2BVAY-M6GNSS Receiver

M6GNSSReceiverUser Guide M6 GNSS Receiver User Guide FCC Warning This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any inte rference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interferenceto radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. M6GNSSReceiverUserGuide 1Introduction.................................................................................................................5 1.1Aboutthereceiver.............................................................................................5 1.2Receiverfeatures................................................................................................5 1.3M6partslist.......................................................................................................5 1.3.1BasicSupplykit.......................................................................................5 2Settingupthereceiver..................................................................................................7 2.1Environmentalrequirements..............................................................................7 2.2Frontpanel.........................................................................................................7 2.3Lowerhousing...................................................................................................7 2.4Powersupply.....................................................................................................7 2.4.1Internalbatteries......................................................................................7 2.4.2ExternalPowerSupply............................................................................8 2.4.3ChargeBatteryviaM6.............................................................................8 2.5Pole-mountedsetup............................................................................................9 3GeneralOperation......................................................................................................10 3.1Buttonfunctions...............................................................................................10 3.2LEDbehavior...................................................................................................10 4Staticsurvey...............................................................................................................11 4.1StaticDataCollection.......................................................................................12 4.2StaticDataDownload......................................................................................12 4.3RINEXConvert...............................................................................................13 5Real-TimeKinematicSurvey(RTK)..........................................................................15 5.1InstallationofMfield........................................................................................15 5.2WizardfunctioninMfield................................................................................15 5.3StartaNewProject..........................................................................................17 5.4Bluetoothconnection.......................................................................................19 5.5InternalRadioMode........................................................................................20 5.5.1StartBaseStationbyMfield...................................................................21 5.5.2StartRoverStationbyMfield.................................................................23 5.6PDACORSMode............................................................................................23 6BasicSurveyFunctions..............................................................................................25 6.1Toposurvey.....................................................................................................25 6.1.1Surveysettings.......................................................................................27 6.1.2Tiltsurvey..............................................................................................28 6.2Autosurvey/Areasurvey..................................................................................28 6.3Stakepoints/lines.............................................................................................29 6.4PPK....................................................................................................…

Text truncated - open the document above for the full version.

Covered Equipment Attestation Letter For Certification Service in the USA Federal Communications Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 To whom it may concern Pursuant to Section 2.911(d)(5)(i)-(ii) of the Commission’s Rules (47 C.F.R.) we attest as follows for the product listed below: FCC ID Model name 2BVAY-M6 M6 We, Applicant Company Name: MaxNav Technology Ltd. Address: 3/F, Building 1, No. 400 Fangchun Road, Shanghai Pilot Free Trade Zone 201800, China Phone: +86-21-39907000 certify that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. This includes the cybersecurity and anti-virus software produced or provided by Kaspersky Lab, Inc. or any of ist successors and assignees. We certify that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. If you have any questions, please feel free to contact us at the address shown below. Sincerely, 2026-05-15 Signature Date Name / Title: Lei / Product Certification Engineer Company: MaxNav Technology Ltd. Address: 3/F, Building 1, No. 400 Fangchun Road, Shanghai Pilot Free Trade Zone 201800, China Phone: +86-21-39907000 Fax: +86-21-54309582 E-Mail: [email protected]

Due Diligence Letter For Certification Service in the USA Federal Communications Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 To whom it may concern FCC ID Model name 2BVAY-M6 M6 Pursuant to KDB 986446 D01 Covered Equipment Guidance the evaluation of the product above shows compliance for the following reasons: Compliance Evaluation process Results Inherent compliance The chipset(s) used is not capable of running the cybersecurity and/or anti-virus software Compliance The memory used does not allow the running the cybersecurity and/or anti-virus software Compliance The storage capacity does not allow the running the cybersecurity and/or anti-virus software Compliance The operating system used is not capable of running the cybersecurity and/or anti-virus software Compliance No inherent compliance Based on software bill of material Based on scan for running software on the device Based on filesystem scan for cybersecurity and/or anti-virus software The equipment for which authorization is sought complies with the rules and fulfils the requirements as detailed in the above mentioned KDB. Evaluation performed by Company Name: Shenzhen LCS Compliance Testing Laboratory Ltd. Contact Name: Martion Lee Address: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Phone: +86-755-82591330 Email: [email protected] Signature: Date: 2026-05-15

