2BUWS1070020001Radar-based Bullet Detection Sensor

7155 Columbia Gateway Drive – Suite C – Columbia, MD 21046 www.wavepointsolution.com Certification Application Attestation Statements Date: April 8, 2026 American Certification Body, Inc. 313 Park Avenue Suite 300 Falls Church, VA 22046 To Whom It May Concern: Statement for 47 CFR section 2.911(d)(5)(i) WavePoint Solutions LLC certifies that as of the date of the application the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. If the equipment for which the applicant seeks authorization is produced by any of the entities identified on the current Covered List, including affiliates or subsidiaries of the named companies, the applicant must include an explanation on why the equipment is not “covered” equipment. Additional Explanation: <N/A> Statement for 47 CFR section 2.911(d)(5)(ii) WavePoint Solutions LLC (“the applicant”) certifies that, as of the date of the filing of this application, the applicant ☐ - is / ☐ - is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates – see KDB 986446 Question 5) as an entity producing “covered” equipment. The applicant also certifies that the device does not have cybersecurity and/or anti-virus software produced by Kaspersky Lab, Inc or any of its successors and assignees identified on the covered list installed on the device, nor will it be installed by the applicant at any time after certification. Thank you, By: __________________________ _Shawn Sweep_ (Signature) (Print name) Title: Electrical Engineer Company: WavePoint Solutions LLC Telephone: +1 (410) 884-0500 x228

7155 Columbia Gateway Drive – Suite C – Columbia, MD 21046 www.wavepointsolution.com U.S. Agent Designation for Service of Process TO: American Certification Body, Inc. 313 Park Avenue Suite 300 Falls Church, VA 22046 ATTENTION: FCC Certification – Section 2.911(d)(7) Information This letter is to confirm that the Applicant will also serve as the U.S. Agent for Service of Process as required by 47 CFR 2.911(d)(7). The Applicant acknowledges that they must maintain an agent for no less than one year after terminating all marketing and importation OR the conclusion of any Commission-related proceeding involving the equipment. The Applicant further acknowledges their responsibility to inform the FCC whenever the Designated U.S. Agent information changes. Applicant Company name: WavePoint Solutions LLC FRN #: 0038044277 Grantee Code: 2BUWS Contact Name: Shawn Sweep Street Address: 7155 Columbia Gateway Drive, Suite C City/Province/Zip: Columbia, MD, 21046 Telephone No: +1 (410) 884-0500 x228 Email: [email protected] Applicant Signature: Date: 3/8/2026 Signed by (Printed Name/Title): Shawn Sweep, Electrical Engineer

