2BVAK-G0090250GB1800 Portable Power Station

TCB CALL página 1 File FCC ID: 2BVAK-G0090250 Please upload an exhibit that explains how does the TCB verify the new agent information: 1- Is the address of the agent a valid physical US mailing address (not a US post office box, not a virtual mailbox, not P.O. Boxes, not a vacant lot, not a public building, etc.) ○ We have checked if the address exists in a real and potential building (Google maps) + official US register, after this verification and the evidence below we can guarantee the following: not a US post office box not a virtual mailbox not P.O. Boxes not a vacant lot not a public building(note) ► We checked the FCC FRN Search based on the information provided by the grantee. On the official register from : Search | coloradosos.gov TCB CALL página 2 TCB CALL página 3 TCB CALL página 4 TCB CALL página 5 ► CONCLUSION by TCB: The ASOP defined and provided by grantee is VALID and confirmed. Therefore the exhibit "C5266091_X23_Ed1_US_Agent_Letter" included in the file is ok. 2- Is the agent physically located at that valid US address such that the agent can be legally served at that address? Yes , check above 3- Has the listed agent clearly agreed in writing to serve as the agent for the grantee at that address? Yes, it is included in the exhibit "C5266091_X23_Ed1_US_Agent_Letter" >

DDPAI Technology Co., Ltd 2.911(d)(7)USAAgentv1.5 Section 2.911(d)(7) USAAgent for Service of Process Company name: Ten Pao Industrial Co.,Ltd. Address: Room 15,6/F.,Kwong Sang Hong Centre, 151-153 Hoi Bun Road, Kwun Tong, Kowloon,Hongkong ， China FCC ID: 2BVAK-G0090250 2.911(d)(7) USA Designated Agent for Service of Process We, [Ten Pao Industrial Co.,Ltd.] designate [Linkwld LLC] NOTE1 for the purpose of accepting service of process on behalf of the applicant. Applicant consent:We acknowledge our consent to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and email address of the designated agent and acknowledge our acceptance of our obligation to maintain an agent for service of process in the United States for no less than one year after either we the grantee have permanently terminated all marketing and importation of the applicable equipment within the U.S., or at the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. Agent obligation:We acknowledge our obligation to accept service of process in the United States for matters related to the applicable equipment at our physical U.S. address and email address for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or at the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. USA AgentApplicant Company name: Linkwld LLCCompany name: Ten Pao Industrial Co.,Ltd. USA Address: 7595 Technology Way Ste 100, Denver, CO 80237, US Address:Room 15,6/F.,Kwong Sang Hong Centre, 151-153 Hoi Bun Road, Kwun Tong, Kowloon,Hongkong ， China FRN Number: 0033625682Grantee FRN Number: 0038176947 Contact Name: Timothy ZhuFCC Grantee Code: 2BVAK Telephone No: (747) 717-2691Contact Name: Rita Liu Email: [email protected] No: 0752-2312940 Email: [email protected] Signature: Title: Manager Signature: Title: Engineer Date: 2026-07-22Date: 2026-07-22 DDPAI Technology Co., Ltd 2.911(d)(7)USAAgentv1.5 NOTE 1: An applicant located in the United States may designate itself as the agent for service of process. Reference; Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-securi ty-threats-to-the-communications-supply-chain-through-the