Confidentiality Request Letter For Certification Service in the USA Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 To whom it may concern Pursuant to Paragraphs §0.457 and 0.459 of the Commission’s Rules (47 C.F.R.) and Section §552(b)(4) of the Freedom of Information Act, we request confidentiality for the documentation of the following products: FCC ID Model name 2BVAY-M6 M6 For the products listed above, we request permanent confidentiality for all applicable exhibits as there are: • the Operational Description • the Block Diagram • the Schematics • the Part List • the Tune up Information The above listed exhibits contain trade secrets and proprietary information that could be of benefit to our competitors. If you have any questions, please feel free to contact us at the address shown below. Sincerely, 2026-05-15 Signature Date Name / Title: Lei / Product Certification Engineer Company: MaxNav Technology Ltd. Address: 3/F, Building 1, No. 400 Fangchun Road, Shanghai Pilot Free Trade Zone 201800, China Phone: +86-21-39907000 Fax: +86-21-54309582 E-Mail: [email protected]

MaxNav Technology Ltd. 3/F, Building 1, No. 400 Fangchun Road, Shanghai Pilot Free Trade Zone 201800, China Date: May 15, 2026 FCC ID: 2BVAY-M6 Model Number: M6 To: Federal Communication Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21048 Subject: Extend Frequencies Justification Original Application FCC ID: 2BVAY-M6 To Whom It May Concern, This GNSS Receiver was designed to operate in the frequency bands 410 – 470 MHz; To aid equipment authorization in other countries that accepts the United States FCC Grant for Certification, MaxNav Technology Ltd. is requesting that the FCC list the frequencies 410 – 470 MHz under FCC rules Part 90 and the Grant note code “EF”. For FCC’s Rule Part 90 applications this radio is used in systems by Federal and Public Safety agencies including Police, Fire, and Emergency Medical Services. Etc. as indicated in the table below. Equipment programming is the responsibility of Authorized Service Personal. Also, the radio complies with 47 CFR Part 90.203 (e), in that the operator cannot directly program the transmit frequencies using the normally accessible external controls. Per the FCC’s KDB 634817 guidance, as an alternative to listing the exact frequencies, we acknowledge that it’s a violation of the FCC Rules if this device operates on unauthorized frequencies. Frequency Rang [MHz] Part 22 Part 74 Part 80 Part 90 Federal 410 – 450 X 450 – 454 X 454 – 456 X 456 – 460 X X X 460 – 462.5375 X X 462.5375 – 462.7375* X 462.7375 – 467.5375 X X 467.5375 – 467.7375 X 467.7375 – 470 X X Should you have any questions or comments regarding this matter, please have my best attention. MaxNav Technology Ltd. 3/F, Building 1, No. 400 Fangchun Road, Shanghai Pilot Free Trade Zone 201800, China Sincerely, (Signed) Name/Title: Lei Hu / Product Certification Engineer Company: MaxNav Technology Ltd. Address: 3/F, Building 1, No. 400 Fangchun Road, Shanghai Pilot Free Trade Zone 201800, China Tel: +86-21-39907000 Fax: +86-21-54309582 E-Mail: [email protected]

MaxNav Technology Ltd. 3/F, Building 1, No. 400 Fangchun Road, Shanghai Pilot Free Trade Zone 201800, China Date: May 15, 2026 FCC ID: 2BVAY-M6 Model Number: GNSS Receiver To: Federal Communication Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21048 To Whom It May Concern, We, MaxNav Technology Ltd. hereby declare that our product (GNSS Receiver) Model Number: M6 will disable cellular and WLAN function by software although hardware support due to marketing purposes. End-user cannot use cellular and WLAN function in United States. GNSS Receiver will need a new certification when open cellular and (or) WLAN function by software if marketing requirement. Should you have any questions or comments regarding this matter, please have my best attention. Sincerely, (Signed) Name/Title: Lei Hu / Product Certification Engineer Company: MaxNav Technology Ltd. Address: 3/F, Building 1, No. 400 Fangchun Road, Shanghai Pilot Free Trade Zone 201800, China Tel: +86-21-39907000 Fax: +86-21-54309582 E-Mail: [email protected]

