2BV28-TESEET1Smart Glasses

TESEE INC. To: Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Attestation Section 2.911(d)(5)(i) and Section 2.911(d)(5)(ii) (KDB 986446 D01 Covered Equipment) Section 2.911(d)(5)(i) TESEE INC.certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. The software to be loaded prior to marketing of the equipment identified below is not "covered" software manufactured by any entity including predecessors, successors, parents, subsidiaries, or affiliates or any entity which has rebranded or relabeled the software produced by the entity(ies) identified on the "Covered List" DA 24-886 and KDB 986446 D01 Covered Equipment Guidance section B(2a). TESEE INC.further certifies that no Cybersecurity or anti-virus software produced or provided by Kaspersky Lab, Inc. or any of its successors and assignees, including equipment with integrated Kaspersky Lab, Inc. (or any of its successors and assignees) cybersecurity or anti-virus software is installed in the equipment being certified. Section 2.911(d)(5)(ii) TESEE INC. certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing “covered” equipment. Type of Equipment subject to FCC Certification: Smart Glasses FCC ID:2BV28-TESEET1 If you have any questions, please feel free to contact me Contactname:JeffGongLei Tel:+13055878767 Email:j [email protected] Companyname:TESEEI NC. DateofSignature:2026-05-21 ___________________________ Signatory (signatureoftheapplicant)

TESEE INC. To: Federal Communications Commission Date: 2026/05/22 7435 Oakland Mills Road Columbia, MD 21046 USA Attestation Certification designating a U.S. Agent for Service of Process Section 2.911(d)(7) (KDB 986446 D01 Covered Equipment) TESEE INC. as required by section 2.911(d)(7), designate below contact located in the United States for purposes of acting as the applicant’s agent for service of process. The applicant also acceptance to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Type of Equipment subject to FCC Certification: Smart Glasses FCC ID: 2BV28-TESEET1 Sincerely yours, Applicant/Grantee US Agent _________________ ___________________ (Signature) (Signature) TESEE INC. T ESEE INC. FRN: 0038409116 F RN: 0038409116 Jeff Gong Lei J eff Gong Lei Staff Engineer Electrical S taff Engineer Electrical [email protected] j [email protected] 1301 6TH AVE, SEATTLE, WA, 98101-2304, UNITED STATE 1 301 6TH AVE, SEATTLE, WA, 98101-2304, U NITED STATE

TESEEI NC. Date:2026/05/21 To:F ederalCommunicationsCommission, Authorization&EvaluationDivision, 7435OaklandMillsRoad, Columbia,MD21046 ToWhomI tMayConcern: TheTESEEI NC.,theundersigned,herebyauthorizesMrs.WendyZhanfrom ShenzhenMorlabCommunicationsT echnologyCo.,L td.,t oa ctont he behalfoftheTESEEI NC.solelyi nmattersrelatingtotheapplicationf oran FCCequipmentauthorizationf orFCCI D:2 BV28-TESEET1i ncludingt he signingofdocumentsi nconnectionwitht hisApplication.Necessaryacts carriedoutShenzhenMorlabCommunicationsTechnologyCo.,Ltd.onour behalfoftheTESEEI NC.i nconnectionwitht heApplicationshallhavet he sameeffectasactsoftheTESEEI NC..TESEEI NC.alsoherebycertifythatno partyt ot hisapplicationi ss ubjectt oadenialofbenefits,i ncludingFCC benefits,pursuanttoSection5301oftheAnti-DrugAbuseActof1988,21 U.S.C.862. Thankyouforyourattentiontothismatter. YoursSincerely, Signatory: Contactname:JeffGongLei Tel:+13055878767 TESEEINC. Email:[email protected] Companyname:TESEEINC.

