2BVF4-A1AI Smart Recorder

AI Smart Recorder User Manual Product Overview Please read this manual carefully before use and keep it in a safe place. Switch Recording ModeStatus DisplayRecord buttonCharging portmicrophone Magnetic charging cableMagnetic leather caseMagnetic ring Device Button Guide II. Switching recording scenes I. Power/Record Button Press and hold for 3 seconds: Turn on/off Press once: Start recording/Stop recording. Note:When using call mode, attach the recording card to the back of your phone using the magnetic case, and ensure the phone is in speakerphone mode (not a Bluetooth call). Scroll up: Mobile calling scenarios Suitable for telephone communication, such as teleconferences,phone interviews, and customer service recordings. Swipe down: Common recording scenarios Ideal for face-to-face interactions, such as meetings, classrooms, interviews, and other in-person settings. How to attach the audio card to your phone Bring your own magnetically compatible phone (such as the iPhone 12 or later). No magnetic ring is needed—simply insert the recording card into the case and attach the case to the back of your phone. For non-magnetic phones (such as Android devices), a magnetic ring is required. Step 1. First, mark the spots on the back of your phone where the leather case and magnetic ring will go; Step 2. Peel off the protective film from the magnetic ring and attach it to the back of your phone; Step 3. Insert the recording card into the case, then attach the case to the back of your phone. Connect the app to enable smart recording Once you connect the app, you can experience new-generation voice recording features such as speech-to-text conversion and AI summarization. Search for “soninote” in the App Store, then download and install it I. Install the app 1. Internet connection: Make sure your phone is connected to the internet to enable real-time transcription while recording. 2. Bluetooth Connection: Press and hold button ② on the voice recorder to turn it on. In the app, tap “Scan.” Once the voice recorder is detected, tap “Connect” (as shown below). If the Bluetooth icon on the voice recorder’s LCD screen is flashing, it means the Bluetooth connection was not established; you will need to reconnect (you can try restarting the voice recorder or the app). Note: Make sure Bluetooth is enabled on your phone and grant the app the necessary permissions. II. Preparations Before Recording Search for devices Connect devices Discover the following equipment Connect Equipment: III. Choosing a Recording Setting Mobile phone call scenarios: Suitable for telephone communications, such as remote meetings, phone interviews, and customer service recordings. Press button ① on the voice recorder: slide it up to record phone calls, and slide it down to record regular audio. Place the audio card as close to the sound source as possible to improve sound pickup accuracy. Common recording scenarios: Ideal for face-to-face interactions, such as meetings, classrooms, interviews, and other in-person settings. Method 1: Select any recording mode (Recording/Transcription, Bilingual Conversation, or Simultaneous Interpretation) in the mobile app to start recording. The voice recorder will vibrate gently once to indicate that recording has begun. Method 2: Press and hold button 2 on the voice recorder to start recording (this method defaults to transcription mode). The voice recorder will vibrate gently once to indicate that recording has begun. Note:When recording, select the appropriate language in the app for faster and more accurate transcription. This device supports speech recognition and transcription in 100 languages (see the list of languages below). IV. Start Recording/Transcription Scan the QR code to access more tutorials V. Stop recording/transcribing Method 1: Tap “Stop” in the mobile app to stop recording. Method 2: Press and release button ② on the voice recorder to stop recording. You can perform the following actions on files via the app or the web interface (soninote.bfsign.com): rename, translate, generate AI summaries, copy, export, share, and delete. VI. Further Processing of Audio Files The device won't turn on: The battery is likely dead. Do not attempt to turn it on; charge it immediately. Button stuck: Press and hold the power button for 10 seconds to reset the device. Unable to record: Restart your device and the app. Please use a charger that meets the specified standards; failure to do so may result in accidents or equipment malfunction (which would be considered user damage and is not covered by the warranty). Troubleshooting Charger Specifications AC 110-240V 50/60Hz,Max 100mAInput: DC 5.0V 1AOutput: Language Recognition Features and List Supports recognition, transcription, and translation in over 100 languages (see the app for details) This product does not include a power adapter. Basic Parameters Product Name Product Dimensions microphone Memory Bluetooth version Bluetooth frequency Charging Cable Type Rated power Housing Material Product Model Net weight of the product Microphone sensitivity FCC-ID Bluetooth transmission power Bluetooth profiles Battery Rated voltage Operating temperature A1 About 30 g -36db 2BVF4-A1 -5.57dBm ****** 400mAh 4.2V -10 ~55°C Supported Operating Systems iOS 12.0, Android 10.0, Windows 7.0 and later 64G 5.3 2.4GHz Type-C to Magnetic Charging Cable 70 milliwatts aluminum alloy AI Smart Recorder 86x54x3.2mm 2 x silicon microphones, 1 x bone conduction microphone This product uses flash memory to store data. Please sync with the app or back up your data on a computer promptly. The company assumes no liability for any loss of data. The illustrations in this manual regarding the product and its operation are for reference only and may differ from the actual product. Please refer to the actual product. The Company reserves the right to the final interpretation of this disclaimer. Disclaimer Declaration of Toxic and Hazardous Substances or Elements Part Name PCB Bo…

