2BVDR-L1L5Laser Engraving Machine

Manufacturer:Laservii (Shenzhen) Technology Co., Ltd. Address:Factory 201, Nankeng Second Industrial Zone, Nankeng Community, Bantian Street, Longgang, Shenzhen, Guangdong, China All operators shall thoroughly read, comprehend and follow all contents of this instruction manual prior to any Laser Engraving Machine L1 Original Version:V1.0.0 machine operation, commissioning, adjustment or maintenance. EC Declaration of Conformity (Summary Manufacturer:Laservii (Shenzhen) Technology Co., Ltd. Address:Factory 201, Nankeng Second Industrial Zone, Nankeng Community, Bantian Street, Longgang, Shenzhen, Guangdong, China, 518000 Product: Laser Engraving Machine Model: L1 (3W / 7W / 12W / 24W) Year of manufacture: 2026 onwards Hereby, Laservii (Shenzhen) Technology Co., Ltd. declares that the radio equipment type Laser Engraving Machine (L1 Series) is in compliance with Di rective 2014/53/EU.: - - Applicable Directives: 1Machinery Directive 2006/42/EC 2Electromagnetic Compatibility Directive 2014/30/EU 3Radio Equipment Directive 2014/53/EU - -Radio Equipment Directive (RED): 1EN 301 489-1 V2.2.3 (EMC – General) 2EN 301 489-17 V3.3.1 (EMC – Broadband) 3EN 300 328 V2.2.2 (2.4 GHz RF Testing) 4EN IEC 61000-6-3:2021 (Emission) 5EN IEC 61000-6-1:2019 (Immunity) 6EN IEC 62311:2020 (Human Exposure) --Laser Safety: 1IEC 60825-1:2014&EN 60825-1:2014+A11:2021&EN 50689:2021 (Consumer Laser Products) 2CAN/CSA-E60825-1:15 --Electrical Safety:UL/CSA 62368-1 - -Machinery Safety:EN ISO 12100:2010EN 60204-1:2018 -- -- ) This residual risk warning label is affixed to safety doors and optical maintenance covers. It indicates that Class 4 dangerous laser radiation will be emitted when protective covers are opened or safety interlocks are bypassed. Avoid eye and skin exposure to direct or scattered laser radiation. Cut off the main power supply before any disassembly or maintenance. Complies with IEC 60825-1:2014, EN 60825-1:2014+A11:2021. This information marking is mounted on the front operation panel. It declares the unit is a Class 1 laser product with fully enclosed optical path, no laser hazard under normal operation. It lists applicable IEC and EU laser safety standards, complying with marking requirements of Machinery Directive 2006/42/EC and EN 60204-1. This primary laser danger warning label is attached to the main laser protective housing. It warns of invisible Class 4 laser radiation which can cause permanent eye and skin injury. It specifies maximum laser output 24 W, wavelength 450 nm and relevant standards. All operators shall stay away from direct and scattered laser beams during operation and service. This beam direction warning marker is fixed beside optical channels and laser emitters. The arrow clearly shows the outgoing direction of laser beam. Operators and service staff shall not look along the beam path to prevent scattered light from entering eyes, with the standard laser hazard triangle symbol to mark radiation risky zone. This ISO standard universal laser hazard triangular symbol is placed prominently on laser outlets and protective covers. The yellow triangular hazard sign with laser radiation graphic globally indicates laser injury risk. It is the primary visual safety reminder that all personnel must take protective precautions when seeing this marking. Safety Warning Instructions This high voltage shock warning label is fitted on electrical cabinets and high-voltage terminals. High voltage parts inside may cause fatal shock. Disconnect main power before opening covers. Only qualified personnel may remove electrical guards, compliant with EN 60204-1 and 2006/42/EC. This combined prohibition label is mounted on the operation panel, containing six core safety prohibitions with graphics and English captions. Operators shall comply with all restrictions to avoid laser, mechanical and fire hazards, compliant with EN 60204-1, EN 60825-1 and 2006/42/EC. Safety Warning Instructions Caution: The user is cautioned that changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio fr equency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, ther e is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television recepti on, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. FCC Radiation Exposure Statement:This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body. Safety Warning Instructions Product Definition A laser engraving machine is equipment that uses a high-energy-density laser beam to irradiate material su…

Text truncated - open the document above for the full version.

SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-02 Rev 1.1 Page: 1 of 4 Appendix External Photos for GZCR2601000246MD SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-02 Rev 1.1 Page: 2 of 4 EUT Constructional Details (EUT Photos) SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-02 Rev 1.1 Page: 3 of 4 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-02 Rev 1.1 Page: 4 of 4 - End of the Appendix -

SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-03 Rev 1.1 Page: 1 of 12 Appendix Internal Photos for GZCR2601000246MD SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-03 Rev 1.1 Page: 2 of 12 EUT Constructional Details (EUT Photos) SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-03 Rev 1.1 Page: 3 of 12 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-03 Rev 1.1 Page: 4 of 12 BLE ANT SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-03 Rev 1.1 Page: 5 of 12 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-03 Rev 1.1 Page: 6 of 12 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-03 Rev 1.1 Page: 7 of 12 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-03 Rev 1.1 Page: 8 of 12 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-03 Rev 1.1 Page: 9 of 12 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-03 Rev 1.1 Page: 10 of 12 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-03 Rev 1.1 Page: 11 of 12 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-03 Rev 1.1 Page: 12 of 12 - End of the Appendix -

SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-TRF-03 Rev 2.0 Report No.:GZCR260100024603 Page: 1 of 9 FCC ID: 2BVDR-L1L5 RF EXPOSURE EVALUATION REPORT Application No.: GZCR2601000246MD Applicant:Laservii (Shenzhen) Technology Co., Ltd. Address of Applicant:Factory 201, Nankeng Second Industrial Zone, Nankeng Community, Bantian Street, Longgang, Shenzhen, Guangdong, China Manufacturer:Laservii (Shenzhen) Technology Co., Ltd. Address of Manufacturer:Factory 201, Nankeng Second Industrial Zone, Nankeng Community, Bantian Street, Longgang, Shenzhen, Guangdong, China Factory:Laservii (Shenzhen) Technology Co., Ltd. Address of Factory:Factory 201, Nankeng Second Industrial Zone, Nankeng Community, Bantian Street, Longgang, Shenzhen, Guangdong, China Product Name:Laser Engraving Machine Model No.: L1, L1 Mini 3W, L1 Mini 7W, L1 Pro 7W, L1 Pro 12W, L1 Pro 24W, L1 Plus 24W, L1 Plus 36W, L1 Ultra, L5, L5 Pro, L5 Ultra   Please refer to section 2 of this report which indicates which item was actually evaluated and which were electrically identical. Trade Mark:Laservii Standard(s) : KDB 447498 D01 V06 47 CFR Part 1.1310 Date of Receipt: 2026-01-28 Date of Evaluation: 2026-07-16 to 2026-07-16 Date of Issue: 2026-07-21 Evaluation Result: Pass* * In the configuration evaluated, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-TRF-03 Rev 2.0 Report No.:GZCR260100024603 Page: 2 of 9 Revision Record VersionReport No.DateRemark 01GZCR2601000246032026-07-21Original Authorized for issue by: Luke Lin/Project Engineer Approved By Vico Cui/Reviewer SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-TRF-03 Rev 2.0 Report No.:GZCR260100024603 Page: 3 of 9 2Evaluation Summary ItemStandardMethodRequirementResult RF Exposure KDB 447498 D01 V06 KDB 447498 D01 V0647 CFR Part 1.1310Pass Note: E.U.T./EUT means Equipment Under Test. Pass means the test result passed the test standard requirement, please find the detailed decision rule in the report relative section.  Declaration of EUT Family Grouping: Model No.: L1, L1 Mini 3W, L1 Mini 7W, L1 Pro 7W, L1 Pro 12W, L1 Pro 24W, L1 Plus 24W, L1 Plus 36W, L1 Ultra, L5, L5 Pro, L5 Ultra According to the declaration from the applicant, the electrical circuit design, layout, components used and internal wiring were identical for all models, with only difference on the laser module and machine frame. Therefore only one model L1 was evaluated in this report. SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-TRF-03 Rev 2.0 Report No.:GZCR260100024603 Page: 4 of 9 3Contents Page 1Cover Page...............................................................................................................................................1 2Evaluation Summary................................................................................................................................3 3Contents....................................................................................................................................................4 4General Information.................................................................................................................................5 4.1Details of E.U.T.................................................................................................................................5 4.2Evaluating Location...........................................................................................................................5 4.3Facility...............................................................................................................................................6 4.4Deviation from Standards..................................................................................................................6 4.5Abnormalities from Standard Conditions...........................................................................................6 5Technical Requirements Specification..................................................................................................7 5.1General Description of Applied Standards........................................................................................7 5.2RF Exposure Evaluation....................................................................................................................7 5.2.1Limit & Test Method......................................................................................................................7 5.2.2Conclusion....................................................................................................................................8 6EUT Constructional Details (EUT Photos).............................................................................................9 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-TRF-03 Rev 2.0 Report No.:GZCR260100024603 Page: 5 of 9 4General Information 4.1Details of E.U.T. Power supply:DC 24V Powered by AD/DC adapter: Model: FY-1202405000 AC 100-240V 50/60Hz 2.5A OUTPUT: DC 24V 5A Cable(s):AC mains, 3 wires, 2.0m, unshielded. RF character:Refer to report GZCR260100024602 for BLE detail. Remark: The information in this section is provided by the applicant or manufacturer, SGS is not liable to the accuracy, suitability, reliability or/and integrity of the information. 4.2Evaluating Location All tests were performed at: SGS-CSTC Standards Technical Services Co., Ltd., Guangzhou Branch EMC Laboratory, No.198, Kezhu Road, Science City, Economic & Technological Development Area, Guangzhou, Guangdong, China 510663 Tel: +86 20 82155555 No tests were sub-contracted. SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-TRF-03 Rev 2.0 Report No.:GZCR260100024603 Page: 6 of 9 4.3Facility The facility is recognized, certified, or accredited by the following organizations: ● ACMA SGS-CSTC Standards Technical Services Co., Ltd., EMC La…

