2BUW5-456BTRemote Control for Bicycle Lights

English Installation and Operating Instructions for the Blucon Bluetooth Button Type No. 456BT Table of Contents 1. General Information 2. Package Contents 3. Safety Information 4. Legal Information 5. Technical Specifications 6. Installation 6.1. General Installation Instructions 6.2. Installation and Connection of the Blucon Bluetooth Button 6.3. Battery Replacement for the Blucon Bluetooth Button 7. Operation and Functions of the Blucon Bluetooth Button 8. Functions & App 9. Additional Notes 10. Liability Installation and Operating Instructions for the busch+müller Blucon Bluetooth Button. 1. General Information These instructions are intended for users with knowledge and experience in assembling and installing bicycle components. Special tools are required for this. If you do not know how to assemble or install bicycle components or do not have the appropriate tools, please contact a bicycle specialist to have this work performed properly. If the components are assembled or installed improperly, it can lead to a fall resulting in serious injury. Please read and follow these instructions carefully and keep them for future reference. busch+müller offers a diverse product portfolio of bicycle lights. Not every light is suitable for every application or for riding on every type of surface. There are limitations here. If you are unsure which type of bicycle light you need, you can either call our service hotline at +49 2354 915-7111, send an email inquiry to [email protected], or ask a bicycle dealer near you for advice. 2. Package Contents Bluetooth button Blucon | Optional button holder and rubber ring | User manual | CR2032 battery 3. Safety Information This manual uses signal words to indicate potential hazards or important information. The meanings of these signal words are listed below: [WARNING] Describes a hazardous situation that could result in death or serious injury if not avoided. [CAUTION] Refers to information that is important but does not indicate a hazard (e.g., information regarding property damage). The [!] symbol indicates other useful information about your new bicycle component. 4. Legal Information Before riding your bicycle on public roads, you must familiarize yourself with the applicable laws and regulations of your country and local ordinances and always comply with them. In Germany, you can find these in the Road Traffic Regulations; outside Germany, in other sources, depending on your location. In Germany, the following is required: If the Blucon Bluetooth button [2] is used to control a turn signal or to operate a high-beam function, it must be mounted in such a way that the hand does not have to be removed from the handlebars to operate it. Additionally, in Germany, when used in conjunction with a high-beam function, the high beams must always be able to be turned off with a brief press of the high-beam button. 5. Technical Specifications Dimensions of the Blucon Bluetooth Button: Height: 205 mm | Length: 321 mm | Width: 503 mm | Weight: 27 g Battery: Button cell (CR2032) 6. Installation 6.1. General Installation Instructions [CAUTION] Never mount brackets on tapered components! Tighten screws only enough to prevent components from shifting on their own. This is particularly important when riding on uneven terrain. 6.2. Installation and Connection of the Blucon Bluetooth Button Securely mount the Bluetooth button [2] on the handlebars using the included button holder [2.1] or the supplied rubber ring, ensuring it is easily accessible so that it can be operated without taking your hand off the handlebars. Mounting with the button holder [2.1] is possible on handlebars with a diameter of 22.2 mm. Mounting with the rubber ring is possible on handlebars with a diameter of 22 to 32 mm. Mounting with button holder [2.1]: [!] To ensure the Bluetooth button [2] adapts to the specific layout of the cockpit, it can be adjusted or rotated to always guarantee easy access. To do this, loosen the 2 mm Allen screw [2.3] on the button holder [2.1] (TX 10), rotate the Bluetooth button so that the locking tab [2.2] is positioned in front of the opening of the button holder, and slide the Bluetooth button out of the button holder. To do this, the button holder must be opened at least far enough so that the locking tab can be pushed through the button holder. Now the Bluetooth button can be rotated 180° and reinserted into the button holder. Before tightening the clamping screw again, ensure that the locking tab is positioned behind the button holder to prevent the Bluetooth button from slipping out of the button holder. As soon as the battery in the Bluetooth button [2] drops below 10% capacity, an LED in the Bluetooth button [2] flashes red and the high beam function can no longer be activated. Replace the battery immediately. See “Replacing the Bluetooth Button Battery” If the Bluetooth button [2] needs to be replaced or a button does not connect automatically, the button information stored in the headlight must be deleted. The easiest way to do this is via the app in the “Button Configuration Window” menu using the “Disconnect Button from Headlight” command. See also “8.5. busch+müller App”. If the Bluetooth button [2] is not connected to a headlight for 30 seconds, it enters power-saving mode. Pressing a button activates the Bluetooth button [2] and causes it to attempt to connect to a headlight. This first press of the button to connect does not yet trigger any function on the headlight. [!] To ensure the best possible Bluetooth connection, the headlight and Bluetooth button [2] should be mounted so that as few components as possible are located between the two devices. [!] If the connection between the headlight and the Bluetooth button [2] is lost, any high-beam function that may be active will automatically turn off. 6.3. Battery Replacement for the Blucon Bluetooth Button If the battery in the Bluetooth button [2] needs to be replaced, the Bluetooth button can be detac…

