2BV6M-1929849FALL 10in Squish Light with Snoring Sound

ENGLISH: USER MANUAL — SNORING BUDDY INTRODUCTION Thank you for purchasing the Snoring Buddies! This soft, vibrant, and customizable LED light adds fun and comfort to any room. Please read this manual carefully to ensure safe and proper use. PACKAGE CONTENTS - 1x Snoring Buddy Night Light - 1x Remote Control - 1x USB Charging Cable Included (4.9 ft (150 cm) USB cable - included) - 1x User Manual PRODUCT FEATURES -Snoring Motion Belly The animal’s soft silicone belly/back gently rises and falls to imitate natural breathing movements, accompanied by soothing snoring sounds for a calming and comforting sleep experience. - 9 Built-in Sounds Ocean, Cave Drip, White Noise,Crackling Fire, Crickets, Peaceful Ambience, Birdsong, Lullaby, Forest Night - Bluetooth® Wireless Speaker Connect via Bluetooth® wirelessly to your smart device and play music. - Choose from 16 vibrant colors - Adjustable brightness levels - Pat Function: Gently pat the Snoring Buddy to change the color mode. - Auto-Off Timer: 30/60/90 minute auto-off feature helps save battery - Use the remote to operate Snoring Buddy - Usage Time: Estimated usage time: 6-7 hours on a full charge (depending on brightness) - Charging Time: Estimated charging time: 3 hours PRODUCT SPECIFICATIONS - Material: High-quality, silicone - Light Source: RGB LED with 16 color options - Modes: 16 Static colors, dimmable - Pat function: to change colors - Bluetooth Version: v5.1 - Input: USB Type-C - Power Supply: • 1200 mAh rechargeable lithium ion battery • USB charging (4.9 ft (150 cm) USB cable - included) • Remote control powered by 2x AAA batteries (not included) • Color Temperature: 6000K/RGB BASE OF SNORING BUDDY BUTTONS z z z 30 60 90 CONTROL BUTTONS: “–” Button Long press: Decrease the volume. Short press: Return to the previous track. “+” Button Long press: Increase the volume. Short press: Skip to the next track. “ “ Button Short press: Set the timer to 30, 60, or 90 minutes, or turn the timer off. The corresponding indicator light will illuminate. “ “ Button Short press: Play white noise. Press again briefly to pause playback. Long press: Turn on Bluetooth® mode. “ “ Button Long press: Turn the device on or off. The white light turns on automatically when powered on and is set to 50% brightness by default. “ “ Button Short press: Turn Snoring Mode on or off. When activated, the motor creates a gentle snoring motion and sound effect. Speaker Timer Indicator Control Buttons z z z USING THE REMOTE Switch Between Snoring & Bluetooth® Mode Lighting Color Control Sounds & Volume Control Timer Control White Light Power & Brightness 2 x AAA Batteries (not included) ATTENTION: The Snoring Buddy unit must be powered on before the remote control can be used. Long press to turn the device on or off; short press to adjust the brightness. Short press to switch between white noise/music ; long press to adjust the volume. Short press to play or pause the white noise/music. Short press to switch between white noise/music; long press to adjust the volume. RGB light colors corresponding to the colors on the remote control buttons. White light mode 30-minute timer 60-minute timer 90-minute timer Short press to turn on/off snoring mode; long press to activate Bluetooth® Mode. INSERT REMOTE BATTERIES To use the included remote you must first insert 2 x AAA batteries (not included) into the remote’s battery compartment. 1. Open the battery compartment located on the rear of the remote. 2. Insert 2 x AAA batteries. Make sure to insert the batteries with the correct polarity(+ -) as displayed in the battery compartment. BATTERY WARNING: - Keep batteries out of reach of children. - Do not mix old and new batteries or different types (e.g., alkaline, standard, or rechargeable). - Insert batteries with correct polarity (+/−). - Do not short-circuit, recharge, disassemble, or dispose of in fire. - Replace all batteries at the same time. - Remove batteries if the product will not be used for an extended period of time. - Dispose of used batteries promptly and in accordance with local regulations. - Do not incinerate. W 30 60 90 z z z PAT FUNCTION CONNECT TO BLUETOOTH® Pat Snoring Buddy to change light colors. ATTENTION: To help extend the product’s lifespan, avoid pressing or tapping directly on the moving belly/back area during operation. 1. Turn on the speaker, activate bluetooth® mode using remote or control panel at the base. 2. Enable Bluetooth® on your device. 3. Open your device’s Bluetooth® settings and select “Snoring Buddy” from the list. 4. Once connected, you will hear a confirmation sound or see the device marked as “Connected.” Note: If the speaker does not appear, make sure it is in pairing mode and try searching again. - Plug the USB-C charging cable into the USB-C charging port at the bottom of the Snoring Buddy. - Insert the other end of the USB cable into a suitable USB charging adapter (not included) - While charging the charging indicator light will turn red. When fully charged the indicator light will turn green. ATTENTION: Make sure the product is fully charged before first use. USB-C Charging Port CHARGING z z z 30 60 90 Power Supply: The power source should meet limited power source or PS2 requirements according to IEC 62368-1 Standard. BATTERY WARNING - The device is equipped with an integrated lithium battery. The battery cannot be replaced. Do not attempt to remove the battery from the device. - Do not dispose of in fire or expose to excessive heat. - Do not crush, puncture, incinerate, or short circuit external contacts. - Please recycle or dispose of the battery properly. Contact your local recycling facilities and/or the manufacturer for further information. SAFETY & MAINTENANCE - Do not disassemble the light or battery - Avoid immersing in water - Clean with a soft, damp cloth only - Keep out of direct sunlight for prolonged periods TROUBLESHOOTING Issue Solution ------------------------------------------------------ ---------------------…

