2BV99-QC10Ai InteIIigent Camera

Guangdong Mingshi Intelligent Technology Co.,Ltd Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 [June 5, 2026] U.S. Agent Designation [Guangdong Mingshi Intelligent Technology Co.,Ltd] acknowledges their consent for the following contact located in the United States to act as their agent for service of process for the equipment for which authorization is sought FCC ID: 2BV99-QC10 Name and company of U.S. agent: [GLOCERTS TECHNOLOGY INC] Physical U.S. address of agent: [19784 SUNKISSED RIDGE DR, RIVERSIDE, CA 92507] FRN of U.S. agent: [0036339737] Email address of U.S. agent: [[email protected]] Telephone of U.S.agent: (626) 588-8039 [GLOCERTS TECHNOLOGY INC] acknowledges their obligation to accept service of process on behalf of [Guangdong Mingshi Intelligent Technology Co.,Ltd]. [Guangdong Mingshi Intelligent Technology Co.,Ltd] with the FRN [0038463535] accepts its obligation to maintain an agent for service of process in the United States for no less than 1 year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. By signing this form, we confirm the above and that we are aware of the application requirements listed under § 2.911(d)(7). The information provided in this letter is based on the referenced rule parts of Title 47 of the CFR as well as KDB 986446 D01. Sincerely, Signature Signature [Feng Chou] [Huiying Fan] [Manager] [Director] [Guangdong Mingshi Intelligent Technology Co.,Ltd] [GLOCERTS TECHNOLOGY INC]

Guangdong Mingshi Intelligent Technology Co.,Ltd (June 5, 2026) Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: Attestation Statements Part 2.911(d)(5)(i) request for FCC ID:2BV99-QC10 [Guangdong Mingshi Intelligent Technology Co.,Ltd] (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. We also certify that, as of the date of the filing of the application, the equipment does not utilize cyber-security or anti-virus software from Kaspersky Lab, Inc, or any of its successors and assignees, which is also on the “covered list”. Sincerely, (Applicant signature) (Applicant printed name)Feng Chou Guangdong Mingshi Intelligent Technology Co.,Ltd (June 5, 2026) Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: Attestation Statements Part 2.911(d)(5)(ii) request for FCC ID:2BV99-QC10 [Guangdong Mingshi Intelligent Technology Co.,Ltd] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Sincerely, (Applicant signature) (Applicant printed name)Feng Chou

Guangdong Mingshi Intelligent Technology Co.,Ltd Model Difference Data:June 5, 2026 Product description: Ai InteIIigent Camera Model name: QC-10, QC-16, QC-16-2, MG2, QC3, MG5 Trade Name: N/A FCC ID: 2BV99-QC10 All the model are the same circuit and RF module, only the model names are different. Regards Sincerely Client’s signature : Client’s name / title : Feng Chou(Manager) Contact information / address:Room 204, Building 7, No. 24 Guangyu Road, Sicun, Tangxia Town, Dongguan City, Guangdong Province, China

Guangdong Mingshi Intelligent Technology Co.,Ltd (June 5, 2026) Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: CONFIDENTIALITY REQUEST FOR (Ai InteIIigent Camera / QC-10, QC-16, QC-16-2, MG2, QC3, MG5 / FCC ID: 2BV99-QC10 ) To Whom It May Concern: This letter serves as an official request for confidentiality under sections 0.457 and 0.459 of CFR 47. We have requested that the Exhibits Long-Term Confidentiality Short-Term Confidentiality NOTE 2 ID Label/Location No No Attestation Statement No No External Photos No ☐ Block Diagram ☒ ☐ Schematics ☒ ☐ Test Report No No Test Setup Photos No ☐ User’s Manual ☐ NOTE 1 ☒ Internal Photos ☐ NOTE 1 ☒ Parts List / Tune Up ☐ ☐ RF Exposure Info No No Operational Description ☒ ☐ Cover Letter(s) No No SDR Software / Security Info ☐ No required to be submitted with this application be permanently withheld from public review. Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. Please contact me if there is any information you may need. Sincerely, Signature: Name: Feng Chou Title: Manager

Guangdong Mingshi Intelligent Technology Co.,Ltd (June 5, 2026) Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: LETTER OF AGENT AUTHORIZATION To Whom It May Concern: We, the undersigned, hereby authorize (Shenzhen CTB Testing Technology Co., Ltd.) to act on our behalf in all matters relating to application for equipment authorization, including the signing of all documents relating to these matters. We also hereby certify that no party to the application authorized hereunder is subject to the denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C.853(a). This agreement expires one year from the current date. Sincerely, Signature: Name: Feng Chou Title: Manager

