2BVIADM66Two Way Radio

1 Digital Two-Way Radio User Manual DM66 November 2025 Important Safety Precautions To ensure the safe and efficient use of this two-way radio, please read the following information carefully.  Explosive Atmospheres: Turn off the radio (and do not operate it) in potentially explosive atmospheres, such as gas stations, blasting areas, or locations containing detonators, to prevent possible ignition.  Environment: Do not expose the radio to excessive dust, moisture, or place it in unstable positions where it might fall.  Temperature: Avoid placing the radio near high-temperature sources or in direct sunlight.  Transmission: Avoid continuous transmission for extended periods. The radio may become hot, potentially causing skin burns or damage to the unit itself.  Connectors: When not in use, ensure the dust cover is closed for any connectors (e.g., charging port, headphone jack). 1  Cleaning: After prolonged use, the case and keys may become soiled. Clean them with a soft cloth dampened with a neutral cleanser solution. Do not use strong chemical solvents, such as paint thinners, alcohol, sprays, or petroleum-based cleansers, as they can damage the radio's surfaces and housing. Acknowledgment Thank you for choosing our brand of two-way radio. We are confident that this device will provide you with reliable, clear, and efficient communication. To help you fully understand the features, operation, and maintenance of this product, please read this manual thoroughly before use. Getting to Know Your Radio 1 Basic Operations Power On/Off Power On: Press and hold the Power button. The radio will power on, and you will hear a confirmation beep. If the voice prompt feature is enabled, the current channel number will be announced. Power Off: Press and hold the Power button to turn the radio off. Volume Adjustment Briefly press the Volume + button to increase the volume. Briefly press the Volume - button to decrease the volume. Channel Selection Press and hold the Channel + or Channel - button to switch channels. 16 channels are available for selection. Transmitting (Talk) Press and hold the [PTT] button. Speak clearly at a normal tone into the microphone. The red indicator light will illuminate while transmitting. Release the [PTT] button to stop transmitting and return to receive mode. Charging Use a 5V/1A power adapter and connect it to the radio's TYPE-C USB charging port using the provided cable. The status indicator will glow blue during charging. The indicator light will turn off once the battery is fully charged. 1 Technical Specifications General Specifications Frequency Range 400.000 – 470.000 MHz Number of Channels 16 Channels Antenna Impedance 50Ω Operating Temperature -0°C～+45°C Operating Voltage 4.2VDC（Max） Frequency Stability 0.5 ppm Weight Approx. 100g Dimensions (L x W x D) 134x55x27mm Receiving Section Sensitivity (Analog) 0.22μV (12dB SINAD) Sensitivity (Digital) 0.22μV (BER5%) Occupied Bandwidth ≤11KHz Adjacent Channel Selectivity 60dB @ 12.5KHz 1 Intermodulation 65dB @ 12.5KHz Audio Output Power 0.5W Audio Distortion ≤5% Current Consumption（Receive） Standby: 0-10mA Audio Output: ~480mA Transmitter Section RF Output Power 2W FM Modulation 11K0F3E @12.5KHz 4FSK Digital Modulation 7K60FXD (Data only) @ 12.5 kHz 7K60FXW (Data & Voice) @ 12.5 kHz Conducted/Radiated Spurious Emission -36dBm ＜1GHz -30dBm ＞1GHz Modulation Noise ＜40dB Audio Distortion (Modulation) ＜5% Modulation Limit ±2.5KHz @ 12.5KHz， Adjacent Channel Power 60dB @ 12.5KHz， Current Consumption (Transmit) ≤1.3A Disclaimer: Every effort has been made to ensure the accuracy and completeness of this manual. However, no responsibility is assumed for any errors or omissions that may exist. The company reserves the right to change product design and specifications without prior notice. 1 FCC STATEMENT: Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. RF Exposure Statement: SAR tests are conducted using standard operating positions accepted by FCC with the device transmitting at its highest certified power level in all tested frequency bands, although the SAR is determined at the highest certified power level, the actual SAR level of the device while operating can be well below the maximum value. Before a new model is an available for sale to the public, it must be tested and certified to the FCC that is does not exceed the exposure limit established by the FCC. Tests for each product are performed in positions and locations as required by the FCC. For body worn operation, this device has been tested and meets the FCC RF exposure guidelines when used with and accessory designated for this product or when used with and accessory that contains no metal. To maintain compliance with FCC RF exposure guidelines, hold the transmitter and antenna at least 1 inch (2.5 centimeters) from your face and speak in a normal voice, with the antenna pointed up and away from the face. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which …

