2BVCU-LL1Pocket Linglong

Instructions for Use Before using the device, please read the following safety information to ensure safe and proper use. Do not disassemble or modify this equipment on your own. Avoid subjecting the device to severe shaking, physical impact, or compression. Keep foreign objects such as liquids or metals from entering the equipment. Keep the equipment dry and do not use it outdoors during thunderstorms. Avoid placing the product in harsh environments such as high humidity, dust, heat sources, and direct sunlight. Store the device in a cool, dry place. Use only chargers and accessories approved by the manufacturer. Avoid using volatile cleaning products such as alcohol, benzene, or solvents to prevent damage and malfunction. Disassembling or replacing parts and batteries on your own may pose a risk of electric shock and explosion. This device is not recommended for use by minors under 13 years old. When minors under 13 or elderly individuals over 65 use it, guardians should monitor their usage and ensure intermittent use and rest. Contact Information Website： http://www.firstarpc.com Common Operations of Touchpad Touchpad Presets Open [Settings] > [Bluetooth & other devices] > [Touchpad] to configure presets or customize gestures. Single-finger operation: Single-finger tap equals a left mouse click. Double-finger swipe (up or down): Simulates mouse scroll wheel function. Double-finger spread or pinch: Zooms in or out of the page. Three-finger tap: Opens the "Search" page. Three-finger swipe (left or right): Quickly switch between applications. Three-finger swipe (up): Opens the task view. Three-finger swipe (down): Returns to the desktop. Four-finger operation: Swipe left or right to switch desktops, tap to open the "Notification Center". Default General Operations: Double-finger tap: Equivalent to a right mouse click. Before using the product for the first time, please read this manual carefully and keep it in a safe place. Lunar device Product Packing List Power AdapterUser Manual1.5m Fast Charging Cable Product Function Illustration ① Power Button ② Type-C 3.2 Port ③ Type-C 4.0 Port ④ USB-A 3.0 Port ⑤ Power and Battery Indicator Light ⑥ Custom Button ⑦ Touchpad ⑧ Keyboard Lock Latch ⑨ Function Area (Fn+) F1 Linglong Assistant F2 Offline WiFi F3 Bluetooth Keyboard F4 Virtual Monitor F5 Silent Mode F6 Balanced Mode F7 Expert Mode F8 Touchpad Toggle F9 Mute F10 Volume Down F11 Volume Up Make sure the device is turned off or in sleep mode before storing it. Otherwise, prolonged exposure to a sealed environment may cause the device to overheat and result in irreversible hardware damage. ① ② ③ ④ ⑥ ⑤ ⑦ ⑧ ⑨ LingLong Product Manual Federal Communication Commission Interference Statement FCC ID: 2BVCU-LL1 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. Radiation Exposure Statement: This device meets the government’s requirements for exposure to radio waves. This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government. The exposure standard for wireless device employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6W/kg. Tests for SAR are conducted using standard operating positions (0mm) accepted by the FCC with the device transmitting at its highest certified power level in all tested frequency bands.

Attestation Statements Date: 2026-03-30 TO: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046, USA RE: Attestation Statements Part 2.911(d)(7) request for(FCC ID: 2BVCU-LL1) Shanghai firstarpc technology, the undersigned, hereby authorize FCC US Agent, LLC to act as our designated agent for service of process, Shanghai firstarpc technology accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. FCC US Agent, LLC accepts the responsibility to act as designated agent for service of process. Applicant Information： Company name: Shanghai firstarpc technology Contact Name: Marrian ZHANG Address: 3rd floor, building 2, No. 200, Zhangheng Road, Free Trade Pilot Zone, Shanghai, China Telephone No: 13916864291 Email: [email protected] FRN: 0038197547 Signature: Marrian ZHANG Agent Information: Company Name: FCC US Agent, LLC Address:3722 Illinois Avenue, Saint Charles, IL, 60174, USA FRN: 0033402884 Contact Name: Tim Payne Telephone No: 708-571-3148 Email: [email protected] Signature: Tim Payne

