2BV7W-SHW-13BTE hearing aids

Author Checked by Approved by Signature: Date: Signature: Date: Signature: Date: HA BU Business Unit Project Name Product Name FCC ID SogneBTE BTEhearing aids BVW-SHW-13 9010100314-EUD-BTE-01 Instructions for Use BTE hearing aids Valid from: December 20, 2025 © Shanghai United Imaging Microelectronics Technology Co., Ltd. Reserved 2 History Version 01 Author biman.xu CR No. NA Change Contents NA 3 Preface Thank you for choosing United Imaging. We are dedicated to enhancing your listening experience. The entire United Imaging series features groundbreaking algorithmic innovations, revolutionizing listening clarity, speech intelligibility, and wearing comfort to provide users with a completely new hearing experience. It incorporates a newly upgraded noise reduction algorithm that effectively distinguishes between essential and non-essential speech sounds, helping you to identify and focus on desired sounds in complex environments. The hearing aid is also equipped with multiple listening programs that respond rapidly to changes in your daily acoustic environment, ensuring consistent clarity. United Imaging also mitigates common device-related interference, such as feedback (whistling) and background noise, evolving the listening performance to be clearer, more understandable, and more comfortable, so you can enjoy listening with confidence. Please do not hesitate to contact your hearing aid professional. He or she will perform a personalized fitting based on your individual hearing needs and listening preferences to ensure the best possible experience. We also encourage you to read the instructions for use carefully to learn about operating instructions and maintenance, which will help you adapt more quickly to your new hearing aid. If you have any questions not answered in the instructions for use, please feel free to contact us at any time. 4 Table of Contents I. Basic Information of Product ................................................................ 5 II. Features and Identification .................................................................... 6 III. Operating Instructions ........................................................................... 7 1. On/Off ......................................................................................................... 7 2. Replacing a Battery ..................................................................................... 8 3. Left and Right Ear Markings .................................................................... 10 4. Attaching the dome or earmould to the hearing aid ................................. 10 5. Putting on a Hearing Aid .......................................................................... 10 6. Removing a Hearing Aid .......................................................................... 11 7. Wireless Function ..................................................................................... 12 8. Multi-Function Button .............................................................................. 12 IV. Maintenance and Service ..................................................................... 12 V. Troubleshooting .................................................................................... 14 VI. Precautions ............................................................................................ 15 VII. Technical Specifications ....................................................................... 18 1. Basic Safety Characteristics ...................................................................... 18 2. Electroacoustic Performance Parameters ................................................. 19 3. Description on Wireless Network Security .............................................. 19 4. User Access Control Mechanism .............................................................. 20 5. Environmental Conditions ........................................................................ 20 6. Disposal ..................................................................................................... 20 VIII. Electromagnetic Compatibility (EMC) .............................................. 20 IX. Symbol and Mark Legend .................................................................... 25 X. Maintenance Policy ............................................................................... 25 XI. Electromagnetic Compatibility (EMC) ................ 错误!未定义书签。 5 I. Basic Information of Product Product Name BTE hearing aids Model name Specification BTE SHW-13 n32/n33/n53/n55/n56/n73/n75/n76/n93/n94/n95/n96 BTE SCW-13 n32/n33/n34/n36/n53/n54/n75/n95/n96 Intended Use The hearing aid is intended to amplify and transmit sound to the ear and thereby compensate for impaired hearing. Intended Users Person with hearing loss using a hearing aid and their caregivers. Hearing care professional responsible for adjusting the hearing aid. Intended Patient The target population is primarily the adult population over 18 years of age. This product may also be used with children 36 months of age or older. Individuals with cognitive impairment will require constant supervision by a caregiver. User Environment The hearing aid is suitable for the home healthcare environment and due to their portability it may happen that it is used in professional healthcare facility environment like physician oces, dental oces etc. Indication Patients diagnosed with mild to profound air-conduction hearing loss requiring amplification. Contraindications This product is not suitable for individuals with acute otitis externa, myringitis, chronic suppurative otitis media (during the active discharge phase), acute suppurative otitis media, or a known allergy to any of product materials. Notes for Hearing Aid Professionals The professional fitting of hearing aids must be performed by hearing aid professionals with appropriate national qualifications. During the fitting process, special attention must be given to users p…

Text truncated - open the document above for the full version.