Text truncated - open the document above for the full version.

2.911 (d)(7)USA Agent v1.2 Section 2.911(d)(7) USA Agent for Service of Process Company name: Shenzhen JieBao E-commerce Co., Ltd. Address: Room 701-8, 7th Floor, Jiangnan Building, No. 21 East Yongxiang Road, Ma'antang Community, Bantian Street, Longgang District, Shenzhen,China FCC ID: 2BVIADM66 Date: Mar. 17, 2026 2.911(d)(7) USA Designated Agent for Service of Process We, [Shenzhen JieBao E-commerce Co., Ltd. ] (“the applicant”) designate [Wedo Group] NOTE1 for the purpose of accepting service of process on behalf of the applicant. Applicant consent: We Acknowledge our consent to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and email address of the designated agent and acknowledge our acceptance of our obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. Agent obligation: We Acknowledge our obligation to accept service of process in the United States for matters related to the applicable equipment at our physical U.S. address and email address for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. USA Agent Company name: Wedo Group Address: 710 Arabian Ln Walnut, CA 91789, United States FRN：0037730611 Contact Name: Jeffrey Chen Telephone No: (323) 528-1888 Email: [email protected] Applicant Company name: Shenzhen JieBao E-commerce Co., Ltd. Address: Room 701-8, 7th Floor, Jiangnan Building, No. 21 East Yongxiang Road, Ma'antang Community, Bantian Street, Longgang District, Shenzhen,China FRN: 0038244232 Contact Name: Xiaofen Fang Telephone No: 13316515326 Email: [email protected] Signature: Signature:

Shenzhen JieBao E-commerce Co., Ltd. Room 701-8, 7th Floor, Jiangnan Building, No. 21 East Yongxiang Road, Ma'antang Community, Bantian Street, Longgang District, Shenzhen, China Attestation Statements Not Covered Entity Applicant & Not Covered Equipment To: Federal Communications Commission Date: Mar. 17, 2026 7435 Oakland Mills Road, Columbia, MD 21046, USA Ref: Information Required by Section 2.911(d)(5)(i) & (ii) FCC ID: 2BVIADM66 Shenzhen JieBao E-commerce Co., Ltd. (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List, established pursuant to § 1.50002 of reference chapter, as an entity producing “covered” communication equipment. The equipment for which authorization is sought is not “covered” telecommunications equipment and video surveillance equipment produced by entities identified on the Commission’s Covered List that prohibited from receiving an equipment authorization pursuant to section § 2.903 of the FCC rules. Sincerely yours, Name: Xiaofen Fang Title: Manager