SG-23483003v1 MUTUAL CONFIDENTIALITY AGREEMENT THIS MUTUAL CONFIDENTIALITY AGREEMENT (this “Agreement”), dated as of [DATE], is by and between WavePoint Solutions LLC, a Delaware limited liability company (“WavePoint”) with an address at 7155 Columbia Gateway Drive, Suite C, Columbia, MD 21046 and [COUNTERPARTY] (“Counterparty”) with an address at [ADDRESS]. The parties hereto are sometimes referred to individually as a “Party” and collectively as the “Parties”. WHEREAS, each Party desires to disclose to the other Party certain information for the sole purpose of evaluating a business relationship (such purpose shall be hereinafter referred to as the “Activities”). NOW, THEREFORE, in consideration of the foregoing and of the promises and covenants herein contained, the Parties hereby agree as follows: 1. The term “Confidential Information” shall mean all information, oral and written, and all materials (in any medium), disclosed or delivered by one Party (in such capacity, the “Discloser”) to the other Party (in such capacity, the “Recipient”) whether or not marked as confidential and whether provided prior to, on or after the date hereof up to the effective date of any termination of this Agreement; provided that Confidential Information of Discloser does not include information that: (a) through no breach of this Agreement is or becomes publicly available, (b) is or was lawfully obtained from a third party, on an unrestricted basis, without breach of any obligation between the third party and the Discloser, (c) was already known by Recipient, on an unrestricted basis, at the time of disclosure by Discloser as evidenced by documents maintained in the ordinary course of business or (d) was independently developed by or on behalf of Recipient without use of or reference to the Discloser’s Confidential Information as evidenced by Recipient’s written records. Without limiting the foregoing, “Confidential Information” of WavePoint shall include any and all internal photos, user’s manuals, schematics, block diagrams, operational descriptions, parts lists and tune-up information related to any product or device designed, manufactured, sold, in development or otherwise related to WavePoint’s business. 2. In consideration of the disclosure of the Confidential Information, the Recipient shall not use or duplicate any Confidential Information of the Discloser except as necessary to evaluate the Activities and Recipient shall keep confidential and not disclose any Confidential Information of the Discloser to any person or entity, other than to those employees of the Recipient whose knowledge is necessary to evaluate the Activities and to its professional advisors (e.g., attorneys and accountants) provided that all such employees and professional advisors are advised of their obligations to maintain the confidentiality of Discloser’s Confidential Information and to not use such Confidential Information except as necessary to evaluate the Activities and are bound by written agreements or, in the case of professional advisors, ethical duties, respecting the Confidential Information in the manner set forth in this Agreement. The Recipient shall be responsible for any breach of this Agreement caused by any act or omission by any employee or professional advisor of the Recipient to whom such Confidential Information of Discloser may be disclosed by the Recipient. Without limiting any of the foregoing, the Recipient shall protect the Confidential Information of the Discloser with at least the same degree of care as it exercises to protect its own confidential information, but in no event less than reasonable care. Neither Party shall disclose to any person or entity, other than its employees and professional advisors any information relating to the Activities or the fact that the Parties are discussing or evaluating any type of potential transaction or relationship; provided, however, that a Party may disclose this Agreement to any bona fide potential or actual investor, acquirer, merger partner or other financial partner (including their professional advisors) for the sole purpose of evaluating an actual or potential investment, acquisition, transaction or other business relationship provided that, in each case, the recipients are bound by written obligations of confidentiality and non-use no less restrictive than those contained in this Agreement. Nothing in this Agreement, express or implied, shall grant the Recipient a right or license to use any of the information in, or otherwise practice any invention set forth in, the Discloser’s patents or patent applications even after the SG-23483003v1 2 expiration or termination of this Agreement or Recipient’s obligations hereunder and even if such information does not constitute Confidential Information. 3. Notwithstanding Section 2 herein, the Recipient may produce or disclose Confidential Information of the Discloser if and to the extent required pursuant to applicable laws, regulations or court order; provided that, to the extent permitted by applicable law, the Recipient has given the Discloser reasonable prior written notice thereof so that the Discloser may seek a protective order or other appropriate remedy and/or waive compliance with the provisions of this Agreement. If such protective order or other remedy is not obtained, or the Discloser waives compliance with the provisions of this Agreement, the Recipient shall furnish only that portion of the Confidential Information of the Discloser that the Recipient is legally required to disclose and shall exercise all commercially reasonable efforts to obtain reliable assurance that confidential treatment shall be accorded such Confidential Information. 4. The Parties acknowledge and agree that: (a) As between the Parties, all Confidential Information of the Discloser is and shall remain the exclusive and valuable property of the Discloser; (b) The Recipient does not hereby obtain any express or implied l…

Text truncated - open the document above for the full version.

7155 Columbia Gateway Drive – Suite C – Columbia, MD 21046 www.wavepointsolution.com Authority to Act as Agent Date: March 10, 2026 A merican Certification Body, Inc. 313 Park Avenue Suite 300 Falls Church, VA 22046 T o Whom It May Concern: Rhein Tech Laboratories, Inc. is authorized to act on our behalf, until otherwise notified, for applications to American Certification Body, Inc. (ACB). We cer tify that we are not subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Further, no party, as defined in 47 CFR 1.2002 (b), to the application is subject to denial of federal benefits, that includes FCC benefits. W e also declare that the information provided to the FCC is true and correct to the best of our knowledge (47 CFR 2.911(d)) and we have been informed of the grantee responsibilities (47 CFR 2.909) with regard to certified equipment. T hank you, A gency Agreement Expiration Date: _3/9/2027_ By: __________________________ Shawn Sweep (Signature) (Print name) Title: Electrical Engineer O n behalf of: WavePoint Solutions LLC (Company Name) Telephone: +1(410) 884-0500 x228