(ShanghaiUnitedImagingMicroelectronicsTechnologyCo.,Ltd.) (6/9/26) EurofinsElectricalandElectronicTestingNA,Inc. 914WestPatapscoAvenue Baltimore,MD21230 RE:AttestationStatementsPart2.911(d)(5)(i)requestfor( 2BV7W-SHW-13 ) [SHENZHENEASYLINKINTECHNOLOGYCO.,LTD](“theapplicant”)certifiesthatthe equipmentforwhichauthorizationissoughtisnot“covered”equipmentprohibited fromreceivinganequipmentauthorizationpursuanttosection2.903oftheFCCrules. Wealsocertifythat,asofthedateofthefilingoftheapplication,theequipmentdoes notutilizecyber-securityoranti-virussoftwarefromKasperskyLab,Inc,oranyofits successorsandassignees,whichisalsoonthe“coveredlist”. Sincerely, (Applicantsignature) (Applicantprintedname)YantingLiu (ShanghaiUnitedImagingMicroelectronicsTechnologyCo.,Ltd.) (6/9/26) EurofinsElectricalandElectronicTestingNA,Inc. 914WestPatapscoAvenue Baltimore,MD21230 RE:AttestationStatementsPart2.911(d)(5)(ii)requestfor(2BV7W-SHW-13) [SHENZHENEASYLINKINTECHNOLOGYCO.,LTD ](“theapplicant”)certifies that,asofthedateofthefilingoftheapplication,theapplicantisnotidentifiedonthe CoveredListasanentityproducing“covered”equipment. Sincerely, (Applicantsignature) (Applicantprintedname)YantingLiu

APPLICANTCOMPANYLETTERHEAD We（ShanghaiUnitedImagingMicroelectronicsTechnologyCo.,Ltd.） ProducemodelBTESHW-13,andseriesmodels:BTESCW-13,theyare sameinsafetykeyparts,circuitdiagramprinciple,structure,voltage, current,etc.,thedifferenceisonlythemodelnameisdifferent. Company：ShanghaiUnitedImagingMicroelectronicsTechnologyCo., Ltd. Date：2026-6-15 Signature:

ShanghaiUnitedImagingMicroelectronicsTechnologyCo.,Ltd. (6/9/26) EurofinsElectricalandElectronicTestingNA,Inc. 914WestPatapscoAvenue Baltimore,MD21230 RE:CONFIDENTIALITYREQUESTFOR(BTEhearingaids/2BV7W-SHW-13) ToWhomItMayConcern: Thisletterservesasanofficialrequestforconfidentialityundersections0.457and0.459 ofCFR47.Wehaverequestedthatthe(Blockdiagram,circuitdiagram,operational description,PCBLayout)requiredtobesubmittedwiththisapplication bepermanentlywithheldfrompublicreview. SPECIFYREASONFORREQUEST(i.e.theabovedocumentsarecompany proprietaryinformationthatcouldnevergetintothepossessionofyour competition). Pleasecontactmeifthereisanyinformationyoumayneed. Sincerely,

ShanghaiUnitedImagingMicroelectronicsTechnologyCo.,Ltd. (6/9/26) EurofinsElectricalandElectronicTestingNA,Inc. 914WestPatapscoAvenue Baltimore,MD21230 RE:LETTEROFAGENTAUTHORIZATION ToWhomItMayConcern: We,theundersigned,herebyauthorize( ShenzhenHaiyunStandardTechnicalCO.,Ltd.)toacton ourbehalfinallmattersrelatingtoapplicationforequipmentauthorization, includingthesigningofalldocumentsrelatingtothesematters. Wealsoherebycertifythatnopartytotheapplicationauthorizedhereunderissubjecttothe denialofbenefits,includingFCCbenefits,pursuanttoSection5301oftheAnti-DrugAbuseAct of1988,21U.S.C.853(a). Thisagreementexpiresoneyearfromthecurrentdate. Sincerely,