Text truncated - open the document above for the full version.

深圳市飞易通科技有限公司 www.feasycom.com Bluetooth antenna of PCB on-board specification 1，Index Item Content Page Remark 1 Index 1 2 Spec Drawing 2 3 Specification 2 4 Antenna On Test Board 3 5 Return Loss 3 6 Radiation Pattern 3 Document Type: 2.4GHZ coil antenna Document Version: V1.0 Release Date: Aug. 23，2017 Feasycom Technology Co.,Ltd. Telephone: 86-755-27924639 www.feasycom.com Shenzhen Feasycom Technology Co., LTD. Antenna manufacturer: Shenzhen Feasycom Co.,Ltd Address:Rm 508, Building A, Fenghuang Zhigu, No.50, Tiezai Road, Xixiang, Baoan District, Shenzhen, 518102, China 深圳市飞易通科技有限公司 www.feasycom.com 2，Spec Drawing 3，Specification Product Number: 2.4GHZ coil antenna Sample Photo: A. Electrical Characteristics Frequency 2400 ~ 2500 MHz S.W.R. <=2.0 Gain 2.0 dBi Efficiency ~ 50% Polarization Linear Impedance 50 Ohm B. Material & Mechanical Characteristics Material of Radiator Gold-plated copper C. Environmental Operation Temperature - 40°C ~ + 85°C Storage Temperature - 40°C ~ + 105°C Shenzhen Feasycom Technology Co., LTD. 深圳市飞易通科技有限公司 www.feasycom.com 4，Antenna On Test Board 5, Return Loss 6，Radiation Pattern Radiation Pattern and Gain were dependent on measurement board design. The specification of coil antenna was measur ed based on the PCB size and installation position as shown in the below figure Test Board. FR4 Thickness 0.8mm Shenzhen Feasycom Technology Co., LTD. 深圳市飞易通科技有限公司 www.feasycom.com Vertical Horizontal Y ‐ Z Plane Average Gain=1.19 dBi Peak Gain = 3.12 dBi Average Gain = 0.75 dBi Peak Gain= ‐1.33 dBi Average Gain=‐8.7 dBi X ‐ Z Plane Average Gain=‐2.91d Bi Peak Gain= ‐3.71 dBi Average Gain= ‐8.76dBi Peak Gain= ‐0.29 dBi Average Gain= ‐4.19dBi X ‐ Y Plane Average Gain=‐0.95 dBi Peak Gain= 0.77 dBi Average Gain= ‐5.86dBi Peak Gain= 1.35 dBi Average Gain= ‐2.62 dBi Shenzhen Feasycom Technology Co., LTD.

SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-TRF-01 Rev 2.1 Report No.:GZCR260100024602 Page: 1 of 70 FCC ID: 2BVDR-L1L5 TEST REPORT Application No.: GZCR2601000246MD Applicant: Laservii (Shenzhen) Technology Co., Ltd. Address of Applicant: Factory 201, Nankeng Second Industrial Zone, Nankeng Community, Bantian Street, Longgang, Shenzhen, Guangdong, China Manufacturer: Laservii (Shenzhen) Technology Co., Ltd. Address of Manufacturer: Factory 201, Nankeng Second Industrial Zone, Nankeng Community, Bantian Street, Longgang, Shenzhen, Guangdong, China Factory: Laservii (Shenzhen) Technology Co., Ltd. Address of Factory: Factory 201, Nankeng Second Industrial Zone, Nankeng Community, Bantian Street, Longgang, Shenzhen, Guangdong, China Product Name: Laser Engraving Machine Model No.: L1, L1 Mini 3W, L1 Mini 7W, L1 Pro 7W, L1 Pro 12W, L1 Pro 24W, L1 Plus 24W, L1 Plus 36W, L1 Ultra, L5, L5 Pro, L5 Ultra   Please refer to section 2 of this report which indicates which item was actually tested and which were electrically identical. Trade Mark: Laservii Standard(s) : 47 CFR Part 15, Subpart C 15.247 Date of Receipt: 2026-01-28 Date of Test: 2026-04-14 to 2026-07-16 Date of Issue: 2026-07-21 Test Result: Pass* * In the configuration tested, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-TRF-01 Rev 2.1 Report No.:GZCR260100024602 Page: 2 of 70 Revision Record Version Report No. Date Remark 01 GZCR260100024602 2026-07-21 Original Authorized for issue by: Luke Lin/Project Engineer Approved By Vico Cui/Reviewer SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-TRF-01 Rev 2.1 Report No.:GZCR260100024602 Page: 3 of 70 2 Test Summary Radio Spectrum Technical Requirement Item Standard Method Requirement Result Antenna Requirement 47 CFR Part 15, Subpart C 15.247 N/A 47 CFR Part 15, Subpart C 15.203 & 15.247(b)(4) Pass Radio Spectrum Matter Part Item Standard Method Requirement Result Conducted Emissions at AC Power Line (150kHz-30MHz) 47 CFR Part 15, Subpart C 15.247 ANSI C63.10- 2020+COR.1- 2023Section 6.2 47 CFR Part 15, Subpart C 15.207 Pass Radiated Emissions which fall in the restricted bands ANSI C63.10- 2020+COR.1- 2023Section 6.10.5 & 11.12 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Radiated Spurious Emissions Below 1GHz ANSI C63.10- 2020+COR.1- 2023Section 6.4,6.5 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Radiated Spurious Emissions Above 1GHz ANSI C63.10- 2020+COR.1- 2023Section 6.6 & 11.12 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Maximum Conducted Output Power ANSI C63.10- 2020+COR.1- 2023Section 11.9.1 47 CFR Part 15, Subpart C 15.247(b)(3) Pass Minimum 6dB Bandwidth ANSI C63.10- 2020+COR.1- 2023Section 11.8.1 47 CFR Part 15, Subpart C 15.247a(2) Pass Power Spectral Density ANSI C63.10- 2020+COR.1- 2023Section 11.10.3 47 CFR Part 15, Subpart C 15.247(e) Pass Conducted Band Edges Measurement ANSI C63.10- 2020+COR.1- 2023Section 6.10.4 47 CFR Part 15, Subpart C 15.247(d) Pass Conducted Spurious Emissions ANSI C63.10- 2020+COR.1- 2023Section 11.11 47 CFR Part 15, Subpart C 15.247(d) Pass Note: E.U.T./EUT means Equipment Under Test. Pass means the test result passed the test standard requirement, please find the detailed decision rule in the report relative section. N/A means Not applicable, please find the detailed decision rule in the report relative section. SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-TRF-01 Rev 2.1 Report No.:GZCR260100024602 Page: 4 of 70  Declaration of EUT Family Grouping: Model No.: L1, L1 Mini 3W, L1 Mini 7W, L1 Pro 7W, L1 Pro 12W, L1 Pro 24W, L1 Plus 24W, L1 Plus 36W, L1 Ultra, L5, L5 Pro, L5 Ultra According to the declaration from the applicant, the electrical circuit design, layout, components used and internal wiring were identical for all models, with only difference on the laser module and machine frame. Therefore only one model L1 was tested in this report. SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-TRF-01 Rev 2.1 Report No.:GZCR260100024602 Page: 5 of 70 3 Contents Page 1 Cover Page ................................................................................................................................................. 1 2 Test Summary ............................................................................................................................................ 3 3 Contents ..................................................................................................................................................... 5 4 General Information ................................................................................................................................... 7 4.1 Details of E.U.T. .................................................................................................................................. 7 4.2 Description of Support Units ............................................................................................................... 7 4.3 Measurement Uncertainty ................................................................................................................... 8 4.4 Test Location ....................................................................................................................................... 8 4.5 Test Facility ......................................................................................................................................... 9 4.6 Deviation from Standards .................................................................................................................... 9 4.7 Abnormalities from Standard Conditions ............................................................................................ 9 5 Equipment List ......................................................................................................................................... 10 6 …

Text truncated - open the document above for the full version.

SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-04 Rev 1.1 Page: 1 of 4 Appendix Test Setup Photo for GZCR260100024602 Test Model No.: L1 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-04 Rev 1.1 Page: 2 of 4 Test Setup Photo Conducted Emissions at AC Power Line (150kHz-30MHz) Radiated Emissions which fall in the restricted bands & Radiated Spurious Emissions Above 1GHz SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-04 Rev 1.1 Page: 3 of 4 Radiated Spurious Emissions Below 1GHz SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-04 Rev 1.1 Page: 4 of 4 - End of the Appendix -