2BV8O-CABRW1CWGPhone & Watch Cable

Smart Watch Wireless Charger User Manual Applicable Model: Blind Plug Central Control, Compatible with Apple & Samsung Watch Wireless Charging Safety Warnings 1. Operating Environment • Do not charge in environments with temperature above 30°C or below 0°C, to avoid battery damage or reduced charging efficiency. • Keep away from water sources, flammable materials and strong magnetic field environments. 2. Adapter Compatibility Charging tests for different watches and mobile phones with various adapters have been completed. Repeated placement and removal of watches, plugging/unplugging of adapters, and forward/reverse insertion of Type-C ports were verified to confirm power-on stability at different positions. Plug-in charging test: Multiple watches and mobile phones are compatible with 23 types of Type-C port adapters. Product Overview Core Features • Dual-coil design: Supports mobile phone wireless charging. • Magnetic Alignment: Automatic adsorption and positioning to avoid alignment deviation. Input Parameter 20V/3A (Must be used with a standard power adapter) Operation Instructions 1. Preparations • Connect the charging base to the original USB-C data cable and power adapter, then switch on the power. • Clean the charging area on the back of the watch and the surface of the base to ensure no dust or foreign metal objects. 2. Charging Operation Align the center of the watch back with the charging base; the magnetic interface will automatically attach and start charging. Note: The button side of the watch shall be aligned with the interface direction of the base. 3. Status Confirmation A lightning icon and charging percentage displayed on the watch screen indicate normal charging. Precautions 1. Charging Efficiency Optimization • Non-original bases may cause abnormal charging; Qi protocol compliant third-party charging devices can be used in emergency scenarios. 2. Daily Maintenance • Wipe the charging contact surface regularly with a dry cloth to prevent corrosion by sweat. • Store in a dry environment when idle; avoid squeezing or bending the cable. Troubleshooting Fault Phenomenon Solutions No charging response 1. Check if the power connection is normal; 2. Adjust the watch placement slightly until the charging icon appears Slow charging speed Clean foreign matter and impurities between the watch and the base Cannot power on after shutdown due to low battery Charge with this base for more than 10 minutes to power on the device Technical Specifications Item Specification Input 5V, Current ≤ 80mA Output Power Max 2.5W for IW & SW; C-To-C supports 20V/3A/60W (MAX); C-To Apple Watch supports 5V/0.5A/2.5W (MAX); C-To Samsung Watch supports 5V/0.5A/2.5W (MAX); C-To C + Apple Watch supports 20V/3A/60W + 2.5W; C-To C + Samsung Watch (SW) supports 20V/3A/60W + 2.5W Compatible Protocol Qi Wireless Standard Operating Temperature 0°C~35°C FCC Compliance Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device shall not cause harmful radio interference; (2) This device must accept any interference received, including interference that may cause undesired operation. Note 1: This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy. If not installed and used in accordance with the instructions, it may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna; •Increase the separation between the equipment and receiver; •Connect the equipment into an outlet on a circuit different from that to which the receiver is connected; •Consult the dealer or an experienced radio/TV technician for help. Note 2: Any changes or modifications to this device not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. RF Radiation Exposure Statement To comply with FCC RF radiation exposure limits, a minimum separation distance of 20 cm shall be maintained between the radiator and all persons during installation and operation. This device and its antenna must not be co-located or operated in conjunction with any other antenna or transmitter. “This device complies with Industry Canada’s license-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesired operation of the device.” « Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioelectrique subi, meme sile brouillage est susceptible d'en compromettre le fonctionnement. » The product should be kept at least 20CM away when used. Le produit doit être conservé au moins 20CM une fois utilisé.

Dongguan Jadus Electronics Co., Ltd. Covered Equipment Certification Attestation Letter 6/1/2026 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA ATTN.: Reviewing Engineer FCC ID: 2BV8O-CABRW1CWG Dongguan Jadus Electronics Co., Ltd. (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Note: If the equipment for which the applicant seeks authorization is produced by any of the entities identified on the current Covered List, the applicant should include an explanation on why the equipment is not “covered” equipment. Dongguan Jadus Electronics Co., Ltd. (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing “covered” equipment. Dongguan Jadus Electronics Co., Ltd. (“the applicant”) certifies that the equipment for which authorization is sought does not include cybersecurity or anti-virus software produced or provided by Kaspersky Lab, Inc. or any of its successors and assignees, including equipment with integrated Kaspersky Lab, Inc. (or any of its successors and assignees) cybersecurity or anti-virus software pursuant to DA-24-886 and KDB 986446 D01 Covered Equipment Guidance section B(2a). Signed: Printed name: Mike Huang Title: Manager Company Name: Dongguan Jadus Electronics Co., Ltd. Date: 6/1/2026

