2BUWNKCU3908089219Telemetry Unit for forklift trucks

Federal Communication Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 03/23/2026 Attestation Statement according to 2.911(d)(5)(i) and 2.911(d)(5)(ii) FCC ID: 2BUWNKCU3908089219 TO WHOM IT MAY CONCERN: Hereby we certify that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Further we certify that, as of the date of the filing of the application, Comnovo GmbH is not identified on the Covered List as an entity producing “covered” equipment. Sincerely, Volker Koester, Technical Director Comnovo GmbH, Robert-Schuman-Str. 6 44263 Dortmund, Germany +49 231 39599342 Volker Köster Technical Director COMNOVO GMBH Robert-Schuman-Str. 6 44263 Dortmund Germany

V02072023 Federal Communications Commission Date: 03/24/2026 Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Ref: Attestation Statement Part 2.911(d)(7) Filing FCC ID:2BUWNKCU3908089219 Grantee FRN: 0038031605 Comnovo GmbH certifies that, as of the dates of this application, Americas Compliance Consulting LLC dba iCertifi “iCertifi” is our designated U.S. agent for service of process for the above referenced FCC ID. Comnovo GmbH accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any commission-related proceeding involving the equipment. iCertifi accepts, as of the date of the filing of the application, the obligation of the designated U.S. agent for service process for the above referenced FCC ID. Designated U.S. Agent Information: Name: Americas Compliance consulting, LLC dba iCertifi FCC FRN: 0033399411 Address: 1001 SW Disk Drive, Suite 250, Bend, Oregon 97702 Contact Person: Paul Preston Tel: 866-885-4575 Email: [email protected] Comnovo GmbH Americas Compliance Consulting LLC dba iCertifi Volker Köster Paul Preston COMNOVO GMBH Robert-Schuman- Str. 6 44263 Dortmund Germany

Document Version 1.1 2020-10-30 LONG-TERM CONFIDENTIALITY REQUEST for Certification Service in the USA Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 TO WHOM IT M AY CONCERN Pursuant to Paragraphs §0.457 and 0.459 of the Commission’s Rules (47 C.F.R.) and Section §552(b)(4) of the Freedom of Information Act, we request Long-Term Confidentiality for the following product: For the product stated above, we request Long-Term Confidentiality for exhibits which contain Block Diagram, Operational Description, Parts List/Tune Up Info, Schematics, SDR Software/Security Info. The above exhibits contain ou r trade secrets and proprietary information that could be of benefit to o ur competitors. This information will not be publicly available. If you have any questions, please feel free to contact us at the address shown below. Sincerely, Company Name: Phone: Company Address: Fax: E-mail: Contact Name: Signature: Signature Date: Check your GC here. Click Grantee Search. FCC I D: Grantee Code Equipment Product Code

Document Version 1.1 2020-10-30 SHORT-TERM CONFIDENTIALITY REQUEST for Certification Service in the USA Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 TO WHOM IT MAY CONCERN Pursuant to Paragraphs §0.457 and 0.459 of the Commission’s Rules (47 C.F.R.) and Section §552(b)(4) of the Freedom of Information Act, we request Short-Term Confidentiality for the following product: For the product stated above, we request Short-Term Confidentiality for exhibits which contain External Photos, Internal Photos, Test Setup Photos, User Manual. We request Short-Term Confidentiality on the basis of ensuring that business sensitive information remains confidential until the actual marketing of our new device which is planned for: We are aware that the Short-Term Confidentiality must be released when the product is marketed. If you have any questions, please feel free to contact us at the address shown below. Sincerely, Company Name: Phone: Company Address: Fax: E-mail: Contact Name: Signature: Signature Date: Check your GC here. Click Grantee Search. FCC ID: Grantee Code Equipment Product Code