Text truncated - open the document above for the full version.

MCG Innovations Inc Current Date: 2026-06-30 To: Compliance Certification Services (Kunshan) Inc. No.10 Weiye Rd, Innovation park, Eco&Tec, Development Zone, Kunshan City, Jiangsu, China. Dear Sir/Madam, Subject: Declaration Letter about Identity of Products *WE (MCG Innovations Inc) HEREBY DECLARED THAT Product Description FALL 10in Squish Light with Snoring Sound Model No. 1929849-810182224251, 1929849-810182224213, 1929849-810182224220, 1929849-810182224237 Manufacturer’s Name Shenzhen Golden Trees Technology Co.ltd Manufacturer’s Address No.3, Nan Tong Blvd, Bao Long Industrial Area, LongGang District Shenzhen, Guangdong 518116 China *Except that the model number and appearance, other are identical with the original product as follows: Note: The definition of identical should be “electrically identical”. A device will be considered to be electrically identical if no changes are made to the devices’ schematics, board layouts, component layouts, chip sets, resistors and all other electrical aspects of the device are identical. with the model(s) below which samples we chose to be tested by SGS Model No.: 1929849-810182224244 Manufacturer’s Name: Shenzhen Golden Trees Technology Co.ltd Manufacturer’s Address: No.3, Nan Tong Blvd, Bao Long Industrial Area, LongGang District Shenzhen, Guangdong 518116 China Sincerely, Signature: Printed Name: roy Koby cohen Position/Title: owner Contact Number: (646) 775-5186