TESEEINC. Date:2025-05-21 To:F ederalCommunicationsCommission, Authorization&EvaluationDivision, 7435OaklandMillsRoad, Columbia,MD21046 Re:RequestofConfidentialityf orFCCI D:2BV28-TESEET1 ToWhomi tmayconcern: Pursuantt osections0.457and0.459ofCommission’sRules(CFR47), andSection552(b)(4)oft heFreedomofI nformationAct,TESEEI NC.hereby requestsconfidentialityandt reatmentofcertaini nformationaccompanyingt his application.Thematerialscontaint radesecretsandproprietaryi nformationnot customarilyreleasedtothepublic.Thepublicdisclosureofthesemattersmightbe harmfultotheApplicantandprovideunjustifiedbenefitstoi tscompetitors. WearealsoherebyrequestShort-TermConfidentialityfor180daysafterthegrant asoutlinedi nPublicNoticeDA04-1705.ThisprovisionwillgiveTESEEI NC. temporaryconfidentialityofcommerciallysensitivei nformationpriort oproduct release. Ther equestedPermanentandShort-TermConfidentialexhibitsarelistedas follows: PERMANENTANDSHORT-TERMCONFIDENTIALLIST ExhibitDescription PERMANENT 1BlockDiagram 2OperationalDescription 3Schematics 4BOM 5Tuneupprocedure SHORT-TERM 6ExternalPhotos 7InternalPhotos 8Test-SetupPhotos 9UserManual TheApplicantu nderstandst hatp ursuantt oRule0 .457,d isclosureofthis applicationandallaccompanyingdocumentations,whereapplicable,willnotbe madepublicbeforethedateoftheGrantforthisapplication. Signatory: Name:JeffGongLei Companyname:TESEEINC. Tel:+13055878767 Email:j [email protected]

FCC ID:2BV28-TESEET1 Model:T1 Made in China IC ID:35571-TESEET1 · Input 5.0V d.c. 1.0A Smart Glasses Model:T1 Color:Black Tesee App TESEE INC.Company: Address:1301 6TH AVE, SEATTLE, WA, 98101, UNITED STATE FCC ID:2BV28-TESEET1 Made in China IC ID:35571-TESEET1 · Input 5.0V d.c. 1.0A Model:T1 FCC ID:2BV28-TESEET1 Made in China IC ID:35571-TESEET1 · Input 5.0V d.c. 1.0A Inner side of temple

MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL.1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] REPORT No.：SZ26010081S01 Annex C Plots of System Performance Check Test Laboratory: Shenzhen Morlab Communications Technology Co., Ltd. Date: 2026.4.28 System Check_5750MHz Communication System: UID 0, CW (0); Frequency: 5750 MHz;Duty Cycle: 1:1 Medium: HSL_5750 Medium parameters used: f = 5750 MHz; σ = 5.112 S/m; ε r = 35.098; ρ = 1000 kg/m 3 Ambient Temperature：23.2 °C; Liquid Temperature：22.1 °C DASY5 Configuration: - Probe: EX3DV4 - SN3823; ConvF(4.52, 4.52, 4.52) @ 5750 MHz; Calibrated: 2026.01.07 - Sensor-Surface: 2mm (Mechanical Surface Detection) - Electronics: DAE4 Sn1324; Calibrated: 2025.08.15 - Phantom: Twin-SAM; Type: QD 000 P41 Ax; Serial: 2020 - Measurement SW: DASY52, Version 52.10 (4); SEMCAD X Version 14.6.14 (7501) CW5750/Area Scan (91x91x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm Maximum value of SAR = 10.1 W/kg CW5750/Zoom Scan (8x8x15)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=2mm Reference Value = 28.57 V/m; Power Drift = -0.10 dB Peak SAR (extrapolated) = 21.8 W/kg SAR(1 g) = 7.64 W/kg; SAR(10 g) = 2.21 W/kg Smallest distance from peaks to all points 3 dB below = 8.2 mm Ratio of SAR at M2 to SAR at M1 = 52.4% Maximum value of SAR (measured) = 10.1 W/kg 0 dB = 10.1 W/kg = 10.04 dBW/kg MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL.1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen, GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] REPORT No.：SZ26010081S01

MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL.1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] REPORT No.：SZ26010081S01 Annex D Plots of Maximum SAR Test Results Test Laboratory: Shenzhen Morlab Communications Technology Co., Ltd. Date: 2026.04.28 WLAN 5.8GHz_802.11ac VHT40_MCS0_Edge 4_0mm_Ch151 Communication System: UID 0, WLAN 5GHz (0); Frequency: 5755 MHz;Duty Cycle: 1:1.156 Medium: HSL_5750 Medium parameters used: f = 5755 MHz; σ = 5.124 S/m; ε r = 35.016; ρ = 1000 kg/m 3 Ambient Temperature：23.2 °C; Liquid Temperature：22.1 °C DASY5 Configuration: - Probe: EX3DV4 - SN3823; ConvF(4.52, 4.52, 4.52) @ 5755 MHz; Calibrated: 2026.01.07 - Sensor-Surface: 2mm (Mechanical Surface Detection) - Electronics: DAE4 Sn1324; Calibrated: 2025.08.15 - Phantom: Twin-SAM; Type: QD 000 P41 Ax; Serial: 2020 - Measurement SW: DASY52, Version 52.10 (4); SEMCAD X Version 14.6.14 (7501) Ch151/Area Scan (101x101x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm Maximum value of SAR (interpolated) = 5.06 W/kg Ch151/Zoom Scan (8x8x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=5mm Reference Value = 12.65 V/m; Power Drift = -0.07 dB Peak SAR (extrapolated) = 14.2 W/kg SAR(1 g) = 1.039 W/kg; SAR(10 g) = 0.276 W/kg Smallest distance from peaks to all points 3 dB below = 4.8 mm Ratio of SAR at M2 to SAR at M1 = 46.5% Maximum value of SAR (measured) = 5.07 W/kg 0 dB = 5.07 W/kg MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL.1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen, GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] REPORT No.：SZ26010081S01

MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL.1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] REPORT No.：SZ26010081S01 Annex E Conducted Power Note: Conducted power unit: dBm The target power was recorded in the manufacturer's document. 5.8GHz WLAN ANT 1 CH 149574518.1119.0020.0091.89 CH 157578517.6918.5020.0093.15 CH 165582517.6718.5020.0093.24 CH 149574517.1318.0018.0092.75 CH 157578516.7217.5018.0092.75 CH 165582516.3717.0018.0092.75 CH 151575517.2018.0018.0086.49 CH 159579516.3717.0018.0093.94 CH 149574518.1019.0020.0096.97 CH 157578517.9218.5020.0092.86 CH 165582517.4218.0020.0092.75 CH 151575518.5519.5020.0086.49 CH 149574517.2418.0018.0090.91 CH 157578516.7517.5018.0090.91 CH 165582516.3717.0018.0089.09 CH 151575517.2418.0018.0092.11 CH 159579516.6017.5018.0092.86 verage power (dBmTune-up Limit Duty Cycle %verage power (dBmTune-up Limit Duty Cycle %erage power (dBTune-up Limit Duty Cycle % CH 0024023.434.0076.961.762.5077.151.762.5077.20 CH 1924403.094.0077.011.762.5077.151.612.5077.20 CH 3924802.533.5077.011.042.0077.151.132.0077.20 verage power (dBmTune-up Limit Duty Cycle %verage power (dBmTune-up Limit Duty Cycle % CH 0024022.293.0062.59-0.410.5033.12 CH 1924402.113.0062.56-0.520.0033.12 CH 3924801.602.5062.51-1.070.0033.12 2Mbps3Mbps 20.0094.12 Power Setting LE Mode Channel 802.11a 6Mbps 802.11n-HT20 MCS0 802.11n-HT40 MCS0 802.11ac-VHT20 MCS0 802.11ax-HEW20 MCS0 802.11ax-HEW40 MCS0 Channel BR / EDR Frequency (MHz) Channel Tune-Up Limit Average power (dBm) 1Mbps2Mbps Mode 1Mbps 5.8GHz WLAN ANT 1 Mode Duty Cycle % 802.11ac-VHT40 MCS0 CH 159579517.5218.50 Frequency (MHz) Frequency (MHz) MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL.1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen, GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] REPORT No.：SZ26010081S01

MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL.1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] REPORT No.：SZ26010081S01 Annex F DASY Calibration Certificate

