2BVIP-BRRC1DMBKRemote control

Remote
Control
User
Manual
1
P roduct
P hysical
I mage
2
P roduct
S pecifications
Item
Description
Item
Description
Product
Model
Remote
Controller
Operating
Voltage
3.7V
Product
Weight
252±5g
Operating
Current
<100mA
Product
Dimensions
L215.5W127.9H54.5mm
Shutdown
Current
<15uA
Product
Color
Main
Color:
Black
Battery
Capacity
3.7V/800mAh
Operating
Temperature
0°C
to
60°C
Charging
Voltage/Current
5V/1A
Storage
Temperature
-20°C
to
60°C
Charging
Current
≤500mA
3
B asic
P roduct
F unction
I ntroduction
3.1
Product
Key
Definitions
3.2
Function
Introduction
This
Remote
control
adopts
a
dual-link
wireless
architecture,
including
a
Bluetooth
communication
link
and
a
remote
control
link.
The
two
links
have
independent
functions
and
clear
division
of
labor,
ensuring
system
reliability
and
ease
of
use.
• The
Bluetooth
communication
link
is
mainly
used
for
firmware
program
upgrade
and
remote
control
parameter
configuration,
supporting
parameter
reading/writing,
firmware
downloading
and
version
updating,
to
realize
device
function
iteration
and
flexible
parameter
configuration.
• The
remote
control
link
is
dedicated
to
real-time
delivery
of
remote
control
commands,
undertaking
robot
motion
control
functions,
including
stable
transmission
of
key
control
commands
such
as
robot
forward,
backward,
left/right
steering
and
state
switching.
4
P ower
O n/Off
a nd
C harging
F unctions
4.1
Power
On/Off
Functions
• Power
On
:
Long
press
the
Home
button
for
5
seconds
to
turn
on
the
device;
all
indicators
LED1,
LED2,
LED3,
and
LED4
light
up
simultaneously
when
powered
on;
LED1
remains
on
after
successful
startup.
• Power
Off
:
Long
press
the
Home
button
for
5
seconds
to
turn
off
the
device;
LED1,
LED2,
LED3,
and
LED4
flash
synchronously
during
shutdown;
all
indicators
turn
off
after
successful
shutdown.
4.2
Charging
Functions
• When
the
battery
is
low:
LED2
flashes
to
remind.
• During
charging:
LED2
keeps
flashing.
• When
the
battery
is
fully
charged:
LED2
turns
to
constant
on.
FCC
Warning


This
device
complies
with
Part
15
of
the
FCC
Rules.
Operation
is
subject
to
the
following
two
conditions:
(1)
This
device
may
not
cause
harmful
interference,
and
(2)
this
device
must
accept
any
interference
received,
including
interference
that
may
cause
undesired
operation.


NOTE
1:
This
equipment
has
been
tested
and
found
to
comply
with
the
limits
for
a
Class
B
digital
device,
pursuant
to
part
15
of
the
FCC
Rules.
These
limits
are
designed
to
provide
reasonable
protection
against
harmful
interference
in
a
residential
installation.
This
equipment
generates,
uses
and
can
radiate
radio
frequency
energy
and,
if
not
installed
and
used
in
accordance
with
the
instructions,
may
cause
harmful
interference
to
radio
communications.
However,
there
is
no
guarantee
that
interference
will
not
occur
in
a
particular
installation.
If
this
equipment
does
cause
harmful
interference
to
radio
or
television
reception,
which
can
be
determined
by
turning
the
equipment
off
and
on,
the
user
is
encouraged
to
try
to
correct
the
interference
by
one
or
more
of
the
following
measures:
-Reorient
or
relocate
the
receiving
antenna.
-Increase
the
separation
between
the
equipment
and
receiver.
-Connect
the
equipment
into
an
outlet
on
a
circuit
different
from
that
to
which
the
receiver
is
connected.
-Consult
the
dealer
or
an
experienced
radio/TV
technician
for
help.


NOTE
2:
Any
changes
or
modifications
to
this
unit
not
expressly
approved
by
the
party
responsible
for
compliance
could
void
the
user's
authority
to
operate
the
equipment.


The
device
has
been
evaluated
to
meet
general
RF
exposure
requirement.
The
device
can
be
used
in
portable
exposure
condition
without
restriction.

