2BVDB-SPE-S-ATSPE Sensor

Page 1 of 3 SOLARSHINGLE SOLUTION (SG) PTE. LTD. www.sgss.com.sg v20260331 SPE-S-AT User Guide This sensor, SPE-S-AT, can be connected to the DC power supply device under test to obtain voltage, current and ambient temperature parameters. It can transmit the measurement data to a mobile App or cloud server via Bluetooth (BLE) to achieve remote measurement funcƟonality. The sensor has 4 external connecƟon wires: +IN --- Connect to the posiƟve (+) terminal of the device under test, power input. -IN --- Connect to the negaƟve (-) terminal of the device under test, power input. User opƟonal: +OUT --- Connect to the posiƟve terminal of the other device, power output. -OUT --- Connect to the negaƟve terminal of the other device, power output. Page 2 of 3 SOLARSHINGLE SOLUTION (SG) PTE. LTD. www.sgss.com.sg v20260331 Specifaction ： Model: SPE-S-AT Measurement range: 6.0 ~ 24.0 V DC, 0 ~ 20A DC, 0 ~ +70 °C Primary comms: Bluetooth Low Energy @ 2.4 GHz Max. power consumption: 80 mW Fuse rating: 100 mA Enclosure: UV-stable polycarbonate, and waterproof level of NEMA Type 4, 4X Dimensions: ~ 134 × 34 × 18.5 mm (connection wires not included) Operating temp: −25 °C to +70 °C Humidity : 0–80% RH non-condensing FCC ID : 2BVDB-SPE-S-AT Page 3 of 3 SOLARSHINGLE SOLUTION (SG) PTE. LTD. www.sgss.com.sg v20260331 FCC ID : 2BVDB-SPE-S-AT FCC Statement NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC RF Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment shall be installed and operated with minimum distance 20cm between the radiator & body.

2.911 (d)(7)USA Agent v1.2 Section 2.911(d)(7) USA Agent for Service of Process Company name: SOLARSHINGLE SOLUTION (SG) PTE. LTD. Address: 190 Clemenceau Avenue #06-08 Singapore 239924, Singapore FCC ID: 2BVDB-SPE-S-AT Date: Apr. 01, 2026 2.911(d)(7) USA Designated Agent for Service of Process We, [SOLARSHINGLE SOLUTION (SG) PTE. LTD.] (“the applicant”) designate [Wedo Group] NOTE1 for the purpose of accepting service of process on behalf of the applicant. Applicant consent: We Acknowledge our consent to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and email address of the designated agent and acknowledge our acceptance of our obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. Agent obligation: We Acknowledge our obligation to accept service of process in the United States for matters related to the applicable equipment at our physical U.S. address and email address for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. USA Agent Company name: Wedo Group Address: 710 Arabian Ln Walnut, CA 91789, United States FRN：0037730611 Contact Name: Jeffrey Chen Telephone No: (323) 528-1888 Email: [email protected] Applicant Company name: SOLARSHINGLE SOLUTION (SG) PTE. LTD. Address: 190 Clemenceau Avenue #06-08 Singapore 239924, Singapore FRN: 0038202073 Contact Name: Lihui Guo Telephone No: +65 93391554 Email: [email protected] Signature: Signature:

SOLARSHINGLE SOLUTION (SG) PTE. LTD. 190 Clemenceau Avenue #06-08 Singapore 239924, Singapore Attestation Statements Not Covered Entity Applicant & Not Covered Equipment To: Federal Communications Commission Date: Apr. 01, 2026 7435 Oakland Mills Road, Columbia, MD 21046, USA Ref: Information Required by Section 2.911(d)(5)(i) & (ii) FCC ID: 2BVDB-SPE-S-AT FRN: 0038202073 SOLARSHINGLE SOLUTION (SG) PTE. LTD. (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List, established pursuant to § 1.50002 of reference chapter, as an entity producing “covered” communication equipment. The equipment for which authorization is sought is not “covered” telecommunications equipment and video surveillance equipment produced by entities identified on the Commission’s Covered List that prohibited from receiving an equipment authorization pursuant to section § 2.903 of the FCC rules. Sincerely yours, Applicant Signature Printed Name: Lihui Guo Title: Manager Address: 190 Clemenceau Avenue #06-08 Singapore 239924, Singapore Tel.: +65 93391554 Email: [email protected]