Rev 1/26/2023 Shanghai firstarpc technology Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 03-30-2026 Ref: Attestation Statements Part 2.911(d)(5)(i) Filing FCC ID: 2BVCU-LL1 Shanghai firstarpc technology certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Shanghai firstarpc technology certifies that the equipment for which authorization is sought does not include cybersecurity or anti-virus software produced or provided by Kaspersky Lab, Inc. or any of its successors and assignees, including equipment with integrated Kaspersky Lab, Inc. (or any of its successors and assignees) cybersecurity or anti-virus software pursuant to DA-24-886 and KDB 986446 D01 Covered Equipment Guidance section B(2a). √ Device is inherently compliant based on hardware limitations or software controls. or A Software Bill of Materials (SBOM) is provided to the TCB for review, and The end-user or third parties cannot install additional software on this device. Sincerely, (Applicant signature) (Marrian ZHANG) Rev 1/26/2023 Shanghai firstarpc technology Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 03-30-2026 Ref: Attestation Statements Part 2.911(d)(5)(ii) Filing FCC ID: 2BVCU-LL1 Shanghai firstarpc technology certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing “covered” equipment. Sincerely, (Applicant signature) (Marrian ZHANG)

Shanghai firstarpc technology Date：03-30-2026 Product Model Number: LL1 FCC ID：2BVCU-LL1 To whom it may concern, Re: Product Certification Representative Authorization Letter We authorize QAI Laboratories Ltd. 3980 North Fraser Way, Burnaby B.C. Canada V5J 5K5 to act on our behalf on all matters concerning the above named equipment. This shall include the following: • Testing • Approval applications and procedures We declare that QAI Laboratories Ltd. is allowed to forward all information related to the approval project to the applied certification body and to the notification entities and to discuss any issues concerning the approval application. Any and all acts carried out by QAI Laboratories Ltd. on our behalf shall have the same effect as acts of our own. By: Contact Listed on FCC Wesbite Title: CEO Email: [email protected] Telephone: +13916864291 On behalf of: Shanghai firstarpc technology

Shanghai firstarpc technology Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: April 8, 2026 Subject; Request for Confidentiality FCC ID: 2BVCU-LL1 To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. ○XSchematic Diagram ○XBlock Diagram Parts List ○X Operational Description Tune-up Procedure ○X Software Security Requirements for UNII devices In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s); External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: Marrian ZHANG Title: CEO

Page 1 of 3 Report No.: LGT26A226 Appendix - Photographs of EUT Constructional Details Photo 1 Photo 2 Page 2 of 3 Report No.: LGT26A226 Appendix - Photographs of EUT Constructional Details Photo 3 Photo 4 Page 3 of 3 Report No.: LGT26A226 Appendix - Photographs of EUT Constructional Details Photo 5 Photo 6

Label Size: 25*42mm FCC ID: 2BVCU-LL1 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Page 1 of 9 Report No.: LGT26A226 Appendix - Photographs of EUT Constructional Details Photo 1 Photo 2 Page 2 of 9 Report No.: LGT26A226 Appendix - Photographs of EUT Constructional Details Photo 3 Photo 4 Page 3 of 9 Report No.: LGT26A226 Appendix - Photographs of EUT Constructional Details Photo 5 Photo 6 Page 4 of 9 Report No.: LGT26A226 Appendix - Photographs of EUT Constructional Details Photo 7 Photo 8 Page 5 of 9 Report No.: LGT26A226 Appendix - Photographs of EUT Constructional Details Photo 9 Photo 10 Page 6 of 9 Report No.: LGT26A226 Appendix - Photographs of EUT Constructional Details Photo 11 Photo 12 Page 7 of 9 Report No.: LGT26A226 Appendix - Photographs of EUT Constructional Details Photo 13 Photo 14 Page 8 of 9 Report No.: LGT26A226 Appendix - Photographs of EUT Constructional Details Photo 15 Photo 16 BT/2.4G WIFI /5G WIFI ANT I Page 9 of 9 Report No.: LGT26A226 Appendix - Photographs of EUT Constructional Details Photo 17 2.4G WIFI /5G WIFI ANT 2

