2BVBP-TMB-CONe-bike

FCC/ISED E-Label Information Model: TMB-CON A. Information to be displayed The information that will be displayed on the e-label and information that will remain in the user manual is show below Information On E-label In Manual FCC ID number / IC number Yes Yes SDoC logo Yes No 15.19 statement (“This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.”) No Yes Class A/B Digital Device user manual statements 1 No Yes SDoC declaration 1 No Yes Caution to the user that changes or modifications not expressly approved by the party responsible for compliance could void the user′s authority to operate the equipment 1 No Yes 1. If the e-label includes information typically included in the manual then the e- label shall clearly differentiate between information required to be on the device′s surface and information required to be in the manual-refer to 784748 D02 e labeling v02r01. 2. RSS GEN or other mandatory user information required to be on the surface of the device. Images of the e-label screen are provided below B. Access to the required information on the e-label 1. Users are able to access the information in no more than three steps in a device′s menu. The actual steps are: Step 1 - Home Screen (Tap on settings icon on the bottom right Step 2 - Settings Menu (Tap on 'Details' card) No special access codes or permissions are required to go through the above steps beyond entering a user-defined password to protect against unauthorized access to the device. 2. The information is stored on the device, no special accessories or supplemental plugins (e.g., a SIM/USIM card) are required to access the information. Yes. 3. Users are provided specific instructions on how to access the information. The information to the user is provided in the enclosed user manual. C. Labeling for Importation and Purchasing 1. Products utilizing e-labels are required to have a physical label on the product at the time of importation, marketing and sales. For devices imported in bulk and not packaged individually, a removable adhesive label or,for devices in protective bags, a label on the bags is acceptable for this purpose. Any removable label shall be of a type intended to survive normal shipping and handling and must only be removed by the customer after purchase. For devices imported already in individual packages ready for sale, the information may alternatively be provided on the package. It shall contain: a. The FCC ID and/or the SDoC logo (if applicable); and b. Any other information required by specific rule to be provided on the surface of the product 2. Unless such information is permitted to be included inthe User′s manual or other packaging inserts. The FCC ID and SDoC logo are present on the product package. HVIN (Model) is placed on the physical label of the product D. Other considerations 1. The above information must be programmed by the responsible party and the information must be secured in such a manner that third-parties cannot modify it. The e-label information is pre-programmed by the grantee. The user cannot modify the e-label information. 2. All the applicable regulatory information required on the packaging or user instructions must be provided according to the rules even if it is displayed electronically. Yes, it is provided.