Compliance Certification Services (Kunshan) Inc. Page: 1 of 17 External Photos for KSCR2606001433AT Compliance Certification Services (Kunshan) Inc. Page: 2 of 17 EUT Constructional Details (EUT Photos) Compliance Certification Services (Kunshan) Inc. Page: 3 of 17 Compliance Certification Services (Kunshan) Inc. Page: 4 of 17 Compliance Certification Services (Kunshan) Inc. Page: 5 of 17 Compliance Certification Services (Kunshan) Inc. Page: 6 of 17 Compliance Certification Services (Kunshan) Inc. Page: 7 of 17 Compliance Certification Services (Kunshan) Inc. Page: 8 of 17 Compliance Certification Services (Kunshan) Inc. Page: 9 of 17 Compliance Certification Services (Kunshan) Inc. Page: 10 of 17 Compliance Certification Services (Kunshan) Inc. Page: 11 of 17 Compliance Certification Services (Kunshan) Inc. Page: 12 of 17 Compliance Certification Services (Kunshan) Inc. Page: 13 of 17 Compliance Certification Services (Kunshan) Inc. Page: 14 of 17 Compliance Certification Services (Kunshan) Inc. Page: 15 of 17 Compliance Certification Services (Kunshan) Inc. Page: 16 of 17 Compliance Certification Services (Kunshan) Inc. Page: 17 of 17 - End of the Appendix -

Compliance Certification Services (Kunshan) Inc. Page: 1 of 6 Internal Photos for KSCR2606001433AT Compliance Certification Services (Kunshan) Inc. Page: 2 of 6 EUT Constructional Details (EUT Photos) Compliance Certification Services (Kunshan) Inc. Page: 3 of 6 Compliance Certification Services (Kunshan) Inc. Page: 4 of 6 Compliance Certification Services (Kunshan) Inc. Page: 5 of 6 Compliance Certification Services (Kunshan) Inc. Page: 6 of 6 - End of the Appendix -