Text truncated - open the document above for the full version.

Busch & Müller KG Auf dem Bamberg 1 58540 Meinerzhagen GERMANY Federal Communication Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA 8 th April 2026 Attestation Statement according to 2.911(d)(5)(i) and 2.911(d)(5)(ii) FCC ID: 2BUW5-456BT TO WHOM IT MAY CONCERN: Hereby, we certify that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving equipment authorization pursuant to Section 2.903 of the FCC Rules. Furthermore, we certify that, as of the date of filing the application, the applicant is not identified on the Covered List (either as a specifically named entity or as any of its subsidiaries or affiliates) as an entity producing “covered” equipment. Sincerely, _______________ (signature) Busch & Müller KG FRN: 0036231942 Auf dem Bamberg 1 58540 Meinerzhagen GERMANY Vito Huhn +49 2354 9158810 [email protected]

iCertifi Control Number - IC2026ASOP12283 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 06/04/2026 Ref: Attestation Statement Part 2.911(d)(7) Filing FCC ID: 2BUW5-456BT Busch & Müller KG certifies that, as of the dates of this application, Americas Compliance Consulting LLC dba iCertifi is our designated U.S. agent for service of process for the above referenced FCC ID. Manufacturer accepts to maintain an agent for no less than two year after the grantee has terminated all marketing and importation or the conclusion of any commission-related proceeding involving the equipment. iCertifi accepts, as of the date of the filing of the application, the obligation of the designated U.S. agent for service process for the above referenced FCC ID. Designated U.S. Agent Information: Name: Americas Compliance Consulting LLC dba iCertifi FCC FRN: 0033399411 Address: 5809 US-2, Suite B, Albeni Plaza Priest River, Idaho 83856, United States Contact Person: Paul Preston Tel: +1 (866) 885-4575 Email: [email protected] Sincerely, Busch & Müller KGAmericas Compliance Consulting LLC dba iCertifi FRN: 0036231942FRN: 0033399411 Vito HuhnPaul Preston [email protected]@icertifi.com +49 2354 9158810+1 (866) 885-4575 Signature: Signature:

CONFIDENTIALITY REQUEST for Certification Service in USA Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 8 th April 2026 TO WHOM IT MAY CONCERN Pursuant to Paragraphs §0.457 and 0.459 of the Commission’s Rules (47 C.F.R.) and Section §552(b) (4) of the Freedom of Information Act, we requests confidentiality for the following products: FCC ID: 2BUW5-456BT Model name: Blucon 456BT For the product stated above, we request that the following information be held confidential; Exhibits Long-Term Confidentiality Short-Term Confidentiality External Photos Internal Photos Block Diagram Schematics Test Setup Photos User’s Manual Parts List Tune Up Operational Description The long-term confidentiality exhibits contain our trade secrets and proprietary information that could be of benefit to our competitors. The short-term confidentiality on the basis of ensuring that business sensitive information remains confidential until the actual marketing of our new device, which is planned for 5 th October 2026. If you have any questions, please feel free to contact me at the address shown below. Sincerely, Vito Huhn (Signed) Name / Title: Vito Huhn Company: Busch & Müller KG Address: Auf dem Bamberg 1, 58540 Meinerzhagen, Germany Phone: 0049 23549158810 Fax: 0049 23549157000 E-Mail: [email protected]

FCC/ISED Label Info for Blucon 456BT: Labels will be located on the inside of the battery cap.