Dongguan Jadus Electronics Co., Ltd. U.S. Agent Letter of Attestation To: Federal Communications Commission 7435 Oakland Mills Road, Columbia, MD 21046, USA Date: June 1, 2026 Ref: Attestation Statement – Part 2.911(d)(7) filing FCC ID: 2BV8O-CABRW1CWG Dongguan Jadus Electronics Co., Ltd.(“the applicant”) certifies that, as of the date of the filing of the application, CLF Import and Export Limited (“the agent”) is our designated U.S. agent for service of process for the above reference FCC ID. The applicant accepts to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. The applicant further acknowledges it is our responsibility to inform the FCC whenever the agent information changes. CLF Import and Export Limited ("the agent) understand it is the agent's obligation to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and email address. Designated U.S. Agent Company Name: CLF Import and Export Limited FRN: 0033489683 Address: 1312 17th Street #692, Denver, CO 80202, United States Signature: Contact Person: David Chen Tel: +1 949 254 2565 Email: [email protected] Applicant Dongguan Jadus Electronics Co., Ltd. FRN: 0038450110 Address: No. 222, Changfu West Road, Qiufu Road, Dalang Town, Dongguan City, Guangdong Province, China Signature: Contact Person: Mike Huang Tel: 15119204237 Email: [email protected]

DATE: June 1, 2026 Federal Communications Commission Authorization & Evaluation Division 7345 Oakland Mills Road Columbia, Maryland 21046 Authority to Act as Agent On our behalf, I appoint Shenzhen CCUT Quality Technology Co., Ltd. (1F, Building 35, Changxing Technology Indstrl Park Changzhen Community, Yutang Street,Shenzhen,China) to act as our agent in the preparation of this application for equipment certification. I certify that submitted documents properly describe the device or system for which equipment certification is sought. I also certify that each unit manufactured, imported or marketed, as defined in the Federal Communications Commission’s regulations will have affixed to it a label identical to that submitted for approval with this application. For instances where our authorized agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for certification, still resides with Dongguan Jadus Electronics Co., Ltd. (No. 222, Changfu West Road, Qiufu Road, Dalang Town, Dongguan City, Guangdong Province, China). <Signature> Name: Mike Huang Title: Manager Company: Dongguan Jadus Electronics Co., Ltd.

Date: June 1, 2026 Federal Communications Commission Authorization & Evaluation Division 7345 Oakland Mills Road Columbia, Maryland 21046 RE: LETTER OF AGENT AUTHORIZATION To Whom It May Concern: We, the undersigned, hereby authorize Compliance Testing, LLC to act on our behalf in all matters relating to application for equipment authorization, including the signing of all documents relating to these matters. We also hereby certify that no party to the application authorized hereunder is subject to the denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C.853(a). Sincerely, <Signature> Name: Mike Huang Title: Manager Company: Dongguan Jadus Electronics Co., Ltd.

DATE: June 1, 2026 Equipment Autorisation Division Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: 2BV8O-CABRW1CWG Product Name: Phone & Watch Cable Request for Confidentiality Pursuant to Sections 0.457 and 0.459 of the commission’s rules, we hereby request that the following documents be held confidential: (List here the documents for which you are seeking confidentiality – for example ...) • Schematics • Block diagram • Operation description These materials contain trade secrets and proprietary information and are not customarily released to the public. The public disclosure of this information might be harmful to the company and provide unjustified benefits to our competitors. <Signature> Name: Mike Huang Title: Manager Company: Dongguan Jadus Electronics Co., Ltd.