Rev 1/26/2023 Booster Robotics Technology Co., Ltd Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 04-11-2026 Ref: Attestation Statements Part 2.911(d)(5)(i) Filing FCC ID: 2BVIP-BRRC1DMBK [Booster Robotics Technology Co., Ltd] certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. [Booster Robotics Technology Co., Ltd] certifies that the equipment for which authorization is sought does not include cybersecurity or anti-virus software produced or provided by Kaspersky Lab, Inc. or any of its successors and assignees, including equipment with integrated Kaspersky Lab, Inc. (or any of its successors and assignees) cybersecurity or anti-virus software pursuant to DA-24-886 and KDB 986446 D01 Covered Equipment Guidance section B(2a). Device is inherently compliant based on hardware limitations or software controls. or A Software Bill of Materials (SBOM) is provided to the TCB for review, and The end-user or third parties cannot install additional software on this device. Sincerely, (Applicant signature) (Applicant printed name) Jason Sung Rev 1/26/2023 Booster Robotics Technology Co., Ltd Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 04-11-2026 Ref: Attestation Statements Part 2.911(d)(5)(ii) Filing FCC ID: 2BVIP-BRRC1DMBK [Booster Robotics Technology Co., Ltd] certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing “covered” equipment. Sincerely, (Applicant signature) (Applicant printed name) Jason Sung

Booster Robotics Technology Co., Ltd U.S. Agent Letter of Attestation To: Federal Communications Commission 7435 Oakland Mills Road, Columbia, MD 21046, USA Date: April 11, 2026 Ref: Attestation Statement – Part 2.911(d)(7) filing FCC ID: 2BVIP-BRRC1DMBK Booster Robotics Technology Co., Ltd (“the applicant”) certifies that, as of the date of the filing of the application, CLF Import and Export Limited (“the agent”) is our designated U.S. agent for service of process for the above reference FCC ID. The applicant accepts to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. The applicant further acknowledges it is our responsibility to inform the FCC whenever the agent information changes. CLF Import and Export Limited ("the agent) understand it is the agent's obligation to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and email address. Designated U.S. Agent Company Name: CLF Import and Export Limited FRN: 0033489683 Address: 1312 17th Street #692, Denver, CO 80202, United States Signature: Contact Person: David Chen Tel: +1 949 254 2565 Email: [email protected] Applicant Company Name: Booster Robotics Technology Co., Ltd FRN: 0038248480 Address: 301, Building 16, East Yongtaizhuang Village, Qinghe, Haidian District, Beijing, China Signature: Contact Person: Jason Sung Tel: +86-13049471678 Email: [email protected]

Booster Robotics Technology Co., Ltd Date: April 11, 2026 Product Model Number: BR-RC1-DM-BK FCC ID: 2BVIP-BRRC1DMBK To whom it may concern, Re: Product Certification Representative Authorization Letter We authorize QAI Laboratories Ltd. 3980 North Fraser Way, Burnaby B.C. Canada V5J 5K5 to act on our behalf on all matters concerning the above named equipment. This shall include the following:  Testing  Approval applications and procedures We declare that QAI Laboratories Ltd. is allowed to forward all information related to the approval project to the applied certification body and to the notification entities and to discuss any issues concerning the approval application. Any and all acts carried out by QAI Laboratories Ltd. on our behalf shall have the same effect as acts of our own. By: Jason Sung Contact Listed on FCC Wesbite Title: Manager Email: [email protected] Telephone: +86-13049471678 On behalf of: Booster Robotics Technology Co., Ltd

Booster Robotics Technology Co., Ltd Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: April 11, 2026 Subject; Request for Confidentiality FCC ID: 2BVIP-BRRC1DMBK To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description Tune-up Procedure Software Security Requirements for UNII devices It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: Jason Sung Title: Manager

Report No: SSP26030022-1&2E FCC ID: 2BVIP-BRRC1DMBK Annex of Test Report Annex A. EUT External Photos Model: BR-RC1-DM-BK EUT View 1 EUT View 2 Report No: SSP26030022-1&2E FCC ID: 2BVIP-BRRC1DMBK Annex of Test Report EUT View 3 EUT View 4 Report No: SSP26030022-1&2E FCC ID: 2BVIP-BRRC1DMBK Annex of Test Report EUT View 5 EUT View 6 Report No: SSP26030022-1&2E FCC ID: 2BVIP-BRRC1DMBK Annex of Test Report EUT View 7 EUT View 8