Report No.: 2620024R-SAUSV01S-A Page: 1 of 42 Test report No.: 2620024R-SAUSV01S-A SAR Test Report Product Name e-bike Trademark ALSO Model and /or type reference TMB-CON Applicant ́s name / address ALSO INC 450 Lambert Ave, Palo Alto, CA 94306 USA Manufacturer ́s name ALSO INC FCC ID 2BVBP-TMB-CON Contains FCC ID 2ANPO00NRF9151 Applicable Standard IEEE 1528-2013 KDB 447498 D01 v06 KDB 865664 D01 v01r04 Test Result Max. SAR Measurement (1g) WLAN: 0.267 W/kg WWAN: 0.490 W/kg Verdict Summary IN COMPLIANCE Documented By (Supervisor / Jinn Chen) Te s t e d B y (Senior Engineer / Luke Cheng) Approved By (Assistant Manager / San Lin) Date of Receipt 2026/02/02 Date of Issue 2026/04/10 Report Version V1.0 Report No.: 2620024R-SAUSV01S-A Page: 2 of 42 INDEX Page 1. General Information ........................................................................................................ 5 1.1 EUT Description ................................................................................................. 5 1.2 Antenna List ....................................................................................................... 5 1.3 SAR Test Exclusion Calculation ......................................................................... 6 1.4 Test Environment ................................................................................................ 7 1.5 Measurement procedures................................................................................... 8 2. SAR Measurement System ............................................................................................. 9 2.1 DASY System Description .................................................................................. 9 2.2 Area Scans ....................................................................................................... 11 2.3 DASY E-Field Probe ......................................................................................... 12 2.4 DATA Acquisition Electronics (DAE) and Measurement Server ........................ 13 2.5 Robot ................................................................................................................ 14 2.6 Device Holder ................................................................................................... 14 2.7 Phantom ........................................................................................................... 15 3. Tissue Simulating Liquid .............................................................................................. 16 3.1 The composition of the tissue simulating liquid ................................................ 16 3.2 Tissue Calibration Result .................................................................................. 17 3.3 Tissue Dielectric Parameters for Phantoms ..................................................... 18 4. Measurement Procedure ............................................................................................... 19 4.1 SAR System Check .......................................................................................... 19 4.2 SAR Measurement Procedure .......................................................................... 21 4.3 Absorbed Power Density (APD) ....................................................................... 22 4.4 Power Density Measurement Procedure .......................................................... 22 5. RF Exposure Limits ....................................................................................................... 23 6. Test Equipment List ...................................................................................................... 24 7. Measurement Uncertainty ............................................................................................. 27 8. Conducted Power Measurement (Including tolerance allowed for production unit) ................................................................................................................................ 30 9. Test Results ................................................................................................................... 