Shenzhen CTB Testing Technology Co., Ltd. Report Tel: 4008-707-283 Web: http://www.ctb-lab.net Page 1 of 3 Model: QC-10 External Photos Shenzhen CTB Testing Technology Co., Ltd. Report Tel: 4008-707-283 Web: http://www.ctb-lab.net Page 2 of 3 Shenzhen CTB Testing Technology Co., Ltd. Report Tel: 4008-707-283 Web: http://www.ctb-lab.net Page 3 of 3

FCC ID LABEL: Label Location: FCC ID: 2BV99-QC10 Model No.: QC-10

FCC §15.247 (i), §2.1091 – RF Exposure FCC ID: 2BV99-QC10 Applied procedures / limit According to FCC §15.247(i) and §1.1307(b)(1), systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy level in excess of the Commission’s guidelines. Limits for Occupational / Controlled Exposure Frequency Range (MHz) Electric Field Strength (E) (V/m) Magnetic Field Strength (H) (A/m) Power Density (S) (mW/ cm 2 ) Averaging Time |E| 2 ,|H| 2 or S (minutes) 0.3-3.0 614 1.63 (100)* 6 3.0-30 1842 / f 4.89 / f (900 / f)* 6 30-300 61.4 0.163 1.0 6 300-1500 F/300 6 1500-100,000 5 6 Note: ƒ is frequency in MHz * = Power density limit is applicable at frequencies greater than 100 MHz Limits for General Population / Uncontrolled Exposure Frequency Range (MHz) Electric Field Strength (E) (V/m) Magnetic Field Strength (H) (A/m) Power Density (S) (mW/ cm 2 ) Averaging Time |E| 2 ,|H| 2 or S (minutes) 0.3-1.34 614 1.63 (100)* 30 1.34-30 824/f 2.19/f (180/f)* 30 30-300 27.5 0.073 0.2 30 300-1500 F/1500 30 1500-100,000 1.0 30 Note: f = frequency in MHz * = Plane-wave equivalent power density MPE PREDICTION Predication of MPE limit at a given distance, Equation from OET Bulletin 65, Edition 97-01 Where: S = power density P = power input to antenna G = power gain of the antenna in the direction of interest relative to an isotropic radiator R = distance to the center of radiation of the antenna,R=20cm Test Result of RF Exposure Evaluation BT+WIFI supported simultaneous transmission: BT+2.4GWIFI: ∑MPE Ratio =0.00050/1+0.01268/1=0.01318≤1, So passed. Modes& Channel Freq. (MHz) Tune up Produce power Maximu m peak output power (dBm) Output power to antenna (mW) Antenna Gain (numeric) Power Density (S) (mW/ cm2) Limit (mW / cm2 ) Result BLE GFSK & MCH 1±1 2 1.5849 1.5996 (2.04dBi) 0.00050 1 Pass 2.4G WIFI 802.11n(H T40)& LCH 15±1 16 39.8107 1.5996 (2.04dBi) 0.01268 1 Pass