Attestation Statement. Old Code: C5266091 24 New Code: 00015544 Ed.3 Change reason: FRN is added to the Applicant information section. 1/1 Ten Pao Industrial Co.,Ltd. TO: Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 The Commission adopted rules that prohibit equipment authorization for “covered” telecommunications equipment and video surveillance equipment produced by entities identified on the Commission’s Covered List 1 , which is periodically updated. See the Covered List for more details. This Attestation Statement is to confirm that we follow the Section 2.911(d)(5)(i)-(ii) Applicant Company name: Ten Pao Industrial Co.,Ltd. Grantee code: 2BVAK FCC ID: 2BVAK-G0090250 FRN: 0038176947 Contact Name: Rita Liu Address: Room 15,6/F.,Kwong Sang Hong Centre, 151-153 Hoi Bun Road, Kwun Tong, Kowloon, Hongkong, China Telephone No: 0752-2312940 Fax No: / Email: [email protected] i. [Ten Pao Industrial Co.,Ltd.] (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. The applicant must sign this certification. ii. [Ten Pao Industrial Co.,Ltd.] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant [is not] (as a specifically named entity or any of its subsidiaries or affiliates) identified on the Covered List as an entity producing “covered” equipment. The applicant must sign this certification. [Ten Pao Industrial Co.,Ltd.] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant [is not] identified on the Covered List as an entity producing “covered” equipment . Date: August 06, 2026 Applicant’s Name: Rita Liu Title: Engineer Signature 1 The Commission’s Covered List is published by the Public Safety and Homeland Security Bureau and posted on the Commission’s website. This Covered List, which is periodically updated, identifies particular equipment, produced by particular entities, that constitutes “covered” equipment. https://www.fcc.gov/supplychain/coveredlist

Ten Pao Industrial Co.,Ltd. Code 00018768 Ed. 1 Item 1. The device is able to install software/program installation? ☐ Yes, go to Item 2. ☒ No. In this case, the rest of the items do not apply. The device cannot support installation of Kaspersky cybersecurity or anti-virus software. Item 2. Technical Requirements for Kaspersky Cybersecurity Software: # General Requirements (For all Devices) Yes / No or N/A Comments 1 Internet connection for activation and updates (For all Operating Systems) N/A # General Requirements (For Windows Devices) Yes / No or N/A Comments 1 Storage: 1500 MB free space on the hard drive N/A Device GB1800 Portable Power Station Company name Ten Pao Industrial Co.,Ltd. Grantee code 2BVAK FCC ID 2BVAK-G0090250 FRN 0038176947 Contact name Rita Liu Address Room 15,6/F.,Kwong Sang Hong Centre, 151-153 Hoi Bun Road, Kwun Tong, Kowloon, Hongkong, China Telephone number 0752-2312940 E-mail [email protected] Chipset/module information ESP32-S3 Operating System (if applicable) N/A Storage Capacity (hard drive or other permanent memory storage, if applicable) N/A 2 2 Operating System: Microsoft Windows 8, 8.1, 10 & 11 Home / Pro / Enterprise Microsoft Windows 7 Starter / Home Basic & Premium / Professional / Ultimate SP1 or higher N/A 3 Processor: 1 GHz or higher (x86 or x64) N/A 4 Memory (RAM)1 GB (32-bit) or 2 GB (64-bit) N/A 5 Screen Resolution: Minimum resolution of 1024 x 768 N/A # General Requirements (For macOS devices) Yes / No or N/A Comments 1 Operating System macOS® 13 – 14 N/A 2 Memory (RAM)4 GB N/A 3 Storage: 3455 MB free space on the hard drive N/A # General Requirements (For Android Devices) Yes / No or N/A Comments 1 Storage: 150 MB free space N/A 2 Operating System: Android™ 10 – 14 N/A 3 Screen Resolution: Minimum resolution of 320 x 480 N/A # General Requirements (for iOS devices) Yes / No or N/A Comments 1 Storage: 150 MB free space N/A 2 Operating System: iOS® 17 N/A # General Requirements (For Linux system) Yes / No or N/A Comments 1 Hard drive: 1 GB of free space N/A 2 CPU: Intel Pentium 1 GHz or higher N/A 3 3 RAM: 1 GB N/A 4 Minimum software requirements: AlmaLinux OS 8 or later; AlterOS 7.5 or later; Astra Linux Common Edition 2.12 or later; CentOS 6.7 or later; Debian GNU/Linux 10.0 or later; EulerOS 2.0 or later; Oracle Linux 7.3 or later ; Red Hat Enterprise Linux 6.7 or later ; Rocky Linux 8.5 or later ; SUSE Linux Enterprise Server 12.5 or later; Ubuntu 12.04 or later ; Uncom OS Home / Business / Education / Enterprise 2.2 or later; ALT Linux Workstaton / Workstation K / Server / Education 8 or later; ROSA Linux Workstation / Server 12 or later ; RED OS 7.3 and later ; N/A After reviewed the technical requirements, is the device capable of supporting the installation of Kaspersky software? ☐ Yes, go to Item 3. ☒ No. In this case, the rest of the items do not apply. The device cannot support installation of Kaspersky software Item 3. Connectivity Capabilities: # Physical Interface Purpose Justification 1 1 The justification field is used to justify why the software cannot be received through that interface. Check the annex for more indications. 4 1 # Wireless Interface Purpose Justification 1 1 After the review of this items, the device: ☒ Cannot support installation of any cybersecurity or anti-virus software on the covered list. ☐ Potentially can operate with any cybersecurity or anti-virus software on the covered list – additional third- party proof is provided to demonstrate compliance with requirements as of 2.911(d)5(i),(ii) – “Proof of Compliance with Covered List Software Requirements” of this document applies Signature: Name: Rita Liu Date: August 06, 2026