37 9.1 Test Results Summary ..................................................................................... 37 9.2 Simultaneous Transmission .............................................................................. 41 Appendix A. System Check Data Appendix B. Highest measurement Data Appendix C. Test Setup Photographs Appendix D. Probe Calibration Data Appendix E. Dipole & Source Calibration Appendix F. Product Photos-Please refer to the file: 2620024R-Product Photos Report No.: 2620024R-SAUSV01S-A Page: 3 of 42 Competences and Guarantees DEKRA is a testing laboratory competent to carry out the tests described in this report. In order to assure the traceability to other national and international laboratories, DEKRA has a calibration and maintenance program for its measurement equipment. DEKRA guarantees the reliability of the data presented in this report, which is the result of the measurements and the tests performed to the item under test on the date and under the conditions stated in the report and it is based on the knowledge and technical facilities available at DEKRA at the time of performance of the test. DEKRA is liable to the client for the maintenance of the confidentiality of all information related to the item under test and the results of the test. The results presented in this Test Report apply only to the particular item under test established in this document. IMPORTANT: No parts of this report may be reproduced or quoted out of context, in any form or by any means, except in full, without the previous written permission of DEKRA. General conditions 1. The test results relate only to the samples tested. 2. The test results shown in the test report are traceable to the national/international standard through the calibration report of the equipment and evaluated measurement uncertainty herein. 3…

Text truncated - open the document above for the full version.

A pp endix E. Dipole & Source Calibration

Appendix D. Probe Calibration

Report No.: 2620024R-SAUSV01S-A Page: 1 of 6 Appendix B. Highest Measurement Data Report No.: 2620024R-SAUSV01S-A Page: 2 of 6 Test Laboratory: DEKRA Date: 2026/03/07 7_WLAN2.4GHz_802.11b-1M_CH11_Front_5mm_ANT Main DUT: E-BIKE ECU; Type: TM-B Communication System: UID 0, WLAN 2.4G; Frequency: 2462 MHz Communication System PAR: 0 dB Medium parameters used: f = 2462 MHz; σ = 1.82 S/m; ε r = 40.47; ρ = 1000 kg/m 3 Phantom section: Flat Section Measurement Standard: DASY5 (IEEE/IEC/ANSI C63.19-2011) DASY Configuration: • Probe: EX3DV4 - SN3975 ; ConvF(6.66, 7.14, 6.96) @ 2462 MHz; Calibrated: 2025/08/06 • Sensor-Surface: 1.4mm (Mechanical Surface Detection) • Electronics: DAE4 Sn910; Calibrated: 2025/07/14 • Phantom: ELI V8.0; Type: QD OVA 004 AA; Serial: 2139 • Measurement SW: DASY52, Version 52.10 (4); Configuration/Flat/Area Scan (9x16x1): Measurement grid: dx=12mm, dy=12mm Maximum value of SAR (measured) = 0.285 W/kg Configuration/Flat/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 14.95 V/m; Power Drift = 0.19 dB Peak SAR (extrapolated) = 0.493 W/kg SAR(1 g) = 0.233 W/kg; SAR(10 g) = 0.109 W/kg Smallest distance from peaks to all points 3 dB below = 7.2 mm Ratio of SAR at M2 to SAR at M1 = 51.3% Maximum value of SAR (measured) = 0.390 W/kg Report No.: 2620024R-SAUSV01S-A Page: 3 of 6 Test Laboratory: DEKRA Date: 2026/03/07 18_Bluetoooth_BLE-1M_CH39_Front_5mm_ANT Main DUT: E-BIKE ECU; Type: TM-B Communication System: UID 0, BT 1M&3M&BLE; Frequency: 2480 MHz Communication System PAR: 0 dB Medium parameters used: f = 2480 MHz; σ = 1.85 S/m; ε r = 40.33; ρ = 1000 kg/m 3 Phantom section: Flat Section Measurement Standard: DASY5 (IEEE/IEC/ANSI C63.19-201 