7155 Columbia Gateway Drive – Suite C – Columbia, MD 21046 www.wavepointsolution.com Request for Confidentiality Date: March 12, 2026 Subject: Confidentiality Request for: FCC ID: 2BUWS1070020001; IC: 35285-1070020001_____ Pursuant to FCC 47 CFR 0.457(d) and 0.459 and IC RSP-100, Section 12.4, the applicant requests that a part of the subject FCC application be held confidential. Type of Confidentiality Requested Exhibit ☐ Short Term ☒ Permanent Block Diagrams ☒ Short Term --------------------------- External Photos ☐ Short Term ☒ Permanent Internal Photos ☐ Short Term ☒ Permanent Operation Description/Theory of Operation ☐ Short Term ☒ Permanent Parts List & Placement/BOM ☐ Short Term ☒ Permanent Tune-Up Procedure ☐ Short Term ☒ Permanent Schematics ☒ Short Term --------------------------- Test Setup Photos ☐ Short Term ☒ Permanent User’s Manual ______WavePoint Solutions LLC______ has spent substantial effort in developing this product and it is one of the first of its kind in industry. Having the subject information easily available to "competition" would negate the advantage they have achieved by developing this product. Not protecting the details of the design will result in financial hardship. Permanent Confidentiality: The applicant requests the above exhibits marked for permanent confidentiality be permanently withheld from public review because these materials contain trade secrets and proprietary information not customarily released to the public. Furthermore, the product will be installed at a minimum of 15ft above the ground, including but not limited to on telephone poles and the sides of buildings, inaccessible to the general public, by trained installers under an NDA. All sales of this non-consumer device will be under an NDA to include third party sales, and the final users of the device will also be subject to an NDA. The NDA provided to third party sales, customers, and installers is included with this application. Short-Term Confidentiality for FCC Applications: The applicant requests the exhibits selected above as short term confidential be withheld from public view for a period of __45__ days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. Applicant is also aware that they are responsible to notify ACB in the event information regarding the product or the product is made available to the public before the requested period has expired. ACB will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04-1705. Short Term Confidentiality for Industry Canada Applications: Starting May 2022, ISED will recognize short term confidentiality on certain exhibits until the intended date of marketing. The applicant requests the exhibits selected above as short term confidential be withheld from public view until: April 22 nd , 2026 . Sincerely, By: , Electrical Engineer Shawn Sweep (Signature/Title) (Print name)

FCC Label 1 This device complies with Part 15 of the FCC Rules. OperaƟon is subject to the following two condiƟons: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operaƟon. FCC ID: 2BUWS1070020001 3.1in. wide 1.8in. tall Calibri 8pt font This is a vinyl label applied with a permanent adhesive and is not readily detachable. It will be applied prior to shipping by a contract manufacturer. Label placed on back of system