Exemption letter No. 1-8898-24-01-11_TR1-R01 June 25, 2026 Applicant Busch & Müller KG Product Remote Control Model Blucon 456BT FCC ID 2BUW5-456BT Tested Technology Bluetooth LE Test Standard(s) Interim procedure KDB 447498 D04 Verdict Exemption fulfilled The test results relate only to devices specified in this document This test report is electronically signed and valid without handwritten signature. Public keys for verification of the electronic signatures can be requested at the testing laboratory. authorized by Timo Franke created by Martin Nunier Lab ManagerCoordinator Area Radio LabsRadio Labs cetecom advanced GmbHDocument No. 1-8898-24-01-11_TR1-R01 Untertuerkheimer Str. 6-10, 66117 SaarbrueckenPage 2of 5 Table of content 1Related cetecom advanced documents .............................................................................................................. 3 2Document history .................................................................................................................................................. 3 3Test laboratory ...................................................................................................................................................... 3 4Client and test sample information ...................................................................................................................... 3 5Measurement details ............................................................................................................................................ 4 cetecom advanced GmbHDocument No. 1-8898-24-01-11_TR1-R01 Untertuerkheimer Str. 6-10, 66117 SaarbrueckenPage 3of 5 1Related cetecom advanced documents Document Contents Reference Description Total Pages -- -- -- -- 2Document history Release No. Applied changes Date of release R01Initial releaseJune 25, 2026 3Test laboratory cetecom advanced GmbH Untertuerkheimer Str. 6-10 66117 Saarbruecken Germany ☐ Saarbruecken lab ☒ Essen lab Untertuerkheimer Str. 6-10 66117 Saarbruecken Germany Im Teelbruch 116 45219 Essen Germany 4Client and test sample information Customer Product Model Type HW Status SW status Busch & Müller KGRemote ControlBlucon 456BT--V061.0.0 cetecom advanced GmbHDocument No. 1-8898-24-01-11_TR1-R01 Untertuerkheimer Str. 6-10, 66117 SaarbrueckenPage 4of 5 5Measurement details According to Interim procedure KDB 447498 D04 SAR testing can be exempted if the following exclusion threshold is met: SAR-based Exemption According 1.1307(b)(3)(i)(B) Option B – Available maximum time-averaged power or effective radiated power (ERP) at frequencies above 300 kHz and below 6 GHz, but with distances from 0.5 cm to 40 cm may be exempted as follows: cetecom advanced GmbHDocument No. 1-8898-24-01-11_TR1-R01 Untertuerkheimer Str. 6-10, 66117 SaarbrueckenPage 5of 5 Power Calculation Power calculation based on external document “Operational Description_Blucon456BT” provided by customer. The user manual must list the given usage position. – END OF DOCUMENT – BandTechnologyFrequency Distance = d d ≥ 0.5 cm and d ≤ 40 cm fulfilled Maximum Rated Conducted Output Power Maximum Tolerance Minimum Path Loss to Antenna Maximum Antenna Gain Duty CycleEIRPERP ERP Threshold ERP SAR Exemption fulfilled (MHz)(cm)(dBm)(dB)(dB)(dBi)(%)(dBm)(dBm)(mW)(mW) 2402.01.0yes4.02.00.0-3.41002.60.5110yes 2441.01.0yes4.02.00.0-3.71002.30.2110yes 2480.01.0yes4.02.00.0-5.61000.4-1.8110yes Exemption acc. Formula of § 1.1307(b)(3)(i)(B)—SINGLE RF SOURCES SUBJECT TO ROUTINE ENVIRONMENTAL EVALUATION 2.4 GHzBluetooth LE

Antenna Information for Blucon 456BT Antenna Type: The equipment under test (EUT) uses an integrated PCB trace antenna. Antenna Gain: The maximum antenna gain is -3.4 dBi. Antenna Location: The antenna is located on the main printed circuit board at one corner auf the PCB. Antenna Configuration: The antenna is permanently integrated into the device and is not accessible to the end user. It cannot be removed or replaced. Number of Antennas: The EUT contains a single antenna. Frequency Range: The antenna is designed to operate within the 2402 MHz to 2480 MHz frequency band. Compliance Statement: The antenna is fixed and does not allow user modification, ensuring compliance with applicable regulatory requirements.

