2BV7L-FINDSUPMagnetic Wallet

F i n d S U P Findmy Product Instruction 1.Quickinstructions 1、Turnonthedevice:pressandholdthebuttonfor5seconds,thedevicewillbeepandturn on.(Howtoconfirmwhetherthedevicehasbeenturnedon:double-clickthedevicebutton, thedevicewillsound,whichmeansthatthedevicehasbeenturnedon,andthereisnoneed torestartit) 2、OpentheAPPthatcomeswiththeApplemobilephonesystem:Findmy; 3、Choose：Items; 4、Choose：AddNewItem; 5、Choose：OtherSupportedItem; 6、DuringtheSearchingItemsprocess,adevicewiththewordFind SUP will appear； 7、ClickonthedevicefoundintheAPPandnameit。 8、Afternaming,youcanusedevicefunctions: A.Ringthe device,clickPlay Sound,andthe device will emit music .B. Findmy network helps to find: When the device leaves the Bluetooth distance, it cannot be connected in the APP. You can choose Lost Mode, Enable. Enter the contact mobile phone number, etc. If there is an iPhone near the lost device, the owner’sFindmyAPPcanreceivenotificationsandthelatestlocation. 9.Deletedevice:TodeletethedeviceintheAPP,youcanselectRemoveitem. 10、After removing the device, the device will not shut down and is in the pairing state. If thereisnore-pairingwithin10minutes,thedevicewillleavethepairingstate.Ifyouneedto pair a device at this time, you need to press and hold the device button for 5 seconds, the device will sound. At this time, the device enters the pairing state and can bepairedwiththeAPPagain. 2 . Instructionsfordeviceoperation 1. Device enters turned on mode from shutdown sleep mode: If the device is in shutdown sleep mode,press and hold the button for five seconds, thedeviceplay a “turned on” sound,thedeviceisturnedon. 2. Device status confirmation: Double-click the device button twice, the deviceplays a “ working” sound, indicating that the device is in turned onmode. If the device does notsound, the device is in shutdown sleep mode. Press and hold thebuttonforfivesecondstoturnon. Note: 1、 TCP005MaxConnectionis2。 2、 ForTCB002,step7,whethertheaccessorywillrespondwithaninvalidstateerrorornot respond at all if the Firmware Update characteristic is written to while the accessory is connectedtoanon-owner? “The accessory will respond with an ATT error (BT_ATT_ERR_WRITE_NOT_PERMITTED) if the non-owner writes to the Firmware Update characteristic. Essentially, it means that only the 4. Factory Reset:Press the button 4 times. Wait for the beeps, then immediately press & 3. Pairing mode timeout, the device enters the pairing mode again: After removing the device in the app, the device will play a soun, it will not shut down and is in the pairing mode. If there is no re-pairing within 10 minutes, the device will leave the pairing mode (the device cannot be paired with the Find My APP at this time). If youneed topair the device,you need to press and hold the device button for 5 seconds, the device will sound. At this time, the device enters the pairing modeandcanbepairedwiththeFindMyAPPagain. hold the button for 8 seconds. 6.Device enters shutdown sleep mode from turned on mode: When device is in turned on mode, press the device button 5 times in 2 seconds, the device plays a “shutdown” sound 5.Get Serial Number: Quickly press the button six times. Six confirmation beeps will soun d and the light will blink six times. ,thedeviceentersshutdownsleepmode. ownercanperformtheDFU.” This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Covered Equipment Attestation Letter For Certification Service in the USA Federal Communications Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 To whom it may concern Pursuant to Section 2.911(d)(5)(i)-(ii) of the Commission’s Rules (47 C.F.R.) we attest as follows for the product listed below: FCC ID Model name 2BV7L-FINDSUP Find SUP We, Applicant Company Name: SHENZHEN XINGZHE TECHNOLOGY CO., LTD. Address: Room C, 5 Floor, Block A, Central Great Searching Building, Baoyuang Road, Bao'an District, Shenzhen 518000, China Phone: +86-15012985232 certify that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. This