SOLARSHINGLE SOLUTION (SG) PTE. LTD. 190 Clemenceau Avenue #06-08 Singapore 239924, Singapore 1 | Page Attestation Statements To: Federal Communications Commission Date: Apr. 01, 2026 7435 Oakland Mills Road, Columbia, MD 21046, USA Subject: Attestation of Compliance with FCC Covered List Software Requirements FCC ID: 2BVDB-SPE-S-AT Product Name: SPE Sensor This letter serves as an attestation that the equipment identified above ☐ is / ☒ is not (select one) "covered" software as defined under the Federal Communications Commission (FCC) Covered List requirements, as outlined in FCC 22-84 and KDB 986446. Specifically, the undersigned certifies that the equipment for which authorization is sought: 1. Does not contain cybersecurity or anti-virus software produced or provided by Kaspersky Lab, Inc. or any of its successors, assignees, parents, subsidiaries, affiliates, or any entity that has rebranded or relabeled software produced by the aforementioned entities. 2. Does not have the capability to store, run, or deliver any software identified on the FCC Covered List, including but not limited to cybersecurity and anti-virus software. To support this attestation, the appendix evaluation documentation has been prepared and is included in the certification filing. This attestation is based on a thorough evaluation of the device's design, functionality, and software environment. The undersigned affirms that the information provided is accurate and complete to the best of their knowledge. Sincerely yours, Applicant Signature Printed Name: Lihui Guo Title: Manager Address: 190 Clemenceau Avenue #06-08 Singapore 239924, Singapore Tel.: +65 93391554 Email: [email protected] SOLARSHINGLE SOLUTION (SG) PTE. LTD. 190 Clemenceau Avenue #06-08 Singapore 239924, Singapore 2 | Page Evaluation regarding to the Covered List Software: Compliance Methodology Evaluation Process Results Device is Inherent compliance ☒ The Chipset(s) used is limited to run the Cybersecurity or anti-virus software. Compliance ☒ The Memory used is limited to run the Cybersecurity or anti-virus software. Compliance ☒ There is storage capacity limitation for store or install the Cybersecurity or anti-virus software. Compliance ☒ Operating system used is limited to run, install or deliver the Cybersecurity or anti-virus software. Compliance Device is not Inherent compliance ☐ Evaluation Based on Software Bill of Materials (SBoM) See attached “SBoM“ Note:The SBoM content is limited to the scope of covered list software (e.g. antivirus and cybersecurity software). ☐ Evaluation Based on Scan for Software on the device ☐ Evaluation Based on Filesystem scan ☐ Evaluation Based on Running software check SBOM (Software Bill of Materials) [For Device is not Inherent compliance] Section Component Name Version Supplier 1 2 3

SOLARSHINGLE SOLUTION (SG) PTE. LTD. 190 Clemenceau Avenue #06-08 Singapore 239924, Singapore Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: Apr. 01, 2026 Subject; Request for Confidentiality FCC ID: 2BVDB-SPE-S-AT To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Operational Description Parts List In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s); External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: Lihui Guo Title: Manager

SOLARSHINGLE SOLUTION (SG) PTE. LTD. 190 Clemenceau Avenue #06-08 Singapore 239924, Singapore Apr. 01, 2026 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Agent Authorization for FCC ID: 2BVDB-SPE-S-AT I, the undersigned, hereby authorize (Attestation of Global Compliance (Shenzhen) Co., Ltd) to act on our behalf in all matters relating to this application for equipment certification. Any act carried out by (Attestation of Global Compliance (Shenzhen) Co., Ltd) shall have the same effect as our own and I acknowledge that all responsibility for complying with the terms and conditions of certification, as specified by DERYCOM CERTIFICATION SERVICES, INC., still resides with (SOLARSHINGLE SOLUTION (SG) PTE. LTD.). We certify that we are not subject to a denial of federal benefits that includes FCC benefits pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. §862, and that no party to the application, as defined in 47 CFR §1.2002(b), is subject to a denial of federal benefits that includes FCC benefits pursuant to that section. Sincerely, (Signature) Printed Name: Lihui Guo Title: Manager Tel.: +65 93391554 Email: [email protected]

Report No.: AGC06164260303AP02 Page 1 of 4 EXTERNAL PHOTOS TOP VIEW OF EUT BOTTOM VIEW OF EUT Report No.: AGC06164260303AP02 Page 2 of 4 FRONT VIEW OF EUT BACK VIEW OF EUT Report No.: AGC06164260303AP02 Page 3 of 4 LEFT VIEW OF EUT RIGHT VIEW OF EUT Report No.: AGC06164260303AP02 Page 4 of 4 PORT VIEW-1 OF EUT PORT VIEW-2 OF EUT ****************************************End of Report*************************************