Text truncated - open the document above for the full version.

LocalRepresentativeLetter ForCertificationServiceintheUSA FederalCommunicationsCommission EquipmentAuthorizationDivision,ApplicationProcessingBranch 7435OaklandMillsRoad Columbia,MD21048 Towhomitmayconcern PursuanttoSection2.911(d)(7),oftheCommission’sRules(47C.F.R.)weattestasfollowsfor theproductlistedbelow: FCCIDModelname 2BVF4-A1A1 Weherebyacknowledgeasfollows: i.bothsigneesconfirmthatthepointofcontactacceptsresponsibilitytoactasaUS- AmericanRepresentativeonbehalfoftheapplicant ii.thepointofcontactprovidesthephysicalU.S.addressandemailaslistedbelow iii.bothpartiesmaintaintherequirementsofthisagreementwithoutexpirationdate US-AmericanPointofContactApplicant/ApprovalHolder SignatureSignature CompanyName:LOBOSIOWAINCAnhuiShengyunIntelligent TechnologyCo.,Ltd. FRN:00364139610038221396 ContactName:HarleyLiYuemengJiang Address:4623BittercreekDrColorado SpringsCO80922US Room120,B2#,HongfengZhigu PioneerPark,8HongfengRoad, High-techZone,HefeiCity,Anhui Province Phone:+18188180538N/A Email:[email protected]@qq.com

CoveredEquipmentAttestationLetter ForCertificationServiceintheUSA FederalCommunicationsCommission EquipmentAuthorizationDivision,ApplicationProcessingBranch 7435OaklandMillsRoad Columbia,MD21048 Towhomitmayconcern PursuanttoSection2.911(d)(5)(i)-(ii)oftheCommission’sRules(47C.F.R.)weattestas followsfortheproductlistedbelow: FCCIDModelname 2BVF4-A1A1 We, Applicant CompanyName:AnhuiShengyunIntelligentTechnologyCo., Ltd. Address:Room120,B2#,HongfengZhiguPioneer Park,8HongfengRoad,High-techZone, HefeiCity,AnhuiProvince Phone:N/A certifythattheequipmentforwhichauthorizationissoughtisnot“covered”equipment prohibitedfromreceivinganequipmentauthorizationpursuanttosection2.903oftheFCC rules.Thisincludesthecybersecurityandanti-virussoftwareproducedorprovidedby KasperskyLab,Inc.oranyofistsuccessorsandassignees. Wecertifythat,asofthedateofthefilingoftheapplication,theapplicantisnotidentified ontheCoveredListasanentityproducing“covered”equipment. Ifyouhaveanyquestions,pleasefeelfreetocontactusattheaddressshownbelow. Sincerely, 2026-04-15 SignatureDate PrintedNameofSignee:YuemengJiang Company:AnhuiShengyunIntelligent TechnologyCo.,Ltd. Phone:+8617895002673 Email:[email protected] Address:Room120,B2#,HongfengZhigu PioneerPark,8HongfengRoad,High-tech Zone,HefeiCity,AnhuiProvince Fax:N/A

