2BVIH-SCANM3UPScanMaster 3 Upright

Date: 04-23-2026 To: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Ref: Attestation Statements Part 2.911(d)(5)(i) and Part 2.911(d)(5)(ii) Filing Re. KDB 986446 D01 FCC ID: 2BVIH -SCANM3UP Dear Sir or Madam, ITAB Shop Products AB certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. We also certify that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. We further attest that the equipment for which authorization is sought does not contain, nor will it ever contain, integrated Kaspersky cybersecurity and/or anti-virus software produced by Kaspersky Lab Inc. or any of its successors and assignees. If you have any questions, please contact us. Sincerely, Contact name: Fredrik Roos Company name: ITAB Shop Products AB Address: Instrumentvägen 2, SE-550 09 Jönköping, Sweden E-mail: [email protected] Tel: +46 36 31 73 00

ITAB SHOP PRODUCTS AB Date 24/04/2026 TUV SUD America Inc. 10 Centennial Drive Peabody, MA 01960, USA Dear Sir or Madam, We, ITAB Shop Products AB, hereby authorize Benjamin Puls and Christoph Drobek of TÜV SÜD Product Service GmbH, Äußere Frühlingstraße 45, 94315 Straubing, Germany to act as our agent in all matters relating to applications for equipment authorization, including the signing of all documents relating to these matters. Yours sincerely, Name: Fredrik Roos Title: Compliance & Test Specialist

Date 24/04/2026) Federal Communications Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 Confidentiality Request FCC ID: 2BVIH -SCANM3UP Pursuant to Sections 0.457(d)(1)(ii) and 0.459 of the Commission’s Rules, ITAB Shop Products AB hereby requests permanent confidential treatment of information accompanying this application as outlined below: Schematics Bill of Materials/Parts List Block Diagrams Theory of Operation ITAB Shop Products AB also hereby requests short-term confidential treatment of information accompanying this application as outlined below for a period of period of 100 days: Internal Photos External Photos User Manual Test Set-up Photographs The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457(d)(1)(ii), disclosure of this Application and all accompanying materials will not be made before the date of the Grant for this Application. Yours sincerely, Name: Fredrik Roos Title: Compliance & Test Specialist