http://www.szsyjc.co ShenzhenYingjiachuangElectronicTe- chnologyCo.,Ltd. m Page1of7 HeadquartersAddress:BuildingC,HongyuGuangmingValley,No.11YoumagangRoad,MatianStreet, GuangmingDistrict,Shenzhen DongguanBranchFactory:No.2,YinheThirdRoad,Shishuikou,QiaotouTown,DongguanCity,Yingjia ChuangIndustrialPark HangzhouOffice:Room212,BuildingB,DahuaJianghongInternationalInnovationPark,No.369IoTStreet, BinjiangDistrict,Hangzhou;MianyangOffice:Room4F-34,WanxiangHigh-TechInternational,No.35 MianxingEastRoad,High-TechZone,MianyangCity,SichuanProvince Phone:0755-27810060Fax:0755-27810057URL：www.szsyjc.com CUSTOMERNAME CustomerName CUSTOMERP/N:Cu- stomerPartNumber PARTNAME 2.4GBoard-mountedAntenna P/NP/N APPROVALREV. Orderoftheedition A0 DELiveryDATE:Date ofsampledelivery January10,2022 Preparedbytheorganizer WuJiaxiong -checkedby:Audit FangWenfeng APPROVEDBY:Approval Shawhan CustomerApproved CustomerAcknowledgment Preparedbytheorg- anizer -checkedby:Reviewer Approvedby:Appr- oval http://www.szsyjc.co ShenzhenYingjiachuangElectronicTe- chnologyCo.,Ltd. m Page2of7 Catalogue 1、Cover ····································································· 1 2、catalogue ································································· 2 3、ReviseResumeForm ···················································3 4、AntennaPlanView ·····················································4 5、AntennaTechnicalParameters ········································5 6、EnvironmentalPerformanceTesting ·································5 7、AntennaPerformanceTestDiagram ·································6 8、2D、3Dtestdata（2.4G） ········································6-7 ShenzhenYingjiachuangElectronicTechnologyCo., Ltd. http : //www . szsyjc . com Page3of7 ReviseResume: EditionChangeDetailsandReasons Date Release A/0FirstEditionRelease January10,2022 http://www.szsyjc.co ShenzhenYingjiachuangElectronicTe- chnologyCo.,Ltd. m Page4of7 AntennaPlanView: http://www.szsyjc.co ShenzhenYingjiachuangElectronicTe- chnologyCo.,Ltd. m Page5of7 AntennaTechnicalSpecificationsandEnvironmentalTesting: ElectricalTechnicalParameters ElectricalPerformanceParameters ElectricalSpecifications Frequencyrange2400-2500MHzFrequencyRange2400-2500MHz Voltagestanding-waveratio＜1.92VSWR＜1.92 Inputimpedence50ΩInputImpedance50Ω DirectionOmnidirectionalDirectionAll Gain2.04dBiGain2.04dBi MechanicalIndicators MechanicalSpecifications InterfaceFormatOPENInputconnectorOPEN Workingtemperature-20°C~+70°CWorkingTemperature-20°C~+70°C WorkingHumidity20%~80%WorkingHumidity20%~80% EnvironmentalPerformanceTest: ProjectTestconditionSpecifications StorageEnvironment Testtemperature,humidity,andairpressureasfollowsunlessotherwisespecified: 1.Temperaturerange:-20°Cto+70°C 2.Relativehumidityrangesfrom45%to85%. 3.Theairpressurerangesfrom86kPato106kPa. Theelectricalmechanicalperformanceisnormal. Thermocycling Performfivecyclesbetween70°Cand-20°C,followedbyincubation undernormalconditionsfor1–2hours,andinspectthevisualquality. Thedimensionsshallcomplywiththe specifiedrequirementsandmeetthe requirementsformechanicalandelectrical performance. ทนancetoconstanthumi- dityandtemperaturetest Relativehumidity:95±3%;Testtemperature:40°C.Aftercontinuous exposurefor2hours,theelectricalpropertiesshallbemeasured within5minutesafterspecimenremoval.Undernormalconditions, thespecimenshallbeexaminedforvisualqualityafter1–2hours. Thedimensionsshallcomplywiththe specifiedrequirementsandmeetthe requirementsformechanicalandelectrical performance. Vibrationtest Frequencyrange:10–55Hz;Displacementamplitude:0.35mm; Accelerationamplitude:50.0m/s;Numberofscancycles:30 Theelectricalmechanicalperformanceisnormal. Fall-downtestTheobjectwasallowedtofallfreelythreetimesfromaheightof1meteralongmutuallyperpendicularaxes.Theelectricalmechanicalperformanceisnormal. http://www.szsyjc.co ShenzhenYingjiachuangElectronicTe- chnologyCo.,Ltd. m Page6of7 AntennaPerformanceTestDiagram: 2D.3Dtestdata（2.4G）： FrequencyEfficiency(%)Gain.(dBi) 2400MHz 44.361.7 2410MHz 46.951.87 2420MHz 45.271.74 2430MHz 47.351.82 2440MHz 48.161.82 2450MHz 54.12.04 2460MHz 52.321.93 2470MHz 50.711.71 2480MHz 48.421.82 2490MHz 47.11.75 2500MHz 47.971.71 http://www.szsyjc.co ShenzhenYingjiachuangElectronicTe- chnologyCo.,Ltd. m Page7of7 Phi02Dgraph： Phi902Dgraph Theta902D 3D2400 ： 3D2450 ： 3D2500

