Guidance v01 Date of Receipt: 2026-02-05 Date of Test: 2026-04-06 to 2026-04-10 Date of Issue: 2026-04-14 Test Result: Pass* * In the configuration tested, the EUT complied with the standards specified above. Report No.: KSCR260200032302 Page: 2 of 13 CCSEM-TRF-001 Rev. 03 Dec 18, 2024 Revision Record Version Description Date Remark 00 Original 2026-04-14 / Authorized for issue by: Tested By Tommie_Tang/Project Engineer Approved By Terry Hou /Reviewer Report No.: KSCR260200032302 Page: 3 of 13 CCSEM-TRF-001 Rev. 03 Dec 18, 2024 2 Contents Page 1 Cover Page ........................................................................................................................................ 1 2 Contents ............................................................................................................................................ 3 3 General Information .......................................................................................................................... 4 3.1 General Description of E.U.T. .................................................................................................... 4 3.2 Technical Specifications ............................................................................................................. 4 3.3 Separation Distance ................................................................................................................... 5 3.4 Test Location .............................................................................................................................. 6 3.5 Test Facility ................................................................................................................................ 6 4 RF Exposure Test Exemptions ........................................................................................................ 7 4.1 RF Exposure Test Exemptions for single RF sources ............................................................... 7 5 Measurement and Calculation ....................................................................................................... 12 5.1 Maximum transmit power ......................................................................................................... 12 5.2 RF Exposure Calculation ......................................................................................................... 13 Report No.: KSCR260200032302 Page: 4 of 13 CCSEM-TRF-001 Rev. 03 Dec 18, 2024 3 General Information 3.1 General Description of E.U.T. Power Supply: DC 3V by battery 3.2 Technical Specifications Operating Frequency: Band CAT-M1: LTE Band 2: 1850.7MHz – 1909.3MHz LTE Band 4: 1710.7MHz – 1754.3MHz LTE Band 5: 824.7MHz – 848.3MHz LTE Band 12: 699.7MHz – 715.3MHz LTE Band 13 779.5MHz – 784.5MHz LTE Band 25: 1850.7MHz – 1914.3MHz LTE Band 26: 814.7MHz – 848.3MHz LTE Band 66: 1710.7MHz – 1779.3MHz LTE Band 85: 700.5MHz – 713.5MHz NB-IoT: LTE Band 2: 1850.1MHz – 1909.9MHz LTE Band 4: 1710.1MHz – 1754.9MHz LTE Band 5: 824.1MHz – 848.9MHz LTE Band 12: 699.1MHz – 715.9MHz LTE Band 13 777.1MHz – 786.9MHz LTE Band 17: 704.1MHz – 715.9MHz LTE Band 25: 1850.1MHz – 1914.9MHz LTE Band 26: 814.2MHz – 848.8MHz LTE Band 66: 1710.1MHz – 1779.9MHz LTE Band 85: 698.1MHz – 715.9MHz LTE CAT-M1 Modulation Type: QPSK/16QAM LTE NB-IoT Modulation Type: BPSK/QPSK Antenna Type: PCB Antenna and Split Ring Resonator LTE CAT-M1 Antenna Gain: Band 2: 2.12dBi(Provided by manufacturer) Band 4: 2.12dBi(Provided by manufacturer) Band 5: 2.12dBi(Provided by manufacturer) Band 12: 2.12dBi(Provided by manufacturer) Band 13: 2.12dBi(Provided by manufacturer) Band 25: 2.12dBi(Provided by manufacturer) Band 26: 2.12dBi(Provided by manufacturer) Band 66: 2.12dBi(Provided by manufacturer) Band 85: 2.12dBi(Provided by manufacturer) Report No.: KSCR260200032302 Page: 5 of 13 CCSEM-TRF-001 Rev. 03 Dec 18, 2024 LTE NB-IoT Antenna Gain: Band 2: 2.12dBi(Provided by manufacturer) Band 4: 2.12dBi(Provided by manufacturer) Band 5: 2.12dBi(Provided by manufacturer) Band 12: 2.12dBi(Provided by manufacturer) Band 13: 2.12dBi(Provided by manufacturer) Band 17: 2.12dBi(Provided by manufacturer) Band 25: 2.12dBi(Provided by manufacturer) Band 26: 2.12dBi(Provided by manufacturer) Band 66: 2.12dBi(Provided by manufacturer) Band 85: 2.12dBi(Provided by manufacturer) 3.3 Separation Distance Separation distance between the antenna to person (R): ＞20cm Remark: This minimum test separation distance is determined by the smallest distance from the antenna and radiating structures or outer surface of the device, according to the host form factor, exposure conditions and platform requirements, to any part of the body or extremity of a user or bystander. R has been stated in user manual. Report No.: KSCR260200032302 Page: 6 of 13 CCSEM-TRF-001 Rev. 03 Dec 18, 2024 3.4 Test Location All tests were performed at: Compliance Certification Services (Kunshan) Inc. No.10 Weiye Rd, Innovation park, Eco&Tec, Development Zone, Kunshan City, Jiangsu, China. Tel: +86 512 5735 5888 Fax: +86 512 5737 0818 No tests were sub-contracted. Note: 1.SGS is not responsible for wrong test results due to incorrect information (e.g. max. clock frequency, highest internal frequency, antenna gain, cable loss, etc ) is provided by the applicant. (if applicable). 2.SGS is not responsible for the authenticity, integrity and the validity of the…