Figure 1: Sample Label and Location

Trade Register Munich HRB 85742 VAT ID No. DE129484267 Information pursuant to Section 2(1) DL-InfoV (Germany) at www.tuvsud.com/imprint Managing Directors: Wolfgang Hübl (Sprecher / CEO) Karl Meier Patrick van Welij Phone: +49 (0) 9421 56 82-0 Fax: +49 (0) 9421 56 82-199 www.tuvsud.com TÜV SÜD Product Service GmbH Äußere Frühlingstraße 45 94315 Straubing Germany TÜV SÜD Product Service Report on the FCC and IC Testing of the ITAB Shop Products AB Model: ScanMaster 3 Upright In accordance with FCC 47 CFR, Part 1, § 1.1307, 1.1310 and ISED RSS-102 Prepared for: ITAB Shop Products AB Instrumentvägen 2, 553 02 Jönköping Sweden FCC ID: 2BVIH -SCANM3UP IC: 35336-SCANM3UP COMMERCIAL-IN-CONFIDENCE Date: 2026-04-16 Document Number: TR-713386411-04 | Revision: 0 RESPONSIBLE FOR NAME DATE SIGNATURE Testing Michael Ingerl 2026-04-16 SIGN-ID 1122062 Authorised Signatory Alexander Grill 2026-04-16 SIGN-ID 1122129 Signatures in this approval box have checked this document in line with the requirements of TÜV SÜD Product Service document control rules. Engineering Statement: This measurement shown in this report were made in accordance with the procedures described on test pages. All reporded testing was carried out on a sample equipment to demonstrate limited compliance with with FCC 47 CFR Part 1, § 1.1307: 2021, FCC 47 CFR, Part 1, § 1.1310: 2020 and ISED RSS-102, Issue 6: 2023. The sample tested was found to comply with the requirements in the tested parts Laboratory Accreditation DAkkS Reg. No. D-PL-11321-11-03 DAkkS Reg. No. D-PL-11321-11-04 Laboratory recognition Registration No. BNetzA-CAB-16/21-15 Industry Canada test site registration 3050A-2 DISCLAIMER AND COPYRIGHT This non-binding report has been prepared by TÜV SÜD Product Service with all reasonable skill and care. The document is confidential to the potential Client and TÜV SÜD Product Service. No part of this document may be reproduced without the prior written approval of TÜV SÜD Product Service. © 2026 TÜV SÜD Product Service. Document Number: TR-713386411-04 | Revision: 0 COMMERCIAL-IN-CONFIDENCE COMMERCIAL-IN-CONFIDENCE Page 1 of 13 Content 1 Report Summary.............................................................................................................................. 2 1.1 Modification Report ................................................................................................................ 2 1.2 Introduction ............................................................................................................................. 2 1.3 Brief Summary of Results ...................................................................................................... 3 1.4 Product Information ................................................................................................................ 4 1.5 EUT Modifications Record ..................................................................................................... 