FCC ID Label Location FCC ID: 2BVDB-SPE-S-AT 10mm*10mm

Report No.: AGC06164260303AP02 Page 1 of 2 INTERNAL PHOTOS Open view of EUT Internal view-1 of EUT Report No.: AGC06164260303AP02 Page 2 of 2 Internal view-2 of EUT Internal view-3 of EUT ****************************************End of Report************************************* BT Antenna

Page 1 of 10 RF Exposure Report Report No.: AGC06164260303FH01 FCC ID : 2BVDB-SPE-S-AT APPLICATION PURPOSE : Original Equipment PRODUCT DESIGNATION : SPE Sensor BRAND NAME : SPE MODEL NAME : SPE-S-AT APPLICANT : SOLARSHINGLE SOLUTION (SG) PTE. LTD. DATE OF ISSUE : Apr. 01, 2026 STANDARD(S) : FCC Part 2 Subpart J §2.1091 REPORT VERSION : V1.0 Attestation of Global Compliance (Shenzhen) Co., Ltd Report No.: AGC06164260303FH01 Page 2 of 10 Report Revise Record Report Version Revise Time Issued Date Valid Version Notes V1.0 / Apr. 01, 2026 Valid Initial Release Report No.: AGC06164260303FH01 Page 3 of 10 Table of Contents 1. General Information ........................................................................................................................................ 4 2. Product Information ........................................................................................................................................ 5 2.1 Product Technical Description ................................................................................................................... 5 3. Test Environment ............................................................................................................................................ 6 3.1 Address Of The Test Laboratory ............................................................................................................... 6 3.2 Test Facility ................................................................................................................................................ 6 3.3 Environmental Conditions ......................................................................................................................... 7 4. Mobile Device Evaluation Method and Limit ................................................................................................ 8 5. Measurement Results ..................................................................................................................................... 9 6. Measurement Evaluation ................................................................................................................................ 9 Report No.: AGC06164260303FH01 Page 4 of 10 1. General Information Applicant SOLARSHINGLE SOLUTION (SG) PTE. LTD. Address 190 Clemenceau Avenue #06-08 Singapore 239924, Singapore Manufacturer SOLARSHINGLE SOLUTION (SG) PTE. LTD. Address 190 Clemenceau Avenue #06-08 Singapore 239924, Singapore Factory New Farmland Inc. Address Add:187 Glen Morris Road E., Brant, Ontario, N0E 1NO, Canada Product Designation SPE Sensor Brand Name SPE Test Model SPE-S-AT Date of receipt of test item Mar. 18, 2026 Date of Test Mar. 18, 2026~ Apr. 01, 2026 Deviation from Standard No any deviation from the test method Condition of Test Sample Normal Test Result Pass Test Report Form No AGCER-FCC-RF Exposure-V1 Note: The test results of this report relate only to the tested sample identified in this report. Prepared By Cool Cheng (Project Engineer) Apr. 01, 2026 Reviewed By Bibo Zhang (Reviewer) Apr. 01, 2026 Approved By Angela Li (Authorized Officer) Apr. 01, 2026 Report No.: AGC06164260303FH01 Page 5 of 10 2. Product Information 2.1 Product Technical Description Frequency Band (Operating) WLAN: 2.412GHz ~ 2.462GHz WLAN: 5.18GHz ~ 5.32GHz / 5.50GHz ~ 5.70GHz WLAN: 5.745GHz ~ 5.825GHz Bluetooth: 2.402GHz ~ 2.480GHz SRD_2.4G: 2.402GHz ~ 2.480GHz Other: 462.5500-462.7250MHz, 462.5625-462.7125MHz 467.5500-467.7250MHz Hardware Version V3 Software Version SPE-SD222 Modulation Type GFSK Device Category Portable (<20cm separation) Mobile (>20cm separation) Others: Antenna Diversity Single antenna Multiple antennas Tx diversity Rx diversity Tx/Rx diversity Antenna Designation PCB Antenna Antenna Gain -2.699dBi Minimum Assessment Distance 20cm Evaluation Applied MPE Evaluation SAR Evaluation Report No.: AGC06164260303FH01 Page 6 of 10 3. Test Environment 3.1 Address Of The Test Laboratory Laboratory: Attestation of Global Compliance (Shenzhen) Co., Ltd. Address: 1-2/F, Building 19, Junfeng Industrial Park, Chongqing Road, Heping Community, Fuhai Street, Bao'an District, Shenzhen, Guangdong, China 3.2 Test Facility The test facility is recognized, certified, or accredited by the following organizations: CNAS-Lab Code: L5488 Attestation of Global Compliance (Shenzhen) Co., Ltd. has been assessed and proved to follow CNAS-CL01 Accreditation Criteria for Testing and Calibration Laboratories (identical to ISO/IEC17025: 2017 General Requirements for the Competence of Testing and Calibration Laboratories.) A2LA-Lab Cert. No.: 5054.02 Attestation of Global Compliance (Shenzhen) Co., Ltd. EMC Laboratory has been accredited by A2LA for technical competence in the field of electrical testing, and proved to follow ISO/IEC 17025: 2017 General Requirements for the Competence of Testing and Calibration Laboratories and any additional program requirements in the identified field of testing. FCC-Registration No.: 975832 Attestation of Global Compliance (Shenzhen) Co., Ltd. EMC Laboratory has been registered and fully described in a report filed with the FCC (Federal Communications Commission). The acceptance letter from the FCC is maintained in our files with Registration 975832. IC-Registration No.: 24842(CAB identifier: CN0063) Attestation of Global Compliance (Shenzhen) Co., Ltd. EMC Laboratory has been registered and fully described in a report filed with the Certification and Engineering Bureau of Industry Canada. The acceptance letter from the IC is maintained in our files with Registration 24842. Report No.: AGC06164260303FH01 Page 7 of 10 3.3 Environmental Conditions Normal Conditions Temperature range (°C) 15 - 35 Relative humidity range 20 % - 75 % Pressure range (kPa) 86 - 106 Power supply DC 24V by DC source Report No.: AGC06164260303FH01 Page 8 of 10 4. Mobile Device Evaluation Method and Limit Human exposure to RF emissions from mobile devices (47 CFR §2.1091) may be evaluat…