TenPaoIndustrialCo.,Ltd. ProductSimilarityDeclaration Productname:GB1800PortablePowerStation Modelname:G0091250,G0080251,G0090250 FCCID:2BVAK-G0090250 We(TenPaoIndustrialCo.,Ltd.)herebystatethatallthemodelsare electricalidenticalincludingthesamesoftwareparameterand hardwaredesign(i.e.,circuitdesign,PCBLayout,RFmodule/circuit, antennatype(s)andantennalocation,componentsonPCB,etc.,), samemechanicalstructureanddesign(includingproductenclosure, materials,etc.,),theonlydifferenceisthemodelname. Signature: Name:RitaLiu Title:Engineer 2026/8/6

C5266091_X10_Ed.2 1/1 TenPaoIndustrialCo.,Ltd. OfficeofEngineeringTechnology FederalCommunicationsCommission 7435OaklandMillsRoad Columbia,MD21046 Date:2026-08-06 Subject:RequestforConfidentiality FCCID:2BVAK-G0090250 ToWhomItMayConcern, Pursuantt ot hep rovisionso fS ections0 .457a nd0 .459ofC ommission'sr ules (47CFR0.457,0.459),wea rer equestingt heCommissiont owithholdt hef ollowing attachment(s)asconfidentialdocumentfrompublicdisclosure. ExhibitsLong-Term Confidentiality Short-TermC onfidentiality NOTE2 IDLabel/LocationNoNo AttestationStatementNoNo ExternalPhotosNo ☒ BlockDiagram ☒☐ Schematics ☒☐ TestReportNoNo TestSetupPhotosNo ☒ User’sManual ☐ NOTE 1 ☒ InternalPhotos ☐ NOTE 1 ☒ ☒ PartsList/TuneUp ☐ RFExposureInfoNoNo OperationalDescription ☒☐ CoverLetter(s)NoNo SDRSoftware/SecurityInfo ☐ No NOTE1:Long-TermConfidentialitymaybepermittedunderspecialconditions(SeeI I.LONG-TERMCONFIDENTIALITY,Section3of KDB726920,uselasti nforce) NOTE2:Short-TermConfidentialitycanberequestedforamaximumof180daysfromthedateofthegrant. Abovementioneddocumentc ontainsdetaileds ystemandequipmentdescriptionare considereda sp roprietaryi nformationi no perationofthee quipment.T hep ublic disclosureofa bovedocumentsmightbeharmfult oourc ompanya ndwouldgive competitoranunfairadvantagei nthemarket. Incaseofs hort-termConfidentiality,theapplicantrequeststheexhibitsselectedabove arewithheldf rompublicviewf oraperiodof___180___daysf romt hedateoft he GrantofEquipmentAuthorizationandpriortomarketing. Iti sourunderstandingt hatallmeasurementt estr eports,FCCI Dl abelf ormatand correspondentduringc ertificationr eviewprocessc annotbegrantedasc onfidential documentsandt hosei nformationwillbeavailablef orpublicr eviewoncet hegrantof equipmentauthorizationi si ssued. C5266091_X10_Ed.2 1/1 Sincerely, Name:RitaLiu Title:Engineer 2026/8/6

