2BVLN-QSQingo Al Vending

QS-509CREW(G)-US All packaging materials must be disposed of in an environmentally responsible manner.- Cardboard packaging can be recycled as waste paper. The protective films and foam Packaging Disposal FCC Warnning: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection againstharmful interference in a residential installation. This equipment generates, uses and can radiateradio frequency energy and, if not installed and used in accordance with the instructions, maycause harmful interference to radio communications. However, there is no guarantee thatinterference will not occur in a particular installation. If this equipment does cause harmfulinterference to radio or television reception, which can be determined by turning the equipmentoff and on, the user is encouraged to try to correct the interference by one or more of thefollowing measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. ISED Statement ‐ English: This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device. ‐ French:Cet appareil contient des émetteurs/récepteurs exempts de licence qui sont conformes aux CNR exempts de licence d’Innovation, Sciences et Développement économique Canada. Le fonctionnement est soumis aux deux conditions suivantes : (1) Cet appareil ne doit pas causer d’interférences. (2) Cet appareil doit accepter toute interférence, y compris les interférences susceptibles de provoquer un fonctionnement indésirable de l’appareil. This equipment complies with Canada radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Cet équipement est conforme Canada limites d'exposition aux radiations dans un environnement non contrôlé. Cet équipement doit être installé et utilisé avec une distance minimale de 20 cm entre le radiateur et votre corps. The device for operation in the band 5150–5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems. L'appareil destiné à fonctionner dans la bande 5150-5250 MHz est uniquement destiné à une utilisation en intérieur afin de réduire le potentiel d'interférences nuisibles aux systèmes mobiles par satellite cocanaux

customer service+1 626 493 6836 [email protected] QS-779CREW(G)-US Qingo Vending Cabinet User Manual 1. Keep this manual for future reference. If the device is transferred to another user, this manual must be provided together with the equipment. 2. This device is heavy. To prevent personal injury or equipment damage, unpacking and installation must be performed by two people. 3. Do not use a damaged device. If damage is found, immediately disconnect the power and contact the supplier. 4. Strictly follow the connection and installation instructions provided in this manual. 5. This device is intended only for its designated purpose and is suitable for commercial use only. 6. The manufacturer assumes no liability for damage caused by improper use or failure to comply with these instructions. 7. Indoor use only, unless otherwise specified. 8. Risk of electric shock! Do not attempt to repair the device yourself. All servicing must be performed by authorized service personnel. 9. Regularly check the power plug and power cord for damage. If damaged, it must be replaced by the manufacturer, authorized service personnel, or similarly qualified profes- sionals. 10. Regularly check the power plug and power cord for damage. If damaged, it must be replaced by the manufacturer, authorized service personnel, or similarly qualified profes- sionals. 11. Protect the power cord from damage. Do not squeeze, bend, or allow it to contact sharp edges, hot surfaces, or open flames. 12. The grounding wire must be connected to an equipotential bonding terminal by a qualified technician. 13. For safety, connect the device only to a properly grounded power outlet. If electric shock is detected when touching the device, immediately unplug it. 14. Do not pull the power cord to unplug the device. Always grasp the plug. Do not wrap the power cord around the device. 15. This device must be grounded. 16. Route the power cord properly to prevent accidental pulling or tripping. 17. The power outlet must be easily accessible for immediate disconnection in emergen- cies. 18. Do not use accessories not recommended by the manufacturer. Only original accesso- ries may be used. 19. Once connected to power, the device is energized. 20. Warning! Do not insert any objects into the device housing. 21. Do not disassemble the device housing. 22. Do not block or cover ventilation openings. Ensure adequate ventilation at all times.23 23. If the light cover becomes loose or damaged, disconnect the power immediately and contact professional service personnel. 24.This device may be used by children aged 8 years and above, and by persons with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, only under supervision and after receiving safety instructions. Children must not play with the device. Cleaning and maintenance must not be performed by children without supervi- sion. 25. Do not touch or operate the device with wet hands or on wet floors. 26. Warning! Do not immerse the device in water or other liquids, and do not clean it using a hose. 27. If water enters the device, immediately disconnect the power and have it inspected by professionals before reuse. 28. Always disconnect the power before cleaning or when the device is not in use. 29. Do not store flammable, explosive, volatile, or corrosive substances inside the device. High-proof alcohol must be stored upright and sealed. Flammable containers may leak at low temperatures and ignite due to electrical sparks. 30. Prevent chemicals from entering the device. 31. Warning! This product is a container-type food storage device. Do not place unpack- aged food directly inside. 32. Oil leakage may damage rubber seals. Oily products must be properly packaged to prevent leakage. 33. Keep the device away from high-temperature surfaces and open flames. 34. Place the device on a level, stable, clean, heat-resistant, and dry surface. 35. Do not use the device near flammable or explosive vapors. 36. For outdoor installations, ensure sufficient overhead shelter to prevent rain ingress. Maintain proper ventilation and keep air inlets and outlets unobstructed. Regularly inspect the power cord and plug. 37. Do not damage components containing refrigerant (e.g., puncturing, crushing, twisting, or scratching). 38. Fire hazard! In case of refrigerant leakage, unplug the device immediately, remove ignition sources, ventilate the area, and contact the supplier. Avoid eye contact with refrigerant. 39. In case of fire, disconnect the power before firefighting. Warning! Never splash water on an energized device. 40. Do not use mechanical devices, heat sources, or other methods to accelerate defrost- ing. Before using this device, please read this manual carefully and follow all safety instructions to avoid damage caused by improper use. 12 °F Refrig 41. Do not use this device inside enclosed compartments. 42.Use protective measures (e.g., gloves) when touching cold surfaces or refrigerated products for extended periods. 43. Do not place hot food directly into the device. 44. To maintain food freshness and prevent odors, all food must be properly sealed. Do not consume food stored for excessive periods. 45. Maximum shelf load: 110 lbs (50 kg). This device is intended for commercial cooling and storage of food and beverages only. Cabinet Housing Glass Door Ventilation Openings Wire Shelves Card Reader Lock LED Light Strip Lower Front Panel Adjustable Feet Casters Cooling Indicator Light Indicator Light Temperature Down Button Temperature Up Button LED Display Power Cord with Plug Internal Compartments 34 · Remove all packaging and clean the device. · For outdoor placement, ensure proper waterproof protection for the top and smart compo- nents. · Place the device on a flat, level surface. Do not tilt the unit. · Do not install in an enclosed space. Leave at least 2 inches (5 cm) clearance from the back wall and keep the top ventilation unobstructed. · After transportatio…