ConfidentialityRequestLetter ForCertificationServiceintheUSA FederalCommunicationCommission EquipmentAuthorizationDivision,ApplicationProcessingBranch 7435OaklandMillsRoad Columbia,MD21048 Towhomitmayconcern PursuanttoParagraphs§0.457and0.459oftheCommission’sRules(47C.F.R.)andSection §552(b)(4)oftheFreedomofInformationAct,werequestconfidentialityforthe documentationofthefollowingproducts: FCCIDModelname 2BVF4-A1A1 Fortheproductslistedabove,werequestpermanentconfidentialityforallapplicable exhibitsasthereare:  theOperationalDescription  theBlockDiagram theSchematics Theabovelistedexhibitscontaintradesecretsandproprietaryinformationthatcouldbeof benefittoourcompetitors. Ifyouhaveanyquestions,pleasefeelfreetocontactusattheaddressshownbelow. Sincerely, 2026-04-15 SignatureDate PrintedNameofSignee/Title:YuemengJiang/Manager Company:AnhuiShengyunIntelligentTechnologyCo.,Ltd. Address:Room120,B2#,HongfengZhiguPioneerPark,8 HongfengRoad,High-techZone,HefeiCity,Anhui Province Phone:+8617895002673 Fax:-- Email:[email protected]

ReportNo.:CISRR26032625701 Page 60 of 63 9.EXTERNALANDINTERNALPHOTOS 9.1.ExternalPhotos ReportNo.:CISRR26032625701 Page 61 of 63

Label Size:20mm*10mm AI Smart Recorder Model No. A1 FCC ID:2BVF4-A1 Label Location

ReportNo.:CISRR26032625701 Page 62 of 63 9.2.InternalPhotos ReportNo.:CISRR26032625701 Page 63 of 63 ------Endofthereport----- ANT