Page: 1/11 Ref : ACR.163.3.25.BES.B Cancel and replace the report ACR.163.3.25.BES.A SHENZHEN LGT TEST SERVICE CO., LTD. ROOM 205, BUILDING 13, ZONE B, ZHENXIONG INDUSTRIAL PARK, NO.177, RENMIN WEST ROAD, JINSHA, KENGZI STREET, PINGSHAN DISTRICT, SHENZHEN, GUANGDONG, CHINA MVG COMOSAR DOSIMETRIC E-FIELD PROBE SERIAL NO.: 2225-EPGO-450 Calibrated at MVG Z.I. de la pointe du diable Technopôle Brest Iroise – 295 avenue Alexis de Rochon 29280 PLOUZANE - FRANCE Calibration date: 06/06/2025 Accreditations #2-6789 Scope available on www.cofrac.fr The use of the Cofrac brand and the accreditation references is prohibited from any reproduction. Summary: This document presents the method and results from an accredited COMOSAR Dosimetric E-Field Probe calibration performed at MVG, using the CALIPROBE test bench, for use with a MVG COMOSAR system only. The test results covered by accreditation are traceable to the International System of Units (SI). COMOSAR E-Field Probe Calibration Report Docusign Envelope ID: D3677F92-510E-48FC-B182-CD820765136E COMOSAR E-FIELD PROBE CALIBRATION REPORT Ref: ACR.163.3.25.BES.B Page: 2/11 Template_ACR.DDD.N.YY.MVGB.ISSUE_COMOSAR Probe vM This document shall not be reproduced, except in full or in part, without the written approval of MVG. The information contained herein is to be used only for the purpose for which it is submitted and is not to be released in whole or part without written approval of MVG. Name Function Date Signature Prepared by : Pedro Ruiz Technical Manager 6/12/2025 Checked & approved by: Pedro Ruiz Technical Manager 6/12/2025 Authorized by: Kim Rutkowski Quality Manager Customer Name Distribution : SHENZHEN LGT TEST SERVICE CO., LTD. Issue Name Date Modifications A Pedro Ruiz 6/12/2025 Initial release B Pedro Ruiz 6/20/2025 Customer name & address Docusign Envelope ID: D3677F92-510E-48FC-B182-CD820765136E 6/23/2025 COMOSAR E-FIELD PROBE CALIBRATION REPORT Ref: ACR.163.3.25.BES.B Page: 3/11 Template_ACR.DDD.N.YY.MVGB.ISSUE_COMOSAR Probe vM This document shall not be reproduced, except in full or in part, without the written approval of MVG. The information contained herein is to be used only for the purpose for which it is submitted and is not to be released in whole or part without written approval of MVG. TABLE OF CONTENTS 1 Device Under Test ..................................................................................................... 4 2 Product Description ................................................................................................... 4 2.1 General Information _______________________________________________________ 4 3 Measurement Method ................................................................................................ 4 3.1 Sensitivity _______________________________________________________________ 4 3.2 Linearity ________________________________________________________________ 5 3.3 Isotropy _________________________________________________________________ 5 3.4 Boundary Effect __________________________________________________________ 5 3.5 Probe Modulation Response _________________________________________________ 6 4 Measurement Uncertainty .......................................................................................... 6 5 Calibration Results ..................................................................................................... 6 5.1 Calibration in air __________________________________________________________ 6 5.2 Calibration in liquid _______________________________________________________ 7 6 Verification Results ................................................................................................... 8 7 List of Equipment .................................................................................................... 10 Docusign Envelope ID: D3677F92-510E-48FC-B182-CD820765136E COMOSAR E-FIELD PROBE CALIBRATION REPORT Ref: ACR.163.3.25.BES.B Page: 4/11 Template_ACR.DDD.N.YY.MVGB.ISSUE_COMOSAR Probe vM This document shall not be reproduced, except in full or in part, without the written approval of MVG. The information contained herein is to be used only for the purpose for which it is submitted and is not to be released in whole or part without written approval of MVG. 1 DEVICE UNDER TEST Device Under Test Device Type COMOSAR DOSIMETRIC E FIELD PROBE Manufacturer MVG Model SSE2 Serial Number 2225-EPGO-450 Product Condition (new / used) New Frequency Range of Probe 0.15 GHz-7.5GHz Resistance of Three Dipoles at Connector Dipole 1: R1=0.226 M Dipole 2: R2=0.224 M Dipole 3: R3=0.229 M 2 PRODUCT DESCRIPTION 2.1 GENERAL INFORMATION MVG’s COMOSAR E field Probes are built in accordance to the IEC/IEEE 62209-1528 and FCC KDB865664 D01 standards. Figure 1 – MVG COMOSAR Dosimetric E field Probe Probe Length 330 mm Length of Individual Dipoles 2 mm Maximum external diameter 8 mm Probe Tip External Diameter 2.5 mm Distance between dipoles / probe extremity 1 mm 3 MEASUREMENT METHOD The IEC/IEEE 62209-1528 and FCC KDB865664 D01 standards provide recommended practices for the probe calibrations, including the performance characteristics of interest and methods by which to assess their effect. All calibrations / measurements performed meet the fore-mentioned standards. 3.1 SENSITIVITY The sensitivity factors of the three dipoles were determined using a two step calibration method (air and tissue simulating liquid) using waveguides as outlined in the standards for frequency range 600- 7500MHz and using the calorimeter cell method (transfer method) as outlined in the standards for frequency 150-450 MHz. Docusign Envelope ID: D3677F92-510E-48FC-B182-CD820765136E COMOSAR E-FIELD PROBE CALIBRATION REPORT Ref: ACR.163.3.25.BES.B Page: 5/11 Template_ACR.DDD.N.YY.MVGB.ISSUE_COMOSAR Probe vM This document shall not be reproduced, except in full or in part, without the written approval of MVG. The information contained herein is to be used only for the purpose for which it …