Annual validation for test lab. Appendix Annual validation for Test Lab. General calibration information Date 2025.09.25 Test Laboratory ShenZhen Morlab Communications Technology Co., Ltd. Antenna serial No. D5250V2-SN: 1176 Antenna Parameters with Head TSL Impedance, transformed to feed point 51.07Ω+2.05jΩ Return Loss -32.818dB General Antenna Parameters and Design Electrical Delay (one direction) 1.276 ns After long term use with 100W radiated power，only a slight warming of the dipole near the feed point can be measured The dipole is made of standard semirigid coaxial cable. The center conductor of the feeding line is directly connected to the second arm of the dipole. The antenna is therefore short-circuited for DC-signals. On some of the dipoles, small end caps are added to the dipole arms in order to improve matching when loaded according to the position as explained in the "Measurement Conditions" paragraph. The SAR data are not affected by this change. The overall dipole length is still according to the Standard No excessive force must be applied to the dipole arm， because they might bend or the soldered connections near the feed point may be damaged . Annual validation for test lab. Annual validation for test lab. Appendix Impedance Measurement Plot for Head TSL Annual validation for test lab. Appendix Annual validation for Test Lab. General calibration information Date 2025.09.25 Test Laboratory ShenZhen Morlab Communications Technology Co., Ltd. Antenna serial No. D5600V2-SN: 1176 Antenna Parameters with Head TSL Impedance, transformed to feed point 50.89Ω-2.58jΩ Return Loss -31.355dB General Antenna Parameters and Design Electrical Delay (one direction) 1.276 ns After long term use with 100W radiated power，only a slight warming of the dipole near the feed point can be measured The dipole is made of standard semirigid coaxial cable. The center conductor of the feeding line is directly connected to the second arm of the dipole. The antenna is therefore short-circuited for DC-signals. On some of the dipoles, small end caps are added to the dipole arms in order to improve matching when loaded according to the position as explained in the "Measurement Conditions" paragraph. The SAR data are not affected by this change. The overall dipole length is still according to the Standard No excessive force must be applied to the dipole arm， because they might bend or the soldered connections near the feed point may be damaged . Annual validation for test lab. Annual validation for test lab. Appendix Impedance Measurement Plot for Head TSL Annual validation for test lab. Appendix Annual validation for Test Lab. General calibration information Date 2025.09.25 Test Laboratory ShenZhen Morlab Communications Technology Co., Ltd. Antenna serial No. D5750V2-SN: 1176 Antenna Parameters with Head TSL Impedance, transformed to feed point 50.962Ω+0.196jΩ Return Loss -40.247dB General Antenna Parameters and Design Electrical Delay (one direction) 1.276 ns After long term use with 100W radiated power，only a slight warming of the dipole near the feed point can be measured The dipole is made of standard semirigid coaxial cable. The center conductor of the feeding line is directly connected to the second arm of the dipole. The antenna is therefore short-circuited for DC-signals. On some of the dipoles, small end caps are added to the dipole arms in order to improve matching when loaded according to the position as explained in the "Measurement Conditions" paragraph. The SAR data are not affected by this change. The overall dipole length is still according to the Standard No excessive force must be applied to the dipole arm， because they might bend or the soldered connections near the feed point may be damaged . Annual validation for test lab. Annual validation for test lab. Appendix Impedance Measurement Plot for Head TSL

