2BVD5-SENSOR001Motion Capture Sensor Kit

Guangzhou Elecholic Technology Co.,Ltd

Application Details

Equipment Class: DTS - Digital Transmission System
Date of Grant: Mar 25, 2026
Application Purpose: Original Equipment
Equipment Note: Motion Capture Sensor Kit
Frequency Range: 2402.00000000 - 2480.00000000
Company: Guangzhou Elecholic Technology Co.,Ltd
Country: China

Documents & Files

Select a file to view

Document Text

Text extracted from the exhibit documents filed with the FCC. Open a document above to read the original.

Attestation Statements

GuangzhouElecholicTechnologyCo.,Ltd Address ： 84-6f35thBuilding,WushanRoadNo.381,TianheDistrict, Guangzhou FRN:0038207320 Date:2026-03-25 FederalCommunicationsCommission AuthorizationandEvaluationDivision 7435OaklandMillsRoad Columbia,MD21046 Ref:AttestationStatementsPart2.911(d)(7)Filing SUBJECT:FCCApplicationforFCCID:2BVD5-SENSOR001 GuangzhouElecholicTechnologyCo.,Ltdcertifiesthat,asofthedateofthefilingofthe application,XINNAISIINCisourdesignatedU.S.agentforserviceofprocessfortheabove referencedFCCID.GuangzhouShehdsStageLightingEquipmentco.,LTD.acceptsto maintainanagentfornolessthanoneyearafterthegranteehasterminatedallmarketing andimportationortheconclusionofanyCommission-relatedproceedinginvolvingthe equipment. XINNAISIINCaccepts,asofthedateofthefilingoftheapplication,theobligationofthe designatedU.S.agentforserviceofprocessfortheabovereferencedFCCID. DesignatedU.S.AgentInformation: Name:XINNAISIINC Address:1500NGRANTSTSTER,DENVER,CO80203 FRN:0037518289 ContactPerson:KiKi Tel.:+01(951)893-3011 Email:[email protected] Sincerely, SignedonbehalfofGuangzhouElecholic TechnologyCo.,Ltd SignedonbehalfofXINNAISIINC Name:Name: Title:ManagerTitle:Manager Date:2026-03-25Date:2026-03-25

Attestation Statements

Rev9/15/2025 GuangzhouElecholicTechnologyCo.,Ltd FederalCommunicationsCommission AuthorizationandEvaluationDivision 7435OaklandMillsRoad Columbia,MD21046 USA Date:March24,2026 Ref:AttestationStatementsPart2.911(d)(5)(i)Filing FCCID:2BVD5-SENSOR001 GuangzhouElecholicTechnologyCo.,Ltdcertifiesthattheequipmentforwhichauthorizationissoughtis not“covered”equipmentprohibitedfromreceivinganequipmentauthorizationpursuanttosection 2.903oftheFCCrules. GuangzhouElecholicTechnologyCo.,Ltdcertifiesthattheequipmentforwhichauthorizationissought doesnotincludecybersecurityoranti-virussoftwareproducedorprovidedbyKasperskyLab,Inc.orany ofitssuccessorsandassignees,includingequipmentwithintegratedKasperskyLab,Inc.(oranyofits successorsandassignees)cybersecurityoranti-virussoftwarepursuanttoDA-24-886andKDB986446 D01CoveredEquipmentGuidancesectionB(2a). █Deviceisinherentlycompliantbasedonhardwarelimitationsorsoftwarecontrols. or ASoftwareBillofMaterials(SBOM)isprovidedtotheTCBforreview,and Theend-userorthirdpartiescannotinstalladditionalsoftwareonthisdevice. Sincerely, XIAOLU GuangzhouElecholicTechnologyCo.,Ltd NINGBOHAISHUDIBIAUDIOCO.,LTD Rev9/15/2025 FederalCommunicationsCommission AuthorizationandEvaluationDivision 7435OaklandMillsRoad Columbia,MD21046 USA Date:March24,2026 Ref:AttestationStatementsPart2.911(d)(5)(ii)Filing FCCID:2BVD5-SENSOR001 GuangzhouElecholicTechnologyCo.,Ltdcertifiesthat,asofthedateofthefilingoftheapplication,the applicantisnotidentifiedontheCoveredList(asaspecificallynamedentityoranyofitssubsidiariesor affiliates)asanentityproducing“covered”equipment. Sincerely, XIAOLU GuangzhouElecholicTechnologyCo.,Ltd