Text truncated - open the document above for the full version.

The test report is effective only with both signature and specialized stamp. This report shall not be reproduced except in full without the written approval of the Laboratory. The results in this report only apply to the tested sample. Shenzhen LGT Test Service Co., Ltd. Tel: 0755-89668180 E-mail:[email protected] Web: www.lgt-cert.com Room 205, Building 13, Zone B, Zhenxiong Industrial Park, No.177, Renmin West Road, Jinsha, Kengzi Street, Pingshan District, Shenzhen, Guangdong, China Page 1 of 62 SAR TEST REPORT Product Name: Pocket Linglong Model Number: LL1 FCC ID: 2BVCU-LL1 Issued For : Shanghai firstarpc technology 3rd floor, building 2, No. 200, Zhangheng Road, Free Trade Pilot Zone, Shanghai, China Issued By : Shenzhen LGT Test Service Co., Ltd. Room 205, Building 13, Zone B, Zhenxiong Industrial Park, No.177, Renmin West Road, Jinsha, Kengzi Street, Pingshan District, Shenzhen, Guangdong, China Report Number: LGT26A226HA02 Sample Received Date: Mar. 02, 2026 Date of Test Mar. 03, 2026 ~ Mar. 06, 2026 Date of Issue Mar. 18, 2026 Max. SAR (1g) Body: 1.235 W/kg Reprot No.: LGT26A226HA02 Page 2 of 62 Table of Contents 1. General Information 5 1.1 EUT Description 5 1.2 Test Environment 6 1.3 Test Factory 6 2. Test Standards and Limits 7 3. SAR Measurement System 8 3.1 Definition of Specific Absorption Rate (SAR) 8 3.2 SAR System 8 4. Tissue Simulating Liquids 11 4.1 Simulating Liquids Parameter Check 11 5. SAR System Validation 13 5.1 Validation System 13 5.2 Validation Result 13 6. SAR Evaluation Procedures 14 7. EUT Antenna Location Sketch 15 7.1 SAR test exclusion consider table 16 8. EUT Test Position 19 8.1 Define Two Imaginary Lines on the Handset 19 9. Uncertainty 20 9.1 Measurement Uncertainty 20 9.2 System validation Uncertainty 21 10. Conducted Power Measurement 22 10.1 Test Result 22 10.2 Tune up power 26 11. EUT and Test Setup Photo 28 11.1 EUT Photos 28 11.2 Setup Photos 31 12. SAR Result Summary 34 12.1 Body-worn SAR 34 12.2 Simultaneous Multi-band Transmission Evaluation 36 13. Equipment List 37 Appendix A. System Validation Plots 38 Appendix B. SAR Test Plots 46 Appendix C. Probe Calibration and Dipole Calibration Report 62 Reprot No.: LGT26A226HA02 Page 3 of 62 Revision History Rev. Issue Date Contents 00 Mar. 18, 2026 Initial Issue Reprot No.: LGT26A226HA02 Page 4 of 62 TEST REPORT CERTIFICATION Applicant Shanghai firstarpc technology Address 3rd floor, building 2, No. 200, Zhangheng Road, Free Trade Pilot Zone, Shanghai, China Manufacture Shanghai firstarpc technology Address 3rd floor, building 2, No. 200, Zhangheng Road, Free Trade Pilot Zone, Shanghai, China Product Name Pocket Linglong Trademark Pocket Linglong Model Number LL1 Sample number LGT2602019-3 APPLICABLE STANDARDS STANDARD TEST RESULTS ANSI/IEEE Std. C95.1-2019 FCC 47 CFR Part 2 (2.1093) IEEE 1528: 2013 PASS Prepared by: Approved by: Deng Deng Engineer Vita Li Manager Reprot No.: LGT26A226HA02 Page 5 of 62 1. General Information Environmental evaluation measurements of specific absorption rate (SAR) distributions in emulated human head and body tissues exposed to radio frequency (RF) radiation from wireless portable devices for compliance with the rules and regulations of the U.S. Federal Communications Commission (FCC). 