includes the cybersecurity and anti-virus software produced or provided by Kaspersky Lab, Inc. or any of ist successors and assignees. We certify that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. If you have any questions, please feel free to contact us at the address shown below. Sincerely, 2026-06-08 Signature Date Name / Title: Tao Wang / Product Manager Company: SHENZHEN XINGZHE TECHNOLOGY CO., LTD. Address: Room C, 5 Floor, Block A, Central Great Searching Building, Baoyuang Road, Bao'an District, Shenzhen 518000, China Phone: +86-15012985232 Fax: +86-755-23225858 E-Mail: [email protected]

Due Diligence Letter For Certification Service in the USA Federal Communications Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 To whom it may concern FCC ID Model name 2BV7L-FINDSUP Find SUP Pursuant to KDB 986446 D01 Covered Equipment Guidance the evaluation of the product above shows compliance for the following reasons: Compliance Evaluation process Results Inherent compliance The chipset(s) used is not capable of running the cybersecurity and/or anti-virus software Compliance The memory used does not allow the running the cybersecurity and/or anti-virus software Compliance The storage capacity does not allow the running the cybersecurity and/or anti-virus software Compliance The operating system used is not capable of running the cybersecurity and/or anti-virus software Compliance No inherent compliance Based on software bill of material Based on scan for running software on the device Based on filesystem scan for cybersecurity and/or anti-virus software The equipment for which authorization is sought complies with the rules and fulfils the requirements as detailed in the above mentioned KDB. Evaluation performed by Company Name: Shenzhen LCS Compliance Testing Laboratory Ltd. Contact Name: Martion Lee Address: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Phone: +86-755-82591330 Email: [email protected] Signature: Date: 2026-06-06

Confidentiality Request Letter For Certification Service in the USA Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 To whom it may concern Pursuant to Paragraphs §0.457 and 0.459 of the Commission’s Rules (47 C.F.R.) and Section §552(b)(4) of the Freedom of Information Act, we request confidentiality for the documentation of the following products: FCC ID Model name 2BV7L-FINDSUP Find SUP For the products listed above, we request permanent confidentiality for all applicable exhibits as there are: • the Operational Description • the Block Diagram • the Schematics • the Part List • the Tune up Information The above listed exhibits contain trade secrets and proprietary information that could be of benefit to our competitors. If you have any questions, please feel free to contact us at the address shown below. Sincerely, 2026-06-08 Signature Date Name / Title: Tao Wang / Product Manager Company: SHENZHEN XINGZHE TECHNOLOGY CO., LTD. Address: Room C, 5 Floor, Block A, Central Great Searching Building, Baoyuang Road, Bao'an District, Shenzhen 518000, China Phone: +86-15012985232 Fax: +86-755-23225858 E-Mail: [email protected]

Page1of4FCCID:2BV7L-FINDSUP GuangzhouLCSComplianceTestingLaboratoryLtd. Add:No.44-1,QianfengNorthRoad,Shiqi,PanyuDistrict,Guangzhou,Guangdong,China Tel:+(86)020-39166689|E-mail:[email protected]|Web:www.lcs-cert.com ExternalPhotosoftheEUT Fig.1 Fig.2 Page2of4FCCID:2BV7L-FINDSUP GuangzhouLCSComplianceTestingLaboratoryLtd. Add:No.44-1,QianfengNorthRoad,Shiqi,PanyuDistrict,Guangzhou,Guangdong,China Tel:+(86)020-39166689|E-mail:[email protected]|Web:www.lcs-cert.com Fig.3 Fig.4 Page3of4FCCID:2BV7L-FINDSUP GuangzhouLCSComplianceTestingLaboratoryLtd. Add:No.44-1,QianfengNorthRoad,Shiqi,PanyuDistrict,Guangzhou,Guangdong,China Tel:+(86)020-39166689|E-mail:[email protected]|Web:www.lcs-cert.com Fig.5 Fig.6 Page4of4FCCID:2BV7L-FINDSUP GuangzhouLCSComplianceTestingLaboratoryLtd. Add:No.44-1,QianfengNorthRoad,Shiqi,PanyuDistrict,Guangzhou,Guangdong,China Tel:+(86)020-39166689|E-mail:[email protected]|Web:www.lcs-cert.com Fig.7