1) DASY Configuration: • Probe: EX3DV4 - SN3975; ConvF(6.66, 7.14, 6.96) @ 2480 MHz; Calibrated: 2025/08/06 • Sensor-Surface: 1.4mm (Mechanical Surface Detection) • Electronics: DAE4 Sn910; Calibrated: 2025/07/14 • Phantom: ELI V8.0; Type: QD OVA 004 AA; Serial: 2139 • Measurement SW: DASY52, Version 52.10 (4); Configuration/Flat/Area Scan (9x16x1): Measurement grid: dx=12mm, dy=12mm Maximum value of SAR (measured) = 0.0454 W/kg Configuration/Flat/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 5.607 V/m; Power Drift = 0.11 dB Peak SAR (extrapolated) = 0.0610 W/kg SAR(1 g) = 0.033 W/kg; SAR(10 g) = 0.018 W/kg Smallest distance from peaks to all points 3 dB below: Larger than measurement grid (> 15 mm) Ratio of SAR at M2 to SAR at M1 = 53.9% Maximum value of SAR (measured) = 0.0529 W/kg Report No.: 2620024R-SAUSV01S-A Page: 4 of 6 Test Laboratory: DEKRA Date: 2026/03/04 1_LTE_Band2_QPSK_20M_18900_1RB-0offset_Front_5mm_ANT Main DUT: E-BIKE ECU; Type: TM-B Communication System: UID 0, LTE Band2; Frequency: 1880 MHz Communication System PAR: 0 dB Medium parameters used: f = 1880 MHz; σ = 1.41 S/m; ε r = 41.31; ρ = 1000 kg/m 3 Phantom section: Flat Section Measurement Standard: DASY5 (IEEE/IEC/ANSI C63.19-2011) DASY Configuration: • Probe: EX3DV4 - SN3975; ConvF(7.19, 7.71, 7.52) @ 1880 MHz; Calibrated: 2025/08/06 • Sensor-Surface: 1.4mm (Mechanical Surface Detection) • Electronics: DAE4 Sn910; Calibrated: 2025/07/14 • Phantom: ELI V8.0; Type: QD OVA 004 AA; Serial: 2139 • Measurement SW: DASY52, Version 52.10 (4); Configuration/Flat/Area Scan (8x17x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.383 W/kg Configuration/Flat/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 6.222 V/m; Power Drift = -0.17 dB Peak SAR (extrapolated) = 0.624 W/kg SAR(1 g) = 0.361 W/kg; SAR(10 g) = 0.202 W/kg Smallest distance from peaks to all points 3 dB below = 8.6 mm Ratio of SAR at M2 to SAR at M1 = 59.1% Maximum value of SAR (measured) = 0.522 W/kg Report No.: 2620024R-SAUSV01S-A Page: 5 of 6 Test Laboratory: DEKRA Date: 2026/02/24 3_LTE_Band12_QPSK_10M_23095_1RB-0offset_Front_5mm_ANT Main DUT: E-BIKE ECU; Type: TM-B Communication System: UID 0, LTE Band12; Frequency: 707.5 MHz Communication System PAR: 0 dB Medium parameters used: f = 707.5 MHz; σ = 0.87 S/m; ε r = 42.21; ρ = 1000 kg/m 3 Phantom section: Flat Section Measurement Standard: DASY5 (IEEE/IEC/ANSI C63.19-2011) DASY Configuration: • Probe: EX3DV4 - SN3975; ConvF(9.08, 9.74, 9.5) @ 707.5 MHz; Calibrated: 2025/08/06 • Sensor-Surface: 1.4mm (Mechanical Surface Detection) • Electronics: DAE4 Sn910; Calibrated: 2025/07/14 • Phantom: ELI V8.0; Type: QD OVA 004 AA; Serial: 2139 • Measurement SW: DASY52, Version 52.10 (4); Configuration/Flat/Area Scan (8x14x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.274 W/kg Configuration/Flat/Zoom Scan (6x6x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 19.74 V/m; Power Drift = -0.18 dB Peak SAR (extrapolated) = 0.337 W/kg SAR(1 g) = 0.226 W/kg; SAR(10 g) = 0.144 W/kg Smallest distance from peaks to all points 3 dB below = 12.2 mm Ratio of SAR at M2 to SAR at M1 = 66.8% Maximum value of SAR (measured) = 0.299 W/kg Report No.: 2620024R-SAUSV01S-A Page: 6 of 6 Test Laboratory: DEKRA Date: 2026/02/26 4_LTE_Band66_QPSK_20M_132322_1RB-0offset_Front_5mm_ANT Main DUT: E-BIKE ECU; Type: TM-B Communication System: UID 0, LTE-FDD Band66; Frequency: 1745 MHz Communication System PAR: 0 dB Medium parameters used: f = 1745 MHz; σ = 1.38 S/m; ε r = 41.07; ρ = 1000 kg/m 3 Phantom section: Flat Section Measurement Standard: DASY5 (IEEE/IEC/ANSI C63.19-2011) DASY Configuration: • Probe: EX3DV4 - SN3975; ConvF(7.38, 7.91, 7.72) @ 1745 MHz; Calibrated: 2025/08/06 • Sensor-Surface: 1.4mm (Mechanical Surface Detection) • Electronics: DAE4 Sn910; Calibrated: 2025/07/14 • Phantom: ELI V8.0; Type: QD OVA 004 AA; Serial: 2139 • Measurement SW: DASY52, Version 52.10 (4); Configuration/Flat/Area Scan (8x14x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.439 W/kg Configuration/Flat/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 1.753 V/m; Power Drift…