C5266091_X8_Ed.1 1/1 Letter of Authorization Ten Pao Industrial Co.,Ltd. Company: Ten Pao Industrial Co.,Ltd. Address: Room 15,6/F.,Kwong Sang Hong Centre, 151-153 Hoi Bun Road, Kwun Tong, Kowloon, Hongkong, China Product Name: GB1800 Portable Power Station Model Number: G0091250, G0080251, G0090250 FCC Identifier: 2BVAK-G0090250 We authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, to act on our behalf on all matters concerning the above named equipment. Any individual within LGAI Technological Center S.A. is authorized to act on our behalf and take action on the application. We declare that authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by LGAI Technological Center S.A. on our behalf shall have the same effect as acts of our own. Name: Rita Liu Date: August 06, 2026 Title: Engineer Signature of applicant:

LabelLocation Confirmtheuseofrealappearancephotosasreferences Labelsize: （ :25cm*W:15cm ） Model：G0091250 Model：G0090250 Model：G0080251

MAXIMUMPERMISSIBLEEXPOSURE KDB447498D01MobileandPortableDevicesRFExposureProceduresand EquipmentAuthorizationPoliciesv06. 2.1091Radiofrequencyradiationexposureevaluation:mobiledevices. AccordingtoFCC1.1310:Thecriterialistedinthefollowingtableshallbeused toevaluatetheenvironmentimpactofhumanexposuretoradiofrequency(RF) Radiationasspecifiedin§1.1307(b) EUTSpecification FCCID2BVAK-G0090250 EUTGB1800PortablePowerStation Frequencyband(Operating)BT:2.402GHz~2.480GHz WLAN:2.412GHz~2.462GHz RLAN:5.180GHz~5.240GHz RLAN:5.260GHz~5.320GHz RLAN: 5.500 GHz~ 5.700 GHz RLAN:5.745GHz~5.825GHz Others: DevicecategoryPortable(<20cmseparation) Mobile(>20cmseparation) Others___ ExposureclassificationOccupational/Controlledexposure GeneralPopulation/Uncontrolledexposure AntennadiversitySingleantenna Multipleantennas Txdiversity Rxdiversity Tx/Rxdiversity Antennagain(Max)3.37dBi EvaluationappliedMPEEvaluation SAREvaluation LimitsforMaximumPermissibleExposure(MPE) Frequency Range(MHz) ElectricField Strength(V/m) MagneticField Strength(A/m) Power Density(mW/cm 2 ) AverageTime (A)LimitsforOccupational/ControlExposures 300-1500----F/3006 1500-100000----56 (B)LimitsforGeneralPopulation/UncontrolExposures 300-1500----F/150030 1500-100000----130 Friistransmissionformula:Pd=(Pout*G)\(4*pi*R2) Where Pd=PowerdensityinmW/cm 2 Pout=outputpowertoantennainMw G=gainofantennainlinearscale Pi=3.1416 R=distancebetweenobservationpointandcenteroftheradiatorincm PdthelimitofMPE.Ifweknowthemaximumgainoftheantennaandtotalpowerinputto theantenna,throughthecalculation,wewillknowthedistancewheretheMPElimitis reached. MeasurementResult OperatingMode Maximum output power (dBm) Tuneup tolerance (dBm) Max.Tuneup Power (dBm) Antenna Gain (dBi) Power densityat 20cm (mW/cm 2 ) Power density Limits (mW/cm 2 ) BLE-3.09-3.09±1-2.093.370.00031 WiFi2.4G14.2014.20±115.203.370.01431 Note:BT&WiFi&WPTcannotsupportsimultaneoustransmission.