FCC ID: 2BV7W-SHW-13 Page 1 / 4 EUT EXTERNAL PHOTO EUT Photo EUT Photo FCC ID: 2BV7W-SHW-13 Page 2 / 4 EUT Photo EUT Photo FCC ID: 2BV7W-SHW-13 Page 3 / 4 EUT Photo EUT Photo FCC ID: 2BV7W-SHW-13 Page 4 / 4 EUT Photo

Lableand location

Lableand location user manualFCC IDlocation

FCC ID: 2BV7W-SHW-13 Page 1 / 5 EUT INTERNAL PHOTOS EUT Photo EUT Photo FCC ID: 2BV7W-SHW-13 Page 2 / 5 EUT Photo EUT Photo BT Antenna FCC ID: 2BV7W-SHW-13 Page 3 / 5 EUT Photo EUT Photo FCC ID: 2BV7W-SHW-13 Page 4 / 5 EUT Photo EUT Photo FCC ID: 2BV7W-SHW-13 Page 5 / 5 EUT Photo

HY-FCC 2.1093 Ver.1.1 Page 1 of 5 Report No.: RF260518005-01-002 FCC RF EXPOSURE REPORT FCC ID: 2BV7W-SHW-13 Tes t Report No...........: RF260518005-01-002 Product(s) Name.........: BTE hearing aids Model(s)....................: BTE SHW-13, BTE SCW-13 Trade Mark................: N/A Applicant...................: Shanghai United Imaging Microelectronics Technology Co., Ltd. Address.....................: Floor 1, Floor 4, Floor 5, Building 4, Lane 150, Taiye Street, Jiading District, 201899 Shanghai, P.R.China. Receipt Date..............: 2026.05.20 Test Date...................: 2026.05.22 ~ 2026..05.29 Issued Date................: 2026.06.01 Standards..................: CFR47 FCC Part 1: Section 1.1310; CFR47 FCC Part 2: Section 2.1093; FCC KDB Publication 447498 D04; FCC KDB Publication 865664 D02 v01r02 Testing Laboratory......: Shenzhen Haiyun Standard Technical Co., Ltd. Prepared By: Checked By: Approved By: Jason Huang Black Ding Tim Zhang HY-FCC 2.1093 Ver.1.1 Page 2 of 5 Report No.: RF260518005-01-002 History of this test report Original Report Issue Date: 2026.06.01 ● No additional attachment ○ Additional attachments were issued following record Attachment No. Issue Date Description HY-FCC 2.1093 Ver.1.1 Page 3 of 5 Report No.: RF260518005-01-002 1. MPE CALCULATION METHOD Limit Calculation Method ERP/EIRP = P T +G T −L C ERP/EIRP is the equivalent (or effective) radiated power [in same units as P T , typically dBW, dBm, or power spectral density (psd)], relative to either a dipole antenna (ERP) or an isotropic antenna (EIRP). P T is the transmitter output power, in dBW, dBm, or psd (power over a specified reference bandwidth). G T is the gain of the transmitting antenna, in dBd (ERP) or dBi (EIRP). L C is the signal attenuation in the connecting cable between the transmitter and the antenna, in dB. Table for Filed Antenna For BLE Antenna gain Antenna Type 0.04dBi FPC antenna HY-FCC 2.1093 Ver.1.1 Page 4 of 5 Report No.: RF260518005-01-002 2. TEST RESULTS Worst case as below Mode Output power to antenna (dBm) Ant gain (dBi) EIRP (dBm) ERP (dBm) ERP(mw) Distance (cm) Pth (mW) BLE 1.52 0.04 1.56 -0.59 0.87 0.5 2.79 Note: 1. ERP = EIRP −2.15 dB 2. 0.87mW<2.79mw  Conclusion The SAR evaluation is not required HY-FCC 2.1093 Ver.1.1 Page 5 of 5 Report No.: RF260518005-01-002 Statement 1. The report is invalid without the official seal or special seal of Shenzhen Haiyun Standard Technical Co., Ltd. (hereinafter referred to as the unit). 2. The report is invalid without the signature of the approver. 3. The report is invalid if altered arbitrarily. 4. The report shall not be partially copied without the written approval of the unit. 5. The reported test results are only valid for the tested samples. 6. If there is any objection to the test report, it shall be submitted to the test unit within 15 days from the date of receiving the report, and the overdue shall not be accepted. Shenzhen Haiyun Standard Technical Co., Ltd. Address: Room 110, 111, 112, 113, 115, 116, Block B, Jinyuan Business Building, No. 302, Xixiang Avenue, Labor Community, Xixiang Street, Baoan District, Shenzhen, China （END OF REPORT）