Text truncated - open the document above for the full version.

Report No.: 2620024R-SAUSV01S-A Page: 1 of 5 Appendix A. System Check Data Report No.: 2620024R-SAUSV01S-A Page: 2 of 5 Test Laboratory: DEKRA Date: 2026/02/24 System Performance Check_750MHz-Head DUT: D750V3; Type: D750V3 Communication System: UID 0, CW; Frequency: 750 MHz Communication System PAR: 0 dB Medium parameters used: f = 750 MHz; σ = 0.91 S/m; ε r = 41.9; ρ = 1000 kg/m 3 Phantom section: Flat Section Measurement Standard: DASY5 (IEEE/IEC/ANSI C63.19-2011) DASY Configuration: • Probe: EX3DV4 - SN3975; ConvF(9.08, 9.74, 9.5) @ 750 MHz; Calibrated: 2025/08/06 • Sensor-Surface: 1.4mm (Mechanical Surface Detection) • Electronics: DAE4 Sn910; Calibrated: 2025/07/14 • Phantom: ELI V8.0; Type: QD OVA 004 AA; Serial: 2139 • Measurement SW: DASY52, Version 52.10 (4); Configuration/750MHz/Area Scan (8x13x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 2.80 W/kg Configuration/750MHz/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 56.99 V/m; Power Drift = 0.07 dB Peak SAR (extrapolated) = 3.16 W/kg SAR(1 g) = 2.2 W/kg; SAR(10 g) = 1.48 W/kg Smallest distance from peaks to all points 3 dB below = 16 mm Ratio of SAR at M2 to SAR at M1 = 69.4% Maximum value of SAR (measured) = 2.86 W/kg Report No.: 2620024R-SAUSV01S-A Page: 3 of 5 Test Laboratory: DEKRA Date: 2026/02/26 System Performance Check_1750MHz-Head-1 DUT: D1750V2; Type: D1750V2 Communication System: UID 0, CW; Frequency: 1750 MHz Communication System PAR: 0 dB Medium parameters used: f = 1750 MHz; σ = 1.39 S/m; ε r = 40.88; ρ = 1000 kg/m 3 Phantom section: Flat Section Measurement Standard: DASY5 (IEEE/IEC/ANSI C63.19-2011) DASY Configuration: • Probe: EX3DV4 - SN3975; ConvF(7.38, 7.91, 7.72) @ 1750 MHz; Calibrated: 2025/08/06 • Sensor-Surface: 1.4mm (Mechanical Surface Detection) • Electronics: DAE4 Sn910; Calibrated: 2025/07/14 • Phantom: ELI V8.0; Type: QD OVA 004 AA; Serial: 2139 • Measurement SW: DASY52, Version 52.10 (4); Configuration/1750MHz/Area Scan (8x8x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 10.6 W/kg Configuration/1750MHz/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 97.32 V/m; Power Drift = 0.11 dB Peak SAR (extrapolated) = 15.1 W/kg SAR(1 g) = 8.61 W/kg; SAR(10 g) = 4.76 W/kg Smallest distance from peaks to all points 3 dB below = 10.7 mm Ratio of SAR at M2 to SAR at M1 = 60.9% Maximum value of SAR (measured) = 12.5 W/kg Report No.: 2620024R-SAUSV01S-A Page: 4 of 5 Test Laboratory: DEKRA Date: 2026/03/04 System Performance Check_1950MHz-Head-1 DUT: D1950V3; Type: D1950V3 Communication System: UID 0, CW (0); Frequency: 1950 MHz Communication System PAR: 0 dB Medium parameters used: f = 1950 MHz; σ = 1.42 S/m; ε r = 41.07; ρ = 1000 kg/m 3 Phantom section: Flat Section Measurement Standard: DASY5 (IEEE/IEC/ANSI C63.19-2011) DASY Configuration: • Probe: EX3DV4 - SN3975; ConvF(7.19, 7.71, 7.52) @ 1950 MHz; Calibrated: 2025/08/06 • Sensor-Surface: 1.4mm (Mechanical Surface Detection) • Electronics: DAE4 Sn910; Calibrated: 2025/07/14 • Phantom: ELI V8.0; Type: QD OVA 004 AA; Serial: 2139 • Measurement SW: DASY52, Version 52.10 (4); Configuration/1950MHz/Area Scan (8x8x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 13.3 W/kg Configuration/1950MHz/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 