1.1 EUT Description Product Name Pocket Linglong Test Model Number LL1 Series Number N/A Model Difference N/A Device Category Portable Product stage Production unit RF Exposure Environment General Population / Uncontrolled Hardware Version PCB V22 Software Version SW1.25 Frequency Range WLAN 802.11b/g/n20: 2412 MHz ~ 2462 MHz WLAN 802.11n40: 2422 MHz ~ 2452 MHz 802.11a/n20/n40/ac20/ac40/ac80/ac160/ax20/ax40/ax80: 5150 to 5250 MHz 802.11a/n20/n40/ac20/ac40/ac80/ac160/ax20/ax40/ax80/ax160: 5250 to 5350 MHz 802.11a/n20/n40/ac20/ac40/ac80/ac160/ax20/ax40/ax80: 5725 to 5850 MHz Bluetooth: 2402 ~ 2480 MHz Max. Reported SAR(1g): (Limit:1.6W/kg) Test distance: Body:0mm Mode Body Worn(W/kg) 2.4G WLAN ANT1 0.841 2.4G WLAN ANT2 0.191 2.4G WLAN MIMO 0.873 5.2G WLAN ANT1 0.791 5.2G WLAN ANT2 0.184 5.2G WLAN MIMO 1.198 5.3G WLAN ANT1 0.187 5.3G WLAN ANT2 0.613 5.3G WLAN MIMO 1.235 5.8G WLAN ANT1 0.181 5.8G WLAN ANT2 0.57 5.8G WLAN MIMO 1.146 Bluetooth NOTE4 0.037 1-g Sum SAR 1.272 Battery Rated Voltage: 7.4V Capacity: 8000mAh Operating Mode: 2.4G WLAN: 802.11b(DSSS): CCK, DQPSK, DBPSK 802.11g(OFDM): BPSK, QPSK,16-QAM,64-QAM 802.11n(OFDM): BPSK, QPSK,16-QAM,64-QAM 5G WLAN: 802.11a(OFDM): BPSK, QPSK,16-QAM,64-QAM 802.11n(OFDM): BPSK, QPSK,16-QAM,64-QAM 802.11ac (OFDM): BPSK, QPSK,16-QAM,64-QAM,256-QAM Bluetooth: GFSK +π/4DQPSK+8DPSK BLE: GFSK Antenna Specification Bluetooth: PIFA Antenna Reprot No.: LGT26A226HA02 Page 6 of 62 WLAN: PIFA Antenna Operating Mode Maximum continuous output Hotspot Mode Not Support DTM Mode Not Support 1.2 Test Environment Ambient conditions in the SAR laboratory: Items Required Temperature (°C) 18-25 Humidity (%RH) 30-70 1.3 Test Factory Company Name: Shenzhen LGT Test Service Co., Ltd. Address: Room 205, Building 13, Zone B, Zhenxiong Industrial Park, No.177, Renmin West Road, Jinsha, Kengzi Street, Pingshan District, Shenzhen, Guangdong, China Accreditation Certificate FCC Registration No.: 746540 CAB ID: CN0136 Reprot No.: LGT26A226HA02 Page 7 of 62 2. Test Standards and Limits No. Identity Document Title 1 47 CFR Part 2 Frequency Allocations and Radio Treaty Matters; General Rules and Regulations 2 ANSI/IEEE Std. C95.1-2019 IEEE Standard for Safety Levels with Respect to Human Exposure to Electric, Magnetic, and Electromagnetic Fields, 0 Hz to 300 GHz 3 IEEE Std. 1528-2013 Recommended Practice for Determining the Peak Spatial- Average Specific Absorption Rate (SAR) in the Human Head from Wireless Communications Devices: Measurement Techniques 4 FCC KDB 447498 D01 v06 Mobile and Portable Device RF Exposure Procedures and Equipment Authorization Policies 5 FCC KDB 865664 D01 v01r04 SAR Measurement 100 MHz to 6 GHz 6 FCC KDB 865664 D02 v01r02 RF Exposure Reporting 7 FCC …

Text truncated - open the document above for the full version.