Report No.: KSCR260600143303 Page: 1 of 11 TRF No. CONN_001 A_Jun 1st ,2026 1 Cover Page RF Exposure Evaluation Report Application No.: KSCR2606001433AT FCC ID: 2BV6M-1929849 Applicant: MCG INNOVATIONS INC Address of Applicant: 22 Meridian Road Unit 1 Eatontown, NJ 07724 U.S.A Manufacturer: Shenzhen Golden Trees Technology Co.ltd Address of Manufacturer: No.3, Nan Tong Blvd, Bao Long Industrial Area, LongGang District Shenzhen, Guangdong 518116 China Factory: Shenzhen Golden Trees Technology Co.ltd Address of Factory: No.3, Nan Tong Blvd, Bao Long Industrial Area, LongGang District Shenzhen, Guangdong 518116 China Equipment Under Test (EUT): EUT Name: FALL 10in Squish Light with Snoring Sound Model No.: 1929849-810182224244, 1929849-810182224251, 1929849-810182224213, 1929849-810182224220, 1929849-810182224237 Standard(s) : FCC Rules 47 CFR §2.1093 KDB 447498 D04 interim General RF Exposure Guidance v01 Date of Receipt: 2026-06-08 Date of Test: 2026-06-09 to 2026-06-30 Date of Issue: 2026-07-01 Test Result: Pass* * In the configuration tested, the EUT complied with the standards specified above. Report No.: KSCR260600143303 Page: 2 of 11 TRF No. CONN_001 A_Jun 1st ,2026 Revision Record Version Description Date Remark 00 Original 2026-07-01 / Authorized for issue by: Prepared By Damon Zhou/Project Engineer Approved By Terry Hou /Reviewer Report No.: KSCR260600143303 Page: 3 of 11 TRF No. CONN_001 A_Jun 1st ,2026 2 Contents Page 1 Cover Page .................................................................................................................................. 1 2 Contents ...................................................................................................................................... 3 3 General Information..................................................................................................................... 4 3.1 General Description of E.U.T. ................................................................................................ 4 3.2 Details of E.U.T. .................................................................................................................... 4 3.3 Separation Distance .............................................................................................................. 4 3.4 Test Location ........................................................................................................................ 5 3.5 Test Facility ........................................................................................................................... 5 4 Test Standards and Limits .......................................................................................................... 6 5 FCC Radiofrequency radiation exposure limits ......................................................................... 6 5.1 RF Exposure Test Exemptions for single RF sources ............................................................ 6 5.1.1 Blanket 1 mW Blanket Exemption .................................................................................. 6 5.1.2 MPE-based Exemption .................................................................................................... 6 5.1.3 SAR-based Exemption .................................................................................................... 7 5.2 RF Exposure Test Exemptions for Simultaneous Transmission.............................................. 8 6 Measurement and Calculation .................................................................................................. 10 6.1 Maximum transmit power .................................................................................................... 10 6.2 RF Exposure Calculation ..................................................................................................... 11 Report No.: KSCR260600143303 Page: 4 of 11 TRF No. CONN_001 A_Jun 1st ,2026 3 General Information 3.1 General Description of E.U.T. Power supply: DC 3.7V 1200mAh Rechargeable battery Product Type: Portable device Mobile device Fixed device 3.2 Details of E.U.T. BT Operation Frequency: 2402MHz to 2480MHz Modulation Type: GFSK, pi/4DQPSK, 8DPSK Number of Channels: 79 Channel Spacing: 1MHz Spectrum Spread Technology: Frequency Hopping Spread Spectrum (FHSS) Antenna Type: PCB Antenna Antenna Gain: -1.82dBi (Provided by manufacturer) BLE Operation Frequency: 2402MHz to 2480MHz Modulation Type: GFSK Number of Channels: 40 Channel Spacing: 2MHz Antenna Type: PCB Antenna Antenna Gain: -1.82dBi (Provided by manufacturer) 3.3 Separation Distance Separation distance between the antenna to person (R): ＜5mm Remark: This minimum test separation distance is determined by the smallest distance from the antenna and radiating structures or outer surface of the device, according to the host form factor, exposure conditions and platform requirements, to any part of the body or extremity of a user or bystander. Report No.: KSCR260600143303 Page: 5 of 11 TRF No. CONN_001 A_Jun 1st ,2026 3.4 Test Location All tests were performed at: Compliance Certification Services (Kunshan) Inc. No.10 Weiye Rd, Innovation park, Eco&Tec, Development Zone, Kunshan City, Jiangsu, China. Tel: +86 512 5735 5888 Fax: +86 512 5737 0818 No tests were sub-contracted. Note: 1. SGS is not responsible for wrong test results due to incorrect information (e.g. max. clock frequency, highest internal frequency, antenna gain, cable loss, etc ) is provided by the applicant. (if applicable). 2. SGS is not responsible for the authenticity, integrity and the validity of the conclusion based on results of the data provided by applicant. (if applicable). 3. Sample source: sent by customer. 3.5 Test Facility The test facility is recognized, certified, or accredited by the following organizations: • A2LA (Certificate No. 2541.01) Compliance Certification Services (Kunshan) Inc. is accredited by the American Association for Laboratory Accreditation (A2LA). • FCC (Designation Numb…

Text truncated - open the document above for the full version.