Antenna Performance Test Report 1-2921-26-01-02_TR1-R01 Number of pages: 17 Date of Report: 2026-Jun-26 Testing company: cetecom advanced GmbH Untertuerkheimer Str. 6-10 66117 Saarbruecken Germany Customer: Busch & Müller KG Product: Remote Control Model: Blucon 456BT Frequency Range: 2402 MHz, 2440 MHz, 2480 MHz Test Specification: CTIA Test Plan for Wireless Device Over the Air Performance, Method of Measurement for Radiated RF Power and Receiver Performance. [1] Signatures: Timo Franke Martin Nunier Authorization of Test Report Test Execution and Author of Report Antenna Performance Test Report 1-2921-26-01-02_TR1-R01 2 / 17 Table of Contents 1General information ............................................................................................................................................... 3 1.1Disclaimer and Notes ....................................................................................................................................... 3 1.2Summary of Test Results ................................................................................................................................. 3 2Administrative Data ............................................................................................................................................... 4 2.1Identification of Entity Providing the Service .................................................................................................. 4 2.2General Limits for Environmental Conditions ................................................................................................. 4 2.3Organizational Items ........................................................................................................................................ 4 2.4Customer Details .............................................................................................................................................. 4 2.5EUT: Type, S/N etc. and short descriptions used in this test report .............................................................. 5 3Test Set Up and Method ........................................................................................................................................ 6 3.1Total Radiated Power (TRP) Test .................................................................................................................... 6 4Equipment lists .................................................................................................................................................... 17 4.1Measurement Uncertainty .............................................................................................................................. 17 5References ........................................................................................................................................................... 17 6Versions of test reports (change history) ........................................................................................................... 17 Table of Annex Annex No. Contents Reference Description Total Pages Annex 1 EUT and Test set-up photographs 1-2921-26-01-02_TR1-A101-R01 4 The listed attachments are separate documents. Antenna Performance Test Report 1-2921-26-01-02_TR1-R01 3 / 17 1General information 1.1Disclaimer and Notes The test results of this test report relate exclusively to the test item specified in this test report. cetecom advanced GmbH does not assume responsibility for any conclusions and generalizations drawn from the test results with regard to other specimens or samples of the type of the equipment represented by the test item. The test report may only be reproduced or published in full. Reproduction or publication of extracts from the report requires the prior written approval of cetecom advanced GmbH. The testing service provided by cetecom advanced GmbH has been rendered under the current "General Terms and Conditions for cetecom advanced GmbH". cetecom advanced GmbH will not be liable for any loss or damage resulting from false, inaccurate, inappropriate or incomplete product information provided by the customer. Ander no circumstances does the cetecom advanced GmbH test report include any endorsement or warranty regarding the functionality, quality or performance of any other product or service provided. Ander no circumstances does the cetecom advanced GmbH test report include or imply any product or service warranties from cetecom advanced GmbH, including, without limitation, any implied warranties of merchantability, fitness for purpose, or non-infringement, all of which are expressly disclaimed by cetecom advanced GmbH. All rights and remedies regarding vendor’s products and services for which cetecom advanced GmbH has prepared this test report shall be provided by the party offering such products or services and not by cetecom advanced GmbH. In no case this test report can be considered as a Letter of Approval. This test report is electronically signed and valid without handwritten signature. For verification of the electronic signatures, the public keys can be requested at the testing laboratory. The documentation of the testing performed on the tested devices is archived for 10 years at cetecom advanced GmbH. 1.2Summary of Test Results As summary in the table below are stated worst case values for selected frequency bands. The term worst case means applicable maximum or minimum values in respect to device certification, such as e.g. the maximum gain per frequency band. Frequency [MHz] Maximum Gain [dBi] 2402 -3.4 2440 -3.7 2480 -5.6 Tab 1: Data Summary Remark: Measured peak realized gain with correction of conducted power. Antenna Performance Test Report 1-2921-26-01-02_TR1-R01 4 / 17 2Administrative Data 2.1Identification of Entity Providing the Service Company address: cetecom advanced GmbH Untertuerkheimer Str. 6-10 66117 Saarbruecken Germany Internet site: cetecomadvanced.com Accreditation scope: DAkkS Webpag…

Text truncated - open the document above for the full version.