Rhein Tech Laboratories, Inc. Client: WavePoint Solutions LLC 360 Herndon Parkway, Suite 1400 Model: PRIZM Herndon, VA 20170 Standards: Pt. 90/RSS-119 http://www.rheintech.com Report #: 2025095TNB Appendix A: RF Exposure - FCC Rules and Regulations Part 1.1307, 1.1310, 2.1091, 2.1093, and ISED RSS-102 Issue 6, Maximum Permissible Exposure (MPE) Assessment 1 Equipment Description The Equipment Under Test (EUT) is a 10.5 GHz FMCW radar transmitter operating with a 50 MHz bandwidth (50M9P0N). The device transmits continuously using Frequency Modulated Continuous Wave (FMCW) modulation. Because the transmitter operates continuously during normal operation, a 100% duty cycle is conservatively assumed for the RF exposure evaluation. The radar is intended for fixed installation environments where the device may be located in areas accessible to the general public. The RF exposure evaluation is performed in accordance with: • 47 CFR §1.1310 • FCC OET Bulletin 65 • FCC KDB 447498 D01 – General RF Exposure Guidance • ISED: RSS-102 Issue 6 (March 2023); Safety Code 6 (2015) 2 Technical Parameters Parameter Value Operating Frequency 10.0 GHz Emission Designator 50M9P0N Maximum Conducted Output Power 29 dBm Antenna Gain 8.98 dBi Maximum ERP 35.83 dBm Maximum EIRP 37.98 dBm Maximum EIRP (Linear) 6.28 W Duty Cycle 100% Largest Antenna Dimension (D) 10.4 cm Exposure Category General Population / Uncontrolled 3 Applicable RF Exposure Limits According to FCC 47 CFR §1.1310, and ISED: RSS-102 Issue 6 (March 2023); Safety Code 6 (2015) the Maximum Permissible Exposure limits for frequencies between 1.5 GHz and 100 GHz are: Exposure Environment FCC Limit (mW/cm²) FCC Limit (W/m²) ISED Limit (mW/cm²) ISED Limit (W/m²) General Population / Uncontrolled 1.0 10.0 1.0 10.0 Occupational / Controlled 5.0 50.0 5.0 50.0 Average time (uncontrolled) 30 minutes 30 minutes 6 minutes 6 minutes Rhein Tech Laboratories, Inc. Client: WavePoint Solutions LLC 360 Herndon Parkway, Suite 1400 Model: PRIZM Herndon, VA 20170 Standards: Part 90/RSS-119 http://www.rheintech.com Report #: 2025095TNB 4 RF Exposure Evaluation Method The power density is calculated using the far-field equation from OET Bulletin 65: 푆푆= 퐸퐸퐸퐸퐸퐸퐸퐸 4휋휋 퐸퐸 2 Where: Symbol Definition S Power density (W/m²) EIRP Equivalent isotropic radiated power (W) R Distance from antenna (m) Worst-case EIRP = 6.28 W is used. 5 RF Exposure Summary Table Parameter Value Maximum EIRP 37.98 dBm Maximum EIRP (Linear) 6.28 W Minimum Separation Distance 0.5 m Calculated Power Density 0.20 mW/cm² FCC Limit 1.0 mW/cm² Compliance Margin 5× below limit Result PASS 6 Power Density vs Distance Distance (m) Power Density (W/m²) Power Density (mW/cm²) FCC Limit (mW/cm²) Result 0.1 49.98 4.998 1.0 Fail 0.2 12.49 1.25 1.0 Fail 0.3 5.55 0.555 1.0 Pass 0.5 2.00 0.20 1.0 Pass 0.75 0.89 0.084 1.0 Pass 1.0 0.50 0.05 1.0 Pass 2.0 0.125 0.013 1.0 Pass 7 Power Density vs Distance Graph A power density vs distance curve derived from the above data demonstrates that RF exposure decreases rapidly with increasing separation distance. Key observation: • At 0.5 m separation, power density is already 5× below the FCC limit. • At 1 m separation, exposure drops to 0.05 mW/cm², which is 20× below the limit. This confirms substantial compliance margin for typical installation distances. Rhein Tech Laboratories, Inc. Client: WavePoint Solutions LLC 360 Herndon Parkway, Suite 1400 Model: PRIZM Herndon, VA 20170 Standards: Part 90/RSS-119 http://www.rheintech.com Report #: 2025095TNB 8 Far-Field Boundary Determination To confirm the applicability of the far-field equation, the far-field boundary is estimated using: 퐸퐸 퐹퐹퐹퐹 = 2퐷퐷 2 휆휆 Where: Parameter Value Largest Antenna Dimension (D) 0.104 m Wavelength at 10.5 GHz 0.03 m 퐸퐸 퐹퐹퐹퐹 = 2(0.104) 2 0. 03 퐸퐸 퐹퐹퐹퐹 ≈0. 72 푚푚 Distance Region 0.5 m Radiating Near Field 0.75 m Transition Region 1.0 m Far Field The calculation method provides a conservative estimate of RF exposure. 9 Installation Requirement To ensure compliance with FCC RF exposure limits, the following conditions must be observed: The antenna must be installed and operated with a minimum separation distance of 50 cm between the antenna and all persons. 10 ISED Installation Requirement To ensure compliance with ISED RSS-102 Issue 6 and Safety Code 6 RF exposure limits, the following conditions must be observed: The antenna must be installed and operated with a minimum separation distance of 50 cm between the antenna and all persons. This separation distance ensures that RF exposure levels remain below the ISED general population / uncontrolled exposure limit of 1.0 mW/cm² when averaged over any 6-minute period, as specified in Safety Code 6 (2015). 11 Compliance Statement The maximum calculated power density at the minimum separation distance of 0.5 m is: 0. 20푚푚푚푚/푐푐푚푚 2 This value is five times below the FCC general population / uncontrolled exposure limit of 1.0 mW/cm² (47CFR§1.1310) and five times below the ISED general population / uncontrolled exposure limit of 1.0 mW/cm² (RSS-102 Issue 6; Safety Code 6, 2015). Therefore, the equipment complies with the RF exposure requirements of both FCC 47CFR§1.1310 and ISED RSS-102 Issue 6 / Health Canada Safety Code 6. No RF exposure measurements are required since compliance is demonstrated through conservative analytical calculations using maximum operating conditions. Rhein Tech Laboratories, Inc. Client: WavePoint Solutions LLC 360 Herndon Parkway, Suite 1400 Model: PRIZM Herndon, VA 20170 Standards: Part 90/RSS-119 http://www.rheintech.com Report #: 2025095TNB 12 Conclusion The maximum calculated power density at the minimum separation distance of 0.5 m is 0.20 mW/cm². Because the transmitter operates with a 100% duty cycle (FMCW continuous transmission), the time-averaged power density is equal to the peak power density regardless of the averaging interval. Therefore, the calculated value of 0.20 mW/cm² applies to both the FCC 30-minute averaging period (…

Text truncated - open the document above for the full version.

