2BVCPGC603606MAG1

Certification designating a U.S. Agent for service of process: As required by section 2.911(d)(7), the applicant must designate a contact located in the United States for purposes of acting as the applicant’s agent for service of process, regardless of whether the applicant is a domestic or foreign entity. An applicant located in the United States may designate itself as the agent for service of process. In either scenario, the designation of the U.S. agent for service of process should be provided as an attachment to the equipment authorization application. The applicant must provide a written certification, which must: i. Be signed by both the applicant and designated agent for service of process, if the agent is different from the applicant. ii. Acknowledge the applicant’s consent and the designated agent’s obligation to accept service of process. iii. Provide a physical U.S. address and email for the designated agent. iv. Acknowledge the applicant’s acceptance to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Unofficial information provided by FCC personnel on February 14, 2023, via the monthly call with the TCB Council: The Agent for Process of Service: • cannot be a TCB or affiliated with a TCB (e.g. could not be a person who works for a TCB or a company that owns or is owned by the TCB) • cannot be a [FCC recognised] Lab or affiliated with a test lab (e.g. could not be a person who works for a Lab or a company that owns or is owned by the Lab) • Agent can be Individual Entity or a Company Entity • Agent Entity must be located in US, US address/phone • Entity acting as Agent must have FRN (best practice, put FRN on Agent Letter) • Agent letter does not have to be FCC ID specific, can be general Agent for Grantee For devices being marketed or for which marketing has ceased for less than 1 year, if the Agent for Process of Service changes, then for every TC Number the TCB must request the FCC to put application into Audit Mode and Agent Letter needs to be updated (superseded). NOTE: The U.S. Agent for Service of Process should not be confused with the authorized agent used for signing the 731 form, other cover letters within the application, and/or the agent who may interface with the TCB. magne ai global tech limited U.S. Agent Designation for Service of Process ATTENTION: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA REGARDING: FCC Certification – Section 2.911(d)(7) Information Designated U.S. Agent Company Name: Approve-IT, Inc. Contact Name: Nathan Grinager Street Address: 8011 34 th Ave South, Suite 342 City/Province/Zip: Bloomington, MN 55425 Telephone No: 651-247-167 8 Email: [email protected] FRN #: 0027533835 This letter is to confirm that we (“the Designated U.S. Agent) have accepted the responsibility to act as the Designated U.S. Agent for Service of Process as required by section 47 CFR 2.911(d)(7) on behalf of the Applicant noted below. U.S. Agent Signature: Date: April 16, 2026 Signed by (Printed Name/Title): Nathan Gr inager / Co-President The Applicant confirms its explicit consent and acknowledges that they must maintain an agent for no less than one year after terminating all marketing and importation OR the conclusion of any Commission-related proceeding involving the equipment. The applicant further acknowledges their responsibility to inform the FCC whenever the Designated U.S. Agent information above changes. Appl icant Company name: magne ai global tech limited Grantee FRN: 0038191318 FCC ID: 2BVCPGC603606 Contact Name: jiahong lun Street Address: FLAT 1019B,10/F,LIVEN HOUSE,N0.61-63 KING YIP ST, kwun tong, City/Province/Zip: Hong Kong Telephone No: 008613302564094 Email: [email protected] Appl icant Signature: Da te:2026.04.16 Sig ned by (Printed Name/Title): Aaron Lun / CEO

Model：MA1 FCC
ID:

2BVCPGC603606
U.S.