Kunshan Innowave Communication Technology Co.,Ltd. Product Specification Product Name ： SixUnited Customer Name ： JJ09-Main-Finished antenna Customer Number ： XXXXXXXXXX INNOWAVE Number ： F211J0912191000 Version Number ： T02 ApproveReviewPreparation Xudong.zhangBo.liChenglong.yan 2026.1.202026.1.202026.1.20 Add: Building H, No. 55, Shengchuang Road, Yushan Town, Kunshan City, Jiangsu Province, China Antenna Type: PIFA Antenna KunshanInnowaveCommunicationTechnologyCo.,Ltd. 1.AntennaSpecification AntennaTypeWLANAntenna Frequency2400MHz~2500MHz5150MHz~5850MHz VSWR3.0Max Impedance50Ω PolarizationLinear RadiationpatternOmni-directional Dimension20.56*25.17*0.15 Connector KangshuoConnector I CableTypeWLANMain0.81LL，L=45mm，Black Operating Temperature -20~65°C Storage temperature -20~85°C 2.AntennaPhotos KunshanInnowaveCommunicationTechnologyCo.,Ltd. 4.AntennaS11 （ VSWR/Returnloss ） ReturnlossTest：E5071BNetworkAnalyzer→50ΩCable→Antenna KunshanInnowaveCommunicationTechnologyCo.,Ltd. 5.AntennaEfficiency & Gain KunshanInnowaveCommunicationTechnologyCo.,Ltd. 5250MHz 5750MHz 2440MHz