Report Tel: 4008-707-283 Web: http://www.ctb-lab.net Page 1 of 36 TEST REPORT Compiled by: Reviewed by: Approved by: Kai Chen Martin Feng Bin Mei / Director Note: If there is any objection to the inspection results in this report, please submit a written report to the company within 15 days from the date of receiving the report. The test report is effective only with both signature and specialized stamp. This result(s) shown in this report refer only to the sample(s) tested. The tested sample(s) and the sample information are provided by the applicant. The authenticity, accuracy, and completeness of the provided information are the sole responsibility of the applicant. Without written approval of Shenzhen CTB Testing Technology Co., Ltd. this report can’t be reproduced except in full. The result decision rules of our laboratory are based solely on the direct comparison between the actual measured values of test results and the standard limits, without considering the measurement uncertainty.“” indicates the testing items were fulfilled by subcontracted lab. “” indicates the items are not in CNAS accreditation scope. Test item description: Ai InteIIigent Camera FCC ID: 2BV99-QC10 Trademark(s): N/A Model/Type reference: QC-10, QC-16, QC-16-2, MG2, QC3, MG5 Applicant’s name: Guangdong Mingshi Intelligent Technology Co.,Ltd Address: Room 204, Building 7, No. 24 Guangyu Road, Sicun, Tangxia Town, Dongguan City, Guangdong Province, China Manufacturer: Guangdong Mingshi Intelligent Technology Co.,Ltd Address: Room 204, Building 7, No. 24 Guangyu Road, Sicun, Tangxia Town, Dongguan City, Guangdong Province, China Prepared By: Shenzhen CTB Testing Technology Co., Ltd. Address: 1&2/F., Building A, No.26, Xinhe Road, Xinqiao, Xinqiao Street, Bao'an District, Shenzhen, Guangdong, China Sample Received Date: May. 18, 2026 Sample tested Date: May. 18, 2026 to May. 26, 2026 Issue Date: May. 26, 2026 Report No.: CTB26051804101RF01 Test Standards FCC CFR Title 47 Part 15 Subpart C Section 15.247 ANSI C63.10:2020 Test Results PASS Remark: This is Bluetooth radio test report. Shenzhen CTB Testing Technology Co., Ltd. Report No.: CTB26051804101RF01 Report Tel: 4008-707-283 Web: http://www.ctb-lab.net Page 2 of 36 TABLE OF CONTENT Test Report Declaration Page 1. VERSION .......................................................................................................................................... 3 2. TEST SUMMARY ............................................................................................................................. 4 3. MEASUREMENT UNCERTAINTY ................................................................................................... 5 4. PRODUCT INFORMATION AND TEST SETUP ............................................................................. 6 4.1 Product Information ............................................................................................................................ 6 4.2 Test Setup Configuration ................................................................................................................... 6 4.3 Support Equipment ............................................................................................................................ 6 4.4 Channel List ....................................................................................................................................... 7 4.5 Test Mode .......................................................................................................................................... 7 4.6 Test Environment ............................................................................................................................... 7 5. TEST FACILITY AND TEST INSTRUMENT USED ......................................................................... 8 5.1 Test Facility ........................................................................................................................................ 8 5.2 Test Instrument Used ......................................................................................................................... 8 6. AC POWER LINE CONDUCTED EMISSION .................................................................................. 11 6.1 Block Diagram Of Test Setup ........................................................................................................... 11 6.2 Limit .................................................................................................................................................. 11 6.3 Test procedure ................................................................................................................................. 11 6.4 Test Result ....................................................................................................................................... 13 7. RADIATED SPURIOUS EMISSION ............................................................................................... 15 7.1 Block Diagram Of Test Setup ........................................................................................................... 15 7.2 Limit .................................................................................................................................................. 15 7.3 Test procedure ................................................................................................................................. 15 7.4 Test Result ....................................................................................................................................... 17 8. BAND EDGE AND RF COUNDUCTED SPURIOUS EMISSIONS ................................................ 24 8.1 Block Diagram Of Test Setup ........................................................................................................... 24 8.2 Limit ......................................................................................................................…

Text truncated - open the document above for the full version.