MaxNav Technology Ltd. 3/F, Building 1, No. 400 Fangchun Road, Shanghai Pilot Free Trade Zone 201800, China Date: May 15, 2026 FCC ID: 2BVAY-M6 Model Number: M6 To: Federal Communication Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21048 Subject: Extend Frequencies Justification Original Application FCC ID: 2BC62S6PLUS To Whom It May Concern, We, MaxNav Technology Ltd. declares that the GNSS Receiver meets 47 CFR Section 90.203(j)(4) and 90.203(j)(5) spectrum efficiency requirement; The GNSS Receiver is support both 12.5 KHz for GMSK (Digital modulation; Emission Designator: 7K60G1D for data mode), also the GNSS Receiver designed in accordance with ETSI TS 102 361-1 requirement, will at least support 9600 bits per second in a 12.5 KHz channel bandwidth in a 12.5 KHz channel bandwidth and 19200 bits per second in a 25 KHz channel bandwidth, GMSK will use 2 times slots in one 12.5 KHz bandwidth and 4 time slots in one 25 KHz bandwidth accordance to ETSI TS 102 361-1, which equal with 9600/2 = 4800 and 19200/4 = 4800 bits per second in one 6.25 KHz channel bandwidth; We, MaxNav Technology Ltd. declares that the GNSS Receiver capable of operating on the nationwide public safety interoperability calling channel (453.2125 MHz), meets 47CFR Section 90.203(j)(1) requirement; Should you have any questions or comments regarding this matter, please have my best attention. Sincerely, (Signed) Name/Title: Lei Hu / Product Certification Engineer Company: MaxNav Technology Ltd. Address: 3/F, Building 1, No. 400 Fangchun Road, Shanghai Pilot Free Trade Zone 201800, China Tel: +86-21-39907000 Fax: +86-21-54309582 E-Mail: [email protected]

Page 1 of 6 FCC ID: 2BVAY-M6 Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity External Photos of the EUT Fig. 1 Fig. 2 PMR ANTENNA Page 2 of 6 FCC ID: 2BVAY-M6 Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Fig. 3 Fig. 4 Page 3 of 6 FCC ID: 2BVAY-M6 Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Fig. 5 Fig. 6 Page 4 of 6 FCC ID: 2BVAY-M6 Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Fig. 7 Fig. 8 Page 5 of 6 FCC ID: 2BVAY-M6 Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Fig. 9 Fig. 10 Page 6 of 6 FCC ID: 2BVAY-M6 Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Fig. 11

Page 1 of 1 FCC ID: 2BVAY-M6 Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity LABEL AND LOCATION (Size: L3.0cm x W2.0cm) GNSS Receiver Model: M6 FCC ID: 2BVAY-M6 Label Location

Page 1 of 11 FCC ID: 2BVAY-M6 Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Internal Photos of the EUT Fig. 1 Fig. 2 NFC TX ANTENNA BT ANTENNA Page 2 of 11 FCC ID: 2BVAY-M6 Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Fig. 3 Fig. 4 Page 3 of 11 FCC ID: 2BVAY-M6 Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Fig. 5 Fig. 6 Page 4 of 11 FCC ID: 2BVAY-M6 Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Fig. 7 Fig. 8 Page 5 of 11 FCC ID: 2BVAY-M6 Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Fig. 9 Fig. 10 Page 6 of 11 FCC ID: 2BVAY-M6 Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Fig. 11 Fig. 12 Page 7 of 11 FCC ID: 2BVAY-M6 Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Fig. 13 Fig. 14 Page 8 of 11 FCC ID: 2BVAY-M6 Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Fig. 15 Fig. 16 Page 9 of 11 FCC ID: 2BVAY-M6 Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Fig. 17 Fig. 18 Page 10 of 11 FCC ID: 2BVAY-M6 Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Fig. 19 Fig. 20 Page 11 of 11 FCC ID: 2BVAY-M6 Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Fig. 21