Text truncated - open the document above for the full version.

Wuhan Qinggou Intelligent Technology Co., Ltd. No. 64, Jiukang Avenue, Caidian Economic Development Zone,Caidian District Wuhan City, Hubei Province 430120 China 2.911 (d)(5)(i) Equipment Type Attestation v1.2 Section 2.911(d)(5)(i) Certification – Equipment Type Company name: Wuhan Qinggou Intelligent Technology Co., Ltd. Address: No. 64, Jiukang Avenue, Caidian Economic Development Zone,Caidian District Wuhan City, Hubei Province 430120 China Product Name: Qingo Al Vending FCC ID: 2BVLN-QS Model(s): QS-779CREW(G)-US, QS-509CREW(G)-US, QS-509CRSW(G)-US, QS-779CRSW(G)-US 2.911(d)(5)(i) Equipment Type We, [Insert applicant name] (“the applicant”) certify that the equipment for which authorization is sought through certification is not: • Prohibited from receiving an equipment authorization pursuant to § 2.903; of the FCC rules. • Identified as an equipment type in the “Covered List” NOTE 1 Yours sincerely, Name: Yang Liu Date: 2026-4-11 Title and Company name: Legal Person/ Wuhan Qinggou Intelligent Technology Co., Ltd. NOTE 1 “Covered List”; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References; 1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the

2.911 (d)(5)(ii) Applicant Attestation v1.3 Wuhan Qinggou Intelligent Technology Co., Ltd. No. 64, Jiukang Avenue, Caidian Economic Development Zone,Caidian District Wuhan City, Hubei Province 430120 China Section 2.911(d)(5)(ii) Certification – Applicant (Covered List ) Company name: Wuhan Qinggou Intelligent Technology Co., Ltd. Addr ess: No. 64, Jiukang Avenue, Caidian Economic Development Zone,Caidian District Wuhan City, Hubei Province 430120 China Product Name: Qingo Al Vending FCC ID: 2BVLN-QS Model(s): QS-779CREW(G)-US, QS-509CREW(G)-US, QS-509CRSW(G)-US, QS-779CRSW(G)-US 2.911(d)(5)(ii) Applicant filing We, [Insert applicant name] (“the applicant”) certify that, as of the date of the filing of the application, the applicant is not identified NOTE 1 on the “Covered List” NOTE 2 , established pursuant to § 1.50002 of this chapter, as an entity producing covered communications equipment. Yours sincerely, Name: Yang Liu Date: 2026-4-11 Title and Company name: Legal Person/ Wuhan Qinggou Intelligent Technology Co., Ltd. NOTE 1 Delete option not applicable to this application. NOTE 2 “Covered List”; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References; 1)986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the