Report Tel: 4008-707-283 Web: http://www.ctb-lab.net Page 1 of 63 TEST REPORT Compiled by: Reviewed by: Approved by: Kai Chen Martin Feng Bin Mei / Director Note: If there is any objection to the inspection results in this report, please submit a written report to the company within 15 days from the date of receiving the report. The test report is effective only with both signature and specialized stamp. This result(s) shown in this report refer only to the sample(s) tested. The tested sample(s) and the sample information are provided by the applicant. The authenticity, accuracy, and completeness of the provided information are the sole responsibility of the applicant. Without written approval of Shenzhen CTB Testing Technology Co., Ltd. this report can’t be reproduced except in full. The result decision rules of our laboratory are based solely on the direct comparison between the actual measured values of test results and the standard limits, without considering the measurement uncertainty.“” indicates the testing items were fulfilled by subcontracted lab. “ ” indicates the items are not in CNAS accreditation scope. Test item description: Ai InteIIigent Camera FCC ID: 2BV99-QC10 Trademark(s): N/A Model/Type reference: QC-10, QC-16, QC-16-2, MG2, QC3, MG5 Applicant’s name: Guangdong Mingshi Intelligent Technology Co.,Ltd Address: Room 204, Building 7, No. 24 Guangyu Road, Sicun, Tangxia Town, Dongguan City, Guangdong Province, China Manufacturer: Guangdong Mingshi Intelligent Technology Co.,Ltd Address: Room 204, Building 7, No. 24 Guangyu Road, Sicun, Tangxia Town, Dongguan City, Guangdong Province, China Prepared By: Shenzhen CTB Testing Technology Co., Ltd. Address: 1&2/F., Building A, No.26, Xinhe Road, Xinqiao, Xinqiao Street, Bao'an District, Shenzhen, Guangdong, China Sample Received Date: May. 18, 2026 Sample tested Date: May. 18, 2026 to May. 26, 2026 Issue Date: May. 26, 2026 Report No.: CTB26051804101RF02 Test Standards FCC CFR Title 47 Part 15 Subpart C Section 15.247 ANSI C63.10:2020 Test Results PASS Remark: This is WIFI-2.4GHz band radio test report. Shenzhen CTB Testing Technology Co., Ltd. Report No.: CTB26051804101RF02 Report Tel: 4008-707-283 Web: http://www.ctb-lab.net Page 2 of 63 TABLE OF CONTENT Test Report Declaration Page 1. VERSION .......................................................................... 3 2. TEST SUMMARY ................................................................... 4 3. MEASUREMENT UNCERTAINTY ..................................................... 5 4. PRODUCT INFORMATION AND TEST SETUP .......................................... 6 4.1 Product Information .................................................................... 6 4.2 Test Setup Configuration ............................................................... 6 4.3 Support Equipment .................................................................... 6 4.4 Channel List .......................................................................... 7 4.5 Test Mode ............................................................................ 7 4.6 Test Environment ...................................................................... 7 5. TEST FACILITY AND TEST INSTRUMENT USED ....................................... 8 5.1 Test Facility ........................................................................... 8 5.2 Test Instrument Used .................................................................. 8 6. AC POWER LINE CONDUCTED EMISSION ............................................ 11 6.1 Block Diagram Of Test Setup .......................................................... 11 6.2 Limit ................................................................................ 11 6.3 Test procedure ....................................................................... 11 6.4 Test Result .......................................................................... 13 7. RADIATED SPURIOUS EMISSION ................................................... 15 7.1 Block Diagram Of Test Setup .......................................................... 15 7.2 Limit ................................................................................ 15 7.3 Test procedure ....................................................................... 16 7.4 Test Result .......................................................................... 17 8. BAND EDGE AND RF COUNDUCTED SPURIOUS EMISSIONS .......................... 39 8.1 Block Diagram Of Test Setup .......................................................... 39 8.2 Limit ................................................................................ 39 8.3 Test procedure ....................................................................... 39 8.4 Test Result .......................................................................... 40 9. CONDUCTED OUTPUT POWER ..................................................... 48 9.1 Block Diagram Of Test Setup .......................................................... 48 9.2 Limit ................................................................................ 48 9.3 Test procedure ....................................................................... 48 9.4 Test Result .......................................................................... 48 10. 6DB OCCUPIED BANDWIDTH ....................................................... 49 10.1 Block Diagram Of Test Setup ......................................................... 49 10.2 Limit ............................................................................... 49 10.3 Test procedure ...................................................................... 49 10.4 Test Result ......................................................................... 50 11. POWER SPECTRAL DENSITY ...................................................... 55 11.1 Block Diagram Of Test Setup ......................................................... 55 11.2 Limit .............................................…

Text truncated - open the document above for the full version.

Shenzhen CTB Testing Technology Co., Ltd. Report Tel: 4008-707-283 Web: http://www.ctb-lab.net Page 1 of 2 Model: QC-10 Radiated Emission Below 1G Above 1G Shenzhen CTB Testing Technology Co., Ltd. Report Tel: 4008-707-283 Web: http://www.ctb-lab.net Page 2 of 2 Conducted emissions