Page1of1FCCID:2BV7L-FINDSUP GuangzhouLCSComplianceTestingLaboratoryLtd. Add:No.44-1,QianfengNorthRoad,Shiqi,PanyuDistrict,Guangzhou,Guangdong,China Tel:+(86)020-39166689|E-mail:[email protected]|Web:www.lcs-cert.com LabelandLocation (Size:L:3.0cmxW:2.0cm) LabelLocation MagneticWallet Model:FindSUP FCCID:2BV7L-FINDSUP

Page 1 of 6 FCC ID: 2BV7L-FINDSUP Guangzhou LCS Compliance Testing Laboratory Ltd. Add: No.44-1, Qianfeng North Road, Shiqi, Panyu District, Guangzhou, Guangdong, China Tel: +(86) 020-39166689 | E-mail: [email protected] | Web: www.lcs-cert.com Internal Photos of the EUT Fig. 1 Fig. 2 Page 2 of 6 FCC ID: 2BV7L-FINDSUP Guangzhou LCS Compliance Testing Laboratory Ltd. Add: No.44-1, Qianfeng North Road, Shiqi, Panyu District, Guangzhou, Guangdong, China Tel: +(86) 020-39166689 | E-mail: [email protected] | Web: www.lcs-cert.com Fig. 3 Fig. 4 Page 3 of 6 FCC ID: 2BV7L-FINDSUP Guangzhou LCS Compliance Testing Laboratory Ltd. Add: No.44-1, Qianfeng North Road, Shiqi, Panyu District, Guangzhou, Guangdong, China Tel: +(86) 020-39166689 | E-mail: [email protected] | Web: www.lcs-cert.com Fig. 5 Fig. 6 Page 4 of 6 FCC ID: 2BV7L-FINDSUP Guangzhou LCS Compliance Testing Laboratory Ltd. Add: No.44-1, Qianfeng North Road, Shiqi, Panyu District, Guangzhou, Guangdong, China Tel: +(86) 020-39166689 | E-mail: [email protected] | Web: www.lcs-cert.com Fig. 7 Fig. 8 Page 5 of 6 FCC ID: 2BV7L-FINDSUP Guangzhou LCS Compliance Testing Laboratory Ltd. Add: No.44-1, Qianfeng North Road, Shiqi, Panyu District, Guangzhou, Guangdong, China Tel: +(86) 020-39166689 | E-mail: [email protected] | Web: www.lcs-cert.com Fig. 9 Fig. 10 Bluetooth Antenna Page 6 of 6 FCC ID: 2BV7L-FINDSUP Guangzhou LCS Compliance Testing Laboratory Ltd. Add: No.44-1, Qianfeng North Road, Shiqi, Panyu District, Guangzhou, Guangdong, China Tel: +(86) 020-39166689 | E-mail: [email protected] | Web: www.lcs-cert.com Fig. 11 Fig. 12

Page 1 of 9 FCCID:2BV7L-FINDSUPReportNo.:LCSC05186046EB GuangzhouLCSComplianceTestingLaboratoryLtd. Add:No.44-1,QianfengNorthRoad,Shiqi,PanyuDistrict,Guangzhou,Guangdong,China Tel:+(86)020-39166689|E-mail:[email protected]|Web:www.lcs-cert.com RFExposureEvaluation For SHENZHENXINGZHETECHNOLOGYCO.,LTD. MagneticWallet TestModel:FindSUP Preparedfor:SHENZHENXINGZHETECHNOLOGYCO.,LTD. Address:RoomC,5Floor,BlockA,CentralGreatSearchingBuilding,Baoyuang Road,Bao’anDistrict,Shenzhen,China Preparedby:GuangzhouLCSComplianceTestingLaboratoryLtd. Address:No.44-1,QianfengNorthRoad,Shiqi,PanyuDistrict,Guangzhou, Guangdong,China Tel:(+86)020-39166689 Fax:(+86)020-39166619 Web:www.LCS-cert.com Mail:[email protected] Dateofreceiptoftestsample:May20,2026 Numberoftestedsamples:2 SampleNo.:C260520004-1,C260520004-2 Serialnumber:Prototype DateofTest:May20,2026~June05,2026 DateofReport:June06,2026 Page 2 of 9 FCCID:2BV7L-FINDSUPReportNo.:LCSC05186046EB GuangzhouLCSComplianceTestingLaboratoryLtd. Add:No.44-1,QianfengNorthRoad,Shiqi,PanyuDistrict,Guangzhou,Guangdong,China Tel:+(86)020-39166689|E-mail:[email protected]|Web:www.lcs-cert.com RFExposureEvaluation ReportReferenceNo......................:LCSC05186046EB DateofIssue.......................................:June06,2026 TestingLaboratoryName..............:GuangzhouLCSComplianceTestingLaboratoryLtd. Address................................................:No.44-1,QianfengNorthRoad,Shiqi,PanyuDistrict,Guangzhou, Guangdong,China TestingLocation/Procedure.............:FullapplicationofHarmonisedstandards■ PartialapplicationofHarmonisedstandards□ Otherstandardtestingmethod□ Applicant’sName.............................:SHENZHENXINGZHETECHNOLOGYCO.,LTD. Address................................................:RoomC,5Floor,BlockA,CentralGreatSearchingBuilding,Baoyuang Road,Bao’anDistrict,Shenzhen,China TestSpecification Standard..............................................:FCCKDBpublication447498D01GeneralRFExposureGuidance v06 FCCCFR47part11.1310 FCCCFR47part22.1093 