Report No: SSP26040693-1E FCC ID: 2BV8O-CABRW1CWG Annex A. EUT External Photos EUT View 1 Model: CABRW1CWG EUT View 2 Report No: SSP26040693-1E FCC ID: 2BV8O-CABRW1CWG EUT View 3 EUT View 4 Report No: SSP26040693-1E FCC ID: 2BV8O-CABRW1CWG EUT View 5 EUT View 6

Report No: SSP26040693-1E FCC ID: 2BV8O-CABRW1CWG Annex D. Label FCC Label Sample Label Size : 20mm*20mm FCC Label Specifications Text is Black in color and is justified. Labels are printed in indelible ink on permanent adhesive backing or silk-screened onto the EUT or shall be affixed at a conspicuous location on the EUT. Where the EUT is constructed in two or more sections connected by wires and marketed together, the above statement is required to be affixed only to the main control unit. When the EUT is so small or for such use that it is not practicable to place the statement on it, the above information shall be placed in a prominent location in the instruction manual or pamphlet supplied to the user or, alternatively, shall be placed on the container in which the device is marketed. FCC Label Location

Report No: SSP26040693-1E FCC ID: 2BV8O-CABRW1CWG Annex B. EUT Internal Photos EUT View 1 EUT View 2 Coil ANT Report No: SSP26040693-1E FCC ID: 2BV8O-CABRW1CWG EUT View 3

Report No: SSP26040693-2H FCC Test Report Page 1 of 11 RF Exposure Report FCC ID: 2BV8O-CABRW1CWG Report No. : SSP26040693-2H Applicant : Dongguan Jadus Electronics Co., Ltd. Product Name : Phone & Watch Cable Model Name : CABRW1CWG Test Standard : FCC CFR 47 PART 1, 1.1310 Date of Issue : 2026-05-21 Shenzhen CCUT Quality Technology Co., Ltd. 1F, Building 35, Changxing Technology Industrial Park, Yutang Street, Guangming District, Shenzhen, Guangdong, China; (Tel.:+86-755-23406590 website: www.ccuttest.com) This test report is limited to the above client company and the product model only. It may not be duplicated without prior permitted by Shenzhen CCUT Quality Technology Co., Ltd. Report No: SSP26040693-2H FCC Test Report Page 2 of 11 Test Report Basic Information Applicant..................................: Dongguan Jadus Electronics Co., Ltd. Address of Applicant...............: No. 222, Changfu West Road, Qiufu Road, Dalang Town, Dongguan City, Guangdong Province, China Manufacturer..........................: Dongguan Jadus Electronics Co., Ltd. Address of Manufacturer........: No. 222, Changfu West Road, Qiufu Road, Dalang Town, Dongguan City, Guangdong Province, China Product Name.........................: Phone & Watch Cable Brand Name.............................: AXS Main Model..............................: CABRW1CWG Test Standard..........................: FCC CFR 47 PART 1, 1.1310 KDB 680106 D01 Wireless Power Transfer v04 Date of Test .............................: 2026-05-08 to 2026-05-13 Test Result...............................: PASS Tested By ................................: (Colin Chen) Reviewed By............................: (Lorzix Luo) Authorized Signatory............: (Lahm Peng) Note : This test report is limited to the above client company and the product model only. It may not be duplicated without prior permitted by Shenzhen CCUT Quality Technology Co., Ltd.. All test data presented in this test report is only applicable to presented test sample. Report No: SSP26040693-2H FCC Test Report Page 3 of 11 CONTENTS 1. General Information ....................................................................................................................................................5 1.1 Product Information .............................................................................................................................................5 1.2 Test Setup Information..........................................................................................................................................6 1.3 Test Facilities ........................................................................................................................................................6 1.4 List of Measurement Instruments ..........................................................................................................................7 1.5 Measurement Uncertainty .....................................................................................................................................7 2. RF Exposure .................................................................................................................................................................8 2.1 Standard and Limit................................................................................................................................................8 2.2 Test Procedures ....................................................................................................................................................8 2.3 Test Data and Results ............................................................................................................................................9 Annex A. Test Photos ..................................................................................................................................................... 11 Report No: SSP26040693-2H FCC Test Report Page 4 of 11 Revision History Revision Issue Date Description Revised By V1.0 2026-05-21 Initial Release Lahm Peng Report No: SSP26040693-2H FCC Test Report Page 5 of 11 1. General Information 1.1 Product Information Product Name: Phone & Watch Cable Trade Name: AXS Model Name: CABRW1CWG Rated Voltage: Max 2.5W for IW & SW; C-To-C supports 20V/3A/60W (MAX); C-To Apple Watch supports 5V/0.5A/2.5W (MAX); C-To Samsung Watch supports 5V/0.5A/2.5W (MAX); C-To C + Apple Watch supports 20V/3A/60W + 2.5W; C-To C + Samsung Watch (SW) supports 20V/3A/60W + 2.5W Test Sample No: SSP26040693-1 Hardware Version: V1.0 Software Version: V1.0 Note 1: The test data is gathered from a production sample, provided by the manufacturer. Wireless Specification Wireless Standard: WPC (QI) Operating Frequency: 110.5-205kHz/310-340kHz Modulation: ASK Antenna Gain: 0dBi Type of Antenna: Coil Antenna Type of Device: Portable Device Mobile Device Report No: SSP26040693-2H FCC Test Report Page 6 of 11 1.2 Test Setup Information List of Test Modes Test Mode Description Remark TM1 Wireless charging 2.5W (Apple Watch) - TM2 Wireless charging 2.5W (Samsung Watch) - Note: All modes have been tested and only the worst mode TM1 and TM2 data is represented in the report. List and Details of Auxiliary Cable Description Length (cm) Shielded/Unshielded With/Without Ferrite - - - - List and Details of Auxiliary Equipment Description Manufacturer Model Serial Number Adapter UGREEN CD289 90324 Apple Watch iPhone A2855 GK46LFW525 Samsung Watch Samsung SM-L310 - 1.3 Test Facilities Laboratory Name: Shenzhen CCUT Quality Technology Co., Ltd. 1F, Building 35, Changxing Technology Industrial Park, Yutang Street, Guangming District, Shenzhen, Guangdong, China CNAS Laboratory No.: L18863 A2LA Certificate No.: 6983.01 FCC Registration No: 583813 ISED Registration No.: CN0164 Report No: SSP26040693-2H FCC Test Report Page 7 of 11 1.4 List of Measurement Instruments Description Manufacturer Model Serial Number Cal. Date Due. Date Electromagn…