5 1.6 Test Location .......................................................................................................................... 5 2 Test Details ...................................................................................................................................... 6 2.1 RF Exposure Exemption ........................................................................................................ 6 3 Measurement Uncertainty ............................................................................................................. 12 Document Number: TR-713386411-04 | Revision: 0 COMMERCIAL-IN-CONFIDENCE COMMERCIAL-IN-CONFIDENCE Page 2 of 13 1 Report Summary 1.1 Modification Report Alternations and additions of this report will be issued to the holders of each copy in the form of a com- plete document. (Current version replaces all previous editions) Revision Description of changes Date of Issue 0 First Issue 2026-04-16 Table 1: Report of Modifications 1.2 Introduction Applicant ITAB Shop Products AB Manufacturer ITAB Shop Products AB Model Number(s) ScanMaster 3 Upright Serial Number(s) 1099524440037 Hardware Version(s) --- Software Version(s) Version 4.3.0 (GCB) Version 2.2.0 (Edge board) Number of Samples Tested 1 Test Specification(s) / Issue / Date FCC 47 CFR, Part 1, § 1.1307: 2021, FCC 47 CFR, Part 1, § 1.1310: 2020, ISED RSS-102, Issue 6: 2023 Test Plan/Issue/Date --- Order Number 8227044-1 Date of Receipt of EUT 2026-01-07 Start of Test 2026-01-13 Finish of Test 2026-01-14 Name of Engineer(s) Michael Ingerl Related Document(s) ANSI C63.10:2020 KDB 447498 D04 Interim General RF Exposure Guidance v01 Document Number: TR-713386411-04 | Revision: 0 COMMERCIAL-IN-CONFIDENCE COMMERCIAL-IN-CONFIDENCE Page 3 of 13 1.3 Brief Summary of Results A brief summary of the tests carried out in accordance with FCC 47 CFR, Part 1, § 1.1307, 1.1310 and ISED RSS-102 is shown below. Section Specification Clause Test Description Result 2.1 § 1.1307(b)(3) RF Exposure Exemption Pass Table 2: Results according to FCC 47 CFR, Part 1 Section Specification Clause Test Description Result 2.1 5.3.2 RF Exposure Exemption Pass Table 3: Results according to ISED RSS-102 Document Number: TR-713386411-04 | Revision: 0 COMMERCIAL-IN-CONFIDENCE COMMERCIAL-IN-CONFIDENCE Page 4 of 13 1.4 Product Information 1.4.1 Technical Description Frequency Band: 902 MHz to 928 MHz Operating Channel Width: 110 kHz Nominal Operating Fre- quencies: Channel Mode Frequency [MHz] Low Tx 902.5 Mid Tx 914.5 High Tx 927.5 Type of Antenna: Internal Antenna Supply Voltage: 24 V Supply Frequency: 0 Hz (DC) 1.4.2 Test Configuration The EUT was 24 V DC power supplied 1.4.3 Test Configuration Transmitting on lowest, middle and highest frequency channel Document Number: TR-713386411-04 | Revision: 0 COMMERCIAL-IN-CONFIDENCE COMMERCIAL-IN-CONFIDENCE Page 5 of 13 1.5 EUT Modifications Record The table below details modifications made to the EUT during the test program. The modifications incorporated during ea…