TestReportFormNo.......................:TRF-4-E-215A/0 TRFOriginator....................................:GuangzhouLCSComplianceTestingLaboratoryLtd. MasterTRF.........................................:Dated2011-03 GuangzhouLCSComplianceTestingLaboratoryLtd.Allrightsreserved. Thispublicationmaybereproducedinwholeorinpartfornon-commercialpurposesaslongasthe GuangzhouLCSComplianceTestingLaboratoryLtd.isacknowledgedascopyrightownerandsourceofthe material.GuangzhouLCSComplianceTestingLaboratoryLtd.takesnoresponsibilityforandwillnotassume liabilityfordamagesresultingfromthereader'sinterpretationofthereproducedmaterialduetoitsplacement andcontext. TestItemDescription......................:MagneticWallet TradeMark..........................................: SUPCASE TestModel...........................................: FindSUP Ratings.................................................:PleaseRefertoPage6 Result...................................................: PASS Compiledby:Reviewedby:Approvedby: LifengLe/AdministratorJustinZhu/TechniqueDirectorGavinLiang/Manager Page 3 of 9 FCCID:2BV7L-FINDSUPReportNo.:LCSC05186046EB GuangzhouLCSComplianceTestingLaboratoryLtd. Add:No.44-1,QianfengNorthRoad,Shiqi,PanyuDistrict,Guangzhou,Guangdong,China Tel:+(86)020-39166689|E-mail:[email protected]|Web:www.lcs-cert.com RFExposureEvaluation EUT.........................................:MagneticWallet TestModel...........................:FindSUP Applicant...............................:SHENZHENXINGZHETECHNOLOGYCO.,LTD. Address..................................: RoomC,5Floor,BlockA,CentralGreatSearchingBuilding, BaoyuangRoad,Bao’anDistrict,Shenzhen,China Telephone...............................:/ Fax..........................................:/ Manufacturer.......................:ShenzhenPandaunitedTechnologyCo.,Ltd. Address...................................:2/F,Building5,TangweiFirstIndustrialPark,FuhaiStreet,Bao'an District,ShenzhenCity,GuangdongProvince,China518103 Telephone...............................:/ Fax..........................................:/ Factory.......................:ShenzhenPandaunitedTechnologyCo.,Ltd. Address...................................:2/F,Building5,TangweiFirstIndustrialPark,FuhaiStreet,Bao'an District,ShenzhenCity,GuangdongProvince,China518103 Telephone...............................:/ Fax..........................................:/ TestResultPASS Thetestreportmerelycorrespondstothetestsample. Itisnotpermittedtocopyextractsofthesetestresultwithoutthewrittenpermissionofthetestlaboratory. TestReportNo.:LCSC05186046EB June06,2026 Dateofissue Page 4 of 9 FCCID:2BV7L-FINDSUPReportNo.:LCSC05186046EB GuangzhouLCSComplianceTestingLaboratoryLtd. Add:No.44-1,QianfengNorthRoad,Shiqi,PanyuDistrict,Guangzhou,Guangdong,China Tel:+(86)020-39166689|E-mail:[email protected]|Web:www.lcs-cert.com RevisionHistory ReportVersionIssueDateRevisionContentRevisedBy 000June06,2026InitialIssue--- Page 5 of 9 FCCID:2BV7L-FINDSUPReportNo.:LCSC05186046EB GuangzhouLCSComplianceTestingLaboratoryLtd. Add:No.44-1,QianfengNorthRoad,Shiqi,PanyuDistrict,Guangzhou,Guangdong,China Tel:+(86)020-39166689|E-mail:[email protected]|Web:www.lcs-cert.com TABLEOFCONTENTS DescriptionPage 1.PRODUCTINFORMATION ..................................................................................................................................... 6 2.EVALUATIONMETHODANDLIMIT....................................................................................................................7 3.REFEREVALUATIONMETHOD ........................................................................................................................... 7 4.CONDUCTEDPOWERRESULTS ........................................................................................................................ 8 5.MANUFACTURINGTOLERANCE........................................................................................................................8 6.…

Text truncated - open the document above for the full version.

