
Text extracted from the exhibit documents filed with the FCC. Open a document above to read the original.
In-car wireless CarPlay/Android Auto touchscreen HL-8368XU FCC Information This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment complies with FCC exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 20 cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Shenzhenshi Aotudakeji Youxian Gongsi Attestation Statements Not Covered EntityApplicant &Not Covered Equipment To: Federal Communications CommissionDate: Apr. 10, 26 7435 Oakland Mills Road, Columbia, MD 21046, USA Ref: Information Required by Section 2.911(d)(5)(i)& (ii) FCC ID: 2BVJRHL-8368XU Shenzhenshi Aotudakeji Youxian Gongsi (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List, established pursuant to § 1.50002 of reference chapter, as an entity producing “covered” communication equipment. The equipment for which authorization is sought is not “covered” telecommunications equipment and video surveillance equipment produced by entities identified on the Commission’s Covered List that prohibited from receiving an equipment authorization pursuant to section§ 2.903of the FCC rules. Sincerely yours, Applicant Signature Printed Name: Jianghua Ke Title:Manager Address: Room 401-B29, Jinli Commercial Plaza, No. 26 Jinpeng Road, Changlong Community, Buji Subdistrict, Longgang District, Shenzhen 518112, China Tel.: +8618565872750 Email: [email protected]
Shenzhenshi Aotudakeji Youxian Gongsi 1| P a g e Attestation Statements To: Federal Communications Commission Date: Apr. 10, 26 7435 Oakland Mills Road, Columbia, MD 21046, USA Subject: Attestation of Compliance with FCC Covered List Software Requirements FCC ID: 2BVJRHL-8368XU Product Name: In-car wireless CarPlay/Android Auto touchscreen This letter serves as an attestation that the equipment identified above ☐ is / ☒ is not (select one) "covered" software as defined under the Federal Communications Commission (FCC) Covered List requirements, as outlined in FCC 22-84 and KDB 986446. Specifically, the undersigned certifies that the equipment for which authorization is sought: 1. Does not contain cybersecurity or anti-virus software produced or provided by Kaspersky Lab, Inc. or any of its successors, assignees, parents, subsidiaries, affiliates, or any entity that has rebranded or relabeled software produced by the aforementioned entities. 2. Does not have the capability to store, run, or deliver any software identified on the FCC Covered List, including but not limited to cybersecurity and anti-virus software. To support this attestation, the appendixevaluation documentation has been prepared and is included in the certification filing. This attestation is based on a thorough evaluation of the device's design, functionality, and software environment. The undersigned affirms that the information provided is accurate and complete to the best of their knowledge. Sincerely yours, Applicant Signature Printed Name: Jianghua Ke Title:Manager Address: Room 401-B29, Jinli Commercial Plaza, No. 26 Jinpeng Road, Changlong Community, Buji Subdistrict, Longgang District, Shenzhen 518112, China Tel.: +8618565872750 Email: [email protected] Shenzhenshi Aotudakeji Youxian Gongsi 2| P a g e Evaluation regarding to the Covered List Software: Compliance Methodology Evaluation Process Results Device is Inherent compliance ☒ The Chipset(s) used is limited to run the Cybersecurity or anti-virus software. Compliance ☒ The Memory used is limited to run the Cybersecurity or anti-virus software. Compliance ☒ There is storage capacitylimitation for store or install the Cybersecurity or anti-virus software. Compliance ☐ Operatingsystem used is limited to run, install or deliver the Cybersecurity or anti-virus software. Compliance Device is not Inherent compliance ☐ Evaluation Based on Software Bill of Materials (SBoM) See attached “SBoM“ Note:The SBoM content is limited to the scope of covered list software (e.g. antivirus and cybersecurity software). ☐ Evaluation Based on Scan for Software on the device ☐ Evaluation Based on Filesystem scan ☐ Evaluation Based on Running software check SBOM (Software Bill of Materials) [For Device is not Inherent compliance] Section Component Name Version Supplier 1 2 3