Test Report 1-8898-24-01-05_TR1-R05 Number of pages: 35 Date of Report: 2026-Jul-22 Testing company: cetecom advanced GmbH Untertuerkheimer Str. 6-10 66117 Saarbruecken GERMANY Applicant: Busch & Müller KG Product: Remote Control Model: Blucon 456BT FCC ID: 2BUW5-456BT IC: 35329-456BT PMN 456BT HVIN FVIN V06 1.0.0 Testing has been carried out in accordance with: FCC Regulations Title 47 CFR, Chapter I, Subchapter A, Part 15 Subpart C Intentional Radiators § 15.247 Operation within the bands 902-928 MHz, 2400-2483.5 MHz, and 5725-5850 MHz ISED-Regulations Radio Standards Specification RSS-Gen, Issue 5 General Requirements for Compliance of Radio Apparatus RSS-247, Issue 4 Digital Transmission Systems (DTSs), Frequency Hopping Systems (FHSs) and Licence-Exempt Local Area Network (LE-LAN) Device Tested Technology: BLE Test Results: ☒ The EUT complies with the requirements in respect of all parameters subject to the test. The test results relate only to devices specified in this document The current version of Test Report 1-8898-24-01-05_TR1-R05 replaces the test report 1-8898-24-01-05_TR1-R04 dated 2026-Jul-21. The replaced test report is herewith invalid. Signatures: Martin Nunier Salih Öztan Coordinator Area Lab Manager Authorization of test report Responsible of test report Test Report 1-8898-24-01-05_TR1-R05 1-8898-24-01-05_TR1-R05 2 / 35 Table of Contents Table of Annex .................................................................................................................................................................................. 3 1General information ................................................................................................................................................................ 4 1.1Disclaimer and Notes ......................................................................................................................................................... 4 1.2Attestation ......................................................................................................................................................................... 4 1.3Summary of Test Results ................................................................................................................................................... 5 1.4Summary of Test Methods ................................................................................................................................................ 6 2Administrative Data ................................................................................................................................................................. 7 2.1Identification of the Testing Laboratory ............................................................................................................................ 7 2.2General limits for environmental conditions ..................................................................................................................... 7 2.3Test Laboratories sub-contracted ...................................................................................................................................... 7 2.4Organizational Items ......................................................................................................................................................... 7 2.5Applicant’s details ............................................................................................................................................................. 7 2.6Manufacturer’s details ...................................................................................................................................................... 7 2.7Equipment under Test (EUT) ............................................................................................................................................. 8 2.8Untested Variant (VAR) ..................................................................................................................................................... 8 2.9Auxiliary Equipment (AE) ................................................................................................................................................... 8 2.10Connected cables (CAB)..................................................................................................................................................... 8 2.11Software (SW).................................................................................................................................................................... 8 2.12EUT set-ups ........................................................................................................................................................................ 9 2.13EUT operation modes ........................................................................................................................................................ 9 3Equipment under test (EUT) .................................................................................................................................................. 10 3.1General Data of Main EUT as Declared by Applicant ....................................................................................................... 10 3.2Detailed Technical data of Main EUT as Declared by Applicant ...................................................................................... 10 3.3Modifications on Test sample ......................................................................................................................................... 10 4Measurements....................................................................................................................................................................... 11 4.1Duty-Cycle ...................................................................................................................................................................…

Text truncated - open the document above for the full version.