Report No: SSP26030022-1&2E FCC ID: 2BVIP-BRRC1DMBK Annex of Test Report Annex D. Label and Inf ormation FCC Label Sample FCC Labe Size: 40mm* 10mm FCC Label Specifications Text is Black in color and is justified. Labels are printed in indelible ink on permanent adhesive backing or silk-screened onto the EUT or shall be affixed at a conspicuous location on the EUT. Where the EUT is constructed in two or more sections connected by wires and marketed together, the above statement is required to be affixed only to the main control unit. When the EUT is so small or for such use that it is not practicable to place the statement on it, the above information shall be placed in a prominent location in the instruction manual or pamphlet supplied to the user or, alternatively, shall be placed on the container in which the device is marketed. FCC Label Location Label Location

Report No: SSP26030022-1&2E FCC ID: 2BVIP-BRRC1DMBK Annex of Test Report Annex B. EUT Internal Photos Model: BR-RC1-DM-BK EUT Internal View 1 EUT Internal View 2 FPCB antenna (433.6) Report No: SSP26030022-1&2E FCC ID: 2BVIP-BRRC1DMBK Annex of Test Report EUT Internal View 3 EUT Internal View 4 PCB antenna (BT) Report No: SSP26030022-1&2E FCC ID: 2BVIP-BRRC1DMBK Annex of Test Report EUT Internal View 5 EUT Internal View 6 Report No: SSP26030022-1&2E FCC ID: 2BVIP-BRRC1DMBK Annex of Test Report EUT Internal View 7 EUT Internal View 8 Report No: SSP26030022-1&2E FCC ID: 2BVIP-BRRC1DMBK Annex of Test Report EUT Internal View 9 EUT Internal View 10 Report No: SSP26030022-1&2E FCC ID: 2BVIP-BRRC1DMBK Annex of Test Report EUT Internal View 11 EUT Internal View 12 Report No: SSP26030022-1&2E FCC ID: 2BVIP-BRRC1DMBK Annex of Test Report EUT Internal View 13 EUT Internal View 14 Report No: SSP26030022-1&2E FCC ID: 2BVIP-BRRC1DMBK Annex of Test Report EUT Internal View 15 EUT Internal View 16 Report No: SSP26030022-1&2E FCC ID: 2BVIP-BRRC1DMBK Annex of Test Report EUT Internal View 17 EUT Internal View 18

FCC ID: 2BVIP-BRRC1DMBK RF Exposure Evaluation According to KDB 447498 D04 RF Exposure Procedures and Equipment Authorization Policies for Mobile and Portable Devices part 2.1.2, a single RF source is exempt RF device (from the requirement to show data demonstrating compliance to RF exposure limits, as previously mentioned) if the available maximum time-averaged power is no more than 1mW, regardless of separation distance. This exemption applies to all operating configurations and exposure conditions, for the frequency range 100 kHz to 100 GHz, regardless of fixed, mobile, or portable device exposure conditions. This is a standalone exemption, and it cannot be applied in conjunction with any other test exemption. The result is rounded to one decimal place for comparison Here, The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. For BLE Max Conducted Power(dBm) Tune-up Power(dBm) Max Tune-up Power(dBm) Max Power(mW) Frequency(MHz) Min. distance(mm) Calc. thresholds limit -3.54 -3(±1) -2 0.63 2402 5 0.19528 3.0 For 433.6MHz Frequency (MHz) Power (dBuV/m) Power (dBm) Power (mW) Limit (mW) 433.92 82.84 -12.36 0.06 1 Notes: 82.84dBuV/m-95.2=-12.36dBm 0.06mW＜1mW The device can transmit with433.6MHz and Bluetooth BLE simultaneously. Calculations for simultaneously transmit Mode Ratios Result Limit Result BLE 0.065 0.125 1 PASS 433.6MHz 0.06 Ratios = Power Density / Power density Limit so a SAR test is not required.

Productspecification QuickReferenceDate PCB Antenna Frequency 2.45GHz *1 Ant.PortInputPwr.(dBm)0(Typ.BTclass2outputpower) Tot.Rad.Pwr.(dBm)-2.3(Inputpwr–losspwr) Peak EIRP(dBi)1.7dBi Directivity(dBi)1 (alldirectionante nna) Efficiency(dB)-2.3(58.5%) Gain(dBi)1.7(Peak Gain XY-plane) MaximumPower(dBm)1.7 (XY-plane) MinimumPower(dBm)-4(XY-plane) Avg.Power(dBm)-0.5(XY-plane) Max/MinRatio(dB)5.3(XY-plane) Max/AvgRatio(dB)1.8(XY-plane) Min/AvgRatio(dB)-3.5(XY-plane) AverageGain(dB)-0.5(AvgGainXY-plane) All the technical data and information contained herein are subject to change without prior notice AntennaLayout&moduleonthesystemboard AntennaGain GainTable [email protected] PeakAvg.PeakAvg.PeakAvg. ModuleBoard 1.3-0.51.7-3.81.1-3.058.5% Type of Antenna: Manufacturer: Dongguan Qining Electronics Co.,LTD Address: 4th Floor, Building 5, Hong Kong Synthetic Group, No.1 Huili 2nd Road, Fenghuanggang, Tangxia Town, Dongguan City, China ReturnLoss TheEnvironmentofAntennaRadiationPattern 3Dradiationpatterndiagram XY-planeXZ-planeYZ-plane

