2BVBF-CU105Wireless Car Adapter

size:58*89mm and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:- Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. NOTE 2: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. RF Exposure Statement To maintain compliance with FCC'S RF Exposure guidelines, This equipment should be installed and operated with minimum 20cm between the radiator and your body. This device and its antenna(s) must not be co-located or operation in conjunction with any other antenna or transmitter. 折页 Wireless Car Adapter MAUNAL RoHS -2- -3- -4--5--6--7- Connect and pair Bluetooth Bluetooth connectedConnection is successful Pair Bluetooth Allow contacts and favorites SyncUse CarPlay -1- *Please read the product manual carefully before youuse the product, and keep it properly. Product Specifications: • Input : 5V/1A • Operati ng temperature : 28° - 34° • Supported temperature : -20°to 80° • Phone model : iPhone 8 or above, or Android Auto phones Function: Co nvert the original c ar's wir ed CarPla y to wireless CarPlay funct ion Original car's wired Android Auto to wireless Android Auto Note: Th e adapter defa ults to CarPla y mode Switching between the two-in-one mode: 1. T he adapter defaults to CarPla y mode. When you are in CarPlay mode, use an iPhone t o co nnect t o theadapter's Bluet ooth. If you need to use the Android Auto function, you nee d to turn off the Bluetooth and WiFi of the iPhone, and at the same time u se an Andr oid phone to connect t o the adapter's Bluet ooth. The adapter will automatically switch to the Android Auto mode. After the indicator l ight fashes, usethe Android phone toconnect tothe adapter's Bluetooth. 2. If you are currently in the Android Auto mode and need to use the CarPlay function, yo u need to turn of f the Bluet ooth and WiFi of the Andr oid phone, and at the same time use an iPhone to connect t o the adapter 's Bluet ooth. The adapter wi ll automatically switch to the CarPlay mode. After the indicator light fashes, use the iPhone to connect to the adapter's Bluet ooth. Wireless CarPlay usage method: 1. P lug this produc t into the original car's usb port and wait for the display of the car UI interface. After the UI in terface comes out, please use the mobile realiz e the functi on o f the produc t under the prompt an d guidance of thephone to connect to the Bluetooth name on the inter face, and at the same time mobile phone. 12 . If the car fails to automatically connect again after starting, please delete theBluet ooth and WiFi of this device from the phone's Bluet ooth list and WiFi list, and then search for and connect to the Bluetooth of this device again. 1. Plug this adapter into the original car's USB port. 2. Wait for 3-10 seconds. 3. Find and pair the adapter's Bluetooth in the Bluet ooth list on the Android phone.The Bluet ooth na me is carplay- box -xxxx 4. Pairing is successful, once pairing is successful, the Android Auto continuat ion page wi ll appear on the phone, and the indicator light will turn blue. 5. Please click the Android Auto icon on the original car to enter the wireless Android Auto func tion. 4. Before connecting wi th a different mobil e phone, plea se turn off the Bluet ooth and WiFi of the mobile phone that has previous ly connected to the adapter, or ena ble airplane mode. 5. If you need to turn off the Wireless Android Auto funct ion, you need to turn off the Bluet ooth and WiFi of the adapter on the mobile phone, or unplug the adapter. 6. After the Wireless Android Auto is successfully co nnected, the Bluetooth of the Android phone will be disconnected from our adapter. There i s no need to enter a password for the device WiFi, and the backup p assword is12345678. 7. If you have inserted the adapter and successfully connected to the adapter's Bluetooth, but the Android Auto cont inuati on interface has n ot appeared on the car head unit or the mobile phone, please seek help in "I f you can't connect again, please try the f ollowing" in the troubleshootin g. If you still cannot connect after this method, it mean s that this device does not support your car model. 8. The content (including fonts, music, audio, maps, lyr ics, touch, calls, etc.) generated by this Wireless Androi d Auto function ha s nothing to do with this product. 9. Due to regional differences, mobile phone models, mobile phon e brands, and enviro nmental temperature differences, using the Wireless Android Auto 9. Due to regional differences, mobile phone models, mobile phone brands, funct ion may cause the phone to cons ume power too quickly or the phone to heat up significantly, resultin g in disconnection or degraded experience. 10 . If there is a connection problem, restart the car or restore the car to factory Settings. 11. When you start the car again, the Wireless Android Auto fu n…

Text truncated - open the document above for the full version.