Cover Letter(s)

GuangzhouElecholicTechnologyCo.,Ltd Date：Mar25,2026 ProductModelNumber:MotionCaptureSensorKit/SENSOR001 FCCID：2BVD5-SENSOR001 Towhomitmayconcern, Re:ProductCertificationRepresentativeAuthorizationLetter WeauthorizeQAILaboratoriesLtd.3980NorthFraserWay,BurnabyB.C. CanadaV5J5K5toactonourbehalfonallmattersconcerningtheabove namedequipment. Thisshallincludethefollowing: Testing Approvalapplicationsandprocedures WedeclarethatQAILaboratoriesLtd.isallowedtoforwardallinformation relatedtotheapprovalprojecttotheappliedcertificationbodyandtothe notificationentitiesandtodiscussanyissuesconcerningtheapproval application.AnyandallactscarriedoutbyQAILaboratoriesLtd.onour behalfshallhavethesameeffectasactsofourown. By: ContactListedonFCCWesbite Title:XIAOLU Email:[email protected] Telephone:18122050790 Onbehalfof:GuangzhouElecholicTechnologyCo.,Ltd

Cover Letter(s)

GuangzhouElecholicTechnologyCo.,Ltd OfficeofEngineeringTechnology FederalCommunicationsCommission 7435OaklandMillsRoad Columbia,MD21046 USA Date:March25,2026 Subject;RequestforConfidentiality FCCID:2BVD5-SENSOR001 ToWhomItMayConcern, PursuanttotheprovisionsoftheCommission’srulesTitle47Sections§0.457and§0.459,we arerequestingtheCommissiontowithholdthefollowingattachment(s)asconfidential documentsfrompublicdisclosureindefinitely. Thesedocumentscontaindetailedsystemandequipmentdescriptionsandareconsideredas proprietaryinformationinoperationoftheequipment.Thepublicdisclosureofthese documentsmightbeharmfultoourcompanyandwouldgivecompetitorsanunfairadvantage inthemarket. █SchematicDiagram █BlockDiagram PartsList █OperationalDescription Tune-upProcedure SoftwareSecurityRequirementsforUNIIdevices Inadditionaltoabovementioneddocuments,inordertocomplywiththemarketingregulations inTitle47CFR§2.803andtheimportationrulesinTitle47CFR§2.1204,whileensuringthat businesssensitiveinformationremainsconfidentialuntiltheactualmarketingofnewly authorizeddevices,werequestShortTermConfidentialityofthefollowingattachment(s); █ExternalPhotos █TestSetupPhotos █InternalPhotos █UserManual █For45days,pursuanttoPublicNoticeDA04-1705. OR For180dayspursuanttoKDB726920D01. Itisourunderstandingthatallmeasurementtestreports,FCCIDlabelformatand correspondenceduringthecertificationreviewprocesscannotbegrantedasconfidential documentsandthisinformationwillbeavailableforpublicreviewoncethegrantofequipment authorizationisissued. Sincerely, Signature: Name:XIAOLU Title:Manager

ID Label/Location Info

FCCID:2BVD5-SENSOR001 FCCLabelSample FCCLabelSpecifications TextisBlackincolorandisjustified.Labelsareprintedinindelibleinkonpermanent adhesivebackingorsilk-screenedontotheEUTorshallbeaffixedataconspicuouslocation ontheEUT.WheretheEUTisconstructedintwoormoresectionsconnectedbywiresand marketedtogether,theabovestatementisrequiredtobeaffixedonlytothemaincontrol unit.WhentheEUTissosmallorforsuchusethatitisnotpracticabletoplacethestatement onit,theaboveinformationshallbeplacedinaprominentlocationintheinstructionmanual orpamphletsuppliedtotheuseror,alternatively,shallbeplacedonthecontainerinwhich thedeviceismarketed. FCCLabelLocation Size:8mm*4mm LabelLocation FCCID:2BVD5-SENSOR001