Shenzhenshi Aotudakeji Youxian Gongsi (2026-04-10) Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Agent Authorization for FCC ID: 2BVJRHL-8368XU I, the undersigned, hereby authorize Shenzhen HongBiao Certification& Testing Co., Ltd to act on our behalfin all matters relating to this application for equipment certification. Any act carried out by Shenzhen HongBiao Certification& Testing Co., Ltd shall have the same effect as our own and I acknowledge that all responsibility for complying with the terms and conditions of certification, as specified by Shenzhenshi Aotudakeji Youxian Gongsi, still resides with Shenzhenshi Aotudakeji Youxian Gongsi We certify that we are not subject to a denial of federal benefits that includes FCC benefitspursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. §862, and that no partyto the application, as defined in 47 CFR §1.2002(b), is subject to a denial of federal benefits that includes FCC benefits pursuant to that section. Sincerely yours, Applicant Signature Printed Name: Jianghua Ke Title:Manager Address: Room 401-B29, Jinli Commercial Plaza, No. 26 Jinpeng Road, Changlong Community, Buji Subdistrict, Longgang District, Shenzhen 518112, China Tel.: +8618565872750 Email: [email protected]
Shenzhenshi Aotudakeji Youxian Gongsi Product Similarity Declaration Product name: In-car wireless CarPlay/Android Auto touchscreen Model name: HL-8368XU, HL_LINUX_NBT, HL_LINUX_CIC, HL_LINUX_CCC, HL_LINUX_5.0, HL_LINUX_4.5, HL_LINUX_4.0, HL_LINUX_MMI3G,HL_LINUX_MMI2G, HL_LINUX_EVO, HL_LINUX_MIB, HL_LINUX_MIB2 FCC ID: 2BVJRHL-8368XU We (Shenzhenshi Aotudakeji Youxian Gongsi) hereby state that all the models are electrical identical including the same software parameter and hardware design (i.e., circuit design, PCB Layout, RF module/circuit, antenna type(s) and antenna location, components on PCB, etc.,), same mechanical structure and design (including product enclosure, materials, etc.,), the only difference is the model name. Sincerely yours, Applicant Signature Printed Name: Jianghua Ke Title:Manager Address: Room 401-B29, Jinli Commercial Plaza, No. 26 Jinpeng Road, Changlong Community, Buji Subdistrict, Longgang District, Shenzhen 518112, China Tel.: +8618565872750 Email: [email protected]
Shenzhenshi Aotudakeji Youxian Gongsi (2026-04-10) Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Confidentiality Request for: FCC ID: 2BVJRHL-8368XU Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, we hereby requestpermanent confidential treatment of the exhibits accompanying thiscertification application as outlined below : ⎯ Block Diagram ⎯ Schematics ⎯ Operational Description The above exhibits contain trade secrets and/or proprietary information that are not publicly available and materials that the Applicant has spent considerable efforts in developing. Public disclosure of these may be harmful to the Applicant and give an unfair advantage to competitors on the market. Sincerely yours, Applicant Signature Printed Name: Jianghua Ke Title:Manager Address: Room 401-B29, Jinli Commercial Plaza, No. 26 Jinpeng Road, Changlong Community, Buji Subdistrict, Longgang District, Shenzhen 518112, China Tel.: +8618565872750 Email: [email protected]
Ext Photos Model: HL-8368XU Photo 1 Photo 2 Label&location Photo 3 Photo 4 Photo 5 Photo 6 Photo 7
Label and Label Location Model: HL-8368XU Label: In-car wireless CarPlay/Android Auto touchscreen Model NO.: HL-8368XU FCC ID: 2BVJRHL-8368XU Label Location: Label&location
Int Photos Model: HL-8368XU Photo 1 Photo 2 Photo 3 Photo 4 Photo 5 Photo 6 Photo 7 Photo 8 ANT
- Page 1 of 9 - Report No.: HB20260401005E-03 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen,China Tel: (86-755) 29989321 Fax: (86-755) 29985110 Web:www.sz-hongbiao.com RF EXPOSURE Test Report Product: In-car wireless CarPlay/Android Auto touchscreen Trade Mark: N/A Model Number: HL-8368XU, HL_LINUX_NBT, HL_LINUX_CIC, HL_LINUX_CCC, HL_LINUX_5.0, HL_LINUX_4.5, HL_LINUX_4.0, HL_LINUX_MMI3G, HL_LINUX_MMI2G, HL_LINUX_EVO, HL_LINUX_MIB, HL_LINUX_MIB2 FCC ID: 2BVJRHL-8368XU Prepared for Shenzhenshi Aotudakeji Youxian Gongsi Room 401-B29, Jinli Commercial Plaza, No. 26 Jinpeng Road, Changlong Community, Buji Subdistrict, Longgang District, Shenzhen 518112, China Prepared by Shenzhen HongBiao Certification& Testing Co., Ltd Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen, China Tel.: +86-755-2998 9321 Fax.: +86-755-2998 5110 Website: http://www.sz-hongbiao.com - Page 2 of 9 - Report No.: HB20260401005E-03 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen,China Tel: (86-755) 29989321 Fax: (86-755) 29985110 Web:www.sz-hongbiao.com Table of Contents 1 GENERAL DESCRIPTION ..................................................................................................................................... 