Dongguan Yichuang Intelligent Technology Co., Ltd. Covered Equipment Certification Attestation Letter 3/20/2026 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA ATTN.: Reviewing Engineer FCC ID: 2BVBF-CU105 Dongguan Yichuang Intelligent Technology Co., Ltd. (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Note: If the equipment for which the applicant seeks authorization is produced by any of the entities identified on the current Covered List, the applicant should include an explanation on why the equipment is not “covered” equipment. Dongguan Yichuang Intelligent Technology Co., Ltd. (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing “covered” equipment. Dongguan Yichuang Intelligent Technology Co., Ltd. (“the applicant”) certifies that the equipment for which authorization is sought does not include cybersecurity or anti-virus software produced or provided by Kaspersky Lab, Inc. or any of its successors and assignees, including equipment with integrated Kaspersky Lab, Inc. (or any of its successors and assignees) cybersecurity or anti-virus software pursuant to DA-24-886 and KDB 986446 D01 Covered Equipment Guidance section B(2a). Signed: Printed name: Ding Zhang Title: Manager Company Name: Dongguan Yichuang Intelligent Technology Co., Ltd. Date: 03/20/2026

Dongguan Yichuang Intelligent Technology Co., Ltd. U.S. Agent Letter of Attestation To: Federal Communications Commission 7435 Oakland Mills Road, Columbia, MD 21046, USA Date: March 20, 2026 Ref: Attestation Statement – Part 2.911(d)(7) filing FCC ID: 2BVBF-CU105 Dongguan Yichuang Intelligent Technology Co., Ltd. (“the applicant”) certifies that, as of the date of the filing of the application, CLF Import and Export Limited (“the agent”) is our designated U.S. agent for service of process for the above reference FCC ID. The applicant accepts to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. The applicant further acknowledges it is our responsibility to inform the FCC whenever the agent information changes. CLF Import and Export Limited ("the agent) understand it is the agent's obligation to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and email address. Designated U.S. Agent Company Name: CLF Import and Export Limited FRN: 0033489683 Address: 1312 17th Street #692, Denver, CO 80202, United States Signature: Contact Person: David Chen Tel: +1 949 254 2565 Email: [email protected] Applicant Company Name: Dongguan Yichuang Intelligent Technology Co., Ltd. FRN: 0038182150 Address: Room 321, Building 5, Vanke Center, No. 200 Guancheng Section, Guancheng Subdistrict, Dongguan, Guangdong, China Signature: Contact Person: Ding Zhang Tel: +86-1392922 8108 Email: [email protected]

DATE: March 20, 2026 Federal Communications Commission Authorization & Evaluation Division 7345 Oakland Mills Road Columbia, Maryland 21046 Authority to Act as Agent On our behalf, I appoint Shenzhen CCUT Quality Technology Co., Ltd. (1F, Building 35, Changxing Technology Indstrl Park Changzhen Community, Yutang Street,Shenzhen,China) to act as our agent in the preparation of this application for equipment certification. I certify that submitted documents properly describe the device or system for which equipment certification is sought. I also certify that each unit manufactured, imported or marketed, as defined in the Federal Communications Commission’s regulations will have affixed to it a label identical to that submitted for approval with this application. For instances where our authorized agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for certification, still resides with Dongguan Yichuang Intelligent Technology Co., Ltd. (Room 321, Building 5, Vanke Center, No. 200 Guancheng Section, Guancheng Subdistrict, Dongguan, Guangdong, China <Signature> Name: Ding Zhang Title: Manager Company: Dongguan Yichuang Intelligent Technology Co., Ltd.