1 A 1 A 2 B 2 B 3 C 3 C 4 D 4 D 5 E 5 E 6 F 6 F 7 G 7 G 8 H 8 9 9 10 10 11 11 12 A2 00 T249131 IndexalterationChange no Fit Toler. PPAP-Level 2 /WN 50020 Material: Weight: in kg Inspection Dim. Aux.Dim. ( ) DateName 0 Drawn 2025-11-07 P.Skworzow Blank no: CheckedTitle: DC Prod. Auth'd electronic control unit M.checkScale KCU20 / Dr awing Number Sheet: / 1 3908089219 of: Languages: Confidential Document Refer to protection notice ISO16016 1 DE;EN Repl. Orig. 3908089219V00DEd001 in Work 5117448/D2D/001/00 First angle projection Linde Material Handling GmbH Name CAN BaudratePart number KCU20 500kBd 3903701674 PIN FunctionDirection 1 VCC: Clamp 30 (6V-36V) PWR 2 ETH1_1_N (Ethernet) IO 3 GND: Clamp 31 PWR 4 Analog Input (Wake Up KAP) I 5 ETH1_1_P (Ethernet) IO 6 ETH1_0_N (Ethernet) IO 7 Digital Output (Wake Up Truck) O 8 Analog Input (Wake Up from truck, Pin BK4) I 9 ETH1_0_P (Ethernet) IO 10 CAN1-GND PWR 11 CAN1-High (galvanic isolated) IO 12 CAN1-Low (galvanic isolated) IO 13 CAN0-High IO 14 CAN0-LowIO PIN Assignment I=Input, O=Output, IO=Bidirectional, PWR=Supply PLACEHOLDER KCU20 Part number Product name Model name Serial number Article number manufacturer Power supply IMEI Date of production Protection class PLACEHOLDER KCU20 Label on rear of housing Radio- and Country approvals PLACEHOLDER KCU20 Data Matrix Code, Typ ECC200 in accord ISO/IEC 16022 Constitution: Part number without space (xxxxxxxxxx); Serial number (nnnnnnn) Example.: xxxxxxxxxx;nnnnnnn Mating connector: 14-Pin (female, Coding 1) FEP-Nr. 42125300 38.3 31.2 20.57 9 ⌀ 90 73.2 147.4

Test Report No. 1-9724-25-01-17_TR2-R02 April 28. 2026 ApplicantComnovo GmbH ProductKION Connect Unit ModelKCU20 (C-Sample) Tested TechnologyLTE, WLAN, BT LE, UWB Test StandardFCC 47 CFR Part 2 VerdictTEST EXEMPTION FULFILLED The test results apply only to the equipment specified in this document. This test report is electronically signed and valid without handwritten signature. Public keys for verification of the electronic signatures can be requested at the testing laboratory. Alexander Hnatovskiy Coordinator Area Regulatory Services Radio authorized by Eric Tuettmann Testing Manager Regulatory Services Radio created by cetecom advanced GmbH Untertuerkheimer Str. 6-10, 66117 Saarbruecken Document No. 1-9724-25-01-17_TR2-R02 Page 1 of 17 Table of Contents 1.Disclaimer....................................................................................................................................................3 2.Document history..........................................................................................................................................4 2.1.Current release.................................................................................................................................................................................4 2.2.Previous releases.............................................................................................................................................................................4 3.Test laboratory..............................................................................................................................................5 3.1.Contact information.........................................................................................................................................................................5 3.2.Involved test locations......................................................................................................................................................................5 3.3.Subcontracted laboratories...............................................................................................................................................................5 3.4.Laboratory listings and recognitions.................................................................................................................................................5 4.Client information.........................................................................................................................................6 4.1.Applicant..........................................................................................................................................................................................6 4.2.Manufacturer....................................................................................................................................................................................6 5.Test sample information...............................................................................................................................7 5.1.General Information.........................................................................................................................................................................7 5.1.1.General Data of Main EUT as Declared by Applicant...................................................................................................................7 6.Measurement details....................................................................................................................................8 6.1.Test methodology.............................................................................................................................................................................8 7.1.1 General Information................................................................................................................................9 7.1.Notes&References............................................................................................................................................................................9 7.2.References.......................................................................................................................................................................................9 7.3.General RF Exposure Test Exemptions..............................................................................................................................................9 8.MPE Based Test Exemption........................................................................................................................11 8.1.KDB 447498 D04 Interim General RF Exposure Guidance v01, section 2.1.4:....................................................................................11 8.1.1.Results....................................................................................................................................................................................13 8.1.2.Values:....................................................................................................................................................................................14 9.Simultaneous Transmission........................................................................................................................15 9.1.KDB 447498 D04 Interim General RF Exposure Guidance v01, section 2.2.1:....................................................................................15 9.1.1.Results....................................................................................................................................................................................16 10.Conclusion................................................................................................................................................17 10.1.According to KDB 447498 v01 (Interim General RF Exposure…

Text truncated - open the document above for the full version.