Text truncated - open the document above for the full version.

Report No.: KSCR260200032301 Page: 1 of 32 CCSEM-TRF-001 Rev. 03 Dec 18, 2024 TEST REPORT Application No.: KSCR2602000323AT FCC ID: 2BUUM00ARTLSU Applicant: VISEMO SA Address of Applicant: Route des Flumeaux 46, 1008 Prilly, Switzerland Manufacturer: VISEMO SA Address of Manufacturer: Factory: Address of Factory: Route des Flumeaux 46, 1008 Prilly, Switzerland Hemar Group Fendler 50, 5524 Nesselnbach, Switzerland Equipment Under Test (EUT): EUT Name: ARTLabel Model No.: ARTL-SU Trade Mark: ARTLabel Standard(s) : 47 CFR Part 2 47 CFR Part 22 47 CFR Part 24 47 CFR Part 27 47 CFR Part 90 Date of Receipt: 2026-02-05 Date of Test: 2026-04-06 to 2026-04-10 Date of Issue: 2026-04-14 Test Result: Pass* * In the configuration tested, the EUT complied with the standards specified above. Report No.: KSCR260200032301 Page: 2 of 32 CCSEM-TRF-001 Rev. 03 Dec 18, 2024 Revision Record Version Description Date Remark 00 Original 2026-04-14 / Authorized for issue by: Tested By Tommie_Tang/Project Engineer Approved By Terry Hou /Reviewer Report No.: KSCR260200032301 Page: 3 of 32 CCSEM-TRF-001 Rev. 03 Dec 18, 2024 2 Test Summary Radio Spectrum Matter Part Item Standard Method Requirement Result Field strength of spurious radiation 47 CFR Part 2; 47 CFR Part 22 subpart H; 47 CFR Part 24 subpart E; 47 CFR Part 27 subpart C; 47 CFR Part 90 subpart S ANSI C63.26, KDB 971168 D01 v03 §2.1051, §22.917, §24.238, §27.53(f), §27.53(g), §27.53(h), §90.691 Pass Note1: This host product using a certified module(FCC ID: 2ANPO00NRF9151). The host integrator declares that they have followed the integration instructions provided by the module manufacturer and ensures that the end product complies with the FCC requirements by a technical evaluation to include the FCC Rules and KDB Publication 996369. In this report, the testing is performed with the host product configured in typical operational modes to check the spurious emissions for compliance with all the applicable rules, other test data please refer to original module test report No. PSU-QSU2404090210RF01, PSU-QSU2404090210RF02, PSU-QSU2404090210RF03, PSU-QSU2404090210RF04, PSU-QSU2404090210RF05 Note2: Effective (Isotropic) Radiated Power Output Data is validated and tested in agreement with the original project, so it is a direct reference to the original project data. Only the Field strength of spurious radiation evaluated in this report, other test data please refer to original project data. Report No.: KSCR260200032301 Page: 4 of 32 CCSEM-TRF-001 Rev. 03 Dec 18, 2024 3 Contents Page 1 COVER PAGE ........................................................................................................................................... 1 2 Test Summary ......................................................................................................................................... 3 3 Contents ................................................................................................................................................... 4 4 General Information ................................................................................................................................ 5 4.1 Details of E.U.T. ............................................................................................................................... 5 4.2 Description of Support Units ............................................................................................................ 6 4.3 Measurement Uncertainty ................................................................................................................ 7 4.4 Test Location .................................................................................................................................... 8 4.5 Test Facility ...................................................................................................................................... 8 4.6 Deviation from Standards ................................................................................................................. 8 4.7 Abnormalities from Standard Conditions .......................................................................................... 8 5 Equipment List ........................................................................................................................................ 9 6 Radio Spectrum Matter Test Results .................................................................................................. 10 6.1 Field strength of spurious radiation ................................................................................................ 10 7 Test Setup Photo .................................................................................................................................. 32 8 EUT Constructional Details (EUT Photos) .......................................................................................... 32 Report No.: KSCR260200032301 Page: 5 of 32 CCSEM-TRF-001 Rev. 03 Dec 18, 2024 4 General Information 4.1 Details of E.U.T. Power supply: DC 3V by battery Operating Frequency: Band CAT-M1: LTE Band 2: 1850.7MHz – 1909.3MHz LTE Band 4: 1710.7MHz – 1754.3MHz LTE Band 5: 824.7MHz – 848.3MHz LTE Band 12: 699.7MHz – 715.3MHz LTE Band 13: 779.5MHz – 784.5MHz LTE Band 25: 1850.7MHz – 1914.3MHz LTE Band 26: 814.7MHz – 848.3MHz LTE Band 66: 1710.7MHz – 1779.3MHz LTE Band 85: 700.5MHz – 713.5MHz NB-IoT: LTE Band 2: 1850.1MHz – 1909.9MHz LTE Band 4: 1710.1MHz – 1754.9MHz LTE Band 5: 824.1MHz – 848.9MHz LTE Band 12: 699.1MHz – 715.9MHz LTE Band 13 777.1MHz – 786.9MHz LTE Band 17: 704.1MHz – 715.9MHz LTE Band 25: 1850.1MHz – 1914.9MHz LTE Band 26: 814.2MHz – 848.8MHz LTE Band 66: 1710.1MHz – 1779.9MHz LTE Band 85: 698.1MHz – 715.9MHz LTE CAT-M1 Modulation Type: QPSK/16QAM LTE NB-IoT Modulation Type: BPSK/QPSK Antenna Type: PCB Antenna and Split Ring Resonator LTE CAT-M1 Antenna Gain: Band 2: 2.12dBi(Provided by manufacturer) Band 4: 2.12dBi(Provided by manufacturer) Ba…