Shenzhen JieBao E-commerce Co., Ltd. Room 701-8, 7th Floor, Jiangnan Building, No. 21 East Yongxiang Road, Ma'antang Community, Bantian Street, Longgang District, Shenzhen, China 1 / 2 Attestation Statements To: Federal Communications Commission Date: Mar. 17, 2026 7435 Oakland Mills Road, Columbia, MD 21046, USA Subject: Attestation of Compliance with FCC Covered List Software Requirements FCC ID: 2BVIADM66 Product Name: Two Way Radio This letter serves as an attestation that the equipment identified above ☐ is / ☒ is not (select one) "covered" software as defined under the Federal Communications Commission (FCC) Covered List requirements, as outlined in FCC 22-84 and KDB 986446. Specifically, the undersigned certifies that the equipment for which authorization is sought: 1. Does not contain cybersecurity or anti-virus software produced or provided by Kaspersky Lab, Inc. or any of its successors, assignees, parents, subsidiaries, affiliates, or any entity that has rebranded or relabeled software produced by the aforementioned entities. 2. Does not have the capability to store, run, or deliver any software identified on the FCC Covered List, including but not limited to cybersecurity and anti-virus software. To support this attestation, the appendix evaluation documentation has been prepared and is included in the certification filing. This attestation is based on a thorough evaluation of the device's design, functionality, and software environment. The undersigned affirms that the information provided is accurate and complete to the best of their knowledge. Sincerely yours, Name: Xiaofen Fang Title: Manager Shenzhen JieBao E-commerce Co., Ltd. Room 701-8, 7th Floor, Jiangnan Building, No. 21 East Yongxiang Road, Ma'antang Community, Bantian Street, Longgang District, Shenzhen, China 2 / 2 Evaluation regarding to the Covered List Software: Compliance Methodology Evaluation Process Results Device is Inherent compliance ☒ The Chipset(s) used is limited to run the Cybersecurity or anti-virus software. Compliance ☐ The Memory used is limited to run the Cybersecurity or anti-virus software. Compliance ☐ There is storage capacity limitation for store or install the Cybersecurity or anti-virus software. Compliance ☐ Operating system used is limited to run, install or deliver the Cybersecurity or anti-virus software. Compliance Device is not Inherent compliance ☐ Evaluation Based on Software Bill of Materials (SBoM) See attached “SBoM“ Note:The SBoM content is limited to the scope of covered list software (e.g. antivirus and cybersecurity software). ☐ Evaluation Based on Scan for Software on the device ☐ Evaluation Based on Filesystem scan ☐ Evaluation Based on Running software check

Shenzhen JieBao E-commerce Co., Ltd. Room 701-8, 7th Floor, Jiangnan Building, No. 21 East Yongxiang Road, Ma'antang Community, Bantian Street, Longgang District, Shenzhen, China Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: Mar. 17, 2026 Subject; Request for Confidentiality FCC ID: 2BVIADM66 To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Operational Description Parts List Tune-up Procedure In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s); External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: Xiaofen Fang Title: Manager

Shenzhen JieBao E-commerce Co., Ltd. Room 701-8, 7th Floor, Jiangnan Building, No. 21 East Yongxiang Road, Ma'antang Community, Bantian Street, Longgang District, Shenzhen,China Mar. 17, 2026 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Agent Authorization for FCC ID: 2BVIADM66 I, the undersigned, hereby authorize (Attestation of Global Compliance (Shenzhen) Co., Ltd) to act on our behalf in all matters relating to this application for equipment certification. Any act carried out by (Attestation of Global Compliance (Shenzhen) Co., Ltd) shall have the same effect as our own and I acknowledge that all responsibility for complying with the terms and conditions of certification, as specified by DERYCOM CERTIFICATION SERVICES, INC., still resides with Shenzhen JieBao E-commerce Co., Ltd. We certify that we are not subject to a denial of federal benefits that includes FCC benefits pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. §862, and that no party to the application, as defined in 47 CFR §1.2002(b), is subject to a denial of federal benefits that includes FCC benefits pursuant to that section. Sincerely, Full name of contact person listed on FCC’s website: Xiaofen Fang Title: Manager Tel: 13316515326 Email: [email protected]