`Dielectric Chip Antenna - 1 - Stub L W T Chip Antenna Dimension Chip Antenna Soldering Pad Dimension PCB Soldering Land & Stub Dimension B A B C A C A A E A E A F D A Soldering Land D L8.0 W6.0 T1.2 A1.0 B2.0 C1.5 D2.1 E1.6 F13.0 ■ ELECTRICAL CHARACTERISTICS SWR & Smith chart ■ MECHANICAL DIMENSION (unit : mm, tolerance : ± 0.1) This specification covers the dielectric chip antenna ACS5200HFAUWB used in3200~7200MHzWireless Communication. ■ P/N : ACS5200HFAUWB `Dielectric Chip Antenna - 2 - ■ ELECTRICAL CHARACTERISTICS (2D) 2D Measurement Frequency [MHz]32004200520062007200 Gain Azimuth Theta Peak-0.882.732.514.161.31 Average-4.26-1.22-1.88-1.10-4.82 Phi Peak-3.84-2.16-1.91-2.61-5.20 Average-9.61-8.20-8.16-9.96-11.63 Elevation 1 Theta Peak-5.05-2.32-1.030.30-0.68 Average-10.36-8.84-7.90-6.99-8.06 Phi Peak-2.991.981.812.920.20 Average-6.65-3.30-3.37-3.04-3.71 Elevation 2 Theta Peak-5.83-3.38-2.050.26-3.56 Average-10.76-9.16-7.01-5.74-8.27 Phi Peak-0.522.231.521.391.12 Average-5.23-3.30-3.66-3.90-4.74 Azimuth PlaneElevation1 PlaneElevation2 Plane 0° 90° 180° 270° 0° 90° 180° 270° 0°180° 90° 270° ThetaVertical field of measured plane PhiHorizontal field of measured plane `Dielectric Chip Antenna - 3 - Azimuth Theta -50 -40 -30 -20 -10 0 0 30 60 90 120 150 180 210 240 270 300 330 -50 -40 -30 -20 -10 0 Amplitude [dB] 3.2000 G 4.2000 G 5.2000 G 6.2000 G 7.2000 G Azimuth Theta Azimuth Phi -50 -40 -30 -20 -10 0 0 30 60 90 120 150 180 210 240 270 300 330 -50 -40 -30 -20 -10 0 Amplitude [dB] 3.2000 G 4.2000 G 5.2000 G 6.2000 G 7.2000 G Azimuth Phi ■ 2D RADIATION PATTERN `Dielectric Chip Antenna - 4 - Elevation1 Theta -50 -40 -30 -20 -10 0 0 30 60 90 120 150 180 210 240 270 300 330 -50 -40 -30 -20 -10 0 Amplitude [dB] 3.2000 G 4.2000 G 5.2000 G 6.2000 G 7.2000 G Elevation1 Theta Elevation1 Phi -50 -40 -30 -20 -10 0 0 30 60 90 120 150 180 210 240 270 300 330 -50 -40 -30 -20 -10 0 Amplitude [dB] 3.2000 G 4.2000 G 5.2000 G 6.2000 G 7.2000 G Elevation1 Phi ■ 2D RADIATION PATTERN `Dielectric Chip Antenna - 5 - Elevation2 Theta -50 -40 -30 -20 -10 0 0 30 60 90 120 150 180 210 240 270 300 330 -50 -40 -30 -20 -10 0 Amplitude [dB] 3.2000 G 4.2000 G 5.2000 G 6.2000 G 7.2000 G Elevation2 Theta Elevation2 Phi -50 -40 -30 -20 -10 0 0 30 60 90 120 150 180 210 240 270 300 330 -50 -40 -30 -20 -10 0 Amplitude [dB] 3.2000 G 4.2000 G 5.2000 G 6.2000 G 7.2000 G Elevation2 Phi ■ 2D RADIATION PATTERN `Dielectric Chip Antenna - 6 - ■ Gain Measurement block diagram ■ Soldering Condition - Reflow Soldering - Reflow Soldering Preheat 130 ~ 180°C 200°C 160°C 100°C 25°C 0°C Peak temp. 260±5°C 90 ~ 180sec Max 30sec 30~60sec 260°C Time [sec] - Manual Soldering Condition Pre-Heating Temperature120 °C ,60 ∼ 300 sec Soldering Temperature340 °C ±5 °C , 5 sec max per each terminal `Dielectric Chip Antenna - 7 - GND clearance region Ground Region Stub region Antenna GND clearance region Ground Region < Top View >< Bottom View > ■ Recommended Test Board(CAD) ■ FEEDING METHOD (unit : mm, tolerance : ± 0.05) Unit : mm Board thickness : 1.0mm `Dielectric Chip Antenna - 8 - ■ LOT 번호 표기법 &Marking ◀ UWB 3 C ①②③④ ① Feeding Direction ② Model ③년 : 0 - 2010, 1 - 2011, 2 - 2012, 3 - 2013, 4 - 2014, .... ④ 월 :1-1 월 ,2-2 월 , .... ,A-10 월 ,B-11 월 ,C-12 월 Marking View