104.9 V/m; Power Drift = 0.11 dB Peak SAR (extrapolated) = 17.6 W/kg SAR(1 g) = 10.4 W/kg; SAR(10 g) = 5.53 W/kg Smallest distance from peaks to all points 3 dB below = 9.6 mm Ratio of SAR at M2 to SAR at M1 = 59.2% Maximum value of SAR (measured) = 15.4 W/kg Report No.: 2620024R-SAUSV01S-A Page: 5 of 5 Test Laboratory: DEKRA Date: 2026/03/07 System Performance Check_2450MHz-Head DUT: D2450V2; Type: D2450V2 Communication System: UID 0, CW; Frequency: 2450 MHz Communication System PAR: 0 dB Medium parameters used: f = 2450 MHz; σ = 1.81 S/m; ε r = 40.51; ρ = 1000 kg/m 3 Phantom section: Flat Section Measurement Standard: DASY5 (IEEE/IEC/ANSI C63.19-2011) DASY Configuration: • Probe: EX3DV4 - SN3975; ConvF(6.66, 7.14, 6.96) @ 2450 MHz; Calibrated: 2025/08/06 • Sensor-Surface: 1.4mm (Mechanical Surface Detection) • Electronics: DAE4 Sn910; Calibrated: 2025/07/14 • Phantom: ELI V8.0; Type: QD OVA 004 AA; Serial: 2139 • Measurement SW: DASY52, Version 52.10 (4); Configuration/2450MHz_Head/Area Scan (10x10x1): Measurement grid: dx=12mm, dy=12mm Maximum value of SAR (measured) = 17.6 W/kg Configuration/2450MHz_Head/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 99.86 V/m; Power Drift = 0.12 dB Peak SAR (extrapolated) = 23.9 W/kg SAR(1 g) = 12.3 W/kg; SAR(10 g) = 6 W/kg Smallest distance from peaks to all points 3 dB below = 9 mm Ratio of SAR at M2 to SAR at M1 = 54.3% Maximum value of SAR (measured) = 19.4 W/kg

Wi-Fi/BT Antenna Brand: Hong-Bo Part No.: 290-11601 Antenna Specification Antenna Type PIFA Antenna Antenna Part Number 290-11601 Measurement frequency 2400MHz ~2500MHz Antenna cable color White Antenna cable length 133 mm Antenna cable diameter 1.37 mm Connector I-PEX Antenna Return Loss Antenna Efficiency & Peak Gain Frequency (MHz) Efficiency (dB) Peak Gain (dBi) 2400 -3.24 3.71 2412 -3.33 3.30 2437 -3.63 3.28 2450 -3.64 3.15 2462 -3.63 3.18 2483 -3.65 3.55 2500 -3.56 3.52 Radiation characteristics of antenna loaded in Host Platform 2400 MHz 2410 MHz 2437 MHz 2450 MHz 2462 MHz 2483 MHz 2500 MHz

Report No: 2620024R-RFUSV01S-A Page: 1 of 35 Appendix A. Test Result of AC Power Line Conducted Emission Owing to the battery operation of EUT, this test item is not performed. Report No: 2620024R-RFUSV01S-A Page: 2 of 35 Appendix B. 6 dB Bandwidth Modulation Frequency (MHz) DTS Bandwidth (MHz) Limit (MHz) Result 802.11b (20MHz) 2412 9.04 ≧ 0.50 Pass 2437 9.04 ≧ 0.50 Pass 2462 9.04 ≧ 0.50 Pass 802.11g (20MHz) 2412 16.36 ≧ 0.50 Pass 2437 16.32 ≧ 0.50 Pass 2462 12.64 ≧ 0.50 Pass 802.11n (20MHz) 2412 15.00 ≧ 0.50 Pass 2437 15.36 ≧ 0.50 Pass 2462 17.56 ≧ 0.50 Pass Report No: 2620024R-RFUSV01S-A Page: 3 of 35 802.11b/20MHz/1M/2412MHz/Ch1/Ant.1 802.11b/20MHz/1M/2437MHz/Ch6/Ant.1 802.11b/20MHz/1M/2462MHz/Ch11/Ant.1 802.11g/20MHz/6M/2412MHz/Ch1/Ant.1 802.11g/20MHz/6M/2437MHz/Ch6/Ant.1 802.11g/20MHz/6M/2462MHz/Ch11/Ant.1 Report No: 2620024R-RFUSV01S-A Page: 4 of 35 802.11n/20MHz/MCS0/2412MHz/Ch1/Ant.1 802.11n/20MHz/MCS0/2437MHz/Ch6/Ant.1 802.11n/20MHz/MCS0/2462MHz/Ch11/Ant.1 Report No: 2620024R-RFUSV01S-A Page: 5 of 35 Appendix C. Test Result of Maximum Peak Conducted Output Power Average Modulation Frequency (MHz) Maximum Conducted Output Power (dBm) Limit (dBm) Result 802.11b (20MHz) 2412 12.70 30.00 Pass 2437 12.64 30.00 Pass 2462 12.50 30.00 Pass 802.11g (20MHz) 2412 12.50 30.00 Pass 2437 12.45 30.00 Pass 2462 12.38 30.00 Pass 802.11n (20MHz) 2412 12.43 30.00 Pass 2437 12.40 30.00 Pass 2462 12.38 30.00 Pass Peak Modulation Frequency (MHz) Maximum Peak Conducted Output Power (dBm) Limit (dBm) Result 802.11b (20MHz) 2412 14.90 30.00 Pass 2437 14.90 30.00 Pass 2462 14.74 30.00 Pass 802.11g (20MHz) 2412 21.71 30.00 Pass 2437 21.11 30.00 