Sporton International Inc. (Kunshan) Page Number : 1 of 22 TEL : +86-512-57900158 Report Issued Date : Apr. 16, 2026 FCC ID : 2BVCPGC603606 Report Version : Rev. 01 Report Template No.: BU5-FC15B Version 3.0 FCC Test Report Report No. : FC612311 FCC Test Report APPLICANT : Magne AI Global tech limited EQUIPMENT : MAG1 BRAND NAME : MaQ MODEL NAME : MA1 FCC ID : 2BVCPGC603606 STANDARD : 47 CFR Part 15 Subpart B CLASSIFICATION : Certification TEST DATE(S) : Feb. 05, 2026 ~ Apr. 10, 2026 We, Sporton International Inc. (Kunshan), would like to declare that the tested sample has been evaluated in accordance with the test procedures given in ANSI C63.4-2014 and has been in compliance with the applicable technical standards. The test results in this report apply exclusively to the tested model / sample. Without written approval of Sporton International Inc. (Kunshan), the test report shall not be reproduced except in full. Approved by: Jason Jia Sporton International Inc. (Kunshan) No. 1098, Pengxi North Road, Kunshan Economic Development Zone Jiangsu Province 215300 People’s Republic of China Sporton International Inc. (Kunshan) Page Number : 2 of 22 TEL : +86-512-57900158 Report Issued Date : Apr. 16, 2026 FCC ID : 2BVCPGC603606 Report Version : Rev. 01 Report Template No.: BU5-FC15B Version 3.0 FCC Test Report Report No. : FC612311 TABLE OF CONTENTS REVISION HISTORY .......................................................................................................................................... 3 SUMMARY OF TEST RESULT ......................................................................................................................... 4 1. GENERAL DESCRIPTION .......................................................................................................................... 5 1.1. Applicant ............................................................................................................................................ 5 1.2. Manufacturer ..................................................................................................................................... 5 1.3. Product Feature of Equipment Under Test ....................................................................................... 5 1.4. Product Specification of Equipment Under Test ............................................................................... 6 1.5. Modification of EUT ........................................................................................................................... 7 1.6. Test Location ..................................................................................................................................... 8 1.7. Test Software .................................................................................................................................... 8 1.8. Applicable Standards ........................................................................................................................ 8 2. TEST CONFIGURATION OF EQUIPMENT UNDER TEST ........................................................................ 9 2.1. Test Mode ......................................................................................................................................... 9 2.2. Connection Diagram of Test System .............................................................................................. 10 2.3. Support Unit used in test configuration and system ........................................................................ 11 2.4. EUT Operation Test Setup .............................................................................................................. 11 3. TEST RESULT ........................................................................................................................................... 12 3.1. Test of AC Conducted Emission Measurement .............................................................................. 12 3.2. Test of Radiated Emission Measurement ....................................................................................... 16 4. LIST OF MEASURING EQUIPMENT ........................................................................................................ 21 5. MEASUREMENT UNCERTAINTY ............................................................................................................ 22 APPENDIX A. SETUP PHOTOGRAPHS Sporton International Inc. (Kunshan) Page Number : 3 of 22 TEL : +86-512-57900158 Report Issued Date : Apr. 16, 2026 FCC ID : 2BVCPGC603606 Report Version : Rev. 01 Report Template No.: BU5-FC15B Version 3.0 FCC Test Report Report No. : FC612311 REVISION HISTORY REPORT NO. VERSION DESCRIPTION ISSUED DATE FC612311 Rev. 01 Initial issue of report Apr. 16, 2026 Sporton International Inc. (Kunshan) Page Number : 4 of 22 TEL : +86-512-57900158 Report Issued Date : Apr. 16, 2026 FCC ID : 2BVCPGC603606 Report Version : Rev. 01 Report Template No.: BU5-FC15B Version 3.0 FCC Test Report Report No. : FC612311 SUMMARY OF TEST RESULT Report Section FCC Rule Description Limit Result Remark 3.1 15.107 AC Conducted Emission < 15.107 limits PASS Under limit 7.26 dB at 0.154 MHz 3.2 15.109 Radiated Emission < 15.109 limits PASS Under limit 9.79 dB at 39.94 MHz for Quasi-Peak Conformity Assessment Condition: The test results (PASS/FAIL) with all measurement uncertainty excluded are presented against the regulation limits or in accordance with the requirements stipulated by the applicant/manufacturer who shall bear all the risks of non-compliance that may potentially occur if measurement uncertainty is taken into account. Please refer to each test results in the section “Measurement Uncertainty”. Disclaimer: The product specifications of the EUT presented in the test report that may affect the test assessments are declared by the manufacturer who shall take full responsibility for the authenticity. Sporton International Inc. (Kunshan) Page Number : 5 of 22 TEL : +86…

Text truncated - open the document above for the full version.