ReportNo.:CISRR26032625702 Reporttemplateversion:CISE-TR-001-A0Page:1of5 TESTREPORT RFExposureEvaluation ReportNo.CISRR26032625702 ProjectNo.CISR260326257 FCCID2BVF4-A1 ApplicantAnhuiShengyunIntelligentTechnologyCo.,Ltd. Address Room120,B2#,HongfengZhiguPioneerPark,8HongfengRoad,High- techZone,HefeiCity,AnhuiProvince ManufacturerAnhuiShengyunIntelligentTechnologyCo.,Ltd. Address Room120,B2#,HongfengZhiguPioneerPark,8HongfengRoad,High- techZone,HefeiCity,AnhuiProvince ProductNameAISmartRecorder Trademark- Model/TypereferenceA1 ListedModel(s)- Standard 47CFRPart2.1093 DateofsamplereceiptMarch28,2026 TestdateMarch28,2026toApril2,2026 IssuedateApril2,2026 TestresultComplied Reviewedby:LucasHuang Approvedby:HansHu Thetestresultsrelateonlytothetestedsamples. ThetestreportshouldnotbereproducedexceptinfullwithoutthewrittenapprovalofShenzhenBangceTesting TechnologyCo.,Ltd. ReportNo.:CISRR26032625702 Reporttemplateversion:CISE-TR-001-A0Page:2of5 1.APPLICABLESTANDARD 47CFRPart2.1093:Radiofrequencyradiationexposureevaluation:portabledevices ANSIC95.1–3999:IEEEStandardforSafetyLevelswithRespecttoHumanExposuretoRadioFrequency ElectromagneticFields,3kHzto300GHz. FCCKDBpublication447498D01GeneralRFExposureGuidancev06:MobileandPortableDevicesRF ExposureProceduresandEquipmentAuthorizationPolicies. 47CFRPart1.1307:Actionsthatmayhaveasignificantenvironmentaleffect,forwhichEnvironmental Assessments(EAs)mustbeprepared. 2.REPORTVERSION VersionNo.IssuedateDescription 00April2,2026Original ReportNo.:CISRR26032625702 Reporttemplateversion:CISE-TR-001-A0Page:3of5 3.RADIOSPECIFICATIONDESCRIPTION Bluetooth Supportedtype:BREDRLE-1Mbps LE-2Mbps Note:PleaserefertoRFreportfordetailedtechnicalspecifications 4.SIMULTANEOUSTRANSMISSIONANALYSIS ThedeviceuseasingletransmittermoduleandantennaforBluetooth,cannottransmitsimultaneously. ReportNo.:CISRR26032625702 Reporttemplateversion:CISE-TR-001-A0Page:4of5 5.TESTRESULT 5.1.Standalonetransmission Limit: KDB447498D01v06,Clause4.3.1a) For100MHzto6GHzandtestseparationdistances≤50mm,the1-gand10-g SARtestexclusionthresholdsaredeterminedbythefollowing: [(max.powerofchannel,includingtune-uptolerance,mW)/(min.testseparation distance,mm)]*[√f(GHz)]≤3.0for1-gSAR,and≤7.5for10-gextremitySAR,where f(GHz)istheRFchanneltransmitfrequencyinGHz PoweranddistanceareroundedtothenearestmWandmmbeforecalculation31The resultisroundedtoonedecimalplaceforcomparison Thevalues3.0and7.5arereferredtoasnumericthresholdsinstepb)below Thetestexclusionsareapplicableonlywhentheminimumtestseparationdistanceis≤50mm, andfortransmissionfrequenciesbetween100MHzand6GHz.Whentheminimumtest separationdistanceis<5mm,adistanceof5mmaccordingto4.1f)isappliedtodetermine SARtestexclusion. Result: Passed TestData Radiotype Frequency (GHz) Maximum output power #1 (dBm) Antenna gain #2 (dBi) Maximum EIRP #3 (dBm) Maximum tune-up #4 EIRP(dBm) Minimum distance (mm) Evaluated value LimitResult BT2.402-5.572.7-2.87-2.005.000.19563.00PASS Note #1:ThisvaluecomesfromtheRFtestreport. #2:Thisvalueisdeclaredbytheapplicant. #3:EIRP=Maximumoutputpower+Antennagain. #4:Thisvalueisdeclaredbytheapplicant. ReportNo.:CISRR26032625702 Reporttemplateversion:CISE-TR-001-A0Page:5of5 5.2.Simultaneoustransmission Limit: KDB447498D01v06,Clause4.3.2,47CFRPart1.1307 InthecaseofxedRFsourcesoperatinginthesametime-averagingperiod,orof multiplemobileorportableRFsourceswithinadeviceoperatinginthesametime averagingperiod,ifthesumofthefractionalcontributionstotheapplicablethresholds islessthanorequalto1asindicatedinthefollowingequation. Where a=numberoffxed,mobile,orportableRFsourcesclaimingexemptionusingparagraph (b)(3)(i)(B)ofthissectionforP,includingexistingexempttransmittersandthosebeing added. b=numberoffxed,mobile,orportableRFsourcesclaimingexemptionusingparagraph (b)(3)(i)(C)ofthissectionforThresholdERP,includingexistingexempttransmittersand thosebeingadded. c=numberofexistingfixed,mobile,orportableRFsourceswithknownevaluationforthespeci edminimumdistanceincludingexistingevaluatedtransmitters. P j =theavailablemaximumtime-averagedpowerortheERP,whicheverisgreater,forxed, mobile,orportableRFsourceiatadistancebetween0.5cmand40cm(inclusive). P th,j =theexemptionthresholdpower(P)accordingtoparagraph(b)(3)(i)(B)ofthissectionfor xed,mobile,orportableRFsourcei. ERP j =theERPoffixed,mobile,orportableRFsourcej. ERP th,j =exemptionthresholdERPforfixed,mobile,orportableRFsourcej,atadistanceofat leastλ/2πaccordingtotheapplicableformulaofparagraph(b)(3)(i)(C)ofthissection. Evaluated k =themaximumreportedSARorMPEoffixed,mobile,orportableRFsourcekeither inthedeviceoratthetransmittersitefromanexistingevaluationatthelocationofexposure. ExposureLimit k =eitherthegeneralpopulation/uncontrolledmaximumpermissibleexposure (MPE)orspecicabsorptionrate(SAR)limitforeachxed,mobile,orportableRFsourcek, asapplicablefrom§1.1310ofthischapter. Result:NotApplicable --------EndofReport--------