Pass 2462 21.26 30.00 Pass 802.11n (20MHz) 2412 20.34 30.00 Pass 2437 20.37 30.00 Pass 2462 20.21 30.00 Pass Report No: 2620024R-RFUSV01S-A Page: 6 of 35 Appendix D. Test Result of Power Spectral Density Modulation Frequency (MHz) Maximum Power Spectral Density (dBm/3kHz) Limit (dBm/3kHz) Result 802.11b (20MHz) 2412 -12.77 8.00 Pass 2437 -13.19 8.00 Pass 2462 -13.03 8.00 Pass 802.11g (20MHz) 2412 -16.07 8.00 Pass 2437 -16.13 8.00 Pass 2462 -16.21 8.00 Pass 802.11n (20MHz) 2412 -15.22 8.00 Pass 2437 -15.33 8.00 Pass 2462 -15.48 8.00 Pass Report No: 2620024R-RFUSV01S-A Page: 7 of 35 802.11b/20MHz/1M/2412MHz/Ch1/Ant.1 802.11b/20MHz/1M/2437MHz/Ch6/Ant.1 802.11b/20MHz/1M/2462MHz/Ch11/Ant.1 802.11g/20MHz/6M/2412MHz/Ch1/Ant.1 802.11g/20MHz/6M/2437MHz/Ch6/Ant.1 802.11g/20MHz/6M/2462MHz/Ch11/Ant.1 Report No: 2620024R-RFUSV01S-A Page: 8 of 35 802.11n/20MHz/MCS0/2412MHz/Ch1/Ant.1 802.11n/20MHz/MCS0/2437MHz/Ch6/Ant.1 802.11n/20MHz/MCS0/2462MHz/Ch11/Ant.1 Report No: 2620024R-RFUSV01S-A Page: 9 of 35 Appendix E. Test Result of Antenna Port Conducted Emission Modulation Measurement Level Δ (dB) Result 802.11b (20MHz) > 20 PASS 802.11g (20MHz) > 20 PASS 802.11n (20MHz) > 20 PASS Report No: 2620024R-RFUSV01S-A Page: 10 of 35 802.11b/20MHz/1M/2412MHz/Ch1/Ant.1 (Ref.) 802.11b/20MHz/1M/2412MHz/Ch1/Ant.1 802.11b/20MHz/1M/2437MHz/Ch6/Ant.1 (Ref.) 802.11b/20MHz/1M/2437MHz/Ch6/Ant.1 802.11b/20MHz/1M/2462MHz/Ch11/Ant.1 (Ref.) 802.11b/20MHz/1M/2462MHz/Ch11/Ant.1 Report No: 2620024R-RFUSV01S-A Page: 11 of 35 802.11g/20MHz/6M/2412MHz/Ch1/Ant.1 (Ref.) 802.11g/20MHz/6M/2412MHz/Ch1/Ant.1 802.11g/20MHz/6M/2437MHz/Ch6/Ant.1 (Ref.) 802.11g/20MHz/6M/2437MHz/Ch6/Ant.1 802.11g/20MHz/6M/2462MHz/Ch11/Ant.1 (Ref.) 802.11g/20MHz/6M/2462MHz/Ch11/Ant.1 Report No: 2620024R-RFUSV01S-A Page: 12 of 35 802.11n/20MHz/MCS0/2412MHz/Ch1/Ant.1 (Ref.) 802.11n/20MHz/MCS0/2412MHz/Ch1/Ant.1 802.11n/20MHz/MCS0/2437MHz/Ch6/Ant.1 (Ref.) 802.11n/20MHz/MCS0/2437MHz/Ch6/Ant.1 802.11n/20MHz/MCS0/2462MHz/Ch11/Ant.1 (Ref.) 802.11n/20MHz/MCS0/2462MHz/Ch11/Ant.1 Report No: 2620024R-RFUSV01S-A Page: 13 of 35 802.11b/20MHz/1M/2412MHz/Ch1/Ant.1(Band Edge) 802.11b/20MHz/1M/2462MHz/Ch11/Ant.1(Band Edge) 802.11g/20MHz/6M/2412MHz/Ch1/Ant.1(Band Edge) 802.11g/20MHz/6M/2462MHz/Ch11/Ant.1(Band Edge) 802.11n/20MHz/MCS0/2412MHz/Ch1/Ant.1(Band Edge) 802.11n/20MHz/MCS0/2462MHz/Ch11/Ant.1(Band Edge) Report No: 2620024R-RFUSV01S-A Page: 14 of 35 Appendix F. Test Result of Radiated Emission TX_b_2412MHz_H TX_b_2412MHz_V TX_b_2437MHz_H TX_b_2437MHz_V Report No: 2620024R-RFUSV01S-A Page: 15 of 35 TX_b_2462MHz_H TX_b_2462MHz_V TX_g_2412MHz_H TX_g_2412MHz_V Report No: 2620024R-RFUSV01S-A Page: 16 of 35 TX_g_2437MHz_H TX_g_2437MHz_V TX_g_2462MHz_H TX_g_2462MHz_V Report No: 2620024R-RFUSV01S-A Page: 17 of 35 TX_n20_2412MHz_H TX_n20_2412MHz_V TX_n20_2437MHz_H TX_n20_2437MHz_V Report No: 2620024R-RFUSV01S-A Page: 18 of 35 TX_n20_2462MHz_H TX_n20_2462MHz_V TX_n20_2437MHz_H TX_n20_2437MHz_V Report No: 2620024R-RFUSV01S-A Page: 19 of 35 TX_b_2412MHz_H_Average TX_b_2412MHz_H_Peak TX_b_2412MHz_V_Average TX_b_2412MHz_V_Peak Report No: 2620024R-RFUSV01S-A Page: 20 of 35 TX_b_2462MHz_H_Average TX_b_2462MHz_H_Peak TX_b_2462MHz_V_Average TX_b_2462MHz_V_Peak Report No: 2620024R-RFUSV01S-A Page: 21 of 35 TX_g_2412MHz_H_Average TX_g_2412MHz_H_Peak TX_g_2412MHz_V_Average TX_g_2412MHz_V_Peak Report No: 2620024R-RFUSV01S-A Page: 22 of 35 TX_g_2462MHz_H_Average TX_g_2462MHz_H_Peak TX_g_2462MHz_V_Average TX_g_2462MHz_V_Peak Report No: 2620024R-RFUSV01S-A Page: 23 of 35 TX_n20_2412MHz_H_Average TX_n20_2412MHz_H_Peak TX_n20_2412MHz_V_Average TX_n20_2412MHz_V_Peak Report No: 2620024R-RFUSV01S-A Page: 24 of 35 TX_n20_2462MHz_H_Average TX_n20_2462MHz_H_Peak