Approval sheet Page 1 of 9 ASC_RFANT3216120A5T_V05 Apr. 2010 MULTILAYER CERAMIC ANTENNA RFANT Series – RoHS Compliance 2.4 GHz ISM Band Working Frequency P/N: RFANT3216120A5T Series *Contents in this sheet are subject to change without prior notice. Address: No.566-1, Kao-Shi Road, Yang-Mei,Tao-Yuan, Taiwan, R.O.C. Approval sheet Page 2 of 9 ASC_RFANT3216120A5T_V05 Apr. 2010 FEATURES 1. Surface Mounted Devices with a small dimension of 3.2 X 1.6 X1.2 mm 3 meet future miniaturization trend. 2. LTCC process 3. High stability in Temperature / Humidity Change APPLICATIONS 1. 2.4GHz ISM band RF applications 2. Bluetooth, Wireless, HomeRF CONSTRUCTION DIMENSIONS Figure Symbol Dimension (mm) L 3.20 ± 0.20 W 1.60 ± 0.10 T 1.20 ± 0.10 a 0.25 ± 0.15 1. Feeding 2. Identification Mark 3. Soldering terminal W T E a a Approval sheet Page 3 of 9 ASC_RFANT3216120A5T_V05 Apr. 2010 Ground Soldering Pad 50 ΩTransmission Line Unit : mm 19.4 Empty Area 6x6 mm 50Ω ΩΩ ΩFeed line 45mm 20mm Series 1 Series 2 Ground Soldering Pad 50 ΩTransmission Line Unit : mm 19.4 Empty Area 6x6 mm 50Ω ΩΩ ΩFeed line 45mm 20mm Series 1 Series 2 ELECTRICAL CHARACTERISTICS RFANT3216120A5T Specification Working Frequency Range 2450 ± 50 MHz Fc (GHz) 2.9 Gain (dBi) 2 (Typical) VSWR 2 max. Series 1 6.8nH Matching component value Series 2 - Operation Temperature -40 ̊C ~ +85 ̊C * This frequency must be adjusted to 2.45GHz with matching circuit. SOLDER LAND PATTERN DESIGN Figure 1.66 0.8 2.3 1.63 6 3.43 1.6 6 1.36 0.36 0.88 0.34 1.88 1.83 0.8 0.54 1.66 0.8 2.3 1.63 6 3.43 1.6 6 1.36 0.36 0.88 0.34 1.88 1.83 0.8 0.54 Approval sheet Page 4 of 9 ASC_RFANT3216120A5T_V05 Apr. 2010 Antenna on Test Board ( Thickness 1.2mm) Antenna S11 on Test Board Antenna VSWR on Test Board E 0.8mm 1.6mm 19.4mm Empty Area 6x6 mm 50Ω ΩΩ ΩFeed line 1.66mm GROUND 0.8mm 1.6mm 19.4mm Empty Area 6x6 mm 50Ω ΩΩ ΩFeed line 1.66mm GROUND 0.8mm 1.6mm 19.4mm Empty Area 6x6 mm 50Ω ΩΩ ΩFeed line 1.66mm GROUND 0.8mm 1.6mm 19.4mm Empty Area 6x6 mm 50Ω ΩΩ ΩFeed line 1.66mm GROUND E Approval sheet Page 5 of 9 ASC_RFANT3216120A5T_V05 Apr. 2010 RADIATION PATTERN Radiation Pattern and Gain were dependent on measurement board design. The specification of RFANT3216120A5T antenna was measured based on the PCB size and installation position as shown in the below figure Test Board Vertical Horizontal Y - Z Plane Average Gain= 0.891 dBi Peak Gain = 2.12dBi Average Gain = 0.64 dBi Peak Gain= -6.07dBi Average Gain=-11.62dBi X - Z Plane Average Gain= -1.846 dBi Peak Gain= -7.78 dBi Average Gain= -11.97dBi Peak Gain= 0.96 dBi Average Gain= -2.29 dBi X - Y Plane Average Gain= -2.556 dBi Peak Gain= -9.41 dBi Average Gain= -15.54dBi Peak Gain= 1.40 dBi Average Gain= -2.78 dBi GROUND X Y Z GROUND X Y Z X Y Z Approval sheet Page 6 of 9 ASC_RFANT3216120A5T_V05 Apr. 2010 RELIABILITY TEST Test item Test condition / Test method Specification Solderability JIS C 0050-4.6 JESD22-B102D *Solder bath temperature：235 ± 5°C *Immersion time：2 ± 0.5 sec *Solder：Sn3Ag0.5Cu for lead-free At least 