2.4GHz3216ChipAntenna:RANT3216F245X02 _ Application: WLAN,802.11b/g,Bluetooth,WLAN,etc... Features SMD,highreliability,ultraImpact,Omni-directional... PartnumberInformation RANT3216F245X02 (A)(B)(C)(D)(E)(F) ElectricalSpecification ThespecificationisdefinedonEVB. DimensionandTerminalConfiguration No.TerminalName 1Feeding/GNG 2GND/Feeding (A)ProductTypeChipAntenna (B)SizeCode 3.2x1.6mm( ± 0.2mm) (C)MaterialHighKmaterial (D)Frequency2.4~2.5GHz (E)FeedingmodePIFA&SingleFeeding (F)AntennatypeType=0X WorkingFrequencyRange2400~2500MHz Bandwidth120MHz(Min.) PeakGain2.7dBi(Typ.) Impedance50Ohm Returnloss10dB(Min) PolarizationLinear AzimuthBeamwidthOmni-directional OperationTemperature( °C )-40~85 °C ResistancetoSolderingHeats 10sec.(@280 °C ) TerminationNi/Au(Leadless) Dimension(mm) L 3.20±0.20 W 1.60±0.20 T 0.45±0.20 咏成國際科技有限公司電話:13530576606 RAINInternationalTechnologyCo.,Ltd. 7/F,BuildingF,ZhichuangPark,Tong'an,Gushu,Shenzhen  2.4GHz3216ChipAntenna:RANT3216F245X02 _ 1 EvaluationBoardReference PCBDimensionAntennaLayoutReference Unit:mm ElectricalCharacteristics ReturnLoss&Radiation ReturnLoss Frequency(MHz) S11(dB) 2400-10.50 2450-30.62 2500-11.47 Radiation X Y Z 2.4GHz3216ChipAntenna:RANT3216F245X02 _ TapingSpecifications ReelandTapingSpecification ReelSpecification TYPESIZEABCD 32167”5K/Reel 9.0±0.5 60±213.5±0.5178±2 TappingSpecification PackagingTypeABWEFGHTψDP PaperType3216 1.90±0.203.50±0.208.0±0.201.75±0.103.5±0.054.0±0.102.0±0.050.75±0.10 1.50±0.10 4.0±0.1 2.4GHz3216ChipAntenna:RANT3216F245X02 _ ReliabilityTable TestItemProcedure Requirements CeramicType Remark (Reference) Electrical Characterization Fulfilltheelectrical specification UserSpec. Thermal Shock 1.Preconditioning: 50±10°C/1hr,thenkeepfor24±1hrsatroomtemp. 2.Initialmeasure:Spec:referInitialspec. 3.Rapidchangeoftemperaturetest: -30°Cto+85°C;100cycles; 15minutesatLowercategorytemperature; 15minutesatUppercategorytemperature. NoVisibleDamage. Fulfilltheelectrical specification. MIL-STD-202 107 Temperature Cycling 1.Initialmeasure:Spec:referInitialspec. 2.100Cycles(-30°Cto+85°C),SoakMode=1(2Cycle/hours). 3.Measurementat24±2Hoursaftertestcondition. NoVisibleDamage. Fulfilltheelectrical specification. JESD22 JA104 HighTemperature Exposure 1.Initialmeasure:Spec:referInitialspec. 2.Unpowered;500hours@T=+85°C. 3.Measurementat24±2hoursaftertest. NoVisibleDamage. Fulfilltheelectrical specification. MIL-STD-202 108 LowTemperature Storage 1.Initialmeasure:Spec:referInitialspec. 2.Unpowered:500hours@T=-30°C. 3.Measurementat24±2hoursaftertest. NoVisibleDamage. Fulfilltheelectrical specification. MIL-STD-202 108 Solderability (SMDBottomSide) Dippingmethod: a.Temperature:235±5°C b.Dippingtime:3±0.5s Thesoldershouldcover over95%ofthecritical areaofbottomside. IEC60384-21/22 4.10 SolderingHeat Resistance (RSH) Preheatingtemperature:150±10°C. Preheatingtime:1~2min. Soldertemperature:260±5°C. Dippingtime:5±0.5s NoVisibleDamage.IEC60384-21/22 4.10 Vibration5g'sfor20min.,12cycleseachof3orientations Note:Use8"X5"PCB.031"thick7securepointson,onelong sideand2securepointsatcornersofoppositesides.Parts mountedwithin2"fromanysecurepoint.Testfrom10-2000 Hz. NoVisibleDamage.MIL-STD-202 Method204 Mechanical Shock Threeshocksineachdirectionshallbeappliedalongthethree mutuallyperpendicularaxesofthetestspecimen(18shocks) Peakvalue:1,500g’s Duration:0.5ms Velocitychange:15.4ft/s Waveform:Half-sine NoVisibleDamage.MIL-STD-202 Method213 Humidity Bias 1.Humidity:85%R.H.,Temperature:85±2°C. 2.Time:500±24hours. 3.Measurementat24±2hrsaftertestcondition. NoVisibleDamage. Fulfilltheelectrical specification. MIL-STD-202 Method106 2.4GHz3216ChipAntenna:RANT3216F245X02 _ Board Flex (SMD) 1.Mountingmethod: IR-Reflow.PCBSize(L:100×W:40×T:1.6mm) 2.Applytheloadindirectionofthearrowuntilbendingreaches 2mm. NoVisibleDamage.AEC-Q200 005 AdhesionForceof1.8Kgfor60seconds.NoVisibleDamage Magnificationof20Xor greatermaybeemployed forinspectionofthe mechanicalintegrityofthe devicebodyterminalsand body/terminaljunction. AEC-Q200 006 Physical Dimension Anyapplicablemethodusingx10magnification,micrometers, calipers,gauges,contourprojectors,orothermeasuring equipment,capableofdeterminingtheactualspecimen dimensions. Inaccordancewith specification. JESD22 JB100 RevisionHistory RevisionDateContent 12019/03/01NewDatasheet 22020/02/22Add2Dradiationcharacteristic