Shenzhen JieBao E-commerce Co., Ltd. Room 701-8, 7th Floor, Jiangnan Building, No. 21 East Yongxiang Road, Ma'antang Community, Bantian Street, Longgang District, Shenzhen, China Date: Mar. 17, 2026 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Extended Frequencies Justification for Certification of Transmitter FCC ID: 2BVIADM66 Dear Sir/Madam, This transmitter was designed to operate in following frequency ranges 400-470Mhz To aid equipment authorization in other countries which accept the United States FCC Grant for Certification, Shenzhen JieBao E-commerce Co., Ltd. is requesting that the FCC lists the frequencies 400-470MHz, under FCC Rule Parts 90 on the FCC Grant. Shenzhen JieBao E-commerce Co., Ltd. attests that the Two Way Radio will not be marketed to USA users with the frequency band which is not allowed by the rule part 90. Per the FCC’s KDB634817 guidance, as an alternative to listing the exact frequencies, we acknowledge that it’s a violation of the FCC Rules if this device operates on unauthorized frequencies. Frequency Range FCC Rule Part 400-406MHz For Federal 406.1-450MHz FCC Part 90 450-454MHz FCC Part 90 456-460MHz FCC Part 90 460-462.5375MHz FCC Part 90 462.7375-467.5375MHz FCC Part 90 467.7375-470MHz FCC Part 90 Also, equipment programming is the responsibility of Authorized Service Personnel, the Two Way Radio complies with 47 CFR Part 90.203(e), in that the operator cannot directly program the transmit frequencies using the normally accessible external controls. Please contact me if you require any additional information. Sincerely Yours, Signature: Name: Xiaofen Fang Title: Manager

Shenzhen JieBao E-commerce Co., Ltd. Room 701-8, 7th Floor, Jiangnan Building, No. 21 East Yongxiang Road, Ma'antang Community, Bantian Street, Longgang District, Shenzhen, China Date: Mar. 17, 2026 FCC Part 90 Letter FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Declaration of compliance to the requirements of §90.203 FCC ID: 2BVIADM66 Dear Sir/Madam, We, Shenzhen JieBao E-commerce Co., Ltd. acknowledge that this device will not be marketed to USA users with the frequency band which is not allowed by rule part 90.and it is a violation of FCC rules if this device is operated on unauthorized frequencies inside the U.S.A. This equipment meets the requirements of the FCC Rules, Parts 90.203(e) and (g), as applicable. Programming of this product transmit frequencies can be performed ONLY by the manufacturer or by service or by maintenance personal. The operator can’t program transmit frequencies using the equipment’s external operation controls. This is to certify that the requirements of 47 CFR Part 90.203(j)(4) and (5) spectrum efficiency are met by the Shenzhen JieBao E-commerce Co., Ltd. demonstrated by the tests conducted on the sample radio provided. The tests show that the 4FSK data rate is in accordance with ETSI TS 102 361-1, that is 9600 bits per second in a 12.5 kHz bandwidth to satisfy the data rate requirement of 4800 bits per second per 6.25 kHz of channel bandwidth (7K60F1D emissions). Additionally, the radio uses the AMBE+2 half-rate vocoder to compress 60 ms of normal bursts are sent in alternate 30 ms TDMA slots and so comply with the equivalence of one voice channel per 6.25 kHz bandwidth (7K60F1W emission). Additionally, the radio also meets the requirement of one voice channel per 12.5 kHz of channel bandwidth for analogue speech (11k0F3E emission). Sincerely Yours, Signature: Name: Xiaofen Fang Title: Manager

Report No.: AGC17309260101AP02 Page 1 of 4 EXTERNAL PHOTOS All VIEW OF EUT TOP VIEW OF EUT Report No.: AGC17309260101AP02 Page 2 of 4 BOTTOM VIEW OF EUT FRONT VIEW OF EUT Report No.: AGC17309260101AP02 Page 3 of 4 BACK VIEW OF EUT LEFT VIEW OF EUT Report No.: AGC17309260101AP02 Page 4 of 4 RIGHT VIEW OF EUT PORT-1 VIEW OF EUT ****************************************End of Report*************************************

FCC ID Label Location 10mm*50mm FCC ID: 2BVIADM66

Report No.: AGC17309260101AP02 Page 1 of 4 INTERNAL PHOTOS Open View-1 of EUT Battery View of EUT Report No.: AGC17309260101AP02 Page 2 of 4 Internal View-1 of EUT Internal View-2 of EUT UHF Antenna Report No.: AGC17309260101AP02 Page 3 of 4 Internal View-3 of EUT Internal View-4 of EUT Report No.: AGC17309260101AP02 Page 4 of 4 Internal View-5 of EUT Internal View-6 of EUT ****************************************End of Report*************************************