95% of a surface of each terminal electrode must be covered by fresh solder. Leaching (Resistance to dissolution of metallization) IEC 60068-2-58 *Solder bath temperature：260 ± 5°C *Leaching immersion time：30 ± 0.5 sec *Solder : SN63A Loss of metallization on the edges of each electrode shall not exceed 25%. Resistance to soldering heat JIS C 0050-5.4 *Preheating temperature：120~150°C, 1 minute. *Solder temperature：270±5°C *Immersion time：10±1 sec *Solder：Sn3Ag0.5Cu for lead-free Measurement to be made after keeping at room temperature for 24±2 hrs No mechanical damage. Samples shall satisfy electrical specification after test. Loss of metallization on the edges of each electrode shall not exceed 25%. Drop Test JIS C 0044 *Height：75 cm *Test Surface：Rigid surface of concrete or steel. *Times：6 surfaces for each units；2 times for each side. No mechanical damage. Samples shall satisfy electrical specification after test. Adhesive Strength of Termination JIS C 0051- 7.4.3 *Pressurizing force： 5N(≦0603)；10N(>0603) *Test time：10±1 sec No remarkable damage or removal of the termination. Bending test JIS C 0051- 7.4.1 The middle part of substrate shall be pressurized by means of the pressurizing rod at a rate of about 1 mm/s per second until the deflection becomes 1mm/s and then pressure shall be maintained for 5±1 sec. Measurement to be made after keeping at room temperature for 24±2 hours No mechanical damage. Samples shall satisfy electrical specification after test. Approval sheet Page 7 of 9 ASC_RFANT3216120A5T_V05 Apr. 2010 Temperature cycle JIS C 0025 1. 30±3 minutes at -40°C±3°C, 2. 10~15 minutes at room temperature, 3. 30±3 minutes at +85°C±3°C, 4. 10~15 minutes at room temperature, Total 100 continuous cycles Measurement to be made after keeping at room temperature for 24±2 hrs No mechanical damage. Samples shall satisfy electrical specification after test. Vibration JIS C 0040 *Frequency：10Hz~55Hz~10Hz(1min) *Total amplitude：1.5mm *Test times：6hrs.(Two hrs each in three mutually perpendicular directions) No mechanical damage. Samples shall satisfy electrical specification after test. High temperature JIS C 0021 *Temperature：85°C±2°C *Test duration：1000+24/-0 hours Measurement to be made after keeping at room temperature for 24±2 hrs No mechanical damage. Samples shall satisfy electrical specification after test. Humidity (steady conditions) JIS C 0022 *Humidity：90% to 95% R.H. *Temperature：40±2°C *Time：1000+24/-0 hrs. Measurement to be made after keeping at room temperature for 24±2 hrs ※ 500hrs measuring the first data then 1000hrs data No mechanical damage. Samples shall satisfy electrical specification after test. Low temperature JIS C 0020 *Temperature：-40°C±2°C *Test duration：1000+24/-0 hours Measurement to be made after keeping at room temperature for 24±2 hrs No mechanical damage. Samples shall satisfy electrical specification after test. Approval sheet Page 8 of 9 ASC_RFANT3216120A5T_V05 Apr. 2010 SOLDER…

Text truncated - open the document above for the full version.