TEST REPORT Test report no.: 1-9724-25-01-16_TR1-R01 Testing laboratory Applicant cetecom advanced GmbH Untertuerkheimer Strasse 6 – 10 66117 Saarbruecken / Germany Phone: + 49 681 5 98 - 0 Fax: + 49 681 5 98 - 9075 Internet: https://www.cetecomadvanced.com e-mail: [email protected] Accredited Testing Laboratory: The testing laboratory (area of testing) is accredited according to DIN EN ISO/IEC 17025 (2018-03) by the Deutsche Akkreditierungsstelle GmbH (DAkkS). The accreditation is valid for the scope of testing procedures as stated in the accreditation certificate with the registration number: D-PL-12047-01-00. ISED Testing Laboratory Recognized Listing Number: DE0001 FCC designation number: DE0002 Comnovo GmbH Robert-Schuman-Straße 6 44263 Dortmund / GERMANY Phone: +49 231 700996 10 Contact: Volker Köster e-mail: [email protected] Manufacturer Comnovo GmbH Robert-Schuman-Straße 6 44263 Dortmund / GERMANY Test standard/s FCC - Title 47 CFR Part 15 FCC - Title 47 of the Code of Federal Regulations; Chapter I; Part 15 - Radio frequency devices For further applied test standards please refer to section 3 of this test report. Test Item Kind of test item: KION Connect Unit Model name: KCU20 FCC ID: 2BUWNKCU3908089219 Frequency band: 3100 MHz to 10600 MHz Technology tested: UWB Antenna: Integrated antenna Power supply: 8.5 V to 36.0 V DC by external power supply (battery) Temperature range: -40°C to +85°C This test report is electronically signed and valid without handwritten signature. For verification of the electronic signatures, the public keys can be requested at the testing laboratory. Test report authorized: Test performed: Meheza Walla Frank Heussner Lab Manager Coordinator Area Regulatory Services Radio Regulatory Services Radio Test report no.: 1-9724-25-01-16_TR1-R01 © cetecom advanced GmbH Page 2 of 73 1 Table of contents 1 Table of contents ....................................................................................................................................... 2 2 General information ................................................................................................................................... 3 2.1 Notes and disclaimer ....................................................................................................................... 3 2.2 Application details ........................................................................................................................... 3 2.3 Involved test locations ..................................................................................................................... 4 2.4 Test laboratories sub-contracted ..................................................................................................... 4 2.5 Laboratory listings and recognitions ................................................................................................ 4 3 Test standard/s, references and accreditations ......................................................................................... 5 4 Reporting statements of conformity – decision rule .................................................................................. 6 5 Test environment ...................................................................................................................................... 7 6 Test item ................................................................................................................................................... 7 6.1 General description .......................................................................................................................... 7 6.2 Additional information ..................................................................................................................... 8 7 Description of the test setup ...................................................................................................................... 9 7.1 Shielded semi anechoic chamber ................................................................................................... 10 7.2 Shielded fully anechoic chamber ................................................................................................... 12 7.3 Radiated measurements > 18 GHz ................................................................................................. 15 8 Sequence of testing ................................................................................................................................. 16 8.1 Sequence of testing radiated spurious 9 kHz to 30 MHz ................................................................ 16 8.2 Sequence of testing radiated spurious 30 MHz to 1 GHz................................................................ 17 8.3 Sequence of testing radiated spurious 1 GHz to 18 GHz ................................................................ 18 8.4 Sequence of testing radiated spurious above 18 GHz .................................................................... 19 8.5 Sequence of testing efficient use of spectrum ............................................................................... 20 9 Measurement uncertainty ........................................................................................................................ 21 10 Summary of measurement results ..................................................................................................... 22 11 Additional comments ......................................................................................................................... 23 12 Measurement results ......................................................................................................................... 25 12.1 10 dB - Bandwidth ..................................................................................................................... 25 12.2 TX Radiated Emissions ....................................................................................…

Text truncated - open the document above for the full version.