Page 1 of 33 FCCTestReport ReportNo.:1811C60019316201 Applicant:TenPaoIndustrialCo.,Ltd. Address: Room15,6/F.,KwongSangHongCentre,151-153 HoiBunRoad,KwunTong,Kowloon,H.K. ProductName:GB1800PortablePowerStation ReportDate:2026-08-31 ShenzhenAnbotekComplianceLaboratoryLimited #检测章# # 资质章 # #报告二维码# ReportNo.:1811C60019316201Page2of33 FCCID:2BVAK-G0090250 Contents 1.GeneralInformation.................................................................................................................................6 1.1.ClientInformation...........................................................................................................................6 1.2.DescriptionofDevice(EUT)..........................................................................................................6 1.3.AuxiliaryEquipmentUsedDuringTest..........................................................................................7 1.4.Operationchannellist....................................................................................................................7 1.5.DescriptionofTestModes.............................................................................................................7 1.6.MeasurementUncertainty.............................................................................................................8 1.7.AdditionalInstructions....................................................................................................................8 1.8.TestSummary................................................................................................................................9 1.9.DescriptionofTestFacility...........................................................................................................10 1.10.Disclaimer..................................................................................................................................10 1.11.TestEquipmentList....................................................................................................................11 2.Antennarequirement..............................................................................................................................13 2.1.Conclusion...................................................................................................................................13 3.ConductedEmissionatACpowerline..................................................................................................14 3.1.EUTOperation.............................................................................................................................14 3.2.TestSetup....................................................................................................................................14 3.3.TestData......................................................................................................................................15 4.6dBBandwidth.......................................................................................................................................17 4.1.EUTOperation.............................................................................................................................17 4.2.TestSetup....................................................................................................................................17 4.3.TestData......................................................................................................................................17 5.MaximumConductedOutputPower......................................................................................................18 5.1.EUTOperation.............................................................................................................................18 5.2.TestSetup....................................................................................................................................18 5.3.TestData......................................................................................................................................18 6.PowerSpectralDensity..........................................................................................................................19 6.1.EUTOperation.............................................................................................................................19 6.2.TestSetup....................................................................................................................................19 6.3.TestData......................................................................................................................................19 7.Emissionsinnon-restrictedfrequencybands.......................................................................................20 7.1.EUTOperation.............................................................................................................................20 7.2.TestSetup....................................................................................................................................20 7.3.TestData......................................................................................................................................20 8.Bandedgeemissions(Radiated)..........................................................................................................21 8.1.EUTOperation.............................................................................................................................21 8.2.TestSetup....................................................................................................................................22 8.3.TestData......................................................................................................................................23 9.Emissionsinrestrictedfrequencybands(below1GHz).......................................................................24 9.1.EUTOperation...........................…

Text truncated - open the document above for the full version.