Text truncated - open the document above for the full version.

Huarui 7layers High Technology (Suzhou) Co., Ltd. Tower N, Innovation Center, 88 Zhuyi Road, High-tech District, Suzhou City, Anhui Province Tel: +86 (0557) 368 1008 Page 1 of 70 Test Report No.: PSU-QSU2404090210RF01 VARIANT FCC TEST REPORT (PART 22) Applicant: NORDIC SEMICONDUCTOR ASA Address: Otto Nielsens VeI 12, 7052 Trondheim, Norway Manufacturer or Supplier: NORDIC SEMICONDUCTOR ASA Address: Otto Nielsens VeI 12, 7052 Trondheim, Norway Product: Cellular IoT module Brand Name: nRF91 Model Name: nRF9151 FCC ID 2ANPO00NRF9151 Date of tests Apr. 12, 2024 ~ Jun. 14, 2024 The tests have been carried out according to the requirements of the following standard: FCC PART 22, Subpart H FCC Part 2 ANSI/TIA/EIA-603-D ANSI C63.26-2015 ANSI/TIA/EIA-603-E CONCLUSION: The submitted sample was found to COMPLY with the test requirement Prepared by Hanwen Xu Engineer / Mobile Department Approved by Peibo Sun Manager / Mobile Department Date: Jul. 02, 2024 Date: Jul. 02, 2024 This report is governed by, and incorporates by reference, the Conditions of Testing as posted at the date of issuance of this report at http://www.bureauveritas.com/home/about-us/our-business/cps/about-us/terms-conditions/ and is intended for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. Measurement uncertainty is only provided upon request for accredited tests. Statements of conformity are based on simple acceptance criteria without taking measurement uncertainty into account, unless otherwise requested in writing. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence or if you require measurement uncertainty; provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Huarui 7layers High Technology (Suzhou) Co., Ltd. Tower N, Innovation Center, 88 Zhuyi Road, High-tech District, Suzhou City, Anhui Province Tel: +86 (0557) 368 1008 Page 2 of 70 Test Report No.: PSU-QSU2404090210RF01 TABLE OF CONTENTS RELEASE CONTROL RECORD ............................................................................................................... 4 1 SUMMARY OF TEST RESULTS ............................................................................................................. 5 1.1 MEASUREMENT UNCERTAINTY ............................................................................................... 7 1.2 TEST SITE AND INSTRUMENTS ................................................................................................ 8 2 GENERAL INFORMATION ................................................................................................................... 10 2.1 GENERAL DESCRIPTION OF EUT ........................................................................................... 10 2.2 CONFIGURATION OF SYSTEM UNDER TEST ........................................................................ 12 2.3 DESCRIPTION OF SUPPORT UNITS ....................................................................................... 13 2.4 TEST ITEM AND TEST CONFIGURATION................................................................................ 13 2.5 EUT OPERATING CONDITIONS ............................................................................................... 16 2.6 GENERAL DESCRIPTION OF APPLIED STANDARDS ............................................................ 17 3 TEST TYPES AND RESULTS ............................................................................................................... 