` SGS-CSTC Standards Technical Services (Suzhou) Co., Ltd Report No.: SUOA2606000128AT01 Rev.: 01 Page: 1 of 16 TRF No.SUZSCONN-TRF-OA006_A_Jun1 st ,2026 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspxand, for electronic format documents, subject to Terms and Conditions for Electronic Documents athttp://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. South of No. 6 Plant, No. 1, RunSheng Road, Suzhou Industrial Park, Suzhou Area, China (Jiangsu) Pilot Free Trade Zone215123 t (86-512) 6229 2980 www.sgsgroup.com.cn SGS-CSTC Standards Technical Services (Suzhou) Co., Ltd. ConnectivityLaboratory Member of the SGS Group （SGS SA） ANTENNA PASSIVE TEST REPORT Application No.SUOA2606000128AT ApplicantMCG INNOVATIONS Inc. ManufacturerShenzhen Jinxiang Electronics Co., Ltd. Type NamePCB Board Model No.JL-PA 01 StandardsIEEE Std149-2021 Date Initial Sample(s) ReceivedJune 15, 2026 Testing Start DateJune 15, 2026 Testing Finish DateJune 15, 2026 Report Issue DateJune 24, 2026 *In the configuration tested, the EUT complied with the standards specified above. Prepared by：ABC (Name of signatory)/ Project Engineer (Title) Approved by：ABC (Name of signatory)/ Technical Manager (Title) ` SGS-CSTC Standards Technical Services (Suzhou) Co., Ltd Report No.: SUOA2606000128AT01 Rev.:01 Page: 2 of 16 TRF No.SUZSCONN-TRF-OA006_A_Jun1 st ,2026 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspxand, for electronic format documents, subject to Terms and Conditions for Electronic Documents athttp://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. South of No. 6 Plant, No. 1, RunSheng Road, Suzhou Industrial Park, Suzhou Area, China (Jiangsu) Pilot Free Trade Zone215123 t (86-512) 6229 2980 www.sgsgroup.com.cn SGS-CSTC Standards Technical Services (Suzhou) Co., Ltd. ConnectivityLaboratory Member of the SGS Group （SGS SA） Revision History RevisionIssue DateDescription 01June 24, 2026Initial creation of report ` SGS-CSTC Standards Technical Services (Suzhou) Co., Ltd Report No.: SUOA2606000128AT01 Rev.:01 Page: 3 of 16 TRF No.SUZSCONN-TRF-OA006_A_Jun1 st ,2026 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspxand, for electronic format documents, subject to Terms and Conditions for Electronic Documents athttp://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. South of No. 6 Plant, No. 1, RunSheng Road, Suzhou Industrial Park, Suzhou Area, China (Jiangsu) Pilot Free Trade Zone215123 t (86-512) 6229 2980 www.sgsgroup.com.cn SGS-CSTC Standards Technical Services (Suzhou) Co., Ltd. ConnectivityLaboratory Member of the SGS Group （SGS SA） Table of Contents Revision History....................................................................................................................................2 1General Information..................................................…

Text truncated - open the document above for the full version.