OTA TEST REPORT TA Technology (Shanghai) Co., Ltd. tested the above equipment in accordance with the requirements in ANSI/IEEE Std 149-2008. The test results show that the equipment tested is capable of demonstrating compliance with the requirements as documented in this report. Prepared by: Peng Tao Approved by: Kai Xu TA Technology (Shanghai) Co., Ltd. No.145, Jintang Rd, Tangzhen Industry Park, Pudong Shanghai, China TEL: +86‐021‐50791141/2/3 FAX: +86‐021‐50791141/2/3‐8000 Applicant Espressif System (Shanghai) Co.,Ltd Product ESP32-C3-WROOM-02 Model ESP-ANT B Report No. Y2102A0260-T3 Issue Date March 9, 2021 OTA Test Report Report No: Y2102A0260-T3 TA Technology (Shanghai) Co., Ltd. TA-MB-04-008O P age 2 of 13 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. TABLE OF CONTENTS 1. Test Laboratory .............................................................................................................................. 3 1.1. Notes of the Test Report ................................................................................................... 3 1.2. Test facility ........................................................................................................................ 3 1.3. Testing Location ................................................................................................................ 3 1.4. Laboratory Environment .................................................................................................... 4 2. General Description of Equipment under Test ............................................................................... 5 2.1. Applicant and Manufacturer Information ............................................................................ 5 2.2. General information ........................................................................................................... 5 2.3. Test Date ........................................................................................................................... 5 2.4. Receiving Date .................................................................................................................. 5 2.5. Applied Standards ............................................................................................................. 6 3. Test Conditions .............................................................................................................................. 7 3.1. Test Configuration ............................................................................................................. 7 3.2. Test Measurement ............................................................................................................. 7 4. Test Results ................................................................................................................................... 8 4.1. Gain and Efficiency ............................................................................................................ 8 5. Equipment List ............................................................................................................................... 9 ANNEX A 3-D Pattern Plots ................................................................................................................... 10 ANNEX B：The EUT Appearance and Test Configuration ...................................................................... 12 B.1 EUT Appearance ................................................................................................................... 12 B.2 Test Configuration ................................................................................................................. 13 OTA Test Report Report No: Y2102A0260-T3 TA Technology (Shanghai) Co., Ltd. TA-MB-04-008O P age 3 of 13 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. 1. Test Laboratory 1.1. Notes of the Test Report This report shall not be reproduced in full or partial, without the written approval of TA technology (shanghai) co., Ltd. The results documented in this report apply only to the tested sample, under the conditions and modes of operation as described herein .Measurement Uncertainties were not taken into account and are published for informational purposes only. This report is written to support regulatory compliance of the applicable standards stated above. 1.2. Test facility A2LA (Certificate Number: 3857.01) TA Technology (Shanghai) Co., Ltd. has been listed by American Association for Laboratory Accreditation to perform measurement. 1.3. Testing Location Company: TA Technology (Shanghai) Co., Ltd. Address: No.145, Jintang Rd, Tangzhen Industry Park, Pudong Shanghai, China City: Shanghai Post code: 201201 Country: P. R. China Contact: Xu Kai Telephone: +86-021-50791141/2/3 Fax: +86-021-50791141/2/3-8000 Website: http://www.ta-shanghai.com E-mail: [email protected] OTA Test Report Report No: Y2102A0260-T3 TA Technology (Shanghai) Co., Ltd. TA-MB-04-008O P age 4 of 13 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. 1.4. Laboratory Environment Temperature Min. =19°C，Max. = 25°C Relative humidity Min. =40%，Max. =72% Shield effect 0.7-6GHz > 100dB Ground resistance <0.5 OTA Test Report Report No: Y2102A0260-T3 TA Technology (Shanghai) Co., Ltd. TA-MB-04-008O P age 5 of 13 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. 2. General Description of Equipment under Test 2.1. Applicant and Manufacturer Information Applicant Name Espressif System (Shanghai) Co.,Ltd Applicant address Suite 204 Block 2, 690 Bibo Road, Zhang Jiang Hi-Tech Park, Shanghai, China Manufacturer Name Espressif System (Shanghai) Co.,Ltd Manufacturer address Suite 204 Block 2, 690 Bibo Road, Zhang Jiang Hi-Tech Park, Shanghai, China 2.2. …

Text truncated - open the document above for the full version.