Conducted test results No.1-8898-24-01-05_TR1-A201-R01 May 14, 2025 Test Standard(s)FCC 15.247 - NI FCC 15.247, ISED RSS247 - NI This document is electronically signed and valid without handwritten signature. Public keys for verification of the electronic signatures can be requested at the testing laboratory. Authorized Salih Öztan Lab Manager Radio Labs cetecom advanced GmbH Untertürkheimer Str. 6-10, 66117 Saarbrücken Document No. 1-8898-24-01-05_TR1-A201-R01 Release 1 - Page 1 of 140 Table of Content FCC 15.247 # Maximum peak conducted output power DTS ~ BT LE 1 Msps3 FCC 15.247 # Bandwidth 6dB DTS ~ BT LE 1 Msps7 FCC 15.247 # Peak psd DTS ~ BT LE 1 Msps10 FCC 15.247, ISED RSS247 # Bandwidth 99PCT and 20dB ~ BT LE 1 Msps13 FCC 15.247 # TX spurious conducted 20dBc ~ BT LE 1 Msps18 FCC 15.247 # Restricted band edge conducted peak DTS video avg (eirp) ~ BT LE 1 Msps22 FCC 15.247 # Maximum peak conducted output power DTS ~ BT LE 1 Msps26 FCC 15.247 # Bandwidth 6dB DTS ~ BT LE 1 Msps30 FCC 15.247 # Peak psd DTS ~ BT LE 1 Msps33 FCC 15.247, ISED RSS247 # Bandwidth 99PCT and 20dB ~ BT LE 1 Msps36 FCC 15.247 # TX spurious conducted 20dBc ~ BT LE 1 Msps41 FCC 15.247 # Restricted band edge conducted peak DTS video avg (eirp) ~ BT LE 1 Msps45 FCC 15.247 # Maximum peak conducted output power DTS ~ BT LE 1 Msps49 FCC 15.247 # Bandwidth 6dB DTS ~ BT LE 1 Msps53 FCC 15.247 # Peak psd DTS ~ BT LE 1 Msps56 FCC 15.247, ISED RSS247 # Bandwidth 99PCT and 20dB ~ BT LE 1 Msps59 FCC 15.247 # TX spurious conducted 20dBc ~ BT LE 1 Msps64 FCC 15.247 # Restricted band edge conducted peak DTS video avg (eirp) ~ BT LE 1 Msps68 FCC 15.247 # Maximum peak conducted output power DTS ~ BT LE 2 Msps72 FCC 15.247 # Bandwidth 6dB DTS ~ BT LE 2 Msps76 FCC 15.247 # Peak psd DTS ~ BT LE 2 Msps79 FCC 15.247, ISED RSS247 # Bandwidth 99PCT and 20dB ~ BT LE 2 Msps82 FCC 15.247 # TX spurious conducted 20dBc ~ BT LE 2 Msps87 FCC 15.247 # Restricted band edge conducted peak DTS video avg (eirp) ~ BT LE 2 Msps91 FCC 15.247 # Maximum peak conducted output power DTS ~ BT LE 2 Msps95 FCC 15.247 # Bandwidth 6dB DTS ~ BT LE 2 Msps99 FCC 15.247 # Peak psd DTS ~ BT LE 2 Msps102 FCC 15.247, ISED RSS247 # Bandwidth 99PCT and 20dB ~ BT LE 2 Msps105 FCC 15.247 # TX spurious conducted 20dBc ~ BT LE 2 Msps110 FCC 15.247 # Restricted band edge conducted peak DTS video avg (eirp) ~ BT LE 2 Msps114 FCC 15.247 # Maximum peak conducted output power DTS ~ BT LE 2 Msps118 FCC 15.247 # Bandwidth 6dB DTS ~ BT LE 2 Msps122 FCC 15.247 # Peak psd DTS ~ BT LE 2 Msps125 FCC 15.247, ISED RSS247 # Bandwidth 99PCT and 20dB ~ BT LE 2 Msps128 FCC 15.247 # TX spurious conducted 20dBc ~ BT LE 2 Msps133 FCC 15.247 # Restricted band edge conducted peak DTS video avg (eirp) ~ BT LE 2 Msps137 cetecom advanced GmbH Untertürkheimer Str. 6-10, 66117 Saarbrücken Document No. 1-8898-24-01-05_TR1-A201-R01 Release 1 - Page 2 of 140 FCC 15.247 # Maximum peak conducted output power DTS ~ BT LE 1 Msps References TC start14.05.2025 09:55:46 Ambit temp (test rack) [°C] | humidity [rel%] not enabled | not enabled System version5.2.0.0 Standard | Version FCC 15.247 | NI MethodDTS: KDB 558074 D01 V05 - Chapter 8.3.1.1 RBW ≥ DTS Bandwidth DescriptionFCC 15.247 Maximum peak output power conducted DTS - BT LE 1 Msps Information EUT Common Settings BT Low Energy Intermodulation value N 3 Image freq. Low | Mid | High [MHz] 0 | 0 | 0 Power class2 1 Mbps supported True | TXpayload 255 | RXpayload 255 2 Mbps supported True | TXpayload 255 | RXpayload 255 Longrange S8 supported False | TXpayload 255 | RXpayload 255 Longrange S2 supportedFalse | TXpayload 255 | RXpayload 255 Signaling settings None | HCI | 1 | 2400 | None | S1 | None | On Signaling RF settings RF1com | 0 | 0 | On | User interaction Yes Equipment Signal analyzer,Rohde&Schwarz,FSV3030,1330.5000K30/101247,1.90 Switch matrix,cetecom advanced GmbH,USM,D001,1.0.0 Test Parameter Technology to testBT LE 1 Msps EUT portEUT1 Temperaturenom Voltagenom Frequency low to …

Text truncated - open the document above for the full version.