TX_n20_2462MHz_V_Average TX_n20_2462MHz_V_Peak Report No: 2620024R-RFUSV01S-A Page: 25 of 35 Appendix G. Test Result of Radiated Emissions Co-location TX_CatM1_B12_QPSK_CH23095+BLE1M_CH0+NFC+UWB _CH9_H TX_CatM1_B12_QPSK_CH23095+BLE1M_CH0+NFC+UWB _CH9_V TX_CatM1_B2_QPSK_CH18900+BLE1M_CH0+NFC+UWB_ CH9_H TX_CatM1_B2_QPSK_CH18900+BLE1M_CH0+NFC+UWB_ CH9_V Report No: 2620024R-RFUSV01S-A Page: 26 of 35 TX_CatM1_B4_QPSK_CH20050+BLE1M_CH0+NFC+UWB_ CH9_H TX_CatM1_B4_QPSK_CH20050+BLE1M_CH0+NFC+UWB_ CH9_V TX_CatM1_B66_QPSK_CH132072+BLE1M_CH0+NFC+UW B_CH9_H TX_CatM1_B66_QPSK_CH132072+BLE1M_CH0+NFC+UW B_CH9_V Report No: 2620024R-RFUSV01S-…

Text truncated - open the document above for the full version.

Report No.: 2620024R-RFUSV01S-B Page: 1 of 22 Test Report No: 2620024R-RFUSV01S-B TEST REPORT FCC Rules & Regulations Product Name e-bike Brand Name ALSO Model No. TMB-CON FCC ID 2BVBP-TMB-CON Contains FCC ID 2ANPO00NRF9151 Applicant ́s Name / Address ALSO INC 450 Lambert Ave, Palo Alto, CA 94306 USA Manufacturer’s Name ALSO INC Test Method Requested, Standard FCC CFR Title 47 Part 15 Subpart C Section 15.247 Verdict Summary IN COMPLIANCE Documented by Jinn Chen Approved by Alan Chen Date of Receipt 2026/02/02 Date of Issue 2026/06/02 Report Version V1.0 Report No.: 2620024R-RFUSV01S-B Page: 2 of 22 INDEX page Competences and Guarantees ............................................................................................................................... 4 General Conditions ................................................................................................................................................. 4 Revision History ...................................................................................................................................................... 5 Summary of Test Result .......................................................................................................................................... 6 1. General Information ................................................................................................................................. 7 1.1. EUT Description ...................................................................................................................................... 7 1.2. EUT Information ...................................................................................................................................... 8 1.3. Testing Location Information ................................................................................................................... 8 1.4. Measurement Uncertainty ....................................................................................................................... 9 1.5. List of Test Equipment ........................................................................................................................... 10 2. Test Configuration of EUT ..................................................................................................................... 11 2.1. Test Condition ........................................................................................................................................ 11 2.2. Test Frequency Mode ............................................................................................................................ 11 2.3. Duty Cycle ............................................................................................................................................. 12 2.4. Measurement Configuration .......................................................................................…

Text truncated - open the document above for the full version.