Page 1 of 10 FCC ID: 2BVAY-M6 Report No.: LCSA03166061EE Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity RF Exposure Evaluation FOR MaxNav Technology Ltd. GNSS Receiver Test Model: M6 Prepared for : MaxNav Technology Ltd. Address : 3/F, Building 1, No. 400 Fangchun Road,Shanghai Pilot Free Trade Zone,201800,China Prepared by : Shenzhen LCS Compliance Testing Laboratory Ltd. Address : 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel : (+86)755-82591330 Fax : (+86)755-82591332 Web : www.LCS-cert.com Mail : [email protected] Date of receipt of test sample : March 30, 2026 Number of tested samples : 2 Sample No. ： A260325046-1, A260325046-2 Serial number : Prototype Date of Test : March 30, 2026 ~ May 15, 2026 Date of Report : May 15, 2026 Page 2 of 10 FCC ID: 2BVAY-M6 Report No.: LCSA03166061EE Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity RF Exposure Evaluation Report Reference No. ................. : LCSA03166061EE Date of Issue................................... : May 15, 2026 Testing Laboratory Name ............ : Shenzhen LCS Compliance Testing Laboratory Ltd. Address ........................................... : 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Testing Location/ Procedure .......... : Full application of Harmonised standards ■ Partial application of Harmonised standards □ Other standard testing method □ Applicant’s Name ......................... : MaxNav Technology Ltd. Address ........................................... : 3/F, Building 1, No. 400 Fangchun Road,Shanghai Pilot Free Trade Zone,201800,China Test Specification Standard ......................................... : FCC KDB publication 447498 D01 General RF Exposure Guidance v06 FCC CFR 47 part1 1.1310 FCC CFR 47 part2 2.1091 Test Report Form No. ..................... : TRF-4-E-214 A/0 TRF Originator ................................ : Shenzhen LCS Compliance Testing Laboratory Ltd. Master TRF ..................................... : Dated 2011-03 Shenzhen LCS Compliance Testing Laboratory Ltd. All rights reserved. This publication may be reproduced in whole or in part for non-commercial purposes as long as the Shenzhen LCS Compliance Testing Laboratory Ltd. is acknowledged as copyright owner and source of the material. Shenzhen LCS Compliance Testing Laboratory Ltd. takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. Test Item Description. .................. : GNSS Receiver Trade Mark ..................................... : Test Model ...................................... : M6 Ratings ............................................ : Please Refer to Page 6 Result ........................................... : Pass Compiled by: Supervised by: Approved by: Jack Liu/ Administrator Kevin Huang/ RF Manager Gavin Liang/ Manager Page 3 of 10 FCC ID: 2BVAY-M6 Report No.: LCSA03166061EE Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity RF Exposure Evaluation Test Result Pass The test report merely corresponds to the test sample. It is not permitted to copy extracts of these test result without the written permission of the test laboratory. Test Report No. : LCSA03166061ED May 15, 2026 Date of issue Test Model.............................. : M6 EUT......................................... : GNSS Receiver Applicant............................... : MaxNav Technology Ltd. Address................................... : 3/F, Building 1, No. 400 Fangchun Road,Shanghai Pilot Free Trade Zone,201800,China Telephone............................... : / Fax.......................................... : / Manufacturer......................... : MaxNav Technology Ltd. Address................................... : 3/F, Building 1, No. 400 Fangchun Road,Shanghai Pilot Free Trade Zone,201800,China Telephone............................... : / Fax.......................................... : / Factory................................... : MaxNav Technology Ltd. Address................................... : 3/F, Building 1, No. 400 Fangchun Road,Shanghai Pilot Free Trade Zone,201800,China Telephone............................... : / Fax.......................................... : / Page 4 of 10 FCC ID: 2BVAY-M6 Report No.: LCSA03166061EE Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Revision History Report Version Issue Date Revision Content Revised By 000 May 15, 2026 Initial Issue --- Page 5 of 10 FCC ID: 2BVAY-M6 Report No.: LCSA03166061EE Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity TABLE OF CONTENTS Description Page 1. Product Information ............................................…

Text truncated - open the document above for the full version.

Page 1 of 38 FCC ID: 2BVAY-M6 Report No.: LCSA03166061EC Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity FCC TEST REPORT For MaxNav Technology Ltd. GNSS Receiver Test Model: M6 Prepared for : MaxNav Technology Ltd. Address : 3/F, Building 1, No. 400 Fangchun Road,Shanghai Pilot Free Trade Zone,201800,China Prepared by : Shenzhen LCS Compliance Testing Laboratory Ltd. Address : 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel : (+86)755-82591330 Fax : (+86)755-82591332 Web : www.LCS-cert.com Mail : [email protected] Date of receipt of test sample : March 30, 2026 Number of tested samples : 2 Sample No. ： A260325046-1, A260325046-2 Serial number : Prototype Date of Test : March 30, 2026 ~ May 15, 2026 Date of Report : May 15, 2026 Page 2 of 38 FCC ID: 2BVAY-M6 Report No.: LCSA03166061EC Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity FCC TEST REPORT FCC Part 90 Report Reference No. ................. : LCSA03166061EC Date of Issue .................................. : May 15, 2026 Testing Laboratory Name ............ : Shenzhen LCS Compliance Testing Laboratory Ltd. Address .......................................... : 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Testing Location/ Procedure .......... : Full application of Harmonised standards ■ Partial application of Harmonised standards □ Other standard testing method □ Applicant’s Name ......................... : MaxNav Technology Ltd. Address .......................................... : 3/F, Building 1, No. 400 Fangchun Road,Shanghai Pilot Free Trade Zone,201800,China Test Specification Standard ......................................... : FCC CFR Title 47 Part 2, Part 90 Test Report Form No. ................... : LCSEMC-1.0 TRF Originator ................................ : Shenzhen LCS Compliance Testing Laboratory Ltd. Master TRF .................................... : Dated 2011-03 Shenzhen LCS Compliance Testing Laboratory Ltd. All rights reserved. This publication may be reproduced in whole or in part for non-commercial purposes as long as the Shenzhen LCS Compliance Testing Laboratory Ltd. is acknowledged as copyright owner and source of the material. Shenzhen LCS Compliance Testing Laboratory Ltd. takes no responsibility for and will not assume liability…

Text truncated - open the document above for the full version.