ReportNo.:1811C60019316201-01 Page 1 of 33 AppendixTestData ReportNo.:1811C60019316201-01TestSampleNo.:1-2-2 StartTestDate:2026-1-26FinishTestDate:2026-1-30 TestEngineer:Auditor: Temperature:23.1°CRelativeHumidity:52% Pressure:101kPa AppendixA:6dBBandwidth TestResult Test Mode AntennaFrequency[MHz] 6dBBW [MHz] FL[MHz]FH[MHz]Limit[MHz]Verdict BLE_1MAnt124020.6602401.6762402.3360.5PASS BLE_1MAnt124400.7082439.6442440.3520.5PASS BLE_1MAnt124800.6682479.6722480.3400.5PASS BLE_2MAnt124021.2162401.3602402.5760.5PASS BLE_2MAnt124401.1962439.3482440.5440.5PASS BLE_2MAnt124801.1402479.4482480.5880.5PASS ReportNo.:1811C60019316201-01 Page 2 of 33 TestGraphs BLE_1M-Ant1-2402-PASS BLE_1M-Ant1-2440-PASS ReportNo.:1811C60019316201-01 Page 3 of 33 BLE_1M-Ant1-2480-PASS BLE_2M-Ant1-2402-PASS ReportNo.:1811C60019316201-01 Page 4 of 33 BLE_2M-Ant1-2440-PASS BLE_2M-Ant1-2480-PASS ReportNo.:1811C60019316201-01 Page 5 of 33 AppendixB:99%OccupiedBandwidth TestResult Test Mode AntennaFrequency[MHz] OCB [MHz] FL[MHz]FH[MHz]Limit[MHz]Verdict BLE_1MAnt124021.03192401.48852402.5204------ BLE_1MAnt124401.03482439.48782440.5226------ BLE_1MAnt124801.03412479.48862480.5227------ BLE_2MAnt124022.08692400.97302403.0599------ BLE_2MAnt124402.08932438.97442441.0637------ BLE_2MAnt124802.08952478.97292481.0624------ ReportNo.:1811C60019316201-01 Page 6 of 33 TestGraphs BLE_1M-Ant1-2402 BLE_1M-Ant1-2440 ReportNo.:1811C60019316201-01 Page 7 of 33 BLE_1M-Ant1-2480 BLE_2M-Ant1-2402 ReportNo.:1811C60019316201-01 Page 8 of 33 BLE_2M-Ant1-2440 BLE_2M-Ant1-2480 ReportNo.:1811C60019316201-01 Page 9 of 33 AppendixC:Maximumconductedoutputpower TestResultPeak Test Mode Antenna Frequency [MHz] Conducted Peak Power[dBm] Conducted Limit[dBm] Verdict BLE_1MAnt12402-3.22≤30PASS BLE_1MAnt12440-3.09≤30PASS BLE_1MAnt12480-3.16≤30PASS BLE_2MAnt12402-3.64≤30PASS BLE_2MAnt12440-3.55≤30PASS BLE_2MAnt12480-3.67≤30PASS TestGraphsPeak BLE_1M-Ant1-2402-PASS ReportNo.:1811C60019316201-01 Page 10 of 33 BLE_1M-Ant1-2440-PASS BLE_1M-Ant1-2480-PASS ReportNo.:1811C60019316201-01 Page 11 of 33 BLE_2M-Ant1-2402-PASS BLE_2M-Ant1-2440-PASS ReportNo.:1811C60019316201-01 Page 12 of 33 BLE_2M-Ant1-2480-PASS ReportNo.:1811C60019316201-01 Page 13 of 33 AppendixD:Maximumpowerspectraldensity TestResult TestModeAntennaFrequency[MHz]Result[dBm/30kHz]Limit[dBm/3kHz]Verdict BLE_1MAnt12402-19.51≤8.00PASS BLE_1MAnt12440-19.44≤8.00PASS BLE_1MAnt12480-19.40≤8.00PASS BLE_2MAnt12402-21.91≤8.00PASS BLE_2MAnt12440-22.30≤8.00PASS BLE_2MAnt12480-22.37≤8.00PASS ReportNo.:1811C60019316201-01 Page 14 of 33 TestGraphs BLE_1M-Ant1-2402-PASS BLE_1M-Ant1-2440-PASS ReportNo.:1811C60019316201-01 Page 15 of 33 BLE_1M-Ant1-2480-PASS BLE_2M-Ant1-2402-PASS ReportNo.:1811C60019316201-01 Page 16 of 33 BLE_2M-Ant1-2440-PAS…

Text truncated - open the document above for the full version.