Report No: SSP26030022-1E FCC Test Report Page 1 of 33 FCC TEST REPORT FCC ID: 2BVIP-BRRC1DMBK Report No. : SSP26030022-1E Applicant : Booster Robotics Technology Co., Ltd Product Name : Remote control Model Name : BR-RC1-DM-BK Test Standard : FCC Part 15.247 Date of Issue : 2026-04-11 Shenzhen CCUT Quality Technology Co., Ltd. 1F, Building 35, Changxing Technology Industrial Park, Yutang Street, Guangming District, Shenzhen, Guangdong, China; (Tel.:+86-755-23406590 website: www.ccuttest.com) This test report is limited to the above client company and the product model only. It may not be duplicated without prior permitted by Shenzhen CCUT Quality Technology Co., Ltd. Report No: SSP26030022-1E FCC Test Report Page 2 of 33 Test Report Basic Information Applicant..................................: Booster Robotics Technology Co., Ltd Address of Applicant...............: 301, Building 16, East Yongtaizhuang Village, Qinghe, Haidian District, Beijing, China Manufacturer..........................: Booster Robotics Technology Co., Ltd Address of Manufacturer........: 301, Building 16, East Yongtaizhuang Village, Qinghe, Haidian District, Beijing, China Product Name.........................: Remote control Brand Name.............................: - Main Model..............................: BR-RC1-DM-BK Series Models..........................: - Test Standard..........................: FCC Part 15 Subpart C KDB 558074 D01 15.247 Meas Guidance v05r02 ANSI C63.4-2014 ANSI C63.10-2020 Date of Test .............................: 2026-03-08 to 2026-03-31 Test Result...............................: PASS Tested By ................................: (Walker Wu) Reviewed By............................: (Lorzix Luo) Authorized Signatory............: (Lahm Peng) Note : This test report is limited to the above client company and the product model only. It may not be duplicated without prior permitted by Shenzhen CCUT Quality Technology Co., Ltd.. All test data presented in this test report is only applicable to presented test sample. Report No: SSP26030022-1E FCC Test Report Page 3 of 33 CONTENTS 1. General Information ....................................................................................................................................................5 1.1 Product Information .............................................................................................................................................5 1.2 Test Setup Information..........................................................................................................................................6 1.3 Compliance Standards ...........................................................................................................................................7 1.4 Test Facilities ........................................................................................................................................................7 1.5 List of Measurement Instruments ..........................................................................................................................8 1.6 Measurement Uncertainty .....................................................................................................................................9 2. Summary of Test Results ........................................................................................................................................... 10 3. Antenna Requirement ............................................................................................................................................... 11 3.1 Standard and Limit.............................................................................................................................................. 11 3.2 Test Result .......................................................................................................................................................... 11 4. Conducted Emissions ................................................................................................................................................ 12 4.1 Standard and Limit.............................................................................................................................................. 12 4.2 Test Procedure.................................................................................................................................................... 12 4.3 Test Data and Results .......................................................................................................................................... 13 5. Radiated Emissions ................................................................................................................................................... 16 5.1 Standard and Limit.............................................................................................................................................. 16 5.2 Test Procedure.................................................................................................................................................... 16 5.3 Test Data and Results .......................................................................................................................................... 18 6. Band-edge Emissions(Radiated) ............................................................................................................................... 22 6.1 Standard and Limit.............................................................................................................................................. 22 6.2 Test Procedure.................................................................................................................................................... 22 6.3 Test Data and Results .......................................................................................................................................... 22 7. Maximum…

Text truncated - open the document above for the full version.

Report No: SSP26030022-1&2E FCC ID: 2BVIP-BRRC1DMBK Annex of Test Report Annex C. Test Photos Conducted Emission Test View 1 Radiated Emission Test View 1 Report No: SSP26030022-1&2E FCC ID: 2BVIP-BRRC1DMBK Annex of Test Report Radiated Emission Test View 2