Page 1 of 35 FCC ID: 2BV7L-FINDSUP Report No.: LCSC05186046EA Guangzhou LCS Compliance Testing Laboratory Ltd. Add: No.44-1, Qianfeng North Road, Shiqi, Panyu District, Guangzhou, Guangdong, China Tel: +(86) 020-39166689 | E-mail: [email protected] | Web: www.lcs-cert.com Appendix A RF Test Data for BT LE (Conducted Measurement) Product Name: Magnetic Wallet Test Model: Find SUP Environmental Conditions Temperature: 24.1C Relative Humidity: 52.2% ATM Pressure: 100.0 kPa Test Engineer: Zhang hai Supervised by: Fengliu Tang Page 2 of 35 FCC ID: 2BV7L-FINDSUP Report No.: LCSC05186046EA Guangzhou LCS Compliance Testing Laboratory Ltd. Add: No.44-1, Qianfeng North Road, Shiqi, Panyu District, Guangzhou, Guangdong, China Tel: +(86) 020-39166689 | E-mail: [email protected] | Web: www.lcs-cert.com A.1 DTS Bandwidth Test Result TestMode Antenna Freq (MHz) DTS BW [MHz] FL[MHz] FH[MHz] Limit[MHz] Verdict BLE_1M Ant1 2402 0.660 2401.660 2402.320 0.5 PASS 2440 0.660 2439.660 2440.320 0.5 PASS 2480 0.660 2479.660 2480.320 0.5 PASS BLE_2M Ant1 2402 1.160 2401.400 2402.560 0.5 PASS 2440 1.152 2439.400 2440.552 0.5 PASS 2480 1.156 2479.400 2480.556 0.5 PASS Page 3 of 35 FCC ID: 2BV7L-FINDSUP Report No.: LCSC05186046EA Guangzhou LCS Compliance Testing Laboratory Ltd. Add: No.44-1, Qianfeng North Road, Shiqi, Panyu District, Guangzhou, Guangdong, China Tel: +(86) 020-39166689 | E-mail: [email protected] | Web: www.lcs-cert.com Test Graphs BLE_1M_Ant1_2402 BLE_1M_Ant1_2440 BLE_1M_Ant1_2480 Page 4 of 35 FCC ID: 2BV7L-FINDSUP Report No.: LCSC05186046EA Guangzhou LCS Compliance Testing Laboratory Ltd. Add: No.44-1, Qianfeng North Road, Shiqi, Panyu District, Guangzhou, Guangdong, China Tel: +(86) 020-39166689 | E-mail: [email protected] | Web: www.lcs-cert.com BLE_2M_Ant1_2402 BLE_2M_Ant1_2440 Page 5 of 35 FCC ID: 2BV7L-FINDSUP Report No.: LCSC05186046EA Guangzhou LCS Compliance Testing Laboratory Ltd. Add: No.44-1, Qianfeng North Road, Shiqi, Panyu District, Guangzhou, Guangdong, China Tel: +(86) 020-39166689 | E-mail: [email protected] | Web: www.lcs-cert.com BLE_2M_Ant1_2480 Page 6 of 35 FCC ID: 2BV7L-FINDSUP Report No.: LCSC05186046EA Guangzhou LCS Compliance Testing Laboratory Ltd. Add: No.44-1, Qianfeng North Road, Shiqi, Panyu District, Guangzhou, Guangdong, China Tel: +(86) 020-39166689 | E-mail: [email protected] | Web: www.lcs-cert.com A.2 Maximum Peak conducted output power Test Result Peak TestMode Antenna Freq (MHz) Conducted Peak Powert[dBm] Conducted Limit[dBm] Verdict BLE_1M Ant1 2402 -0.73 ≤30 PASS 2440 2.04 ≤30 PASS 2480 0.59 ≤30 PASS BLE_2M Ant1 2402 -0.90 ≤30 PASS 2440 1.73 ≤30 PASS 2480 0.32 ≤30 PASS Page 7 of 35 FCC ID: 2BV7L-FINDSUP Report No.: LCSC05186046EA Guangzhou LCS Compliance Testing Laboratory Ltd. Add: No.44-1, Qianfeng North Road, Shiqi, Panyu District, Guangzhou, Guangdong, China Tel: +(86) 020-39166689 | E-mail: [email protected] | Web: www.lcs-cert.com Test Graphs Peak BLE_1M_Ant1_2402 