Date: March 20, 2026 Federal Communications Commission Authorization & Evaluation Division 7345 Oakland Mills Road Columbia, Maryland 21046 RE: LETTER OF AGENT AUTHORIZATION To Whom It May Concern: We, the undersigned, hereby authorize Compliance Testing, LLC to act on our behalf in all matters relating to application for equipment authorization, including the signing of all documents relating to these matters. We also hereby certify that no party to the application authorized hereunder is subject to the denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C.853(a). Sincerely, <Signature> Name: Ding Zhang Title: Manager Company: Dongguan Yichuang Intelligent Technology Co., Ltd.

DATE: March 20, 2026 Equipment Autorisation Division Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: 2BVBF-CU105 Product Name: Wireless Car Adapter Request for Confidentiality Pursuant to Sections 0.457 and 0.459 of the commission’s rules, we hereby request that the following documents be held confidential: (List here the documents for which you are seeking confidentiality – for example ...)  Schematics  Block diagram  Operation description  SOFTWARE SECURITY DESCRIPTION These materials contain trade secrets and proprietary information and are not customarily released to the public. The public disclosure of this information might be harmful to the company and provide unjustified benefits to our competitors. <Signature> Name: Ding Zhang Title: Manager Company: Dongguan Yichuang Intelligent Technology Co., Ltd.

Dongguan Yichuang Intelligent Technology Co., Ltd. Model Difference Statement DATE: March 20, 2026 FCC ID: 2BVBF-CU105 Dear Sir/Madam, Added models CM101, CM102, CM103, CM104, CM105, CM106, CM107, CM108, CU101, CU102, CU103, CU104, CU106, CU107, CU108, CU109, CT101, CT102, CT103, CT104, CT105, CT106, CT107, CT108, CT109, CT110, CT111, CT112, CT115 basis of the original product CU105. The appearance, shape, color and model name of the listed series models are different from those of the main model, but the circuit and the electronic construction are the same, declared by the manufacturer.. Sincerely, Name: Ding Zhang Title: Manager Company name: Dongguan Yichuang Intelligent Technology Co., Ltd. Address: Room 321, Building 5, Vanke Center, No. 200 Guancheng Section, Guancheng Subdistrict, Dongguan, Guangdong, China

Report No: SSP26030196-1E FCC ID: 2BVBF-CU105 Annex of Test Report Annex A. EUT External Photos Model: CU105 EUT View 1 EUT View 2 Report No: SSP26030196-1E FCC ID: 2BVBF-CU105 Annex of Test Report EUT View 3 EUT View 4 Report No: SSP26030196-1E FCC ID: 2BVBF-CU105 Annex of Test Report EUT View 5 EUT View 6 Report No: SSP26030196-1E FCC ID: 2BVBF-CU105 Annex of Test Report EUT View 7 EUT View 8

Report No: SSP26030196-1E FCC ID: 2BVBF-CU105 Annex of Test Report Annex D. Label and Inf ormation FCC Label Sample FCC Labe Size: 2cm x 1cm FCC Label Specifications Text is Black in color and is justified. Labels are printed in indelible ink on permanent adhesive backing or silk-screened onto the EUT or shall be affixed at a conspicuous location on the EUT. Where the EUT is constructed in two or more sections connected by wires and marketed together, the above statement is required to be affixed only to the main control unit. When the EUT is so small or for such use that it is not practicable to place the statement on it, the above information shall be placed in a prominent location in the instruction manual or pamphlet supplied to the user or, alternatively, shall be placed on the container in which the device is marketed. FCC Label Location Label Location

Report No: SSP26030196-1E FCC ID: 2BVBF-CU105 Annex of Test Report Annex B. EUT Internal Photos Model: CU105 EUT Internal View 1 EUT Internal View 2 Report No: SSP26030196-1E FCC ID: 2BVBF-CU105 Annex of Test Report EUT Internal View 3 EUT Internal View 4 PCB ANT