Engineering Solutions & Electromagnetic Compatibility Services 360 Herndon Pkwy | Suite 1400 | Herndon | Virginia 20170 Phone: 703.689.0368 | Fax: 703.689.2056 | www.rheintech.com FCC Certification Application Report WavePoint Solutions LLC 7155 Columbia Gateway Drive, Suite C Columbia, MD 21046 Model: PRIZM Radar Gunshot Detection Platform FCC ID: 2BUWS1070020001 April 8, 2026 Standards Referenced for this Report Part 2: 2023 Frequency Allocations and Radio Treaty Matters; General Rules and Regulations Part 90: 2023 Private Land Portable Radio Services ANSI C63.26-2021 American National Standard for Compliance Testing of Transmitters Used in Licensed Radio Services Report Prepared By: Daniel W. Baltzell Document Number: 2025095TNB This report may not be reproduced, except in full, without the full written approval of Rhein Tech Laboratories, Inc. and WavePoint Solutions LLC. Test results relate only to the item tested. This report replaces R1.1. These tests are accredited and meet the requirements of ISO/IEC 17025 as verified by ANAB. Refer to certificate and scope of accreditation AT-1445. Rhein Tech Laboratories, Inc. Client: WavePoint Solutions LLC 360 Herndon Parkway, Suite 1400 Model: PRIZM Herndon, VA 20170 Standards: Pt. 90 http://www.rheintech.com Report #: 2025095TNB Page 2 of 36 Table of Contents 1 Test Result Summary ................................................................................................................................... 4 2 General Information ...................................................................................................................................... 4 2.1 Test Facility ............................................................................................................................................. 4 2,2 Measurement Uncertainty ...................................................................................................................... 4 2.3 Related Submittal(s)/Grant(s) ................................................................................................................. 4 2.4 Grant Notes ............................................................................................................................................ 4 2.5 Tested System Details ............................................................................................................................ 5 2.5.1 Configuration of Tested System .................................................................................................... 5 3 FCC Part 2.1033(C)(8): Voltages and Currents through the Final Amplifying Stage ................................... 6 4 FCC Part 2.1046(a): RF power output: Conducted; Part 90.541(d) Transmitting power and antenna height requirements ............................................................................................................................................. 6 4.1 Test Procedure ....................................................................................................................................... 6 4.2 Test Data ................................................................................................................................................ 6 5 FCC Part 2.1051: Spurious Emissions at Antenna Terminals; Part 90.210: Emission Limitations ........... 10 5.1 Test Procedure ..................................................................................................................................... 10 5.2 Test Data .............................................................................................................................................. 11 6 FCC Part 90.210 and Part 2.1053(a): Field Strength of Spurious Emissions ............................................ 17 6.1 Test Procedure ..................................................................................................................................... 17 6.2 Test Data .............................................................................................................................................. 17 7 FCC Part 2.1049(c)(1): Occupied Bandwidth; Part 90.210 Authorized Bandwidth .................................... 20 7.1 Test Procedure (Emission Masks – FCC) ............................................................................................ 20 7.2 Occupied Bandwidth Test Data ............................................................................................................ 21 8 FCC Part 2.1055: Frequency Stability; Part 90.213, Part 90.539: Frequency Stability ............................. 31 8.1 Test Procedure ..................................................................................................................................... 31 8.2 Test Data .............................................................................................................................................. 33 8.2.1 Frequency Stability/Voltage Variation .......................................................................................... 35 9 Conclusion .................................................................................................................................................. 36 Rhein Tech Laboratories, Inc. Client: WavePoint Solutions LLC 360 Herndon Parkway, Suite 1400 Model: PRIZM Herndon, VA 20170 Standards: Part 90 http://www.rheintech.com Report #: 2025095TNB Page 3 of 36 Table of Tables Table 2-1: Equipment Under Test (EUT) ......................................................................................................... 5 Table 2-2: EUT ................................................................................................................................................. 5 Table 4-1: Environmental Conditions ............................................................................................................... 6 Table 4-2: RF Conducted Output Power – Measured ..................…

Text truncated - open the document above for the full version.