Text truncated - open the document above for the full version.

Page 1 of 48 FCC Test Report Report No.: AGC06164260303FR01 FCC ID : 2BVDB-SPE-S-AT APPLICATION PURPOSE : Original Equipment PRODUCT DESIGNATION : SPE Sensor BRAND NAME : SPE MODEL NAME : SPE-S-AT APPLICANT : SOLARSHINGLE SOLUTION (SG) PTE. LTD. DATE OF ISSUE : Apr. 01, 2026 STANDARD(S) : FCC Part 15 Subpart C §15.247 REPORT VERSION : V1.0 Attestation Of Global Compliance (Shenzhen) Co., Ltd Report No.: AGC06164260303FR01 Page 2 of 48 Report Revise Record Report Version Revise Time Issued Date Valid Version Notes V1.0 / Apr. 01, 2026 Valid Initial Release Report No.: AGC06164260303FR01 Page 3 of 48 Table of Contents 1. General Information ........................................................................................................................................ 5 2. Product Information ........................................................................................................................................ 6 2.1 Product Technical Description ................................................................................................................... 6 2.2 Test Frequency List ................................................................................................................................... 6 2.3 Related Submittal(S) / Grant (S) ............................................................................................................... 7 2.4 Test Methodology ...................................................................................................................................... 7 2.5 Special Accessories .................................................................................................................................. 7 2.6 Equipment Modifications ........................................................................................................................... 7 2.7 Antenna Requirement................................................................................................................................ 7 3. Test Environment ............................................................................................................................................ 8 3.1 Address of the Test Laboratory ................................................................................................................. 8 3.2 Test Facility ................................................................................................................................................ 8 3.3 Environmental Conditions ......................................................................................................................... 9 3.4 Measurement Uncertainty ......................................................................................................................... 9 3.5 List of Equipment Use ............................................................................................................................. 10 4.System Test Configuration ............................................................................................................................ 12 4.1 EUT Configuration ................................................................................................................................... 12 4.2 EUT Exercise ........................................................................................................................................... 12 4.3 Configuration of Tested System .............................................................................................................. 12 4.4 Equipment Used In Tested System ........................................................................................................ 12 4.5 Summary of Test Results ........................................................................................................................ 13 5. Description of Test Modes ........................................................................................................................... 14 6. Duty Cycle Measurement ............................................................................................................................. 15 7. RF Output Power Measurement .................................................................................................................. 16 7.1 Provisions Applicable .............................................................................................................................. 16 7.2 Measurement Procedure ......................................................................................................................... 16 7.3 Measurement Setup (Block Diagram of Configuration) .......................................................................... 16 7.4 Measurement Result ............................................................................................................................... 17 8. 6dB Bandwidth Measurement ...................................................................................................................... 20 8.1 Provisions Applicable .............................................................................................................................. 20 8.2 Measurement Procedure ......................................................................................................................... 20 8.3 Measurement Setup (Block Diagram of Configuration) .......................................................................... 20 8.4 Measurement Results ............................................................................................................................. 21 9. Power Spectral Density Measurement ........................................................................................................ 25 9.1 Provisions Applicable .............................................................................................................................. 25 9.2 Measure…

Text truncated - open the document above for the full version.