5 1.1 DESCRIPTION OF EUT ................................................................................................................................................. 5 1.2 TEST MODE .............................................................................................................................................................. 5 1.3 TEST SETUP .............................................................................................................................................................. 5 2 TEST FACILITIES AND ACCREDITATIONS .............................................................................................................. 6 2.1 TEST LABORATORY ..................................................................................................................................................... 6 2.2 ENVIRONMENTAL CONDITIONS ..................................................................................................................................... 6 2.3 MEASUREMENT UNCERTAINTY ..................................................................................................................................... 6 2.4 TEST SOFTWARE ........................................................................................................................................................ 6 3 LIST OF TEST EQUIPMENT .................................................................................................................................. 7 4 RF EXPOSURE .................................................................................................................................................... 8 4.1 STANDALONE SAR TEST EXCLUSION CONSIDERATIONS........................................................................................................ 8 Limit ........................................................................................................................................................................... 8 Test Result ................................................................................................................................................................. 8 - Page 3 of 9 - Report No.: HB20260401005E-03 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen,China Tel: (86-755) 29989321 Fax: (86-755) 29985110 Web:www.sz-hongbiao.com TEST RESULT CERTIFICATION Applicant’s Name ................. : Shenzhenshi Aotudakeji Youxian Gongsi Address ................................. : Room 401-B29, Jinli Commercial Plaza, No. 26 Jinpeng Road, Changlong Community, Buji Subdistrict, Longgang District, Shenzhen 518112518112, China Manufacturer's Name .......... : Shenzhenshi Aotudakeji Youxian Gongsi Address ................................. : Room 401-B29, Jinli Commercial Plaza, No. 26 Jinpeng Road, Changlong Community, Buji Subdistrict, Longgang District, Shenzhen 518112, China Product description Product name ........................ : In-car wireless CarPlay/Android Auto touchscreen Model Number ....................... : HL-8368XU, HL_LINUX_NBT, HL_LINUX_CIC, HL_LINUX_CCC, HL_LINUX_5.0, HL_LINUX_4.5, HL_LINUX_4.0, HL_LINUX_MMI3G,HL_LINUX_MMI2G, HL_LINUX_EVO,HL_LINUX_MIB, HL_LINUX_MIB2 Standards ............................. : FCC CFR 47 PART 1, 1.1310 Test procedure ....................... : KDB 447498 D01 General RF Exposure Guidance v06 This device described above has been tested by Shenzhen HongBiao Certification& Testing Co., Ltd and the test results show that the equipment under test (EUT) is in compliance with the EMC requirements. And it is applicable only to the tested sample identified in the report. Date of Test ........................................... : Date (s) of performance of tests ............. : Apr 01, 2026~ Apr.08, 2026 Test Result .............................................. : Pass Testing Engineer : ( Z o e Su) Technical Manager : ( G a r y Lu) Authorized Signatory : (L e o S u) - Page 4 of 9 - Report No.: HB20260401005E-03 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen,China Tel: (86-755) 29989321 Fax: (86-755) 29985110 Web:www.sz-hongbiao.com Revision History Revised No. Date of Issue Description 01 Apr.08, 2026 Original - Page 5 of 9 - Report No.: HB20260401005E-03 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Roa…
Text truncated - open the document above for the full version.