FCC ID: 2BVBF-CU105 RF Exposure Evaluation Limits The criteria listed in the following table shall be used to evaluate the environment impact of human exposure to radio frequency (RF) radiation as specified in 1.1307(b) Limits for Maximum Permissible Exposure (MPE) Frequency range (MHz) Electric field strength (V/m) Magnetic field strength (A/m) Power density (mW/cm2) Averaging time (minutes) (A) Limits for Occupational/Controlled Exposures 0.3–3.0 614 1.63 *(100) 6 3.0–30 1842/f 4.89/f *(900/f2) 6 30–300 61.4 0.163 1.0 6 300–1500 f/300 6 1500–100,000 5 6 (B) Limits for General Population/Uncontrolled Exposure 0.3–1.34 614 1.63 *(100) 30 1.34–30 824/f 2.19/f *(180/f2) 30 30–300 27.5 0.073 0.2 30 300–1500 f/1500 30 1500–100,000 1.0 30 f = frequency in MHz Friis transmission formula: Pd = (Pout*G)/(4*pi*r2) Where Pd = power density in mW/cm2, Pout = output power to antenna in mW; G = gain of antenna in linear scale, Pi = 3.1416; R = distance between observation point and center of the radiator in cm Pd id the limit of MPE, 1 mW/cm2. If we know the maximum gain of the antenna and the total power input to the antenna, through the calculation, we will know the distance r where the MPE limit is reached. Test Procedure Software provided by client enabled the EUT to transmit and receive data at lowest, middle and highest channel individually. Test Result of RF Exposure Evaluation BLE Mode Output power to antenna (dBm) Output power to antenna (mW) Power Density at R=20cm (mW/cm 2 ) Limit (mW/cm 2 ) Result BLE_1Mbps 0.72 1.18 0.0003 1.0 PASS 5.2G Wi-Fi Mode Output power to antenna (dBm) Output power to antenna (mW) Power Density at R=20cm (mW/cm 2 ) Limit (mW/cm 2 ) Result 802.11a 6.25 4.22 0.0014 1.0 PASS Remark: 2.4G antenna gain=1.56dBi, 5G antenna gain=2.36dBi So a SAR test is not required