Wuhan Qinggou Intelligent Technology Co., Ltd. No. 64, Jiukang Avenue, Caidian Economic Development Zone,Caidian District Wuhan City, Hubei Province 430120 China Letter of Authorization Company: Wuhan Qinggou Intelligent Technology Co., Ltd. Address: No. 64, Jiukang Avenue, Caidian Economic Development Zone,Caidian District Wuhan City, Hubei Province 430120 China FCC ID: 2BVLN-QS Model Number(s): QS-779CREW(G)-US, QS-509CREW(G)-US, QS-509CRSW(G)-US, QS-779CRSW(G)-US Product Description: Qingo Al Vending We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Sincerely, Name/Title： Yang Liu/Legal Person Company: Wuhan Qinggou Intelligent Technology Co., Ltd. Address: No. 64, Jiukang Avenue, Caidian Economic Development Zone,Caidian District Wuhan City, Hubei Province 430120 China Phone: 17764008898 Fax: N/A E-Mail: [email protected]

Wuhan Qinggou Intelligent Technology Co., Ltd. No. 64, Jiukang Avenue, Caidian Economic Development Zone,Caidian District Wuhan City, Hubei Province 430120 China Date: 2026-4-11 FCC ID: 2BVLN-QS Dear Sir/Madam, We, Wuhan Qinggou Intelligent Technology Co., Ltd. Hereby declares the following statement for Federal Communications Commission, PCB board, circuit, structure and internal of these model(s) are the same, Only model number size and appearance are different for these model. Product name: Qingo Al Vending Model no.: QS-779CREW(G)-US, QS-509CREW(G)-US, QS-509CRSW(G)-US, QS-779CRSW(G)- US Sincerely, Name/Title： Yang Liu/Legal Person Company: Wuhan Qinggou Intelligent Technology Co., Ltd. Address: No. 64, Jiukang Avenue, Caidian Economic Development Zone,Caidian District Wuhan City, Hubei Province 430120 China Phone: 17764008898 Fax: N/A E-Mail: [email protected]

Wuhan Qinggou Intelligent Technology Co., Ltd. No. 64, Jiukang Avenue, Caidian Economic Development Zone,Caidian District Wuhan City, Hubei Province 430120 China Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 2026-4-11 Subject; Request for Confidentiality FCC ID: 2BVLN-QS Product name: Qingo Al Vending Model no.: QS-779CREW(G)-US, QS-509CREW(G)-US, QS-509CRSW(G)-US, QS- 779CRSW(G)-US To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description Tune-up Procedure In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s); External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Wuhan Qinggou Intelligent Technology Co., Ltd. No. 64, Jiukang Avenue, Caidian Economic Development Zone,Caidian District Wuhan City, Hubei Province 430120 China Sincerely, Name/Title： Yang Liu/Legal Person Company: Wuhan Qinggou Intelligent Technology Co., Ltd. Address: No. 64, Jiukang Avenue, Caidian Economic Development Zone,Caidian District Wuhan City, Hubei Province 430120 China Phone: 17764008898 Fax: N/A E-Mail: [email protected]

FCC ID: 2BVLN-QS External Photos of the EUT QS-779CREW(G)-US, QS-779CRSW(G)-US QS-779CREW(G)-US, QS-779CRSW(G)-US QS-509CREW(G)-US, QS-509CRSW(G)-US FCC ID: 2BVLN-QS FCC ID: 2BVLN-QS FCC ID: 2BVLN-QS QS-509CREW(G)-US, QS-509CRSW(G)-US FCC ID: 2BVLN-QS FCC ID: 2BVLN-QS FCC ID: 2BVLN-QS

Label and Location Size: L: 4.0cm*W: 3.0cm Label and Location FCC ID : 2BVLN-QS IC: 35422-QS HVIN: QS-779CREW(G)-US FCC ID : 2BVLN-QS IC: 35422-QS HVIN: QS-509CRSW(G)-US Label and Location