ReportNo.:CISRR26032625701 Thetestresultsrelateonlytothetestedsamples. ThetestreportshouldnotbereproducedexceptinfullwithoutthewrittenapprovalofShenzhenBangce TestingTechnologyCo.,Ltd. Page1of56 TESTREPORT ReportNo.CISRR26032625701 ProjectNo.CISR260326257 FCCID2BVF4-A1 ApplicantAnhuiShengyunIntelligentTechnologyCo.,Ltd. Address Room120,B2#,HongfengZhiguPioneerPark,8HongfengRoad,High- techZone,HefeiCity,AnhuiProvince ManufacturerAnhuiShengyunIntelligentTechnologyCo.,Ltd. Address Room120,B2#,HongfengZhiguPioneerPark,8HongfengRoad,High- techZone,HefeiCity,AnhuiProvince ProductNameAISmartRecorder Trademark- Model/TypereferenceA1 ListedModel(s)- Standard 47CFRPart15.247 DateofsamplereceiptMarch28,2026 TestdateMarch28,2026toApril2,2026 IssuedateApril2,2026 TestresultComplied Reviewedby:LucasHuang Approvedby:HansHu ReportNo.:CISRR26032625701 Page 2 of 56 Contents 1.STANDARDANDAPPLICABLETESTMETHODS........................................................................................3 2.REPORTVERSION..........................................................................................................................................3 3.TESTDESCRIPTION.......................................................................................................................................4 4.SUMMARY........................................................................................................................................................5 4.1.ProductDescription*..................................................................................................................................5 4.2.RadioSpecificationDescription*..............................................................................................................5 4.3.ModificationofEUT.....................................................................................................................................6 4.4.Deviationfromstandards...........................................................................................................................6 4.5.TestingSite...................................................................................................................................................6 5.TESTCONFIGURATION.................................................................................................................................7 5.1.Testfrequencylist.......................................................................................................................................7 5.2.Descriptionsoftestmode...........................................................................................................................7 5.3.Testsampleinformation.............................................................................................................................7 5.4.Environmentalconditions...........................................................................................................................7 5.5.Statementofthemeasurementuncertainty.............................................................................................7 5.6.EquipmentUsedduringtheTest................................................................................................................8 6.TESTRESULTS.............................................................................................................................................10 6.1.EvaluationResults(Evaluation)...............................................................................................................10 6.1.1.AntennaRequirement............................................................................................................................10 6.2.RadioSpectrumMatterTestResults(RF)...............................................................................................11 6.2.1.ConductedEmissionatACpowerline.................................................................................................11 6.2.2.20dBBandwidth......................................................................................................................................14 6.2.3.MaximumConductedOutputPower.....................................................................................................16 6.2.4.ChannelSeparation................................................................................................................................17 6.2.5.NumberofHoppingFrequencies..........................................................................................................18 6.2.6.DwellTime...............................................................................................................................................19 6.2.7.Conductedbandedgeandspuriousemission...................................................................................21 6.2.8.Radiatedbandedgeemission...............................................................................................................23 6.2.9.RadiatedSpuriousEmission(below1GHz).........................................................................................29 6.2.10.RadiatedSpuriousEmission(Above1GHz)......................................................................................33 7.APPENDIXREPORT......................................................................................................................................41 7.1.ConductedOutputPower.........................................................................................................................41 7.2.20dBBandwidth.........................................................................................................................................43 7.3.NumberOfHoppingChannel...................................................................................................................45 7.4.CarrierFrequenciesSeparation...........................................................................…

Text truncated - open the document above for the full version.

ReportNo.:CISRR26032625701 Page 58 of 63 8.TESTSETUPPHOTOS ConductedEmissionatACpowerline Radiatedbandedgeemission RadiatedSpuriousEmission(Above1GHz) ReportNo.:CISRR26032625701 Page 59 of 63 RadiatedSpuriousEmission(below1GHz)