RF Exposure Info

FCCID:2BVD5-SENSOR001 RFExposureEvaluation AccordingtoKDB447498D01GeneralRFExposureGuidancev06andpart2.1093，Unlessspecifically requiredbythepublishedRFexposureKDBprocedures,standalone1-gheadorbodyand10-g extremitySARevaluationforgeneralpopulationexposureconditions,bymeasurementornumerical simulation,isnotrequiredwhenthecorrespondingSARTestExclusionThresholdcondition(s),listed below,is(are)satisfied. For100MHzto6GHzandtestseparationdistances≤50mm,the1-gand10-gSARtestexclusion thresholdsaredeterminedbythefollowing: [(max.powerofchannel,includingtune-uptolerance,mW)/(min.testseparationdistance, mm)]·[√f(GHz)]≤3.0for1-gSAR,and≤7.5for10-gextremitySAR,where f(GHz)istheRFchanneltransmitfrequencyinGHz PoweranddistanceareroundedtothenearestmWandmmbeforecalculation Theresultisroundedtoonedecimalplaceforcomparison Here, ThedevicehasbeenevaluatedtomeetgeneralRFexposurerequirement.Thedevicecanbeusedin portableexposureconditionwithoutrestriction. ForBLE Max Conducted Power(dBm) Tune-up Power(dBm) Max Tune-up Power(dBm) Max Power(W)Frequency(MHz) Min. distance(mm) Calc. thresholds limit 1.091.09(±1)2.090.00161824025 0.501552 3.0 SoaSARtestisnotrequired