FCC ID: 2BVLN-QS Internal Photos of the EUT QS-779CREW(G)-US, QS-779CRSW(G)-US FCC ID: 2BVLN-QS FCC ID: 2BVLN-QS LTE Antenna FCC ID: 2BVLN-QS WIFI Antenna FCC ID: 2BVLN-QS FCC ID: 2BVLN-QS FCC ID: 2BVLN-QS FCC ID: 2BVLN-QS QS-509CREW(G)-US, QS-509CRSW(G)-US FCC ID: 2BVLN-QS FCC ID: 2BVLN-QS FCC ID: 2BVLN-QS FCC ID: 2BVLN-QS FCC ID: 2BVLN-QS FCC ID: 2BVLN-QS FCC ID: 2BVLN-QS FCC ID: 2BVLN-QS

Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn RF Exposure MPE Report Reference No. .................... : FCC ID. ........................................... : CTA26030400808 2BVLN-QS Compiled by ( position+printed name+signature) . : File administrators Zoey Cao Supervised by ( position+printed name+signature) . : Project Engineer Ace Chai Approved by ( position+printed name+signature) . : RF Manager Eric Wang Date of issue .................................... : Mar. 23, 2026 Testing Laboratory Name.............. : Shenzhen CTA Testing Technology Co., Ltd. Address ........................................... : Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Applicant’s name ........................... : Wuhan Qinggou Intelligent Technology Co., Ltd. Address ........................................... : No. 64, Jiukang Avenue, Caidian Economic Development Zone, Caidian District, Wuhan City, Hubei Province, China Standard........................................... : 47CFR §1.1310 47CFR §2.1091 KDB447498 D01 General RF Exposure Guidance v06 Shenzhen CTA Testing Technology Co., Ltd. All rights reserved. This publication may be reproduced in whole or in part for non-commercial purpses as long as the Shenzhen CTA Testing Technology Co., Ltd. is acknowledged as copyright owner and source of the material. Shenzhen CTA Testing Technology Co., Ltd. takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. Test item description ..................... : Qingo Al Vending Trade Mark ....................................... : N/A Manufacturer .................................... : Wuhan Qinggou Intelligent Technology Co., Ltd. Model/Type reference ...................... : QS-779CREW(G)-US Listed Models ................................... : QS-509CREW(G)-US, QS-509CRSW(G)-US, QS-779CRSW(G)-US Rating ............................................... : AC 120V, 60Hz Result ............................................... : PASS Report No.: CTA26030400808 Page 2 of 10 Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn T E S T R E P O R T Equipment under Test : Qingo Al Vending Model /Type : QS-779CREW(G)-US Listed Models : QS-509CREW(G)-US, QS-509CRSW(G)-US, QS-779CRSW(G)-US Model difference : The PCB board, circuit, structure and internal of these models are the same, Only model number size and appearance are different for these model. Applicant : Wuhan Qinggou Intelligent Technology Co., Ltd. Address : No. 64, Jiukang Avenue, Caidian Economic Development Zone, Caidian District, Wuhan City, Hubei Province, China Manufacturer : Wuhan Qinggou Intelligent Technology Co., Ltd. Address : No. 64, Jiukang Avenue, Caidian Economic Development Zone, Caidian District, Wuhan City, Hubei Province, China Test Result: PASS The test report merely corresponds to the test sample. It is not permitted to copy extracts of these test result without the written permission of the test laboratory. Report No.: CTA26030400808 Page 3 of 10 Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn Contents 1 TEST STANDARDS ............................................................................................................ 4 2 SUMMARY .......................................................................................................................... 5 2.1 General Remarks ..................................................................................................... 5 2.2 Product Description ................................................................................................. 5 2.3 Special Accessories ................................................................................................. 6 2.4 Modifications ............................................................................................................ 6 3 TEST ENVIRONMENT ....................................................................................................... 7 3.1 Address of the test laboratory .................................................................................. 7 3.2 Test Facility .............................................................................................................. 7 3.3 Statement of the measurement uncertainty ............................................................. 7 4 Test limit .............................................................................................................................. 8 4.1 Requirement ............................................................................................................ 8 4.2 MPE Calculation Method ......................................................................................... 8 4.3 Conducted Power Results ....................................................................................... 8 4.4 Manufacturing tolerance .......................................................................................... 9 4.5 Standalone MPE Result ......................................................................................... 10 4.6 Simultaneous Transmission for MPE Result ......................................................... 10 5 Conclusion ........…

Text truncated - open the document above for the full version.