Text truncated - open the document above for the full version.

Confirmation Letter Customer Name: Shenzhen Xinpin Innovation Electronic Technology Co., Ltd. Customer Part No.: ARW-Q-XQ-081 Our Part No.: RC-G25-2.5-7.6UH-3400GS-8MM (Flip Coil) Sample Delivery Date: November 19, 2025 Supplier: Dongguan Jieruisi Technology Co., Ltd. Drawn by: Lu Lin Reviewed by: Deng Xianggui Approved by: Lu Rusheng Customer Name Customer Part No. Our Part No. Revision Date Xinpin Innovation ARW-Q-XQ- 081 RC-G25-2.5-7.6UH- 3400GS-8MM A0 2025.11.19 Xinpin Innovation ARW-Q-XQ- 081 RC-G25-2.5-7.6UH-3400GS- 8MM A0 2025.11.19 一、Plane Structure Drawing: Uni :MM 二、 Product Parameters： Pin Position Wire Diameter Turns Remarks 1 - 2 0.08*24P 14T Hot-air Twisted Wire 三、 Technical Requirements: 1.Secure all wire starts and ends to prevent wire loosening, breakage and other defects. 2.Trim excess wire ends per customer requirements and tin the terminals; the tinning depth shall be uniformly 2±1MM. 3.Apply an appropriate amount of white adhesive on the magnetic sheet, attach the coil, and keep the product surface clean and tidy during the 審核 N M O P O N 6±0.5 5±0.3 8±1 Q 5.9±0.2 Q A C G K J I H P F L 1 2 1 2 B D E A B C D E F H I J 5±0.1 2±0.1 2.0±1 15.0±0.2 20.5±0.5 21.5±0.2 23.5±0.2 25.0±0.2 2.5±0.15 2.4±0.1 K 8±0.2 L 8.0±0.1 14.5±0.1 G M whole process. 4.The soft magnetic sheets used shall be with round holes and free of damage. 5.Additional process (per customer requirement): Install a 5*2 magnet on the through-hole rubber column in the middle of the finished product, attach 20101.0MM diameter foam double-sided tape on the back of the finished product, then complete packaging. 四、 Electrical Parameters: 1.Inductance Value & Q Factor: PIN 1-2 = 7.6uH ±0.3UH Q Factor ≥ 25 The above inductance and Q factor are tested by QuanHua 1062A tester at a standard condition of 100KHZ/1.0Vrms, or equivalent testing equipment. Total Thickness: 5.9 ± 0.2MM 我司型號 五、 Bill of Materials (BOM)： No. NameMaterial SpecificationSupplierRemarks 1 Hot-air Twisted Wire 0.08×24P Weihan or equivalent / 2 Magnetic Sheet G25 Soft Substrate Tiantong or equivalent Center hole: 8.0mm 3 Tin High-temperature & Environmental-friendly Qiandao or equivalent / 4 White Adhesive BY882 Baoyue or equivalent / 5 Magnet5*2*3400±100GS // 6 Through- hole Rubber Column Φ8*6*5MM / Milky white 7 Back Adhesive Tape Φ20*10*1.0MM / 审核