Report No.: KSCR260600143302 Page: 1 of 83 TRF No. CONN_001 A_Jun 1st ,2026 TEST REPORT Application No.: KSCR2606001433AT FCC ID: 2BV6M-1929849 Applicant: MCG INNOVATIONS INC Address of Applicant: 22 Meridian Road Unit 1 Eatontown, NJ 07724 U.S.A Manufacturer: Shenzhen Golden Trees Technology Co.ltd Address of Manufacturer: No.3, Nan Tong Blvd, Bao Long Industrial Area, LongGang District Shenzhen, Guangdong 518116 China Factory: Shenzhen Golden Trees Technology Co.ltd Address of Factory: No.3, Nan Tong Blvd, Bao Long Industrial Area, LongGang District Shenzhen, Guangdong 518116 China Equipment Under Test (EUT): EUT Name: FALL 10in Squish Light with Snoring Sound Model No.: 1929849-810182224244, 1929849-810182224251, 1929849-810182224213, 1929849-810182224220, 1929849-810182224237 Remark: Please refer to section 2 of this report which indicates which model was actually tested and which were electrically identical. Standard(s) : 47 CFR Part 15, Subpart C 15.247 Date of Receipt: 2026-06-08 Date of Test: 2026-06-09 to 2026-06-30 Date of Issue: 2026-07-01 Test Result: Pass* * In the configuration tested, the EUT complied with the standards specified above. Report No.: KSCR260600143302 Page: 2 of 83 TRF No. CONN_001 A_Jun 1st ,2026 Revision Record Version Description Date Remark 00 Original 2026-07-01 / Authorized for issue by: Prepared By Damon Zhou/Project Engineer Approved By Terry Hou /Reviewer Report No.: KSCR260600143302 Page: 3 of 83 TRF No. CONN_001 A_Jun 1st ,2026 2 Test Summary Radio Spectrum Technical Requirement Item Standard Method Requirement Result Antenna Requirement 47 CFR Part 15, Subpart C 15.247 N/A 47 CFR Part 15, Subpart C 15.203 & 15.247(b)(4) Pass Radio Spectrum Matter Part Item Standard Method Requirement Result Conducted Emissions at AC Power Line (150kHz-30MHz) 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2020) Section 6.2 47 CFR Part 15, Subpart C 15.207 Pass Radiated Emissions which fall in the restricted bands ANSI C63.10 (2020) Section 6.10.5 & 11.12 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Radiated Spurious Emissions Below 1GHz ANSI C63.10 (2020) Section 6.4,6.5 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Radiated Spurious Emissions Above 1GHz ANSI C63.10 (2020) Section 6.6 & 11.12 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Maximum Conducted Output Power ANSI C63.10 (2020) Section 11.9.1 47 CFR Part 15, Subpart C 15.247(b)(3) Pass Minimum 6dB Bandwidth ANSI C63.10 (2020) Section 11.8.1 47 CFR Part 15, Subpart C 15.247a(2) Pass Power Spectral Density ANSI C63.10 (2020) Section 11.10.3 47 CFR Part 15, Subpart C 15.247(e) Pass Conducted Band Edges Measurement ANSI C63.10 (2020) Section 6.10.4 47 CFR Part 15, Subpart C 15.247(d) Pass Conducted Spurious Emissions ANSI C63.10 (2020) Section 11.11 47 CFR Part 15, Subpart C 15.247(d) Pass Note: There are series models mentioned in this report, and they are the similar in electrical and electronic characters. Only the model 1929849-810182224244 was tested since their differences were the model number and appearance. Report No.: KSCR260600143302 Page: 4 of 83 TRF No. CONN_001 A_Jun 1st ,2026 3 Contents Page 1 COVER PAGE ..................................................................................................................................... 1 2 Test Summary .................................................................................................................................... 3 3 Contents ............................................................................................................................................ 4 4 General Information........................................................................................................................... 5 4.1 Details of E.U.T. .......................................................................................................................... 5 4.2 Description of Support Units ........................................................................................................ 5 4.3 Power level setting using in test................................................................................................... 5 4.4 Measurement Uncertainty ........................................................................................................... 5 4.5 Test Location .............................................................................................................................. 6 4.6 Test Facility ................................................................................................................................. 6 4.7 Deviation from Standards ............................................................................................................ 6 4.8 Abnormalities from Standard Conditions ...................................................................................... 6 5 Equipment List .................................................................................................................................. 7 6 Radio Spectrum Technical Requirement .......................................................................................... 9 6.1 Antenna Requirement ................................................................................................................. 9 7 Radio Spectrum Matter Test Results ...............................................................................................10 7.1 Conducted Emissions at AC Power Line (150kHz-30MHz) .........................................................10 7.2 Radiated Emissions which fall in the restricted bands .................................................................14 7.3 Radiated Spurious Emissions Below 1GHz .................................................................................33 7.4 Radiated Spurious Emissions Above 1GHz ................................................................................37 7.5 Maximum Conducted Output Power ....................................…

Text truncated - open the document above for the full version.

Compliance Certification Services (Kunshan) Inc. Page: 1 of 3 Appendix Photographs of Test Setup for KSCR2606001433AT Test Model No.: 1929849-810182224244 Compliance Certification Services (Kunshan) Inc. Page: 2 of 3 Test Setup Photo Conducted Emissions at Mains Terminals (9kHz-30MHz) RF Conducted Compliance Certification Services (Kunshan) Inc. Page: 3 of 3 Radiated Spurious Emissions below 1GHz Radiated Spurious Emissions above 1GHz - End of the Appendix -