BLE_1M_Ant1_2440 BLE_1M_Ant1_2480 Page 8 of 35 FCC ID: 2BV7L-FINDSUP Report No.: LCSC05186046EA Guangzhou LCS Compliance Testing Laboratory Ltd. Add: No.44-1, Qianfeng North Road, Shiqi, Panyu District, Guangzhou, Guangdong, China Tel: +(86) 020-39166689 | E-mail: [email protected] | Web: www.lcs-cert.com BLE_2M_Ant1_2402 BLE_2M_Ant1_2440 Page 9 of 35 FCC ID: 2BV7L-FINDSUP Report No.: LCSC05186046EA Guangzhou LCS Compliance Testing Laboratory Ltd. Add: No.44-1, Qianfeng North Road, Shiqi, Panyu District, Guangzhou, Guangdong, China Tel: +(86) 020-39166689 | E-mail: [email protected] | Web: www.lcs-cert.com BLE_2M_Ant1_2480 Page 10 of 35 FCC ID: 2BV7L-FINDSUP Report No.: LCSC05186046EA Guangzhou LCS Compliance Testing Laboratory Ltd. Add: No.44-1, Qianfeng North Road, Shiqi, Panyu District, Guangzhou, Guangdong, China Tel: +(86) 020-39166689 | E-mail: [email protected] | Web: www.lcs-cert.com A.3 Maximum power spectral density Test Result TestMode Antenna Freq (MHz) Result[dBm/3kHz] Limit[dBm/3kHz] Verdict BLE_1M Ant1 2402 -17.59 ≤8.00 PASS 2440 -14.83 ≤8.00 PASS 2480 -16.32 ≤8.00 PASS BLE_2M Ant1 2402 -20.93 ≤8.00 PASS 2440 -18.14 ≤8.00 PASS 2480 -19.65 ≤8.00 PASS Page 11 of 35 FCC ID: 2BV7L-FINDSUP Report No.: LCSC05186046EA Guangzhou LCS Compliance Testing Laboratory Ltd. Add: No.44-1, Qianfeng North Road, Shiqi, Panyu District, Guangzhou, Guangdong, China Tel: +(86) 020-39166689 | E-mail: [email protected] | Web: www.lcs-cert.com Test Graphs BLE_1M_Ant1_2402 BLE_1M_Ant1_2440 BLE_1M_Ant1_2480 Page 12 of 35 FCC ID: 2BV7L-FINDSUP Report No.: LCSC05186046EA Guangzhou LCS Compliance Testing Laboratory Ltd. Add: No.44-1, Qianfeng North Road, Shiqi, Panyu District, Guangzhou, Guangdong, China Tel: +(86) 020-39166689 | E-mail: [email protected] | Web: www.lcs-cert.com BLE_2M_Ant1_2402 BLE_2M_Ant1_2440 Page 13 of 35 FCC ID: 2BV7L-FINDSUP Report No.: LCSC05186046EA Guangzhou LCS Compliance Testing Laboratory Ltd. Add: No.44-1, Qianfeng North Road, Shiqi, Panyu District, Guangzhou, Guangdong, China Tel: +(86) 020-39166689 | E-mail: [email protected] | Web: www.lcs-cert.com BLE_2M_Ant1_2480 Page 14 of 35 FCC ID: 2BV7L-FINDSUP Report No.: LCSC05186046EA Guangzhou LCS Compliance Testing Laboratory Ltd. Add: No.44-1, Qianfeng North Road, Shiqi, Panyu District, Guangzhou, Guangdong, China Tel: +(86) 020-39166689 | E-mail: [email protected] | Web: www.lcs-cert.com A.4Band edge measurements Test Result TestMode Antenna ChName Freq (MHz) RefLevel[dBm] Result[dBm] Limit[dBm] Verdict BLE_1M Ant1 Low 2402 -1.53 -45.26 ≤-21.53 PASS High 2480 -0.25 -44.23 ≤-20.25 PASS BLE_2M Ant1 Low 2402 -1.82 -44.37 ≤-21.82 PASS High 2480 -0.50 -44.57 ≤-20.5 PASS Page 15 of 35 FCC ID: 2BV7L-FINDSUP Report No.: LCSC05186046EA Guangzhou LCS Compliance Testing Laboratory Ltd. Add: No.44-1, Qianfeng North Road, Shiqi, Panyu District, Guangzhou, Guangdong, China Tel…

Text truncated - open the document above for the full version.