NOTE: This document is issued by Shenzhen Morlab Communications Technology Co., the test report shall not be reproduced except in full without prior written permission of the company. The test results apply only to the particular sample(s) tested and to the specific tests carried out which is available on request for validation and information confirmed at our website. MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL.1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] REPORT No.：SZ26010081S01 Page 1 of 41 TEST REPORT APPLICANT : TESEE INC. PRODUCT NAME : Smart Glasses MODEL NAME : T1 BRAND NAME : Tesee FCC ID : 2BV28-TESEET1 STANDARD(S) : FCC 47 CFR Part 2 (2.1093) IEEE 1528-2013 RECEIPT DATE : 2026-02-04 TEST DATE : 2026-04-28 ISSUE DATE : 2026-06-11 Edited by: Pang Siyu (Rapporteur) Approved by: Shen Junsheng (Supervisor) MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL.1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] REPORT No.：SZ26010081S01 Page 2 of 41 DIRECTORY 1. Statement of Compliance·································································································· 5 2. Technical Information ········································································································ 6 2.1. Applicant and Manufacturer Information ····································································· 6 2.2. Equipment under Test (EUT) Description ···································································· 6 2.3. Environment of Test Site/Conditions ··········································································· 7 3. Specific Absorption Rate (SAR) ······················································································· 8 3.1. Introduction······················································································································ 8 3.2. SAR Definition ················································································································· 8 4. RF Exposure Limits ··········································································································· 9 4.1. Uncontrolled Environment ····························································································· 9 4.2. Controlled Environment ································································································· 9 5. Applied Reference Documents ······················································································ 10 6. SAR Measurement System ····························································································· 11 6.1. E-Field Probe ················································································································· 12 6.2. Data Acquisition Electronics (DAE) ············································································ 13 6.3. Robot ······························································································································ 13 6.4. Measurement Server ····································································································· 14 6.5. Light Beam Unit ············································································································· 14 6.6. Phantom ························································································································· 14 6.7. Device Holder ················································································································ 15 6.8. Data Storage and Evaluation ······················································································· 16 6.9. Test Equipment List ······································································································ 18 7. Tissue Simulating Liquids ······························································································ 19 8. SAR System Verification ································································································· 21 8.1. Purpose of System Performance Check ···································································· 21 8.2. System Setup ················································································································· 21 MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL.1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] REPORT No.：SZ26010081S01 Page 3 of 41 8.3. Validation Results ········································································································· 22 9. EUT Testing Position ······································································································· 24 9.1. Body-worn Configurations ·························································································· 24 9.2. Hotspot Mode Exposure Position Conditions ·························································· 24 10. Measurement Procedures ······························································································· 25 10.1. Spatial Peak SAR Evaluation ······················································································· 26 10.2. Power Reference Measurement ·················································································· 26 10.3. Area Scan Procedures ·································································································· 26 10.4. Zoom Scan P…

Text truncated - open the document above for the full version.

E.S Antenna Design & Mobile Phone OTA (CTIA) 深圳市东信通电子科技有限公司 ShenZhen Eastong Electronic technology Co., LTD Test Report design for :领为创新AG66 2025-11-10 日期 版本状况 2025-11-10AFPC 1 概述 .................................................................................................................1-2 2 项目描述............................................................................................................ 1-2 3调试设置3 3.1驻波(VSWR)和回波反射(Return Loss)3 3.2 TRP/TRS 使用 Agilent8960(5515C)、8011 在 ETS 7m×4m×4m 3D暗室里面测试的。3 3.3匹配电路(Matching Circuit Description)3 4 Effective Radiated Power Summation (TRP)3 5 E ffective Isotopic Sensitivity Summation (TIS)4 6 环境处理 深圳市东信通电子科技有限公司 2025-11-10 1 概述 此报告主要用于描述《东信通电子》给《AG66》项目测试的天线的参数说明。 2项目描述 项目名：《AG66》, 机型： 频段： WIFI 天线形式：做成PIFA天线形式。 3调试设置 3.1驻波(VSWR)和回波反射(Return Loss) VSWR是使用安捷伦E5062B连接到手机制具来测试，状态为自由空间。 3.2 TRP/TRS 使用 Agilent8960(5515C) 在 ETS 7m×4m×4m 3D暗室里面测试的。 深圳市东信通电子科技有限公司 深圳市东信通电子科技有限公司 2025-11-10 2、先进技术设备 2025-11-10 匹配电路(Matching Circuit Description) Antenna RF Module E1 E2 E3 E4 ElementValueVender E1(0402) E2(0402) E3(0402) E4(0402) 原匹配 深圳市东信通电子科技有限公司 2025-11-10 测试参数 2.4G FreqEffiGainGain (MHz)(%)(dBi)(dBd) 240033.72.490.34 245030.943.821.67 250029.935.683.53 2025-11-10 测试参数 5G FreqEffiGainGain (MHz)(%)(dBi)(dBd) 505026.560.43-1.72 545029.573.411.26 585028.652.290.14 感谢贵司大力支持！ 深圳市东信通电子科技有限公司 2025-11-10