Tel:021-54266190Fax:021-54266191Web:www.zxsignalplus.com ANTENNAPERFORMANCE TESTREPORT Tel:021-54266190Fax:021-54266191Web:www.zxsignalplus.com AntennaunderTest（AUT）Description BrandName：BTEhearingaids. TypeName：BTESCW-13 MarkingName：2.4GHzFPCANTENNA AntennaType:FlexiblePrintedCircuitAntenna(FPCAntenna)。 DataPreview Free Freq（MHz）Gain（dBi）Effi（dB） 2400-6.18-6.23 2410-5.16-5.92 2420-3.74-5.53 2430-4.58-5.49 2440-3.11-5.08 2450-1.56-4.66 2460-2.05-4.49 2470-0.66-4.1 24800.04-4.01 2490-1.06-4.09 25001.12-3.92 Tel:021-54266190Fax:021-54266191Web:www.zxsignalplus.com 1.RFFixtureExperiment 1.1TestSetup 1.1.1VNATestSetup VSWRandReturnLossmeasurements(S11)wereperformed usinganKeySightE5071CNetworkAnalyzer.Theisolation betweenantennasisalsotested.Thetestingwasperformedwith apparatusinfreespace. 1.1.2AnechoicChamberTestSetup Thegainoftheantennawasmeasuredintheanechoicchamber. Thechamberprovideslessthan–30dBreflectivityfrom400MHz through6GHz.Thechambersizeis:7m*4m*3m.The measurementresultsarecalibratedusingaleakywavehorn Tel:021-54266190Fax:021-54266191Web:www.zxsignalplus.com standard.Wecanmeasuretheantennagainandefficiency accurately. +X +Z +Y +X +Y Tel:021-54266190Fax:021-54266191Web:www.zxsignalplus.com 2.AntennaSolutio ANT-free-S11 Tel:021-54266190Fax:021-54266191Web:www.zxsignalplus.com ANT1-Radiationpatterns:2D(2450MHz) Free： Tel:021-54266190Fax:021-54266191Web:www.zxsignalplus.com AntennaSpecification:

HY-FCC part 15C-BLE Ver.1.1Page 1 of 57Report No.: RF260518005-01-001 RF TEST REPORT FCC ID: 2BV7W-SHW-13 Test Report No...........: RF260518005-01-001 Product(s) Name.........: BTE hearing aids Model(s)....................: BTE SHW-13, BTE SCW-13 Trade Mark................: N/A Applicant...................: Shanghai United Imaging Microelectronics Technology Co., Ltd. Address.....................: Floor 1, Floor 4, Floor 5, Building 4, Lane 150, Taiye Street, Jiading District, 201899 Shanghai, P.R.China. Receipt Date..............: 2026.05.20 Test Date...................: 2026.05.22 ~ 2026..05.29 Issued Date................: 2026.06.01 Standards..................: 47 CFR FCC Part 15, Subpart C(Section 15.247) ANSI C63.10:2020+Cor. 1-2023+C63.10a-2024+Errata to C63.10a-2024 Testing Laboratory......: Shenzhen Haiyun Standard Technical Co., Ltd. Prepared By: Checked By: Approved By: Jason Huang Black Ding Tim Zhang HY-FCC part 15C-BLE Ver.1.1 Page 2 of 57 Report No.: RF260518005-01-001 Table of Contents REPORT ISSUED HISTORY 4 1 . SUMMARY OF TEST RESULTS 5 1.1 TEST FACILITY 6 1.2 MEASUREMENT UNCERTAINTY 6 1.3 TEST ENVIRONMENT CONDITIONS 6 2 . GENERAL INFORMATION 7 2.1 GENERAL DESCRIPTION OF EUT 7 2.2 DESCRIPTION OF TEST MODES 8 2.3 PARAMETERS OF TEST SOFTWARE 8 2.4 SUPPORT UNITS 8 3 . AC POWER LINE CONDUCTED EMISSIONS 9 3.1 LIMIT 9 3.2 TEST PROCEDURE 9 3.3 DEVIATION FROM TEST STANDARD 9 3.4 TEST SETUP 10 3.5 EUT OPERATING CONDITIONS 10 3.6 TEST RESULTS 10 4 . RADIATED EMISSIONS 11 4.1 LIMIT 11 4.2 TEST PROCEDURE 12 4.3 DEVIATION FROM TEST STANDARD 13 4.4 TEST SETUP 13 4.5 EUT OPERATING CONDITIONS 14 4.6 TEST RESULT - 9 KHZ TO 30 MHZ 14 4.7 TEST RESULT - 30 MHZ TO 1000 MHZ 14 4.8 TEST RESULT - ABOVE 1000 MHZ 14 5 . BANDWIDTH 15 5.1 LIMIT 15 5.2 TEST PROCEDURE 15 5.3 DEVIATION FROM STANDARD 15 5.4 TEST SETUP 15 5.5 EUT OPERATION CONDITIONS 15 5.6 TEST RESULTS 15 6 . MAXIMUM OUTPUT POWER 16 6.1 LIMIT 16 6.2 TEST PROCEDURE 16 HY-FCC part 15C-BLE Ver.1.1 Page 3 of 57 Report No.: RF260518005-01-001 6.3 DEVIATION FROM STANDARD 16 6.4 TEST SETUP 16 6.5 EUT OPERATION CONDITIONS 16 6.6 TEST RESULTS 16 7 . CONDUCTED SPURIOUS EMISSION 17 7.1 LIMIT 17 7.2 TEST PROCEDURE 17 7.3 DEVIATION FROM STANDARD 17 7.4 TEST SETUP 17 7.5 EUT OPERATION CONDITIONS 17 7.6 TEST RESULTS 17 8 . POWER SPECTRAL DENSITY 18 8.1 LIMIT 18 8.2 TEST PROCEDURE 18 8.3 DEVIATION FROM STANDARD 18 8.4 TEST SETUP 18 8.5 EUT OPERATION CONDITIONS 18 8.6 TEST RESULTS 18 9 . MEASUREMENT INSTRUMENTS LIST 19 10 . ANTENNA REQUIREMENT 20 APPENDIX B - RADIATED EMISSION - 9 KHZ TO 30 MHZ 21 APPENDIX C - RADIATED EMISSION - 30 MHZ TO 1000 MHZ 22 APPENDIX D - RADIATED EMISSION - ABOVE 1000 MHZ 25 APPENDIX E - BANDWIDTH 26 APPENDIX F - MAXIMUM OUTPUT POWER 35 APPENDIX G - CONDUCTED SPURIOUS EMISSION 40 APPENDIX H - POWER SPECTRAL DENSITY 52 HY-FCC part 15C-BLE Ver.1.1 Page 4 of 57 Report No.: RF260518005-01-001 REPORT ISSUED HISTORY Original Report Issue Date: 2026.06.01 ● No additional attachment ○ Additional attachments were issued following record Attachment No. Issue Date Description HY-FCC part 15C-BLE Ver.1.1 Page 5 of 57 Report