18 3.1 OUTPUT POWER MEASUREMENT ......................................................................................... 18 3.1.1 LIMITS OF OUTPUT POWER MEASUREMENT ............................................................... 18 3.1.2 TEST PROCEDURES ........................................................................................................ 18 3.1.3 TEST SETUP ...................................................................................................................... 19 3.1.4 TEST RESULTS ................................................................................................................. 19 3.2 FREQUENCY STABILITY MEASUREMENT ............................................................................. 32 3.2.1 LIMITS OF FREQUENCY STABILIITY MEASUREMENT .................................................. 32 3.2.2 TEST PROCEDURE ........................................................................................................... 32 3.2.3 TEST SETUP ...................................................................................................................... 32 3.2.4 TEST RESULTS ................................................................................................................. 33 3.3 OCCUPIED BANDWIDTH MEASUREMENT ............................................................................ 34 3.3.1 LIMITS OF OCCUPIED BANDWIDTH MEASUREMENT .................................................. 34 3.3.2 TEST SETUP ...................................................................................................................... 34 3.3.3 TEST PROCEDURES ........…

Text truncated - open the document above for the full version.

Huarui 7layers High Technology (Suzhou) Co., Ltd. Tower N, Innovation Center, 88 Zhuyi Road, High-tech District, Suzhou City, Anhui Province Tel: +86 (0557) 368 1008 Page 1 of 74 Test Report No.: W7L-240204W001RF02 VARIANT FCC TEST REPORT (PART 24) Applicant: NORDIC SEMICONDUCTOR ASA Address: Otto Nielsens VeI 12, 7052 Trondheim, Norway Manufacturer or Supplier: NORDIC SEMICONDUCTOR ASA Address: Otto Nielsens VeI 12, 7052 Trondheim, Norway Product: Cellular IoT module Brand Name: nRF91 Model Name: nRF9151 FCC ID 2ANPO00NRF9151 Date of tests Apr. 12, 2024 ~ Jun. 14, 2024 The tests have been carried out according to the requirements of the following standard: FCC PART 24, Subpart E FCC PART 2 ANSI/TIA/EIA-603-D ANSI/TIA/EIA-603-E ANSI C63.26-2015 CONCLUSION: The submitted sample was found to COMPLY with the test requirement Prepared by Hanwen Xu Engineer / Mobile Department Approved by Peibo Sun Manager / Mobile Department Date: Jul. 02, 2024 Date: Jul. 02, 2024 This report is governed by, and incorporates by reference, the Conditions of Testing as posted at the date of issuance of this report at http://www.bureauveritas.com/home/about-us/our-business/cps/about-us/terms-conditions/ and is intended for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. Measurement uncertainty is only provided upon request for accredited tests. Statements of conformity are based on simple acceptance criteria without taking measurement uncertainty into account, unless otherwise requested in writing. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence or if you require measurement uncertainty; provided, however, that…

Text truncated - open the document above for the full version.