Test Report

Approval sheet Page 1 of 9 ASC_RFANT3216120A5T_V05 Apr. 2010 MULTILAYER CERAMIC ANTENNA RFANT Series – RoHS Compliance 2.4 GHz ISM Band Working Frequency P/N: RFANT3216120A5T Series Antenna typeChip Antenna *Contents in this sheet are subject to change without prior notice. Manufacturer Address566-1Kao-shi Road Yang-MeiTao- Yuan32642TaiwanR.O.C. Approval sheet Page 2 of 9 ASC_RFANT3216120A5T_V05 Apr. 2010 FEATURES 1. Surface Mounted Devices with a small dimension of 3.2 X 1.6 X1.2 mm 3 meet future miniaturization trend. 2. LTCC process 3. High stability in Temperature / Humidity Change APPLICATIONS 1. 2.4GHz ISM band RF applications 2. Bluetooth, Wireless, HomeRF CONSTRUCTION DIMENSIONS Figure Symbol Dimension (mm) L 3.20 ± 0.20 W 1.60 ± 0.10 T 1.20 ± 0.10 a 0.25 ± 0.15 1. Feeding 2. Identification Mark 3. Soldering terminal W T E a a Approval sheet Page 3 of 9 ASC_RFANT3216120A5T_V05 Apr. 2010 Ground Soldering Pad 50 ΩTransmission Line Unit : mm 19.4 Empty Area 6x6 mm 50Ω ΩΩ ΩFeed line 45mm 20mm Series 1 Series 2 Ground Soldering Pad 50 ΩTransmission Line Unit : mm 19.4 Empty Area 6x6 mm 50Ω ΩΩ ΩFeed line 45mm 20mm Series 1 Series 2 ELECTRICAL CHARACTERISTICS RFANT3216120A5T Specification Working Frequency Range 2450 ± 50 MHz Fc (GHz) 2.9 Gain (dBi) 2 (Typical) VSWR 2 max. Series 1 6.8nH Matching component value Series 2 - Operation Temperature -40 ̊C ~ +85 ̊C * This frequency must be adjusted to 2.45GHz with matching circuit. SOLDER LAND PATTERN DESIGN Figure 1.66 0.8 2.3 1.63 6 3.43 1.6 6 1.36 0.36 0.88 0.34 1.88 1.83 0.8 0.54 1.66 0.8 2.3 1.63 6 3.43 1.6 6 1.36 0.36 0.88 0.34 1.88 1.83 0.8 0.54 Approval sheet Page 4 of 9 ASC_RFANT3216120A5T_V05 Apr. 2010 Antenna on Test Board ( Thickness 1.2mm) Antenna S11 on Test Board Antenna VSWR on Test Board E 0.8mm 1.6mm 19.4mm Empty Area 6x6 mm 50Ω ΩΩ ΩFeed line 1.66mm GROUND 0.8mm 1.6mm 19.4mm Empty Area 6x6 mm 50Ω ΩΩ ΩFeed line 1.66mm GROUND 0.8mm 1.6mm 19.4mm Empty Area 6x6 mm 50Ω ΩΩ ΩFeed line 1.66mm GROUND 0.8mm 1.6mm 19.4mm Empty Area 6x6 mm 50Ω ΩΩ ΩFeed line 1.66mm GROUND E Approval sheet Page 5 of 9 ASC_RFANT3216120A5T_V05 Apr. 2010 RADIATION PATTERN Radiation Pattern and Gain were dependent on measurement board design. The specification of RFANT3216120A5T antenna was measured based on the PCB size and installation position as shown in the below figure Test Board Vertical Horizontal Y - Z Plane Average Gain= 0.891 dBi Peak Gain = 2.12dBi Average Gain = 0.64 dBi Peak Gain= -6.07dBi Average Gain=-11.62dBi X - Z Plane Average Gain= -1.846 dBi Peak Gain= -7.78 dBi Average Gain= -11.97dBi Peak Gain= 0.96 dBi Average Gain= -2.29 dBi X - Y Plane Average Gain= -2.556 dBi Peak Gain= -9.41 dBi Average Gain= -15.54dBi Peak Gain= 1.40 dBi Average Gain= -2.78 dBi GROUND X Y Z GROUND X Y Z X Y Z Approval sheet Page 6 of 9 ASC_RFANT3216120A5T_V05 Apr. 2010 RELIABILITY TEST Test item Test condition / Test method Specification Solderability JIS C 0050-4.6 JESD22-B102D *Solder bath temperature：235 ± 5°C *Immersion time：2 ± 0.5 sec *Solder：Sn3Ag0.5Cu for lead-free At least 95% of a surface of each terminal electrode must be covered by fresh solder. Leaching (Resistance to dissolution of metallization) IEC 60068-2-58 *Solder bath temperature：260 ± 5°C *Leaching immersion time：30 ± 0.5 sec *Solder : SN63A Loss of metallization on the edges of each electrode shall not exceed 25%. Resistance to soldering heat JIS C 0050-5.4 *Preheating temperature：120~150°C, 1 minute. *Solder temperature：270±5°C *Immersion time：10±1 sec *Solder：Sn3Ag0.5Cu for lead-free Measurement to be made after keeping at room temperature for 24±2 hrs No mechanical damage. Samples shall satisfy electrical specification after test. Loss of metallization on the edges of each electrode shall not exceed 25%. Drop Test JIS C 0044 *Height：75 cm *Test Surface：Rigid surface of concrete or steel. *Times：6 surfaces for each units；2 times for each side. No mechanical damage. Samples shall satisfy electrical specification after test. Adhesive Strength of Termination JIS C 0051- 7.4.3 *Pressurizing force： 5N(≦0603)；10N(>0603) *Test time：10±1 sec No remarkable damage or removal of the termination. Bending test JIS C 0051- 7.4.1 The middle part of substrate shall be pressurized by means of the pressurizing rod at a rate of about 1 mm/s per second until the deflection becomes 1mm/s and then pressure shall be maintained for 5±1 sec. Measurement to be made after keeping at room temperature for 24±2 hours No mechanical damage. Samples shall satisfy electrical specification after test. Approval sheet Page 7 of 9 ASC_RFANT3216120A5T_V05 Apr. 2010 Temperature cycle JIS C 0025 1. 30±3 minutes at -40°C±3°C, 2. 10~15 minutes at room temperature, 3. 30±3 minutes at +85°C±3°C, 4. 10~15 minutes at room temperature, Total 100 continuous cycles Measurement to be made after keeping at room temperature for 24±2 hrs No mechanical damage. Samples shall satisfy electrical specification after test. Vibration JIS C 0040 *Frequency：10Hz~55Hz~10Hz(1min) *Total amplitude：1.5mm *Test times：6hrs.(Two hrs each in three mutually perpendicular directions) No mechanical damage. Samples shall satisfy electrical specification after test. High temperature JIS C 0021 *Temperature：85°C±2°C *Test duration：1000+24/-0 hours Measurement to be made after keeping at room temperature for 24±2 hrs No mechanical damage. Samples shall satisfy electrical specification after test. Humidity (steady conditions) JIS C 0022 *Humidity：90% to 95% R.H. *Temperature：40±2°C *Time：1000+24/-0 hrs. Measurement to be made after keeping at room temperature for 24±2 hrs ※ 500hrs measuring the first data then 1000hrs data No mechanical damage. Samples shall satisfy electrical specification after test. Low temperature JIS C 0020 *Temperature：-40°C±2°C *Test duration：1000+24/-0 hours Measurement to be made after keeping at room temperature for 24±2 hrs No mechanical damage. Samples shall satisfy electrical specification after test. Approval sheet Page 8 of 9 ASC_RFANT…