Page 1 of 42 SAR Test Report Report No.: AGC17309260101FH01 FCC ID : 2BVIADM66 PRODUCT DESIGNATION : Two Way Radio BRAND NAME : Vineyuan MODEL NAME : DM66 APPLICANT : Shenzhen JieBao E-commerce Co., Ltd. DATE OF ISSUE : Mar. 17, 2026 STANDARD(S) : IEEE Std. 1528:2013 FCC 47 CFR Part 2§2.1093 IEEE Std C95.1 ™-2019 REPORT VERSION : V1.0 Attestation of Global Compliance(Shenzhen) Co., Ltd. Report No.: AGC17309260101FH01 Page 2 of 42 Report Revise Record Report Version Revise Time Issued Date Valid Version Notes V1.0 / Mar. 17, 2026 Valid Initial Release Report No.: AGC17309260101FH01 Page 3 of 42 Test Report Applicant Name Shenzhen JieBao E-commerce Co., Ltd. Applicant Address Room 701-8, 7th Floor, Jiangnan Building, No. 21 East Yongxiang Road, Ma'antang Community, Bantian Street, Longgang District, Shenzhen, China Manufacturer Name Shenzhen JieBao E-commerce Co., Ltd. Manufacturer Address Room 701-8, 7th Floor, Jiangnan Building, No. 21 East Yongxiang Road, Ma'antang Community, Bantian Street, Longgang District, Shenzhen, China Factory Name Shenzhen JieBao E-commerce Co., Ltd. Factory Address Room 701-8, 7th Floor, Jiangnan Building, No. 21 East Yongxiang Road, Ma'antang Community, Bantian Street, Longgang District, Shenzhen, China Product Designation Two Way Radio Brand Name Vineyuan Test Model DM66 Series Model N/A Declaration of Difference N/A EUT Voltage DC 3.7V Applicable Standard IEEE Std. 1528:2013 FCC 47 CFR Part 2§2.1093 IEEE Std C95.1 ™-2019 Date of receipt of test item Jan. 04, 2026 Test Date Jan. 22, 2026 Report Template AGCRT- US -PTT/SAR (2021-04-20) Note: The results of testing in this report apply to the product/system which was tested only. Prepared By Bibo Zhang (Project Engineer) Mar. 17, 2026 Reviewed By Jack Gui (Reviewer) Mar. 17, 2026 Approved By Angela Li (Authorized Officer) Mar. 17, 2026 Report No.: AGC17309260101FH01 Page 4 of 42 TABLE OF CONTENTS 1. SUMMARY OF MAXIMUM SAR VALUE ......................................................................................................... 5 2. GENERAL INFORMATION ............................................................................................................................... 6 2.1. EUT DESCRIPTION......................................................................................................................................... 6 3. SAR MEASUREMENT SYSTEM ........................................................................................................................ 7 3.1. THE DASY5 SYSTEM USED FOR PERFORMING COMPLIANCE TESTS CONSISTS OF FOLLOWING ITEMS .................... 7 3.2. DASY5 E-FIELD PROBE ................................................................................................................................. 8 3.3. DATA ACQUISITION ELECTRONICS DESCRIPTION ............................................................................................... 8 3.4. ROBOT .......................................................................................................................................................... 9 3.5. LIGHT BEAM UNIT .......................................................................................................................................... 9 3.6. DEVICE HOLDER .......................................................................................................................................... 10 3.7. MEASUREMENT SERVER ............................................................................................................................... 10 3.8. PHANTOM ................................................................................................................................................. 11 4. SAR MEASUREMENT PROCEDURE ............................................................................................................ 12 4.1. SPECIFIC ABSORPTION RATE (SAR) .............................................................................................................. 12 4.2. SAR MEASUREMENT PROCEDURE ................................................................................................................ 13 5. TISSUE SIMULATING LIQUID ....................................................................................................................... 15 5.1. THE COMPOSITION OF THE TISSUE SIMULATING LIQUID..................................................................................... 15 5.2. TISSUE DIELECTRIC PARAMETERS FOR HEAD AND BODY PHANTOMS ............................................................... 15 5.3. TISSUE CALIBRATION RESULT ....................................................................................................................... 16 6. SAR SYSTEM CHECK PROCEDURE ........................................................................................................... 17 6.1. SAR SYSTEM CHECK PROCEDURES ............................................................................................................. 17 6.2. SAR SYSTEM CHECK ................................................................................................................................... 18 7. EUT TEST POSITION ...................................................................................................................................... 19 7.1. BODY WORN POSITION ................................................................................................................................ 19 8. SAR EXPOSURE LIMITS ............................................................................................................................... 20 9. TEST FACILITY .............................................................................................................................................. 21 10. TEST EQUIPMENT LIST .............................................................................................................................. 22 11. MEASUREMENT UNCERTAINTY ...…