Page 1 of 15 Antenna Test Report Report No.: AGC06164260303PA01 PRODUCT DESIGNATION : SPE Sensor BRAND NAME : SPE MODEL NAME : SPE-S-AT APPLICANT : SOLARSHINGLE SOLUTION (SG) PTE. LTD. DATE OF ISSUE : Apr. 01, 2026 REPORT VERSION : V1.0 Attestation of Global Compliance (Shenzhen) Co., Ltd Report No.: AGC06164260303PA01 Page 2 of 15 Report Revise Record Report Version Revise Time Issued Date Valid Version Notes V1.0 / Apr. 01, 2026 Valid Initial Release Report No.: AGC06164260303PA01 Page 3 of 15 Table of Contents 1. General Information ........................................................................................................................................ 4 2. Product Technical Information ...................................................................................................................... 5 3. Test Summary List .......................................................................................................................................... 5 4. Test Environment ............................................................................................................................................ 6 4.1 Address of The Test Laboratory ................................................................................................................ 6 4.2 Test Facility ................................................................................................................................................ 6 4.3 Environmental Conditions ......................................................................................................................... 7 4.4 Measurement Uncertainty ......................................................................................................................... 7 4.5 List of Equipment Used ............................................................................................................................. 7 5. Antenna Passive Measurement Results ....................................................................................................... 8 5.1 Test Setup .................................................................................................................................................. 8 5.2 VSWR Test Result ..................................................................................................................................... 9 5.3 Gain and Efficiency Test Result .............................................................................................................. 10 5.4 Radiation Pattern Diagram ...................................................................................................................... 11 Appendix I: Photographs of Test Setup .......................................................................................................... 13 Appendix II: Photographs of Test EUT ........................................................................................................... 14 Report No.: AGC06164260303PA01 Page 4 of 15 1. General Information Applicant SOLARSHINGLE SOLUTION (SG) PTE. LTD. Address 190 Clemenceau Avenue #06-08 Singapore 239924, Singapore Manufacturer SOLARSHINGLE SOLUTION (SG) PTE. LTD. Address 190 Clemenceau Avenue #06-08 Singapore 239924, Singapore Factory New Farmland Inc. Address Add:187 Glen Morris Road E., Brant, Ontario, N0E 1NO, Canada Product Designation SPE Sensor Brand Name SPE Test Model SPE-S-AT Series Model(s) N/A Difference Description N/A Date of receipt of test item Mar. 18, 2026 Date of Test Mar. 18, 2026~ Apr. 01, 2026 Test Report Form No AGCER-OTA- Passive -V1 Note: The test results of this report relate only to the tested sample identified in this report. Prepared By Cool Cheng (Project Engineer) Apr. 01, 2026 Reviewed By Bibo Zhang (Reviewer) Apr. 01, 2026 Approved By Angela Li (Authorized Officer) Apr. 01, 2026 Report No.: AGC06164260303PA01 Page 5 of 15 2. Product Technical Information Frequency Range 2400MHz-2500MHz Test Frequency 2400MHz;2410MHz,2420MHz,2430MHz,2440MHz,2450MHz, 2460MHz,2470MHz,2480MHz,2490MHz, 2500MHz Antenna Type PCB Antenna Dimensions 15mm*5mm Impedance 50Ω Maximum test values Gain: -2.544dBi; Efficiency: 7.806%; VSWR: 1.090:1 3. Test Summary List NO. Test item Remark 1 VSWR -- 2 Gain and efficiency -- 3 Radiation pattern -- Report No.: AGC06164260303PA01 Page 6 of 15 4. Test Environment 4.1 Address of The Test Laboratory Laboratory: Attestation of Global Compliance (Shenzhen) Co., Ltd. Address: 1-2/F, Building 19, Junfeng Industrial Park, Chongqing Road, Heping Community, Fuhai Street, Bao'an District, Shenzhen, Guangdong, China 4.2 Test Facility The test facility is recognized, certified, or accredited by the following organizations: CNAS-Lab Code: L5488 Attestation of Global Compliance (Shenzhen) Co., Ltd. has been assessed and proved to follow CNAS-CL01 Accreditation Criteria for Testing and Calibration Laboratories (identical to ISO/IEC17025: 2017 General Requirements for the Competence of Testing and Calibration Laboratories.) A2LA-Lab Cert. No.: 5054.02 Attestation of Global Compliance (Shenzhen) Co., Ltd. EMC Laboratory has been accredited by A2LA for technical competence in the fiel…

Text truncated - open the document above for the full version.