- Page 1 of 53 - Report No.: HB20260401005E-01 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen,China Tel: (86-755) 29989321 Fax: (86-755) 29985110 Web:www.sz-hongbiao.com Test Report Product: In-car wireless CarPlay/Android Auto touchscreen Trade Mark: N/A Model Number: HL-8368XU, HL_LINUX_NBT, HL_LINUX_CIC, HL_LINUX_CCC, HL_LINUX_5.0, HL_LINUX_4.5, HL_LINUX_4.0, HL_LINUX_MMI3G, HL_LINUX_MMI2G, HL_LINUX_EVO, HL_LINUX_MIB, HL_LINUX_MIB2 FCC ID: 2BVJRHL-8368XU Prepared for Shenzhenshi Aotudakeji Youxian Gongsi Room 401-B29, Jinli Commercial Plaza, No. 26 Jinpeng Road, Changlong Community, Buji Subdistrict, Longgang District, Shenzhen 518112, China Prepared by Shenzhen HongBiao Certification& Testing Co., Ltd Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen, China Tel.: +86-755-2998 9321 Fax.: +86-755-2998 5110 Website: http://www.sz-hongbiao.com - Page 2 of 53 - Report No.: HB20260401005E-01 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen,China Tel: (86-755) 29989321 Fax: (86-755) 29985110 Web:www.sz-hongbiao.com Table of Contents 1 GENERAL DESCRIPTION ..................................................................................................................................... 6 1.1 DESCRIPTION OF EUT ................................................................................................................................................. 6 1.2 TEST MODE .............................................................................................................................................................. 6 1.3 OPERATION CHANNEL LIST .......................................................................................................................................... 6 1.4 TEST SETUP .............................................................................................................................................................. 7 1.5 POWER SETTING CONFIGURATION PARAMETERS ............................................................................................................... 7 1.6 ANCILLARY EQUIPMENT .............................................................................................................................................. 7 2 SUMMARY OF TEST RESULT ............................................................................................................................... 9 3 TEST FACILITIES AND ACCREDITATIONS .............................................................................................................10 3.1 TEST LABORATORY ................................................................................................................................................... 10 3.2 ENVIRONMENTAL CONDITIONS ................................................................................................................................... 10 3.3 MEASUREMENT UNCERTAINTY ................................................................................................................................... 10 3.4 TEST SOFTWARE ...................................................................................................................................................... 11 4 LIST OF TEST EQUIPMENT .................................................................................................................................12 5 TEST ITEM AND RESULTS ...................................................................................................................................14 5.1 ANTENNA REQUIREMENT .......................................................................................................................................... 14 5.1.1 Standard Requirement ............................................................................................................................. 14 5.1.2 Test Result ................................................................................................................................................. 14 5.2 CONDUCTED EMISSION ............................................................................................................................................. 15 5.2.1 Limits ........................................................................................................................................................ 15 5.2.2 Test Procedures ......................................................................................................................................... 15 5.2.3 Test Setup ................................................................................................................................................. 16 5.2.4 Test Result ................................................................................................................................................. 16 5.3 RADIATED EMISSION ................................................................................................................................................ 17 5.3.1 Limits ........................................................................................................................................................ 17 5.3.2 Test Procedures ......................................................................................................................................... 17 5.3.3 Test Setup ................................................................................................................................................. 17 5.3.4 Test Result ................................................................................................................................................. 18 5.3.5 Radiated Band Edge ..............................…
Text truncated - open the document above for the full version.