NOTE: This document is issued by Shenzhen Morlab Communications Technology Co., Ltd., the test report shall not be reproduced except in full without prior written permission of the company. The test results apply only to the particular sample(s) tested and to the specific tests carried out which is available on request for validation and information confirmed at our website. MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL.1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen, GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] Page 1 of 76 REPORT No.：SZ26010081W01 TEST REPORT APPLICANT : TESEE INC. PRODUCT NAME : Smart Glasses MODEL NAME : T1 BRAND NAME : Tesee FCC ID : 2BV28-TESEET1 STANDARD(S) : 47 CFR Part 15 Subpart C RECEIPT DATE : 2026-02-04 TEST DATE : 2026-03-06 to 2026-04-23 ISSUE DATE : 2026-06-16 Edited by: Zeng Xiaoying (Rapporteur) Approved by: Shen Junsheng (Supervisor) MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL.1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen, GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] Page 2 of 76 REPORT No.：SZ26010081W01 DIRECTORY 1. Summary of Test Result ꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏ 4 1.1. Testing Applied Standards ꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏ 4 1.2. Test Equipment List ꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏ 5 1.3. Measurement Uncertainty ꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏ 7 1.4. Testing Laboratory ꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏ 7 2. General Description ꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏ 8 2.1. Information of Applicant and Manufacturer ꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏ 8 2.2. Information of EUT ꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏ 8 2.3. Channel List of EUT ꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏ 9 2.4. Test Configuration of EUT ꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏ 10 2.5. Test Conditions ꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏ 10 2.6. Test Setup Layout Diagram ꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏ 10 3. Test Results ꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏ 13 3.1. Antenna Requirement ꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏ 13 3.2. Duty Cycle of Test Signal ꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏ 14 3.3. Maximum Peak Conducted Output Power ꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏ 15 3.4. Maximum Average Conducted Output Power ꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏ 16 3.5. 6 dB Bandwidth ꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏ 17 3.6. Conducted Spurious Emissions and Band Edge ꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏ 18 3.7. Power Spectral Density ꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏ 19 3.8. Conducted Emission ꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏ 20 3.9. Restricted Frequency Bands ꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏ 21 3.10. Radiated Emission ꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏ 22 Annex A Test Data and Result ꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏ 24 Notes ꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏ 76 MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL.1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen, GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] Page 3 of 76 REPORT No.：SZ26010081W01 Change History Version Date Reason for change 1.0 2026-06-16 First edition MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL.1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen, GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] Page 4 of 76 REPORT No.：SZ26010081W01 1. Summary of Test Result No. Section Description Test Date Test Engineer Result Remark 1 15.203 Antenna Requirement N/A N/A PASS / 2 N/A Duty Cycle of Test Signal Mar. 16, 2026Lin Haoyang PASS / 3 15.247(b) Maximum Peak Conducted Output Power Mar. 16, 2026Lin Haoyang PASS / 4 15.247(b) Maximum Average Conducted Output Power Mar. 16, 2026Lin Haoyang PASS / 5 15.247(a) Bandwidth Mar. 16, 2026Lin Haoyang PASS / 6 15.247(d) Conducted Spurious Emission and Band Edge Mar. 16, 2026Lin Haoyang PASS / 7 15.247(e) Power Spectral Density Mar. 16, 2026Lin Haoyang PASS / 8 15.207 Conducted Emission Mar. 10, 2026 Wang Yapeng PASS / 9 15.247(d) Restricted Frequency Bands Mar. 19, 2026Li Hanbin PASS / 10 15.209, 15.247(d) Radiated Emission Mar. 19, 2026Li Hanbin PASS / Note 1: The tests were performed according to the method of measurements prescribed in ANSI C63.10-2020 and KDB 558074 D01 v05r02. Note 2: Any additions, deviation, or exclusions from the method shall be noted in the “Remark”. 1.1. Testing Applied Standards According to the specifications of the manufacturer, the EUT must comply with the requirements of the following standards:  47 CFR Part 15 Subpart C Radio Frequency Devices MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL.1-3, Building A, FeiYang Science Park, No.8 LongC…

Text truncated - open the document above for the full version.