Report No: SSP26040693-1E FCC Test Report Page 1 of 30 FCC TEST REPORT FCC ID: 2BV8O-CABRW1CWG Report No. : SSP26040693-1E Applicant : Dongguan Jadus Electronics Co., Ltd. Product Name : Phone & Watch Cable Model Name : CABRW1CWG Test Standard : FCC Part 15 Subpart C Date of Issue : 2026-05-21 Shenzhen CCUT Quality Technology Co., Ltd. 1F, Building 35, Changxing Technology Industrial Park, Yutang Street, Guangming District, Shenzhen, Guangdong, China; (Tel.:+86-755-23406590 website: www.ccuttest.com) This test report is limited to the above client company and the product model only. It may not be duplicated without prior permitted by Shenzhen CCUT Quality Technology Co., Ltd. Report No: SSP26040693-1E FCC Test Report Page 2 of 30 Test Report Basic Information Applicant..................................: Dongguan Jadus Electronics Co., Ltd. Address of Applicant...............: No. 222, Changfu West Road, Qiufu Road, Dalang Town, Dongguan City, Guangdong Province, China Manufacturer..........................: Dongguan Jadus Electronics Co., Ltd. Address of Manufacturer........: No. 222, Changfu West Road, Qiufu Road, Dalang Town, Dongguan City, Guangdong Province, China Product Name.........................: Phone & Watch Cable Brand Name.............................: AXS Model Name...........................: CABRW1CWG Test Standard..........................: FCC Part 15 Subpart C ANSI C63.4-2014 ANSI C63.10-2020 Date of Test .............................: 2026-05-08 to 2026-05-13 Test Result...............................: PASS Tested By ................................: (Colin Chen) Reviewed By............................: (Lorzix Luo) Authorized Signatory............: (Lahm Peng) Note : This test report is limited to the above client company and the product model only. It may not be duplicated without prior permitted by Shenzhen CCUT Quality Technology Co., Ltd.. All test data presented in this test report is only applicable to presented test sample. Report No: SSP26040693-1E FCC Test Report Page 3 of 30 CONTENTS 1. General Information ....................................................................................................................................................5 1.1 Product Information .............................................................................................................................................5 1.2 Test Setup Information..........................................................................................................................................6 1.3 Compliance Standards ...........................................................................................................................................7 1.4 Test Facilities ........................................................................................................................................................7 1.5 List of Measurement Instruments ..........................................................................................................................8 1.6 Measurement Uncertainty .....................................................................................................................................8 2. Summary of Test Results .............................................................................................................................................9 3. Antenna Requirement ............................................................................................................................................... 10 3.1 Standard and Limit.............................................................................................................................................. 10 3.2 Test Result .......................................................................................................................................................... 10 4. Conducted Emissions ................................................................................................................................................ 11 4.1 Standard and Limit.............................................................................................................................................. 11 4.2 Test Procedure.................................................................................................................................................... 11 4.3 Test Data and Results .......................................................................................................................................... 12 5. Radiated Emissions ................................................................................................................................................... 17 5.1 Standard and Limit.............................................................................................................................................. 17 5.2 Test Procedure.................................................................................................................................................... 17 5.3 Test Data and Results .......................................................................................................................................... 19 6. Occupied Bandwidth ................................................................................................................................................. 28 6.1 Standard and Limit.............................................................................................................................................. 28 6.2 Test Procedure.................................................................................................................................................... 28 6.3 Test Data and Results .......................................................................................................................................... 28 Report No: SSP26040693-1E FCC Test Report Page 4 of 30 Revision H…

Text truncated - open the document above for the full version.

Report No: SSP26040693-1E FCC ID: 2BV8O-CABRW1CWG Annex C. Test Photos Conducted Emission Test View 1 Conducted Emission Test View 2 Report No: SSP26040693-1E FCC ID: 2BV8O-CABRW1CWG Radiated Emission Test View 3 Radiated Emission Test View 4 Report No: SSP26040693-1E FCC ID: 2BV8O-CABRW1CWG Radiated Emission Test View 5 Radiated Emission Test View 6