Text truncated - open the document above for the full version.

Test Report

-Page 1 of 39 -ReportNo.:HB20260225002E-01 Add:Room102,201,Building2,YuanwangguRFIDIndustrialPark,TongguanRoad,TianliaoCommunity,YutangStreet,GuangmingDistrict,Shenzhen,China Tel:(86-755)29989321Fax:(86-755)29985110Web:www.sz-hongbiao.com TestReport Product: MotionCaptureSensorKit TradeMark: N/A ModelNumber: SENSOR001 FCCID: 2BVD5-SENSOR001 Preparedfor GuangzhouElecholicTechnologyCo.,Ltd 84-6f35thBuilding,WushanRoadNo.381,TianheDistrict, Guangzhou Preparedby ShenzhenHongBiaoCertification&TestingCo.,Ltd. Room102,201,Building2,YuanwangguRFIDIndustrialPark,Tongguan Road,TianliaoCommunity,YutangStreet,GuangmingDistrict,Shenzhen, China Tel.:+86-755-29989321Fax.:+86-755-29985110 Website:http://www.sz-hongbiao.com -Page 2 of 39 -ReportNo.:HB20260225002E-01 Add:Room102,201,Building2,YuanwangguRFIDIndustrialPark,TongguanRoad,TianliaoCommunity,YutangStreet,GuangmingDistrict,Shenzhen,China Tel:(86-755)29989321Fax:(86-755)29985110Web:www.sz-hongbiao.com TableofContents 1GENERALDESCRIPTION........................................................................................................................................6 1.1DESCRIPTIONOFEUT.................................................................................................................................................6 1.2TESTMODE...............................................................................................................................................................6 1.3OPERATIONCHANNELLIST...........................................................................................................................................7 1.4TESTSETUP...............................................................................................................................................................7 1.5POWERSETTINGCONFIGURATIONPARAMETERS................................................................................................................7 1.6ANCILLARYEQUIPMENT...............................................................................................................................................7 2SUMMARYOFTESTRESULT..................................................................................................................................8 3TESTFACILITIESANDACCREDITATIONS................................................................................................................9 3.1TESTLABORATORY......................................................................................................................................................9 3.2ENVIRONMENTALCONDITIONS......................................................................................................................................9 3.3MEASUREMENTUNCERTAINTY......................................................................................................................................9 3.4TESTSOFTWARE.......................................................................................................................................................10 4LISTOFTESTEQUIPMENT...................................................................................................................................11 5TESTITEMANDRESULTS....................................................................................................................................13 5.1ANTENNAREQUIREMENT...........................................................................................................................................13 5.1.1StandardRequirement..............................................................................................................................13 5.1.2TestResult..................................................................................................................................................13 5.2CONDUCTEDEMISSION..............................................................................................................................................14 5.2.1Limits..........................................................................................................................................................14 5.2.2TestProcedures..........................................................................................................................................14 5.2.3TestSetup...................................................................................................................................................15 5.2.4TestResult..................................................................................................................................................15 5.3RADIATEDEMISSION.................................................................................................................................................18 5.3.1Limits..........................................................................................................................................................18 5.3.2TestProcedures..........................................................................................................................................18 5.3.3TestSetup...................................................................................................................................................18 5.3.4TestResult..................................................................................................................................................19 5.3.5BandEdge-Radiated................................................................................................................................23 5.3.6Spuriousemissioninrestrictedband1000MHz-25000MHz....................................................................24 5.4PEAKOUTPUTPOWER..............................................................................................................................................25 5.4.1Limit.....................................…

Text truncated - open the document above for the full version.