Text truncated - open the document above for the full version.

Disclosure of any part of this document is regulated by agreements between the discloser and Sigma Connectivity Group AB, or its subsidiaries, based on the information security classification of this document. Status: Date: Revision: Approved 2025-11-27 1.0 Last modified by: Approved by: Page: Da Silva Frazao André Felicetta Di Monda 1(13) Confidential Characterization of the ISM Antenna for ITAB ID: SCDC-1541860587-23782 Title ID Characterization of the ISM Antenna for ITAB SCDC-1541860587-23782 Last modified by Status Date Rev. Da Silva Frazao André Approved 2025-11-27 1.0 Disclosure of any part of this document is regulated by agreements between the discloser and Sigma Connectivity Group AB, or its subsidiaries, based on the information security classification of this document. Page 2(13) Confidential Table of Contents 1 Revisions ......................................................................................................... 3 2 Characterisation of Antennas .......................................................................... 4 2.1 Antenna and Antenna Matching Network ........................................................................ 4 2.2 Antenna Chamber Description .......................................................................................... 4 2.3 Stargate 24L Measurement Equipment ............................................................................ 6 2.4 Setup of the DUT in the SG24L Chamber .......................................................................... 7 2.5 Measurement Results ........................................................................................................ 8 2.5.1 3D Radiation Pattern and 2D-cuts for 867MHz ........................................................................ 8 2.5.2 3D Radiation Patterns and 2D-cuts for 902MHz, 915MHz, 928MHz ...................................... 11 Title ID Characterization of the ISM Antenna for ITAB SCDC-1541860587-23782 Last modified by Status Date Rev. Da Silva Frazao André Approved 2025-11-27 1.0 Disclosure of any part of this document is regulated by agreements between the discloser and Sigma Connectivity Group AB, or its subsidiaries, based on the information security classification of this document. Page 3(13) Confidential 1 Revisions Revision Updates Author Date 0.1 Creation of the document André da Silva Frazão November 24 2025 1.0 Reviewed and approved content André da Silva Frazão November 26 2025 Title ID Characterization of the ISM Antenna for ITAB SCDC-1541860587-23782 Last modified by Status Date Rev. Da Silva Frazao André Approved 2025-11-27 1.0 Disclosure of any part of this document is regulated by agreements between the discloser and Sigma Connectivity Group AB, or its subsidiaries, based on the information security classification of this document. Page 4(13) Confidential 2 Characterisation of Antennas ITAB requested Sigma Connectivity AB (Lund, Sweden) to characterize the efficiency and gain of an ISM and EU equivalent antenna placed on a fully populated PCB (PBA). The operational bandwidths are ~867MHz and 902-928 MHz respectively. 2.1 Antenna and Antenna Matching Network Only one antenna is present on the PBA and the antenna is a copper trace on the FR4 substarte with a feed only, see picture 8 below. Between the radio and the antenna a Pi-type matching network. See the schematics in picture 1 below. Picture 1: Schematics of the antenna matching network and the values of the matching components. 2.2 Antenna Chamber Description The chamber used for the measurements is SG 24L from MVG (MVG - Microwave Vision Group). The application-software WaveStudio version 25.3.0 used was. Picture 2: SG24L control software, version 25.3.0. Title ID Characterization of the ISM Antenna for ITAB SCDC-1541860587-23782 Last modified by Status Date Rev. Da Silva Frazao André Approved 2025-11-27 1.0 Disclosure of any part of this document is regulated by agreements between the discloser and Sigma Connectivity Group AB, or its subsidiaries, based on the information security classification of this document. Page 5(13) Confidential Picture 3: Serial number of the SG24L system and the compliance date after the delivery and installation of said system. The annual calibration, performed by MVG personal, was performed June 5 2025. Annual calibration technical document, MATR.155.15.25.PAR.A. Chamber orientation as shown below. Title ID Characterization of the ISM Antenna for ITAB SCDC-1541860587-23782 Last modified by Status Date Rev. Da Silva Frazao André Approved 2025-11-27 1.0 Disclosure of any part of this document is regulated by agreements between the discloser and Sigma Connectivity Group AB, or its subsidiaries, based on the information security classification of this document. Page 6(13) Confidential Picture 4: SG24L coordinate orientation. 2.3 Stargate 24L Measurement Equipment For the antenna characterization the following measurement equipment was used. VNA Agilent Technologies E5071C ENA series. This VNA had an accredited calibration done in 2025 July 29. Picture 5: The VNA used for the measurements and its calibration date. Title ID Characterization of the ISM Antenna for ITAB SCDC-1541860587-23782 Last modified by Status Date Rev. Da Silva Frazao André Approved 2025-11-27 1.0 Disclosure of any part of this document is regulated by agreements between the discloser and Sigma Connectivity Group AB, or its subsidiaries, based on the information security classification of this document. Page 7(13) Confidential 2.4 Setup of the DUT in the SG24L Chamber The placement of the DUT is with a spacer in order to be in the origo of the measurement system. The orientation of the PBA is as follows according to the anechoic chamber’s coordinate system (see picture 4 above): Picture 6: DUT placement in the chamber. Picture 7: DUT placement in the chamber. Picture 8: PCB assembly with antenna under test. Title ID Characterization of the ISM Antenna for ITAB SCDC-1541860587-23…