1. Antenna Description: Antenna type PCB Antenna Model QS-779CREW(G)-US Frequency range 2400-2500MHz, 5180-5240MHz, 5745-5825MHz Manufacturer Wuhan Qinggou Intelligent Technology Co., Ltd. Address No. 64, Jiukang Avenue, Caidian Economic Development Zone, Caidian District, Wuhan City, Hubei Province, China ANT Peak Gain 0.90 dBi for 2400-2500MHz 0.93 dBi for 5180-5240MHz 0.98 dBi for 5745-5825MHz 2. Antenna Photo: Length :4.71mm Width:14.74mm 3. Test Equipment & Conditions 3.1 Test instrument VSWR is tested using Agilent E5071B connected to a hand mechanism, and the status is free space. 3.2 Test environment and methods 4．Antenna Radiation Pattern 2400MHz 2450MHz 2500MHz 5180MHz 5220MHz 5240MHz 5745MHz 5785MHz 5825MHz

Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn FCC PART 15 SUBPART C TEST REPORT FCC PART 15.247 Report Reference No. .................... : FCC ID. .......................................... : CTA26030400801 2BVLN-QS Compiled by ( position+printed name+signature) . : File administrators Zoey Cao Supervised by ( position+printed name+signature) . : Project Engineer Ace Chai Approved by ( position+printed name+signature) . : RF Manager Eric Wang Date of issue .................................... : Mar. 24, 2026 Testing Laboratory Name ............. : Shenzhen CTA Testing Technology Co., Ltd. Address ............................................ : Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Applicant’s name ........................... : Wuhan Qinggou Intelligent Technology Co., Ltd. Address ............................................ : No. 64, Jiukang Avenue, Caidian Economic Development Zone, Caidian District, Wuhan City, Hubei Province, China Test specification.......................... : Standard .......................................... : FCC Part 15.247 TRF Originator ................................. : Shenzhen CTA Testing Technology Co., Ltd. Shenzhen CTA Testing Technology Co., Ltd. All rights reserved. This publication may be reproduced in whole or in part for non-commercial purposes as long as the Shenzhen CTA Testing Technology Co., Ltd. is acknowledged as copyright owner and source of the material. Shenzhen CTA Testing Technology Co., Ltd. takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. Test item description .................... : Qingo Al Vending Trade Mark ....................................... : N/A Manufacturer .................................... : Wuhan Qinggou Intelligent Technology Co., Ltd. Model/Type reference ...................... : QS-779CREW(G)-US Listed Models ................................... : QS-509CREW(G)-US, QS-509CRSW(G)-US, QS-779CRSW(G)-US Modulation Type .............................. : CCK/DSSS/OFDM Operation Frequency ....................... : From 2412 - 2462MHz Rating ............................................... : AC 120V, 60Hz Result ............................................... : PASS Report No.: CTA26030400801 Page 2 of 60 Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn T E S T R E P O R T Equipment under Test : Qingo Al Vending Model /Type : QS-779CREW(G)-US Listed Models : QS-509CREW(G)-US, QS-509CRSW(G)-US, QS-779CRSW(G)-US Model difference : The PCB board, circuit, structure and internal of these models are the same, Only model number size and appearance are different for these model. Applicant : Wuhan Qinggou Intelligent Technology Co., Ltd. Address : No. 64, Jiukang Avenue, Caidian Economic Development Zone, Caidian District, Wuhan City, Hubei Province, China Manufacturer : Wuhan Qinggou Intelligent Technology Co., Ltd. Address : No. 64, Jiukang Avenue, Caidian Economic Development Zone, Caidian District, Wuhan City, Hubei Province, China Test Result: PASS The test report merely corresponds to the test sample. It is not permitted to copy extracts of these test result without the written permission of the test laboratory. Report No.: CTA26030400801 Page 3 of 60 Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn Contents 1 TEST STANDARDS ...................................................................................................................................... 4 2 SUMMARY .................................................................................................................................................... 5 2.1 General Remarks .............................................................................................................................. 5 2.2 Product Description ........................................................................................................................... 5 2.3 Equipment Under Test ....................................................................................................................... 5 2.4 Short description of the Equipment under Test (EUT) ...................................................................... 5 2.5 EUT configuration .............................................................................................................................. 6 2.6 EU…

Text truncated - open the document above for the full version.