The test report is effective only with both signature and specialized stamp. This report shall not be reproduced except in full without the written approval of the Laboratory. The results in this report only apply to the tested sample. Shenzhen LGT Test Service Co., Ltd. Tel: 0755-89668180 E-mail:[email protected] Web: www.lgt-cert.com Room 205, Building 13, Zone B, Zhenxiong Industrial Park, No.177, Renmin West Road, Jinsha, Kengzi Street, Pingshan District, Shenzhen, Guangdong, China Page 1 of 73 RF TEST REPORT Product Name: Pocket Linglong Model Number: LL1 FCC ID: 2BVCU-LL1 Issued For : Shanghai firstarpc technology 3rd floor, building 2, No. 200, Zhangheng Road, Free Trade Pilot Zone, Shanghai, China Issued By : Shenzhen LGT Test Service Co., Ltd. Room 205, Building 13, Zone B, Zhenxiong Industrial Park, No.177, Renmin West Road, Jinsha, Kengzi Street, Pingshan District, Shenzhen, Guangdong, China Report Number: LGT26A226RF07 Sample Received Date: Jan. 31, 2026 Date of Test: Jan. 31, 2026 ~ Mar. 13, 2026 Date of Issue: Mar. 13, 2026 Report No.: LGT26A226RF07 Page 2 of 73 TEST REPORT CERTIFICATION Applicant: Shanghai firstarpc technology Address: 3rd floor, building 2, No. 200, Zhangheng Road, Free Trade Pilot Zone, Shanghai, China Manufacturer: Shanghai firstarpc technology Address: 3rd floor, building 2, No. 200, Zhangheng Road, Free Trade Pilot Zone, Shanghai, China Product Name: Pocket Linglong Trademark: Pocket Linglong Model Number: LL1 Sample Status: Normal APPLICABLE STANDARDS STANDARD TEST RESULTS FCC Part 15.247, Subpart C ANSI C63.10-2020 PASS Prepared by: Approved by: Zane Shan Vita Li Engineer Technical Director Report No.: LGT26A226RF07 Page 3 of 73 Table of Contents Page 1. SUMMARY OF TEST RESULTS 6 1.1 TEST LABORATORY 7 1.2 MEASUREMENT UNCERTAINTY 7 2. GENERAL INFORMATION 8 2.1 GENERAL DESCRIPTION OF THE EUT 8 2.2 DESCRIPTION OF THE TEST MODES 10 2.3 FREQUENCY HOPPING SYSTEM REQUIREMENTS 10 2.4 TABLE OF PARAMETERS OF TEST SOFTWARE SETTING 12 2.5 DESCRIPTION OF NECESSARY ACCESSORIES AND SUPPORT UNITS 12 2.6 EQUIPMENTS LIST 13 3. EMC EMISSION TEST 15 3.1 CONDUCTED EMISSION MEASUREMENT 15 3.2 RADIATED EMISSION MEASUREMENT 19 4. CONDUCTED SPURIOUS & BAND EDGE EMISSION 30 4.1 LIMIT 30 4.2 TEST PROCEDURE 30 4.3 TEST SETUP 30 4.4 EUT OPERATION CONDITIONS 31 4.5 TEST RESULTS 31 5. NUMBER OF HOPPING CHANNEL 32 5.1 LIMIT 32 5.2 TEST PROCEDURE 32 5.3 TEST SETUP 32 5.4 EUT OPERATION CONDITIONS 32 5.5 TEST RESULTS 32 6. AVERAGE TIME OF OCCUPANCY 33 6.1 LIMIT 33 6.2 TEST PROCEDURE 33 6.3 TEST SETUP 33 6.4 EUT OPERATION CONDITIONS 33 6.5 TEST RESULTS 33 7. HOPPING CHANNEL SEPARATION MEASUREMEN 34 7.1 LIMIT 34 7.2 TEST PROCEDURE 34 Report No.: LGT26A226RF07 Page 4 of 73 7.3 TEST SETUP 34 7.4 EUT OPERATION CONDITIONS 34 7.5 TEST RESULTS 34 8. BANDWIDTH TEST 35 8.1 LIMIT 35 8.2 TEST PROCEDURE 35 8.3 TEST SETUP 35 8.4 EUT OPERATION CONDITIONS 35 8.5 TEST RESULTS 35 9. OUTPUT POWER TEST 36 9.1 LIMIT 36 9.2 TEST PROCEDURE 36 9.3 TEST SETUP 36 9.4 EUT OPERATION CONDITIONS 36 9.5 TEST RESULTS 36 10. ANTENNA REQUIREMENT 37 10.1 STANDARD REQUIREMENT 37 10.2 EUT ANTENNA 37 APPENDIX I - TEST RESULTS 38 1. DUTY CYCLE 38 2. BANDWIDTH 42 3. MAXIMUM CONDUCTED OUTPUT POWER 49 4. CARRIER FREQUENCY SEPARATION 53 5. NUMBER OF HOPPING FREQUENCIES 55 6. TIME OF OCCUPANCY (DWELL TIME) 57 7. UNWANTED EMISSIONS IN NON-RESTRICTED FREQUENCY BANDS 60 APPENDIX II - MEASUREMENT PHOTOS 73 Report No.: LGT26A226RF07 Page 5 of 73 Revision History Rev. Issue Date Revisions 00 Mar. 13, 2026 Initial Issue Report No.: LGT26A226RF07 Page 6 of 73 1. SUMMARY OF TEST RESULTS Test procedures according to the technical standards: KDB 558074 D01 15.247 Meas Guidance v05r02. FCC Part 15.247, Subpart C Standard Section Test Item Judgment Remark 15.207 Conducted Emission PASS -- 15.247(a)(1) Hopping Channel Separation PASS -- 15.247(a)(1)&(b)(1) Output Power PASS -- 15.209 Radiated Spurious Emission PASS -- 15.247(d) Conducted Spurious & Band Edge Emission PASS -- 15.247(a)(1)(iii) Number of Hopping Frequency PASS -- 15.247(a)(1)(iii) Dwell Time PASS -- 15.247(a)(1) Bandwidth PASS -- 15.205 Restricted bands of operation PASS -- Part 15.247(d)/part 15.209(a) Band Edge Emission PASS -- 15.203 Antenna Requirement PASS -- NOTE: (1) ‘N/A’ denotes test is not applicable in this Test Report. (2) All tests are according to ANSI C63.10-2020. Report No.: LGT26A226RF07 Page 7 of 73 1.1 TEST LABORATORY Company Name: Shenzhen LGT Test Service Co., Ltd. Address: Room 205, Building 13, Zone B, Zhenxiong Industrial Park, No.177, Renmin West Road, Jinsha, Kengzi Street, Pingshan District, Shenzhen, Guangdong, China Accreditation Certificate: FCC Registration No.: 746540 CAB ID: CN0136 1.2 MEASUREMENT UNCERTAINTY The reported unc…

Text truncated - open the document above for the full version.