Text truncated - open the document above for the full version.

Page 1 of 18 CALIBRATION DATA PROBE CALIBRATION DATA Page 2 of 18 Page 3 of 18 Page 4 of 18 Page 5 of 18 Page 6 of 18 Page 7 of 18 Page 8 of 18 Page 9 of 18 Page 10 of 18 DAE CALIBRATION DATA Page 11 of 18 Page 12 of 18 Page 13 of 18 DIPOLE CALIBRATION DATA Page 14 of 18 Page 15 of 18 Page 16 of 18 Page 17 of 18 Page 18 of 18

Page 1 of 62 FCC Test Report FCC ID : 2BVIADM66 APPLICATION PURPOSE : Original Equipment PRODUCT DESIGNATION : Two Way Radio BRAND NAME : Vineyuan MODEL NAME : DM66 APPLICANT : Shenzhen JieBao E-commerce Co., Ltd. DATE OF ISSUE : Mar. 17, 2026 STANDARD(S) : FCC Part 90 Subpart I REPORT VERSION : V1.0 Attestation of Global Compliance (Shenzhen) Co., Ltd Report No.: AGC17309260101FR01 Report No.: AGC17309260101FR01 Page 2 of 62 Report Revise Record Report Version Revise Time Issued Date Valid Version Notes V1.0 / Mar. 17, 2026 Valid Initial Release Report No.: AGC17309260101FR01 Page 3 of 62 Table of Contents 1. General Information ........................................................................................................................................ 5 2. Product Information ........................................................................................................................................ 6 2.1 Product Technical Description ................................................................................................................... 6 2.2 Test Frequency List ................................................................................................................................... 7 2.3 Related Submittal(S) / Grant (S) ............................................................................................................... 8 2.4 Test Methodology ...................................................................................................................................... 8 2.5 Calculation of Emission Indicators ............................................................................................................ 8 2.6 Special Accessories .................................................................................................................................. 8 2.7 Equipment Modifications ........................................................................................................................... 8 3. Test Environment ............................................................................................................................................ 9 3.1 Address of The Test Laboratory ................................................................................................................ 9 3.2 Test Facility ................................................................................................................................................ 9 3.3 Environmental Conditions ....................................................................................................................... 10 3.4 Measurement Uncertainty ....................................................................................................................... 10 3.5 List of Equipment Used ........................................................................................................................... 11 4.System Test Configuration ............................................................................................................................ 12 4.1 EUT Configuration ................................................................................................................................... 12 4.2 EUT Exercise ........................................................................................................................................... 12 4.3 Configuration of Tested System .............................................................................................................. 12 4.4 Equipment Used in Tested System ......................................................................................................... 12 4.5 Summary of Test Results ........................................................................................................................ 13 5. Description of Test Modes ..........................................…

Text truncated - open the document above for the full version.