Text truncated - open the document above for the full version.

Trade Register Munich HRB 85742 VAT ID No. DE129484267 Information pursuant to Section 2(1) DL-InfoV (Germany) at www.tuvsud.com/imprint Managing Directors: Wolfgang Hübl (Sprecher / CEO) Karl Meier Patrick van Welij Phone: +49 9421 5682-0 Fax: +49 9421 5682-199 www.tuvsud.com/ps Äußere Frühlingstraße 45 94315 Straubing Germany TÜV SÜD Product Service RESPONSIBLE FOR NAME DATE SIGNATURE Project Management Michael Ingerl 2026-04-16 SIGN-ID 1122063 Authorised Signatory Alexander Grill 2026-04-16 SIGN-ID 1122126 Signatures in this approval box have checked this document in line with the requirements of TÜV SÜD Product Service document control rules. ENGINEERING STATEMENT The measurements shown in this report were made in accordance with the procedures described on test pages. All reported testing was carried out on a sample equipment to demonstrate limited compliance with FCC 47 CFR Part 15C and ISED Canada RSS-210 and ISED Canada RSS-GEN. The sample tested was found to comply with the requirements defined in the applied rules. RESPONSIBLE FOR NAME DATE SIGNATURE Testing Michael Ingerl 2026-04-16 SIGN-ID 1122063 Laboratory Accreditation DAkkS Reg. No. D-PL-11321-11-02 DAkkS Reg. No. D-PL-11321-11-03 Laboratory recognition Registration No. BNetzA-CAB-16/21- 15 ISED Canada test site registration 3050A-2 EXECUTIVE SUMMARY A sample of this product was tested and found to be compliant with FCC 47 CFR Part 15 C 2023, ISED RSS-210 Issue 11, 2024 and ISED RSS-Gen Issue 5, 2018 + A1:2019 + A2:2021. Report on the FCC and IC Testing of the ITAB Shop Products AB Model: ScanMaster 3 Upright In accordance with FCC 47 CFR Part 15C, ISED Canada RSS-210 and ISED Canada RSS-GEN Prepared for: ITAB Shop Products AB Instrumentvägen 2, 553 02 Jönköping Sweden FCC ID: 2BVIH -SCANM3UP IC: 35336-SCANM3UP COMMERCIAL-IN-CONFIDENCE Date: 2026-04-16 Document Number: TR-713386411-03 | Revision: 0 DISCLAIMER AND COPYRIGHT This non-binding report has been prepared by TÜV SÜD Product Service with all reasonable skill and care. The document is confidential to the potential Client and TÜV SÜD Product Service. No part of this document may be reproduced without the prior written approval of TÜV SÜD Product Service. © 2026 TÜV SÜD Product Service. Document Number: TR-713386411-03 | Revision: 0 COMMERCIAL-IN-CONFIDENCE COMMERCIAL-IN-CONFIDENCE Page 1 of 49 Contents 1 Report Summary ........................................................................................................ 2 1.1 Report Modification Record .......................................................................................... 2 1.2 Introduction .................................................................................................................. 2 1.3 Brief Summar of Results ............................................................................................... 3 1.4 Basic information of EUT .............................................................................................. 4 1.5 EUT Modification Record .............................................................................................. 5 1.6 Test Location ................................................................................................................ 5 2 Test Setup ................................................................................................................... 6 2.1 Radiated Emission in Fully or Semi Anechoic Room .................................................... 6 2.2 Radiated Emission at Alternative Test Site ................................................................... 8 3 Test Details ............................................................................................................... 10 3.1 Spurious Emissions .................................................................................................... 10 3.2 Restricted Band Edges ............................................................................................... 26 3.3 Emission Bandwidth ................................................................................................... 28 3.4 Transmitter frequency stability .................................................................................... 36 3.5 Antenna requirement .................................................................................................. 39 3.6 Conducted Disturbance at Mains Terminals ............................................................... 41 4 Measurement Uncertainty ........................................................................................ 46 Annex A: Test Setup Photos Annex B: External Photos Annex C: Internal Photos Document Number: TR-713386411-03 | Revision: 0 COMMERCIAL-IN-CONFIDENCE COMMERCIAL-IN-CONFIDENCE Page 2 of 49 1 Report Summary 1.1 Report Modification Record Alterations and additions to this report will be issued to the holders of each copy in the form of a complete document. (Current version replaces all previous editions) Revision Description of Change Date of Issue 0 First Issue 2026-04-16 Table 1 1.2 Introduction Applicant ITAB Shop Products AB Manufacturer ITAB Shop Products AB Model Number(s) ScanMaster 3 Upright Serial Number(s) 1099524440037 Hardware Version(s) --- Software Version(s) Version 4.3.0 (GCB) Version 2.2.0 (Edge board) Number of Samples Tested 1 Test Specification/Issue/Date FCC 47 CFR Part 15 C 2023, ISED RSS-210 Issue 11, 2024 and ISED RSS-Gen Issue 5, 2018 + A1:2019 + A2:2021 Test Plan/Issue/Date --- Order Number 8227044-1 Date of Receipt of EUT 2026-01-07 Start of Test 2026-01-13 Finish of Test 2026-03-09 Name of Engineer(s) Michael Ingerl, Dennis Toth Related Document(s) ANSI C63.10:2020 Document Number: TR-713389791-02 | Revision: 0 COMMERCIAL-IN-CONFIDENCE COMMERCIAL-IN-CONFIDENCE Page 3 of 49 1.3 Brief Summar of Results A brief summary of the tests carried out in accordance with FCC 47 CFR Part 15C and ISED Canada RSS-210 and ISED Canada RSS-GEN is shown below. Section Sp…

Text truncated - open the document above for the full version.