Report No: SSP26030196-1E FCC Test Report Page 1 of 33 FCC TEST REPORT FCC ID: 2BVBF-CU105 Report No. : SSP26030196-1E Applicant : Dongguan Yichuang Intelligent Technology Co., Ltd. Product Name : Wireless Car Adapter Model Name : CU105 Test Standard : FCC Part 15.247 Date of Issue : 2026-03-19 Shenzhen CCUT Quality Technology Co., Ltd. 1F, Building 35, Changxing Technology Industrial Park, Yutang Street, Guangming District, Shenzhen, Guangdong, China; (Tel.:+86-755-23406590 website: www.ccuttest.com) This test report is limited to the above client company and the product model only. It may not be duplicated without prior permitted by Shenzhen CCUT Quality Technology Co., Ltd. Report No: SSP26030196-1E FCC Test Report Page 2 of 33 Test Report Basic Information Applicant..................................: Dongguan Yichuang Intelligent Technology Co., Ltd. Address of Applicant...............: Room 321, Building 5, Vanke Center, No. 200 Guancheng Section, Guancheng Subdistrict, Dongguan, Guangdong, China Manufacturer..........................: Dongguan Yichuang Intelligent Technology Co., Ltd. Address of Manufacturer........: Room 321, Building 5, Vanke Center, No. 200 Guancheng Section, Guancheng Subdistrict, Dongguan, Guangdong, China Product Name.........................: Wireless Car Adapter Brand Name.............................: - Main Model..............................: CU105 Series Models..........................: CM101, CM102, CM103, CM104, CM105, CM106, CM107, CM108, CU101, CU102, CU103, CU104, CU106, CU107, CU108, CU109, CT101, CT102, CT103, CT104, CT105, CT106, CT107, CT108, CT109, CT110, CT111, CT112, CT115 Test Standard..........................: FCC Part 15 Subpart C KDB 558074 D01 15.247 Meas Guidance v05r02 ANSI C63.4-2014 ANSI C63.10-2020 Date of Test .............................: 2026-03-12 to 2026-03-18 Test Result...............................: PASS Tested By ................................: (Walker Wu) Reviewed By............................: (Lorzix Luo) Authorized Signatory............: (Lahm Peng) Note : This test report is limited to the above client company and the product model only. It may not be duplicated without prior permitted by Shenzhen CCUT Quality Technology Co., Ltd.. All test data presented in this test report is only applicable to presented test sample. Report No: SSP26030196-1E FCC Test Report Page 3 of 33 CONTENTS 1. General Information ....................................................................................................................................................5 1.1 Product Information .............................................................................................................................................5 1.2 Test Setup Information..........................................................................................................................................6 1.3 Compliance Standards ...........................................................................................................................................7 1.4 Test Facilities ........................................................................................................................................................7 1.5 List of Measurement Instruments ..........................................................................................................................8 1.6 Measurement Uncertainty .....................................................................................................................................9 2. Summary of Test Results ........................................................................................................................................... 10 3. Antenna Requirement ............................................................................................................................................... 11 3.1 Standard and Limit.............................................................................................................................................. 11 3.2 Test Result .......................................................................................................................................................... 11 4. Conducted Emissions ................................................................................................................................................ 12 4.1 Standard and Limit.............................................................................................................................................. 12 4.2 Test Procedure.................................................................................................................................................... 12 4.3 Test Data and Results .......................................................................................................................................... 13 5. Radiated Emissions ................................................................................................................................................... 16 5.1 Standard and Limit.............................................................................................................................................. 16 5.2 Test Procedure.................................................................................................................................................... 16 5.3 Test Data and Results .......................................................................................................................................... 18 6. Band-edge Emissions(Radiated) ............................................................................................................................... 22 6.1 Standard and Limit.............................................................................................................................................. 22 6.2 Test Procedure..........................................…

Text truncated - open the document above for the full version.

Page 1 of 4 1. General Inf ormation 1.1 Antenna Information Manufacturer: Dongguan Yichuang Intelligent Technology Co., Ltd. Address of Manufacturer: Room 321, Building 5, Vanke Center, No. 200 Guancheng Section, Guancheng Subdistrict, Dongguan, Guangdong, China Product Name: PCB Antenna Model Name: CU105 Frequency Range: 2400MHz – 2500MHz, 5150-5850MHz Type of Antenna: PCB Antenna Antenna Gain: 2.4G: 1.56dBi, 5G: 2.36dBi (Max.) Impedance: 50 ohm Antenna View: Length * Width (1.1cm * 0.8cm) Page 2 of 4 2. Antenna Specification inf ormation 2.1 Gain Frequency Peak Gain (dBi) Polarity 2400MHz 1.56 Horizontal 2400MHz 0.87 Vertical 2450MHz 0.75 Horizontal 2450MHz 0.36 Vertical 2500MHz 0.41 Horizontal 2500MHz 0.23 Vertical 5150MHz 2.36 Horizontal 5150MHz 1.65 Vertical 5500MHz 1.95 Horizontal 5500MHz 1.37 Vertical 5850MHz 1.59 Horizontal 5850MHz 0.83 Vertical Page 3 of 4 2.2 Radiation Pattern View Page 4 of 4

Report No: SSP26030196-1E FCC ID: 2BVBF-CU105 Annex of Test Report Annex C. Test Photos Conducted Emission Test View 1 Radiated Emission Test View Below 1GHz Report No: SSP26030196-1E FCC ID: 2BVBF-CU105 Annex of Test Report Radiated Emission Test View Above 1GHz