No.: RF260518005-01-001 1. SUMMARY OF TEST RESULTS Test procedures according to the technical standard(s): FCC CFR Title 47, Part 15, Subpart C Standard(s) Section Test Item Test Result Judgment Remark 15.207 AC Power Line Conducted Emissions ------ N/A ------ 15.247(d) 15.205(a) 15.209(a) Radiated Emissions APPENDIX B APPENDIX C APPENDIX D PASS ------ 15.247(a)(2) Bandwidth APPENDIX E PASS ------ 15.247(b)(3) Maximum Output Power APPENDIX F PASS ------ 15.247(d) Conducted Spurious Emission APPENDIX G PASS ------ 15.247(e) Power Spectral Density APPENDIX H PASS ------ 15.203 Antenna Requirement ------ PASS Note(2) Note: (1) “N/A” denotes test is not applicable to this device; The EUT is powered by battery, so it is not applicable to this test item. (2) The device what use a permanently attached antenna were considered sufficient to comply with the provisions of 15.203. HY-FCC part 15C-BLE Ver.1.1 Page 6 of 57 Report No.: RF260518005-01-001 1.1 TEST FACILITY Company: Shenzhen Haiyun Standard Technical Co., Ltd. Address: No. 110-113, 115, 116, Block B, Jinyuan Business Building, Bao'an District, Shenzhen, China CNAS Registration Number: CNAS L18252 FCC Designation Number CN1340 CAB identifier CN0145 A2LA Certificate Number 6823.01 1.2 MEASUREMENT UNCERTAINTY ISO/IEC 17025 requires that an estimate of the measurement uncertainties associated with the emissions test results be included in the report. The measurement uncertainties given below are based on a 95% confidence level (based on a coverage factor (k=2)) Uncertainty Parameter Uncertainty Occupied Channel Bandwidth ±102kHz RF power conducted ±0.243dB Power Spectral Density ±0.743dB Conducted Spurious Emission ±1.328dB Conducted emission(9kHz~30MHz) AC main ±2.68dB Radiated emission(9kHz~30MHz) ±3.50dB Radiated emission (30MHz~1GHz) ±4.20dB Radiated emission (1GHz~18GHz) ±5.10dB Radiated emission (18GHz~40GHz) ±5.26dB Note: Unless specifically mentioned, the uncertainty of measurement has not been taken into account to declare the compliance or non-compliance to the specification. 1.3 TEST ENVIRONMENT CONDITIONS Test Item Temperature Humidity Test Voltage Tested By Radiated Emissions-9 kHz to 30 MHz 23.1°C 52% DC 1.45V Lemon He Radiated Emissions-30 MHz to 1000 MHz 23.1°C 52% DC 1.45V Lemon He Radiated Emissions-Above 1000 MHz 23.1°C 52% DC 1.45V Lemon He Bandwidth 23.5°C 49% DC 1.45V Elio Lin Maximum Output Power 23.5°C 49% DC 1.45V Elio Lin Conducted Spurious Emission 23.5°C 49% DC 1.45V Elio Lin Power Spectral Density 23.5°C 49% DC 1.45V Elio Lin HY-FCC part 15C-BLE Ver.1.1 Page 7 of 57 Report No.: RF260518005-01-001 2. GENERAL INFORMATION 2.1 GENERAL DESCRIPTION OF EUT Sample No. POC260518005-S001 Product name BTE hearing aids Model name BTE SHW-13, BTE SCW-13 Test model BTE SHW-13 Model differencce Only the model name is different Trade Mark N/A Power supply DC…

Text truncated - open the document above for the full version.

FCC ID: 2BV7W-SHW-13 Page 1 / 2 APPENDIX PHOTOS OF TEST SETUP Radiated Spurious Emission, Below 1GHz Radiated Spurious Emission, Above 1GHz FCC ID: 2BV7W-SHW-13 Page 2 / 2 RF Conducted Emission